Urgent: Business Partner assignment to Org Unit

Hi,
I have created a Organisational Unit and assigned positions to each unit.
However when I try to assign any busniess partner its giving error as below
<b>The required data changes consist of two parts:
1. Scheduling existing relationships
2. Creating a new relatonship
The existing releationship(s) was/were successfully scheduled, but the system could not create the new relationship.</b>
Is there any specific config required for the Org assignments, if so pls tell me.
Help me its very urgent.
Thanks in advance.
Regards,
Sheetal Hirde

HI,
And also check the following and maintain accordingly
BUPA SYNC ON BP: Integration (ON / OFF / CREATE)
HRALX HRAC X Activate HR Integration
HRALX OBPON ON Integration O-BP Activated
HRALX OBWIG X Ignore Business Partner Warnings
HRALX ONUMB 1 Business Partner Number Assignment (Org. Unit)
run the report Create Business Partner Initially(Tcode;CRM_OM_BP_INTEGRATE).
Regards,
Satish Mathala

Similar Messages

There is no valid business partner assigned to your user

Hello,
I have trouble managing change requests and would greatly appreciate some help.
I am able to create an urgent correction to later authorize it and set the automatically created request to "In Development" status, but after this I get the following message and can not continue to the Created status.
Type: Stop sign
Reference object: Header Data
Message text: There is no valid business partner assigned to your user
I would also like to know where (transaction) and how to eliminate change requests.
My user was assigned to me with the following roles:
SAP_CM_REQUESTER
SAP_CM_CHANGE_MANAGER
SAP_CM_DEVELOPER_COMP
SAP_CM_TESTER_COMP
SAP_CM_OPERATOR_COMP
SAP_CM_ADMINISTRATOR_COMP
Do I need any additional roles? Must I assign a BP to my user? If so, where (transaction) and how (will I need aditional priveleges)?
Regards,
Henry

Thank you Arun,
Yes, I am referring to SOLMAN. Where must I do this, what transaction? I tried BP transaction but it only permits me to establish relations between BP's and not with users. I am sorry, but I am fairly new to SOLMAN and need a little more direction. Maybe if you have a good SOLMAN guide for beginners, I would deeply appreciate you sharing it with me.
email:[email protected]
Thank you again Arun.
regards,
Henry

'Business Partner Assigned to the User' Access Sequence don't work

Hello.
I use access sequence 0008 (Business Partner Assigned to the User) in my Partner determination procedure. But it doesn't work. Corresponding Partner field in service document is empty. But I need that BP linked with logon user filled it.
I've made the same settings on another incstanse of SM and it's work. And what the difference between I don't understand.
Edited by: Dmitry Udot on Feb 13, 2011 2:31 AM

Sorry, but I don't quite get it. My purpose is to have 9 policies all working all the time (they did at in one version of firmware). I don't care about time entries for these. All 9 policies are full of keywords and websites to block webpages related to porn to one degree or another. The 10th policy is time-based to prevent internet access altogether for one or two computers through the wee hours of the morning. This, all in leu of having no parental controls.
Again, it would help if there was more detailed documentation on how this all works. This is the first I am aware that time settings in one policy could affect or impede the operation of other policies. How am I supposed to know this?
In any case, I appreciate your assistance and looking into this for me. But can you now tell me how to make it work so the policies will work as I want - the first 9 around the clock all the time, and the 10th one only from 1:30 am to 8:00 am (every day). Please instruct me on how I am supposed to configure this to work, and what specific settings I am supposed to enter... if it is even possible. Or is there another way of accomplishing this on my WRT54G (Rev. 2) product? Thanks.
Perry

Assignment of org units from feeder system to Legal units

Hi All,
in GTS system , IMG, assignment of legal units having two options are available.
1,Assign plant at feeder system level/ feeder system group level
2, Assign combination of plant and storage location at feeder system level/ feeder system group level
as assigning the org units we need to assign the option 1 and option 2 or do we need to assign the any one from the above two options.
can you please give some inputs which is the best assignment.
Thanks,
Sriman

Hi Sriman,
In SAP GTS, a Feeder system plant or a plant and Storage location combination can either be assigned to a GTS Legal Unit.
In this case, you can either assign a single plant ( or Plants) to a Legal Unit to complete the Organisational Mapping or you can also assign a combination of plant and Storage location ( of a group of plant and respective storage locations) to a GTS Legal Unit if storage location is of further significance while interacting with the SAP GTS System,
I hope you got it now.
Regards,
Aman

User Assigned to Org.unit

Hi all...
I have list of user ..i want to find these users assigned to org.unit ?
i need the list in production.. so i can't write the code...
how can i find? any view or direct table which will list these stuff..
thanks...

