Urgent: Cannot see shared volumes while installing Clusterware

I have made 4 extended logical drives from EMC shared storage to be visible from my two nodes on 64bit windows 2003 server. During Clusterware installation while selecting the disks for OCR and Voting file, I cannot see the raw shared volumes.
The following is the output of cluvfy utility for component shared storage accessibility,
# runcluvfy.exe comp ssa -n node1,node2
Verifying shared storage accessibility
Checking shared storage accessibility...
Shared storage check failed on nodes "node2,node1".
Verification of shared storage accessibility was unsuccessful on all the nodes.
I also get exectask.exe encounter a problem and needed to close meassage aswell.
[email protected]

The issue is resolved. I formatted the shared disks with NTFS file system. Then deleted the partition and recreated extended logical volumes and now the shared storage is accessible from the clusterware instalation for the selection of ocr and voting files.
Thanks anyways.
[email protected]

Similar Messages

Cannot see disc drive after installing boot camp windows 8

cannot see disc drive after installing windows 8

the superdrive, it works fine in osx not in windows 8 on boot camp

User cannot see tax amount while creating PO

Hi All
My user cannot see tax amount while creating PO but on displaying the PO after saving he can see the tax amount in the PO.
Is there any authorisation issue or what is the proble

Please check the autorixation. Take the screen shot of /nsu53 and contact with BASIS person
regards

Cannot see Shared Folders from xmlpserver - OBIEE 11g (11.1.1.5)

Hi All,
I have got a an issue with the permissions i.e. I can log in to http://hostname:7001/analytics and open a report that is stored in "Shared Folders" but if I log in to http//hostname:7001/xmlpserver with same user I cannot see Shared Folders.
How to fix this issue? Thanks in advance.

Thanks for your quick response Kishore.
The user is the Admin user. This user is part of XMLP_ADMIN group as well.
I can create a file from http://hostname:7001/xmlpserver in the shared folders but cannot see. I can see the same file from http://hostname:7001/analytics. any idea?

While installing Clusterware cannot see raw shared partitions

I have made 4 extended logical drives from EMC shared storage to be visible from my two nodes on 64bit windows 2003 server. During Clusterware installation while selecting the disks for OCR and Voting file, I cannot see the raw shared volumes.
The following is the output of cluvfy utility for component shared storage accessibility,
# runcluvfy.exe comp ssa -n node1,node2
Verifying shared storage accessibility
Checking shared storage accessibility...
Shared storage check failed on nodes "node2,node1".
Verification of shared storage accessibility was unsuccessful on all the nodes.
I also get exectask.exe encounter a problem and needed to close meassage aswell.
[email protected]

The issue is resolved. I formatted the shared disks with NTFS file system. Then deleted the partition and recreated extended logical volumes and now the shared storage is accessible from the clusterware instalation for the selection of ocr and voting files.
#cluvfy comp ssa -n node1,node2
The above command on 64bit win2003 servers gives error. This is due to bug 6007675. Base Bug number is 4714708. So the solution is to continue with the installation and ignore the error message.
[email protected]
Sami Malik

Skype for Business - Cannot see shared screens, bu...

I just started a new job and am required to use Skype for Business. I downloaded Skype for Business 32 bit. My PC is 64 bit but because I already have other Office 32 bit programs, I cannot install the 64 bit version.
Everything in Skype for Business appears to work properly, except for the fact that I cannot see someone else's screen when they've shared it with me. When someone shares their screen with me, all that I can see is the empty white box where their desktop should be. When I share my screen with others, they can see my desktop correctly.
What other information is needed to help diagnose this issue? I really need this functionality in order to do my job properly.
Thanks in advance for your help.

