Urgent Black Out again

I noticed that the preferences pane in Bridge is unreadable, it has a black background to it and so I cannot read or change anything.
I have re-installed from my Cloud account and it's still the same.
Is this a problem with the software?
Can someone let me know if they have encountered the same problem in Bridge.

Please post your issue in the Bridge forum here http://forums.adobe.com/community/bridge. They will be able to help you.

Similar Messages

  • Why does my Ipad keep going black and then back to the apple logo.  It eventually goes to the start page but then blacks out again.  I have already rebooted several times with no luck!!

    Why does my Ipad 2 keep going black ahd back to the apple logo.  It eventually goes to the home screen and allows me to try something else but after about 30 seconds it happens again.  I have already rebooted several times? 

    Make Sure iOS is updated to the latest version
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • Macbook air 11" blacks out takes minutes to start back up again.

    I have had this problem on and off since last November. First started when I using a LCD projector and I thought that was the issue. Last time it did it was last night...did it a number of times in succession. Now I am flipped out because this the my travel laptop. I will be working on ti, it blacks out and shuts down. Sometimes it stays down for a minute other time it stays that way for longer.
    Is someone else having this problem?

    HI..
    Try a Safe Mode boot.
    Startup your Mac in Safe Mode
    A Safe Mode boot takes much longer than a normal boot so be patient.
    Once you are in Safe mode, click Restart from the Apple  drop down menu.
    Then monitor to see if the Mac blacks out again.

  • Screen blacks out after a few seconds and won't return to normal state.

    I have the 30 gig ipod photo that i got about a year and a half ago. Whenever I look at the screen to access music or anything, the screen blacks out like there's a screensaver or something and won't return back to normal. Even after I reset it, it stays normal for a few seconds and then blacks out again. The backlighting still works so it's just a bright black screen and I have function of the click wheel because it clicks everytime I move up or down. I already tried restoring it so I am all out of options. Anyone PLEASE HELP!!! Thanks
    Steve

    This happens rarely but consistently! I't seems to happen about 5% of the time waking from sleep. It MAY be more prone to happen if I had been moving with it in my bag, but it can happen at any waking time after any duration of sleep.

  • G5 HP Monitor blacks out, says No Input Signal

    This happens when the computer warms up, goes away after sleep, but always comes back. Problem compounded by the computer telling me my GeForce FX 5200 graphic card status is "No display connected." What stupid thing have I done or not done. Computer's new, a dual 1.8, so I don't know my way around it; not that I'm at all tekkie. Any obvious help come to mind? Thanx.

    I get the video back by either turning "Source" on the monitor off and then clicking it back on, or turning the monitor power off and then turning it back on. In either case, I'll usually get another five to eight minutes before the monitor blacks out again. If I repeat the process, the interval between blackouts gets shorter and shorter until I cave in, put the computer to sleep and come back in fifteen or twenty minutes, after which I get a pretty good run again, fifteen to twenty minutes. Because I do a lot of writing, it's a process of mental harrassment having my train of thought broken. I'm developing a flinch in anticipation, which sure don't make for limpid prose.
    I've only had the computer for two months, so it has never occurred to me to vacuum it. You really think that might help?
    Can't say how grateful I am to you experts for your attention and advice.
    Will

  • Sony monitor attached to iMac suddenly blacks out

    I have had a Sony monitor (model SDM-HS74P) attached to my iMac for over a year (and prior to that to my old iMac for several years) with no problem. Yesterday out of nowhere it blacks out. I have tried some troubleshooting things as per the Sony guides, but those seem to indicate that the monitor is fine. The power button on the Sony is on and green; I've made no changes to settings or cables. If I put my computer to sleep and then bring it out of sleep, you see the Sony monitor's desktop briefly, but then it blacks out again. If I turn the Power button on the Sony monitor on and off, same thing, you see the desktop briefly and then it blacks out again. (The Sony monitor also has a little grey box that appears that has "Input2: HD15" in it which then disappears (it's always done that) in case that's relative.) I have not changed anything in my Display Preferences either. I am currently running OSX 10.8.4 and wonder if in updating the OS something got messed up. Does anyone have any advice for me? Thank you.

    Hmmm, 10.8.4 was supposed to have "fixes" for monitor problems.
    Open Console in Utilities & see if there are any clues or repeating messages when this blackout happens.

