★URGENT★ BLACKBERRY TORCH KEYBOARD TRACKPAD AND ALL OTHER BUTTONS NOT WORKING 9810

MY BLACKBERRY TORCH 9810 KEYBOARD AND CALL,ETC BUTTONS STOPPED WORKING.
My blackberry got ink at the top of the phone so I got a lightly wet tissue and cleaned the top part of the phone after I finished cleaning it, I recognised the keyboard stopped working. The touch screen still works but the physical keyboard and all other buttons have stopped working. Please help me, I really ened that phone for emergency uses, etc. I do not want to restore my phone so do not suggest that solution.
UPDATE: Right now I have my phone inside a bowl of uncooked rice. 
UPDATE 2: 30 minutes later, I took the phone and rebooted it the keyboard still does NOT work but the trackpad can move up and down but when pressing it does nothing.
PLEASE HELP NEED URGENT HELP.

Hi and Welcome to the Community!
30 minutes is not enough...follow EXACTLY the instructions in this FAQ:
http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
Also, prepare yourself for the worst...the only thing that is predictable about moisture intrusion into a BB is that the results will be unpredictable. Since you have already re-applied power to the BB too soon, it is much more likely that you have totally fried something inside.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • XMLP 5.6.2 - Parameters -  Both Multi-Select and All-Select  Do Not Work

    Both Multi-Select and All-Select Do Not Work.
    What's up with this behavior?
    And when might it be fixed?
    BG...

    The Multi-Select is now working, not sure what I did wrong earlier. However the "Can select all" option when building the parameter does not work as advertised, though I was able to get around that as well.
    Create a Data Model
    select LAST_NAME, FIRST_NAME from SOME_TABLE where SOME_COLUMN =:SOME_VALUE
    OR
    select LAST_NAME, FIRST_NAME from SOME_TABLE where SOME_COLUMN in (:SOME_VALUE)
    Create a LOV
    Name = LOV_SOME_COLUMN
    Type = SQL Query
    select distinct SOME_TABLE.SOME_COLUMN as SOME_COLUMN from SCHEMA.TABLE
    Create a Parameter
    Identifier = PARM_SOME_COLUMN
    Data Type = String
    Default Value = NULL
    Parameter Type = Menu
    Display Label = LOV_SOME_COLUMN
    List Of Value = LOV_SOME_COLUMN
    Option
    Multiple Selection - Checked
    Can select all - Checked
    Refresh other parameters on change - Checked
    Then test your report. Select "All" from the LOV and click view. Result - No Rows Returned.
    Selecting a "Single" or "Multiple Values" values from the LOV does work.
    The way I am getting around the problem is to uncheck the "Can select all" and then manually select all the values in the LOV in order to get the "All".
    BG...

  • I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

    I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
    Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
    Could any one help me out of this?
    Thanks,
    Rajesh

    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
    Make sure all your data is available on your computer for manual syncing later.
    Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
    And you are using iTunes 10.7?
    I'm just trying to help get you going.

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • In my Itunes page the add play list and all other buttons are missing

    In my Itunes the add play list button and all others at the buttom of the page are not visiable hos anyone else run into this problem?

    Hi kirsty1211,
    If you are having issues downloading your purchases to your laptop, you may find the following articles helpful:
    Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/ts4054
    Regards,
    - Brenden

  • Keyboard delete and caps lock keys not working after update

    Shortly after a windows update two keys, delete and caps lock do not work. I have tried the following
    1. system restore..it says it cannot restore as a file is missing. I have used this function before without any problem.
    2. Update key board driver (standard PS/2)..it says latest version is installed.
    3. Uninstall and reinstall.
    4. Reset using the remove batteryt hold down power key option.
    The caps lock and delete does not work in Notepad or MS Word.
    It seems unlikely that the two keys themselves are damaged as it is unlikely that they would both fail at the same time and the problem after the windows undate is suspicious.
    I am using Windows 7 Home premium on a 64 bit HP G62.
    help appreciated as ever
    thanks
    matyiii

    matyiii wrote:
    Thanks I am beginning to suspect the same thing. I will try keyboard replacement as a last resort.....no fun to buy a new key board and have the problem persist...
    regards
    Matyiii
    Here's another test...since your laptop has USB ports get or borrow a USB keyboard and try it and if all those keys work and test then the results would mean your laptop keyboard has stop functioning as least you narrow done the problem.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • T30 freezing issues and Touchpad & Trackpoint buttons not working.