Hello,
Use HRP1001 table:
SELECT objid FROM hrp1001 WHERE sobid = 'user ID' AND plvar = 'active PLVAR'
SELECT sobid FROM hrp1001 WHERE objid = objid
SELECT sobid FROM hrp1001 WHERE otype = 'S' AND objid = sobid AND sclas = 'O'.
Regards.
Laurent.

Business Partner number not assigned to ORG unit

hello colleagues,
I cretaed an Org Unit at the highest level, i have assigned Basic data, address data and i have assigned function and attribute, but when i save the Org unit,I am not getting the BP number,
can anyone tell me what could be reaosn for this, but normally whenever a new org unit is created
a BP has to be assigned to it right
please help me with this problem
regards
chandu

Hi Chandu,
To create a bp number & relationship for org unit follow the below process
==> SPRO
==> Customer Relationship Management
==> Master data
==> Business Partner
==> Integration Business Partner-Organization Management
==> Create Business Partner Initially
Click on Organisational Unit(s) and provide the input as 'ID' of the ORG and Execute
Click on the line and right click and select 'Start Repair'
If Bp is already existing, u wnat to build only relation ship follow the below process.
==> Use Tcode SE37
==> Use functional module as 'HR_OBJECTBUPA_INSERT' and Execute
==> Click on the value button and enter OT as 'O', OBJID as ID of the org BUPAGUID as
Businesspartner GUID and Execute
Regards,
PePe

Business Partner Number in Organizational Unit

Hi All,
I am Configuring Organizationla model in CRM 4.0, as we know the system automatically generates a BP of role type of Organizational Unit as soon as we save the Organizational Unit which we created.
But in my case Partner ID is generating but not Business Partner can you please advice me in this regard?
I have checked all the number ranges and all.everything is ok but i dont understand what is missing and where? This is Urgent plz.
It would be great help if you can spare some time in this regard.
Hopefully waiting for your reply at the earliest.
Thanks and warm regards,
Vali.

It should create a BP of type Org as soon as you add a organization in the Org model.
Go to Tx ppoma_crm (Maintain Org Model).
Create a Org and add other data like address and save it .
Exit the screen and open the org model again you would see the BP Number under the Business Partner column for the selected Org.You couls also see Code,ID,Valid from,Valid to columns for the organization.
Take the BP Number and open it through BP transaction.
Thanks,
Thirumala.

Employee resposnsibles Org unit Determination (Employee is assigned to Org Unit)

Hi ,
We want to determine Org unit based on employee responsible but not on basis of USER.
Employee responsible will be assigned to a particular position in Organization .
We want to determine Organization unit where Employee is assigned .
When in transaction Partner Function employee responsible is selected then Organization unit to which employee is assigned should get determined.
When employee resposnsible is changed Org unit (Service ) should change .
Please suggest solution.
Thanks & Regards,
Anup Reche

Hi
first u need to do the filter settings in object BUPA_MAIN to stop the employee replication to R3.
When u create the no. ranges in r3 u can remove the filter so that the process will continue.
Regards
Manohar

Inheritance of a role assigned to Org Unit

Dear Experts,
Im facing the following issue: via TA PFCG i assign roles to orgunits which works fine. But once i create a new orgunit with a position and a person underneath the existing orgunit, i doesnt inherit the assigned role of the orgunit above. The same problem occurs while assigning a new person to an existing position (for example 3 instead of 2 consultants).
I have updated the assignment evry time i changed something, and all the prerequisites are fullfilled.
Is there a way to solve this problem? Do i have do change the evaluation path?
I would be very grateful if someone postet.
Thanks alot in advance.
Christian