  • Can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button

    We can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button. Everything seems to be plugged in well. The picture even starts out being sort of dim. And it goes through phases of working fine but then will randomly start blacking out again.  Any ideas?

    Welcome to the Apple Community.
    Have you tried turning the TV off and on again.

  • Why is addressbar blacked out. New Xubuntu 14.04 install.

    I installed Xubuntu 14.04 on a Pentium P4 desktop. (32 bit. Motherboard graphics. VGA drives flatscreen.) Firefox has no addons. Deafult theme. It is in safe mode. System is updated today. 12 June 2014.
    On every site the Firefox address bar is blacked out. As I type the address or query the first few letters are visible, then if I pause or press enter, the bar blacks out. I can move the left arrow key over the text and that exposes the text, but as soon as I try to edit that address, it is all blacked out again.
    This behavior has been the same since I installed this OS more than a month ago, through several xubuntu updates.
    On an earlier install a partial solution was to use a different theme.

    I remember seeing this a while ago and it had to do with an add-on although I don't remember it. Two things you can do though.
    Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
    *'''Windows/Mac''': Go to Help > Restart with add-ons disabled
    *'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
    If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.
    Or just one.

  • Why does my computer screen black out

    Re: Forums
          I'm using an Hp Pavilion Slim Line s5260f desk top pc.  I have posted this thread several weeks ago.  It seems that I loose my screen on occassion while I am operating my computer.  When this happenes  the computer blacks out and my screen turns into a very dark shade of blue almost black. Having to force shut down the computer to turn it on again.   In the past I have changed my monitor which worked for a while.  Another time a short while ago when this happened  I unpluged the power chord and the chord going from my monitor to my tower  and plugged them in again which worked for a while   It has blacked out again.  I am asking if anyone has an idea of why this happens on occasion so I can try to address this issue be it now or the next time it happens.  I am also hoping that I have posted this question in the proper catogory in the Hp forum.  Thank you Jerry. 

    JrJerry,
    Is this the Nvidia driver update that failed to install? It should install.
    Working on instructions for event viewer (event viewer may be a dead end) but could you send a screenshot of Device Manager?
    Go to Control Panel - Device Manager. Then use Microsoft's snipping tool.
    It should look like this ( image ).
    I am interested in the display adapter. This image is an example of a system with no device errors.
    Please open an admin command prompt. Then enter this command: sfc /scannow  
    One last thought, roughly when did you purchase your system and when did this problem start? If the system was fine until recently and the Nvidia drivers (software) are corrupted then a restore should correct the problem. I would only suggest this course of action after all else fails, especially not being able to update the Nvidia drivers. If the problems remains after a restore then it is hardware or heat related.
    We may have to restore the system back the factory image. Did you create an HP Recovery Disk set?
    Make sure you back up all important data as a system recovery will reformat your harddrive and, in the process, erase all data and programs you have installed since you purchased the computer.
    If we can't solve this problem maybe one or more of the other very knowledgeable forum members can assist.
    One last point, in an earlier reply I had suggested you try DVI if currently using VGA and vice versa. This was suggested to eliminate a possible flakey input-output vga or dvi port connection to the mainboard. This would indicate a mainboard failure. The only solution would be to replace the mainboard with the same type (correctly tatooed HP) mainboard. It may be cheaper to replace the system if this is the case.
    Jaco
    Errare humanum est.

  • My macbook pro blacks out??!

    Hi i have a macbook pro, and every so often when i have left it turned on but closed for a short while, when i try to wake it up it keeps blacking out, but the fans are still going. So i usually just hold the off button for ages until it turns off and then when i turn it on again, its fine... ...for about 30 seconds, until it blacks out again. It usually blacks out while i am trying to reconnect to the internet; i find that i cannot get internet when its about to black out. Usually even after restarting about 4 times it just does not stay on, and then after I leave it for a while, I come back and open it, and it works fine! Is there anything you think I can do that will immediately stop it from blacking out? Also, sometimes when I have left it for a while and come back, when i try to wake it up it stays black for agggeesss with the rainbow circle loading thing, but I can easily make it work just by turning it off and on again, but even though are these problems related? Is it anything to do with the battery? Thankyou!
    ps i know my macbook is OSX if that helps

    If MBP does not respond properly to display lid opening and closing, reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • S200 screen blacks out when lid opened; lid closed it turns on!