    Firstly I'll explain the freezing issue (this is now the 3rd time I've typed this, as the first two times my laptop froze before I finished!)
    I run my laptop with the battery at 100% and plugged in and that's fine; as is running it on battery. The problem arises when my battery is low and I plug it into recharge. Soon after it's running on a/c the screen will go black and only way to shut down is by holding the power button. If I try to restart it too soon, the indicator lights next to the power button will illuminate, but the screen will stay black. Usually after 5-10 minutes it'll boot to the IBM screen & boot the rest of the way, but not too long into normal operation it'll go black again (sometimes hitting ctrl/alt/del will bring the screen back but it would be very distorted (pixilized) and would go black again and reboot. What could be causing these problems while recharging the battery? I've tried this with a couple different batteries (both OEM IBM) and it does it with both.
     Secondly, both left and right "mouse" buttons are now nonfunctional (though the middle button of the track points works.) I have the latest version of Ultranav Wizard and all the buttons are enabled. The touch pad and trackpoint ball work fine, just the 2 left and 2 right buttons do not. What could be the culprit for this issue? Luckily I have a usb mouse so that's what I'm using for the time being.
    Message Edited by GoalieFergy53 on 02-14-2009 02:30 PM

    My T42p Touchpad and Trackpoint work fine however,
    the buttons are not responding properly.
    I'm forced to use an optical mouse to properly maneuver when working on
    the screen.
    When the well is dry, we'll all know the value of water.

  • Download All updates button not working now?

    Just today, on multiple machines the Download All Updates button stopped working for App updates. I had to click each App Individually.
    I'm using iTunes 10..3.1

    I am also having this problem.  The automatic downloads is for new purchases only.  AG and I are trying to update existing APPs in iTunes and that is where there is an issue.  I too have to download each update individually and some APP updates won't update at all.
    Any helpful suggestions out there?
    I'm using iTunes 10.3.1 also.

  • Spilt water on T420 - Trackpad and Trackpoint L-Click not working

    Hi there,
    So the other night I (quite stupidly) spilt water on my trackpad. I put it straight in the airing cupboard to dry it out for 2 days, and everything works fine except for my trackpad and the left-click button of my trackpoint.
    Is there anything I can do about this? Is it possible to repair the trackpoint? (I don't use the trackpad)
    Will sending it back to Lenovo (UK) do anything?

    Remove your keyboard and palmrest and clean up everything you can find with Isopropyl alcohol paying close attention to connectors. It doesn't take much to cause an issue with the keyboard connector.
    If the keyboard is gunked up you can always buy another keyboard on eBay.
    Good luck

  • I have a canon rebel T5i and all my functions not work, like black and white etc.

    Haven't used the camera for about 5 weeks and now I'm on vacation and my functions don't work. First I thought it was just the black and white function but I have tried them all. I can take the picture but it doesn't save it. I saves all other pictures I take without using one of the functions. Please help

    This is purely a guess (I have  a different camera model and I don't use those functions... for I simply convert color images to black and white in post processing.)...
    If the camera has been sitting for a while, the battery might be down. It may take several discharge/recharge cycles to bring it up to full power and performance. I have seen some odd behavior from my cameras at times when they sat for a long time, that seemed to be related to low battery charge (or to a loosened battery grip, which I use on all my cameras). A fresh battery and/or removing, cleaning the battery to camera and/or battery grip to camera contacts resolved the weird glitches. To clean the contacts, I recommend simply wiping them with a clean, lint free rag lightly dampened with isopropyl (rubbing) alcohol. Pre-moistened computer monitor/keyboard wipes seem to work pretty well, too.
    Alan Myers
    San Jose, Calif., USA
    "Walk softly and carry a big lens."
    GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
    FLICKR & PRINTROOM 

  • Keyboard: audio and Brightness control keys not working with or without fn

    The Keys for controling Audio and Brightness (F1-F5) do not work.
    Also combined with pressing the "fn" key the keys do not work.
    So i only control audio with the remote control or the slider in the menubar.
    Making a reboot with deleting pram didn't help.
    I'm running the up to date version of leopard on a macbook pro (core2duo).
    I also searched in the forum for this problem.
    I oten read about "sytem control"-"keyboard and mouse"-"keyboard" and the F1, F2, etc. to use as...
    but switching this button on or off doesn't change anything.