I was using Lync as part of the offerings found on Office 365 and I was prompted to "upgrade" to Skype for Business and so I did per the suggestion. Lync had screen sharing, Skype for Business currently does not have screen sharing! This is a major dissapointment. Who is the product manager and why the premature roll-out? This is incredebly frustrating as most all my clients leverage Lync (their own install on their servers... have not upgraded yet.. lucky for them) and screen sharing is an important part of my interaction. It took many of my clients a long time to master Lync and therefore, it is incredebly challenging to teach them how to use an alternative tool over the phone. I feel incridebly duped. My clients can share with me however, I cannot share with them. What is the current timeframe for enabling (re-enabling) this functionality? How can I get back Lync? Is there a beta release of the next version? Finally, how can this be called "Skype for Business" when a core aspect of the tool to conduct "business" had been stripped away without warning?

Skype for Business - Cannot see shared screens, but I can share my screen

I just started a new job and am required to use Skype for Business. I downloaded Skype for Business 32 bit. My PC is 64 bit but because I already have other Office 32 bit programs, I cannot install the 64 bit version. Everything in Skype for Business appears to work properly, except for the fact that I cannot see someone else's screen when they've shared it with me. When someone shares their screen with me, all that I can see is the empty white box where their desktop should be. When I share my screen with others, they can see my desktop correctly. What other information is needed to help diagnose this issue? I really need this functionality in order to do my job properly. Thanks in advance for your help.

I was using Lync as part of the offerings found on Office 365 and I was prompted to "upgrade" to Skype for Business and so I did per the suggestion. Lync had screen sharing, Skype for Business currently does not have screen sharing! This is a major dissapointment. Who is the product manager and why the premature roll-out? This is incredebly frustrating as most all my clients leverage Lync (their own install on their servers... have not upgraded yet.. lucky for them) and screen sharing is an important part of my interaction. It took many of my clients a long time to master Lync and therefore, it is incredebly challenging to teach them how to use an alternative tool over the phone. I feel incridebly duped. My clients can share with me however, I cannot share with them. What is the current timeframe for enabling (re-enabling) this functionality? How can I get back Lync? Is there a beta release of the next version? Finally, how can this be called "Skype for Business" when a core aspect of the tool to conduct "business" had been stripped away without warning?

Cannot see Oracle Explorer after installing ODT10104

After installing ODT10104 on Windows XP I cannot see Oracle Explorer in my View menu group. I'm using VS 2005 and I installed ODAC92070 but still cannot see Oracle Explorer. The install of ODT was successful but an exception occured while getting vaues from my register. Here is an excerpt of the generated log
"....Starting install Install Phase 2 of component Oracle Developer Tools for Visual Studio .NET
Calling Query w32RegQueries10.1.0.2.0 RegKeyExists
Key = HKEY_LOCAL_MACHINE
SubKey = SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FA7E3351-448B-4BDA-986F-8CB3DA36CE5D}
Query Returned: true
Setting variable 'b_IsVSIPInteropInstalled' to 'true'. Received the value from a code block.
Calling Query w32RegQueries10.1.0.2.0 RegGetStringValue
Key = HKEY_LOCAL_MACHINE
SubKey = SOFTWARE\Microsoft\.NETFramework
Value = sdkInstallRootv1.1
Query Exception: GetValueKeyNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
C:\Program Files\Microsoft Visual Studio .NET\FrameworkSDK\
Setting variable 's_gacutilPath' to 'C:\Program Files\Microsoft Visual Studio .NET\FrameworkSDK\'. Received the value from a code block......."
What key values is missing in my register which may cause the install of ODT to fail?
Mike

I installed version of ODT 10.2.0.2.20. I now have the menu item 'Oracle Explorer' but when I click on it system returns error Package Load Failure...Package 'Oracle Developer Tools for Visual Studio .NET has failed to load properly ( GUID = {D601BB95-E404-4A8E-9F24-5C1A46246CE} )
I'm using VS 2005, not 2003. Any ideas how to fix?
Mike