Hi,
Please run report RHPROFL0 after you made new assignments in OM. There you need to select right evaluation path to assign roles from positions and org.units.
Cheers

Business Partner ID in Org structure Not generated

Hi,
when i am creating a New Department(Org.unit) in My Org Structure ,system is not generating a Bussiness partner ID number.
If system is not generating the number will there be any problem if i move ahead.
do let me know why system is not generating the Number
regards
subhash

Hi Subhash,
As you said BP will be generated successfully for the dept if you fill the all address correctly .otherwise not. so request you fill all address data include mail also and save and see bp would have cretaed. mail if you dont get BP.
regards
Muthu

How to assign & changed org. unit to employee Id

Hi
We want to move some employees from one organizational unit to newly created one in transaction code PPOM_OLD.
In PPOM_OLD i created new Org. unit ,assign position then assigned existing employee pernr.
But when i see in PA30 the organizational unit remains same.
Even when i observed in PA0001 table i can see two entries for one employee number the old entry is with organizational unit where as new one doesn't have organizational unit at all
Please guide me how can i do changes.
Best Regards

Dear Raza,
Go to pa30- given the Perner-select infotype action 0000-period- all-click on overview
Now you can view all records related to infotype action-select the new created records-choose icon delete.
Now create the new organization unit, Position & their relationships through t-code pp01.
now transfer of employee from old position to new position through action tcode –pa40- select appropriate personal action (promotion, reorganization, transfer etc.)
Put the perner and effective date –execute –in next steps change details as per requirement i.e. in second part- organ. Assignment –
New position details –xxxxxxxx /Personnel area-xx/Employee group-x/Employee sub group-xx
Save.
System goes to next info type 0001-
In the same way give the require details & save.

Business Partner Number for Org Model

Hi Experts
When we are maintain a Sales org Business Partner Number will automatically generated how it will generating let me what are the customizations for that
I have one scenario
Ex: I am taking number range from 10000 to 99999
We created 99999 customers now we want to maintain anther 10000 customers so how should is increase the number range in system 10000 to 99999 only available so how should I will maintain
Please tell me
I will be very happy to reward points.
Thanks and Regards
Kumar
Edited by: Kumar on Sep 24, 2008 12:48 PM

Hi,
The integration settings are maintained in the below path
Img -> Customer Relationship Management -> Master Data -> Business Partner -> Integration Business Partner-Organization Management -> Set Up Integration with Organizational Management
hopes this answers your query.
Regards
Vinod

Business Partner missing in Org Structure

Hi all
in Org structure if the purchasing group org unit has BP number missing how can we assign it ?

Hi Worana,
BP is automaticaly created for purchase group when you create PG right? Can you explain what exactly your requirement? check all necessary address data for purchase group like postal code email country ,region.
Regards
Muthu

Positions assigned to Org Units

Dear Consultants,
There are some designations / Positions (like Clerk / Assistant etc) common in more than one departments. How can we assign it in System?? When we assign any designation to the second department, the first assignment is delimited automatically.
can we specify that a person is working in a specific org unit? I think it is determined upon the Position.
Regards
Bindumadhav
9869028264

Hi Bindumadhav,
Expecting that you are still looking out for replies, let me clarify one thing.
The Positions that you have mentioned here (like Clerk / Assistant etc) are not Positions, but Jobs. Jobs generally tell you what kind of activity is involved, whereas positions are specific individual employee assignments. You can create a Job and use that to Describe various positions. But each of these positions can Belong to one Org Unit (Department) only.
Kindly revert back if you require further clarification.
Thanks and Regards,
Leena

No valid business partner assigned to my user?

I have this error when trying to activate my task list or trying to create any change requests. Can anyone explain where this can be configured?
Thank you!
Margo

Tx: BP
- Create Business Partner (Person / General)
- Assign New Role (Employee)
- Employee, Identification tab: add your user name
Hope this helps.

Urgent: Business Partner assignment to Org Unit

Similar Messages

Maybe you are looking for