    problem solved:
    the couse was the software update 1.1 for macbook pro, because there i had the problem like in this thread: http://discussions.apple.com/thread.jspa?messageID=6142512&#6142512
    and did the solution like that, but there i maybe made some mistakes with renaming and copying, so i rinstalled the update and renamed it a copied to plugins, and now all works as it should.
    thanks for help

  • Audio and some other devices not working on compaq mini NOTEBOOK

     A certain PCI device failed to install on my system. my pc cannot detect it and i think this has affected the audio and some other vital devices like battery meter, and ajusting the brigtness of the screen. i want to know if the device can be uninstalled and have some other drivers that will make the pc to work normally. The system also refuses to go on hibernation
    Recent changes: i installed a PDF fill writer software which i have uninstalled
    Name of product: Compaq mini  notebook with serial number CNC0472C51
    PRODUCT NUMBER: XE979EA
    OPERATING SYSTEM- WINDOWS 7 32 -BIT

    Thanks to edgmiw for the solution:
    edgmiw wrote:
    Run system update and make sure all your Thinkvantage utilities and drivers are installed properly.

  • Program and Source Monitor buttons not working?

    I need to take a screen capture of my project, but NONE of the Program monitor buttons are working. I click them and it doesn't do anything.
    I'm posting this because none of the suggestions in the other discussions helped me at all.
    Screen Capture worked perfectly when I used it YESTERDAY. Aside from closing the program, I can't find any other changes that have been made to either my computer or PP_CC.
    I have already tried:
    -Reloading PP_CC
    -Restarting my computer
    -Resetting my preferences (Held SHIFT while opening the program)
    -Changing projects and timelines
    -Adding and removing buttons to see if that did anything
    I'm at a complete loss....
    Is there a way to take a screenshot in the meantime while I figure out what's going on with this issue?
    Working on Windows 7 64bit system

    Hi,
    This might help :
    Go to Documents > Adobe > Premiere Pro and rename the 8.0 folder to 'old8.0' and then launch Premiere.
    8.0 is Premiere CC 2014
    7.0 is Premiere CC
    Rename the respective folder.
    Note: By doing this you will lose your customised keyboard shortcuts and custom workspaces.
    Report back if it helps.
    Thanks,
    Rameez

  • Mute button, low volume button and high volume button not working after upgrade to Win7 Pro

    Hi all, Im using X301. Previously it was shipped with the Vista Business. I was entitled for free upgrade to Win7 since the thinkpad was bought after 25th of June 09. The problem started after I successfully upgraded my Vista to Win7 Pro. My Mute/Unmute button was consistently in amber colour (signal for disabled). the volume button also is not working anymore. On the system side, everything was fine. the drivers is working properly.. the windows also is showing the volume is in a good shape. Unfortunately the button on the thinkpad is always on the disabled mode. Ive been searching for a related drivers that i could download and solve the issue. but till now all the softwares and drivers downloaded from lenovo could not solve my problem. any suggestion or comment is highly appreciated. thanks a million

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

Maybe you are looking for

  • Cancelled invoices still appearing in AP Trial Balance report

    Hi, The invoice was cancelled during 2007 but it is still showing in the AP Trial balance and GL Trial Balance report. May I know why? The current fix is to go the JE and fix it to zero, but this involves lot of manual work. Please guide me to find t

  • Can connect PC to Mac, but not Mac to PC

    Im trying to network my iMac G5 and my PC(Windows XP) over aa wireless network but I'm having problems. I enabled Windows File Sharing I enabled folders to be shared on both Mac and PC I changed the Workgroups to have idenitical names on both compute

  • FI,  SD reports

    Hi, Could any one list out the typical reports (3 for each) generated in the following areas.  Also list the SAP Delivered Report with the technical names: 1. Logistics Purchase Order 2. Material Management 3. Production Planning 4. Finance-Accounts

  • PPOME Dependency Position

    Hello Gurus, Someone knows how to get the dependency positions using a FM or perhaps reading a table, for example according to the image FACTURACION Y IMPUESTOS belongs to CONTABILIDAD Y FINANZAS. Thanks.

  • Transferring emails from mac mail into contacts

    I am assembling an email list for a survey.  How do I extract emails from my Mac Mail into Contacts or a .csv file?