Urgent Can any one help me to upgrade system 9.2 to 9.3.1

Hi There
We are planning to upgarde Hyperion financial management from 9.2 to
9.3.1.
How can i do this please mention any steps that you know.
We need to uninstall 9.2 and install 9.3 or just applying patch.
If you have any white papers or document please send it to me
[email protected] that could be great.
Thanks
Steve.

Steve,
My suggestion would be to consult the HFM installation guide available here on Oracle's website. There is a section entitled "Upgrading to Financial Management 9.3.1" which should contain all of the information you need.
Best Regards,
Bobby Ellis, Jr.

Similar Messages

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6.

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

TS1538 i cant connect my iphone to laptop. its nither charging nor connecting :( usb cable is okay .... can any one help ??

i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

I have a early 2008 macbook 13 inch and dont have the pass word can any one help?

I have an early 08 macbook that is locked by password and do not know Itunes account. can any one help thanks.

Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Part cost   kf values are getting aggregated ......... can any one help me?

hello gurus....
iam designing a infocube in which there is a keyfigure 'partcost'.when i execute a query on this infocube, the part cost values for a particular part id are getting summed up. but the part cost ,whether for single or 100's of parts ,should be the same.
   i dont want these part cost values in the query to be aggregated. what i should do now. declare this part cost as non cumulative kf or is there any solution for this ?
i have gone thru the sap help site, but unable to find a solution for this?
   how to declare it as a non cumulative kf ?
can any one suggest me a with some detailed steps what should be done for this? very urgent . my project deadline is with in 2 days. i will be really thankful to u..

Hi Lokesh,
      Pls check your post in BI General. part cost kf values are getting aggregated ......... can any one help me?
Regards
Hari
Message was edited by: Hari Krishnan K

HI, I downloaded and used illustrator last night, but today it crashes on opening? can any one help?

I downloaded and used illustrator last night, but today it crashes on opening? can any one help?
The only reason I download from Creative Cloudd is because my previous software copy is no longer supported, feeling very frustrated!

Tabitha,
Many still use unsupported ealier versions, and there is no real need to upgrade unless there is a real need.
Unless you have done something like installing new fonts or made other changes, it may be releavnt to look at the following list.
Or you can try this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Hello can any one help to get IDES CD'S

HI ALL
as i know i am not supposed to post this type of threat in this portal.
as i am away from INDIA . i don't had any way for my solution.
i need /help to get IDES on my note book.
can any one help me how to get those cd's.
infromation can sent to my id
my id : [email protected]
it is urgent
reward points for helping me out
cheers
kishore

go Google!!! Seeing your track record of posts in this forum, please do some research of yourself before asking questions here. And put some time in your questions! Read the FAQ: http://developers.sun.com/resources/forumsFAQ.html.
Better questions (questions that have been researched and that are well phrased and provide sufficient knowledge of the problem and the problem area) get better answers.

Can any one help me in fi/sl extraction

can any one help me in fi/sl extraction.i am not able to get data in cube please send me screen cut of fi/sl extraction.
Edited by: chaitanya pissay on Apr 11, 2008 7:26 AM

Hi Chaitanya,
Check here........
FI-SL Extraction
FI /SL extraction
http://help.sap.com/saphelp_nw70/helpdata/EN/04/e04c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FISL/FISL.pdf
Fi_SL data model
http://help.sap.com/saphelp_bw32/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Regards,
Vijay.

Can any one help me in this code

Hi all,
I have created a selection screen and my aim is to display some fields or some block dynamically by choosing some radio button is it possible.
can any one help me in this.
REPORT z_g_test.
TABLES: spfli,sbook,sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF BLOCK 1.
PARAMETERS:rad1 RADIOBUTTON GROUP g1 USER-COMMAND us1,
           rad2 RADIOBUTTON GROUP g1 DEFAULT 'X' .
SELECTION-SCREEN BEGIN OF SCREEN 001 as subscreen ."WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_fldate FOR sbook-fldate.
SELECTION-SCREEN END OF SCREEN 001.
DATA ok_code LIKE sy-ucomm.
INITIALIZATION.
START-OF-SELECTION.
SELECT * FROM spfli WHERE carrid IN s_carrid.
ENDSELECT.
END-OF-SELECTION.
WRITE:spfli-carrid.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'US1'.
*      call screen 001 starting at 55 40.
ENDCASE.
Is i am going on the right way
Regards,
Lisa.
Message was edited by: Lisa Roy
Message was edited by: Lisa Roy
Message was edited by: Lisa Roy

This is what I meant. Copy this and try as it is and see if it serves your purpose.
REPORT ztest1 .
TABLES: spfli, sscrfields, sbook.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 4 LINES.
SELECTION-SCREEN TAB (25) tabs1 USER-COMMAND ucomm1
                     DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (25) tabs2 USER-COMMAND ucomm2
                     DEFAULT SCREEN 002.
SELECTION-SCREEN END OF BLOCK tabb1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE abc.
PARAMETERS: p_date LIKE sy-datum.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN .
SELECT-OPTIONS: s_fldate FOR sbook-fldate.
SELECTION-SCREEN END OF SCREEN 001.
SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN .
SELECT-OPTIONS:s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF SCREEN 002.
INITIALIZATION.
tabs1 = 'Search by flight date'.
tabs2 = 'Search by flight number'.
abc   = 'Some other parameters'.
AT SELECTION-SCREEN OUTPUT.
CASE sscrfields-ucomm.
    WHEN 'UCOMM1'.
      tabb1-prog = sy-repid.
      tabb1-dynnr   = 001.
      tabb1-activetab = 'TABS1'.
    WHEN 'UCOMM2'.
      tabb1-prog = sy-repid.
      tabb1-dynnr   = 002.
      tabb1-activetab = 'TABS2'.
ENDCASE.

Can any one help me to code a browser

hi ,
I am Anil, I am doing an application in java. it needs a browser as IE or Morzilla . i tried to implement the browser using jdic.
i add jdic.jar files as a external jar file and added it to my project. when i run the program in eclipse it works fine. when i want to create a jar file to my application it shows the follwing error..
when i click on that jar file , it shows a Java Virtual Machine Launcher dialog box and in that dialog box it shows error Could not Find the main class. Program will exit ..
this is the error.
can any one help me to over come the error or any alternative method to implement a browser..

DarrylBurke wrote:
Corss poster!
[http://www.java-forums.org/advanced-java/30298-how-write-job-aggregator-java-j2ee.html]
dbNot anymore, Fubarable has axed that thread.

Hello, every one. Over the last few days I haven't been able to download any app from the app store. can any one help me, please?

Over the last few days I haven't been able to download any app. can any one help me, please ? thank you.

Andrea...
You posted in the "Using Mac App Store" forum but your profile indicates you are using an iPad so that's what I'll try helping you with.
On the iPad tap Settings > General > Reset > Reset Network Settings
Then restart the iPad. Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you still can't download apps, the problem may be your Wi-Fi connection > iOS: Troubleshooting Wi-Fi networks and connections

HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?
Thanks!

Dear Linc,
Thank you for the advice, John Blanchard1 and Linc Davis
As suggested in your reference thread I removed "/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin" and the problem has been resolved.
I am guessing the the plug-in for the hp printers got corrupted and effected every thing, or became unsuitable when I installed an Apple update. I would be most grateful if you can confirm how the problem was coursed so I can understand and learn from this experiance.
Ash

Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

You might find useful information in item D1 of Time Machine Troubleshooting.

Urgent Can any one help me to upgrade system 9.2 to 9.3.1

Similar Messages

Maybe you are looking for