    This is badder than bad for a problem. When I open the netbook lid, the screen blanks out. This even happens at the boot stage immediately after pressing power button, so that the BIOS screen goes black when I open the lid. On closing the lid though, hey, the screen turns on. If it manages to boot the OS and I open the lid, the screen will black out. Then I close it and it turns on, but often opening it again and the netbook sleeps. A while ago, after that stage of the netbook sleeping, I could open the lid, hit Enter and get it to wake up and then I had roughly 1.5 min to do some work - perhaps longer I didn't actually time it. Now, however, it blacks out again after wake up (and its very hard to shut it down using a pencil reaching the power button!) I've opened the back off the netbook and try to find the lid switch, but I'm still not sure where it is - so that I could disable it completely. I'd prefer not to take it to the service center as warranty is over and I already had a $50 repair with Lenovo, so doing it once more is not really worth it. OS is Linux Ubuntu - and in all the Power settings I set it to do nothing when lid is closed. Any help would be appreciated!

    Well, I had the idea of using a magnet to find out if the S200 uses a magnetic lid switch.
    I ran it around the edges of lid and outside of keyboard and front... and suddenly, just by the Backspace key it was, the screen came back to life!
    As i had the case opened I looked at what part was inside just there, and its the small usb/card-reader board.  I couldn't tell if there was a lid switch component there though - but after I touched a few parts there, now the screen is always on when i start the netbook.
    my other problem now though is that half of the keys don't work - no output on screen.
    so that's another issue!

  • My screen blacks out and computer starts up again due to an error. Anyone any suggestions what could case this?

    My screen blacks out and computer starts up again due to an error. Anyone any suggestions what could case this?

    Hello nattygrimm,
    I was looking into the issue you are describing and found a great resource to try and fix the issue without having to re install the OS. It is an article called Mac OS X: How to troubleshoot a software issue found here: http://support.apple.com/kb/HT1199.
    I recommend starting here:
    The first and easiest test to try is to see if the issue affects a different user account on your Mac. Each user account has customized preferences and other items stored in its home directory. You'll first need to create an additional user if one does not already exist (follow steps a-h below). Then, log out of the current user and test the issue in the new user account.
    If this resolves the issue, there may be an issue with a file in the home directory of the original user account.
    From the Apple menu, choose System Preferences.
    From the View menu, choose Accounts (or choose Users if using Mac OS X v10.2 or earlier).
    Click "+" (or click New User if using Mac OS X v10.2 or earlier).
    Give the new user a name and short name.
    Mac OS X v10.3 or earlier only: Click the Password tab, and give the user a password.
    Mac OS X v10.3 or earlier only: Click Security.
    Select the checkbox for "Allow user to administer this computer". This makes the user account an administrator.
    Click OK, or quit System Preferences.
    Work your way down the article as needed.
    All the best,
    Sterling

  • HT201210 why it IPAD still black out and fail to switch on again after restore?

    Help!! can I get a replacement since I bought this only end April!!! why is IPAD still black out and fail to switch on again after restore? I restore 3 times and still same black out happens,... this is so frustrating!!

    tried that but it is now at Error1611, so will need to have them look into the hardware !!! thanks for advice !

  • Yet again YouTube videos blacked out in Safari but not in Firefox

    Hello,
    Is anyone else suddenly experiencing the same problem, which is that videos suddenly won't run in YouTube on Safari.   The video frame is just blacked out.
    Copy and past the URL into Firefox and it runs without any problems.  I understand this is a recurring thing with YouTube on Safari, but is there a quick solution or do we just have to wait for YouTube (or Apple) to sort it out?
    Thanks...BC

    One of the following steps should help.
    1. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Restart
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:
        Click in the box for "Enable Plug-ins".
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box for
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes next to all items.
        Check the box next to "Remove all website data".
        Click "Reset".
    5. Turn off Extensions/Plug-ins if any that may interfere with Flash working properly.
        Safari > Preferences > Extensions
    Best.

  • Slide navigator in keynote blacked out and locked - how do I access it again?

    Opened a presentation in keynote and have obviously tapped something as have locked the slide navigator bar on the left side somehow! It's currently blacked out and I can't access the slides or move it to access the key buttons underneath it so am stuck on the presentation I have open. Help!?

    If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

Maybe you are looking for