Mac OS 10.6/Time Machine cannot 'see' HD to re-install or restore

Upgraded my Mac Mini to Snow Leopard a couple weeks ago and had no problems. Then yesterday the computer froze up (the mouse still moved and icons in the dock expanded with the mouse but NOTHING was acknowledged when clicking to tabbing to any commands; could not even click from screen to screen for various functions that were currently open ... yet the mouse moved fine). Tried to restart computer and all I get now is a gray screen with a flashing file folder with a question mark in it.
Have tried all attempts listed here and in Support to (1) re-install Mac OS X 10.6 from the original disk, and (2) restore my computer from my Time Machine. Have tried many, many times now for both options and in ALL cases the computer cannot see or find my computer. The only disks it can find to re-install or re-store to are the 2 external hard drives I have. If I disconnect these, the computer can find NO disks to re-store to. (I've now let my system search for disks for over 3 hours this time around, and it still cannot find any disks to install to.)
So what's happened to my Mac Mini and "where" has this disk gone to? Why can't my Time Machine or Mac OS X installation disk find (or see) my Mac Mini?
(Really do need a new computer and was seriously thinking about just buying the new iMac this week, so maybe this is the sign. But would still like to get the last few files off my Mac Mini that I was working on when it crashed -- don't think Time Machine actually had time to back these up ...)
Cheers, and thanks for any suggestions and help!

Karl
It sounds like you are having trouble with your internal Hard Drive.
Whilst this is quite serious, sometimes you can fully recover from the situation, depending on what happened.
One of the most useful and reliable rescue utilities is DiskWarrior:
http://www.macupdate.com/info.php/id/11707/diskwarrior
If you are lucky it may be something as simple as a damaged HFS+ wrapper, which can be repaired and have you back up on your feet again in relatively short order.
It pays to periodically check the *S.M.A.R.T. Status* of your drive, at the bottom of *Disk Utility.*
This is a self diagnosis function that may indicate impending problems. However if the disk has sustained physical damage, such as caused by a hard knock, nothing will redeem it.
Peter

Error on installing Shared Technologies while installing PS11

Am getting "error while installing Shared Technologies.." while installing PS 11. I uninstalled the antivirus but got the same error message. Does anybody know how this can be fixed or what I should do now? Thank you so much..

Hi Newbie Me,
Please follow the mentioned kb: http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html .
If still the same issue then rename OOBE from the given location and try installing again:
Win:C/Program Files(X86)/Common FIles/Adobe/OOBE and rename it to OOBE.old
Mac: /Library/Application Support/Adobe/OOBE and rename to OOBE.old.
Regards,
Romit Sinha

Error while installing Clusterware for RAC Oracle 10gR2?

Hi ,
I am installing clusterware 10.2.0.1 on Windows XP Service Pack 3.While installing i got the below errors.
Checking operating system requirements ...
Expected result: One of 5.0,5.2
Actual Result: 5.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows XP Version 5.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
How can i overcome this problem? Can anybody helpme.
Thanks
Rajesh

Which edition of Windows XP are you running? Home edition is not supported for Oracle products.

Cannot see shared libraries

I have a 1st gen iPad (ipad1) running iOS 5.1.1
Ipad1 is connected to iTunes 11.0.1.12 on my windows 32 bit laptop (laptop1) using my Apple ID (ID1)
I have just bought a new iPad retina (ipad2) running iOS 6.0.1 for my partner
Ipad2 is connected to ITunes 11.0.1.12 on my partners' windows 32 bit laptop (laptop2) using his Apple ID (ID2)
We want to share content, including apps, books, films and music so we tried to set up home sharing over our wireless Internet home network
We have authorised ID1 and ID2 on both laptop1 and laptop2
We have set up home sharing using ID2 on both laptop1 and laptop2
Both laptops have the firewalls switched off
But we still cannot see each other's libraries on iTunes on laptop1 and laptop2
We have tried rebooting, shutting down and reopening iTunes, turning home sharing off and on etc. but still cannot get it to work and it is driving us mad. Many posts suggested this was a problem with iTunes 11 so we even tried reverting to iTunes 10.3.1 and still could not see each others libraries.
Could someone please help!

I couldn't see shared iTunes libraries. Apple Support could not help, "...it's a network issue..."
Here's the answer (...at least for me...).
We have 4 Mac's & 1 Windows machine. Network is a DSL modem to a Links router, to an Apple Airport (2 hard wired & 3 wireless computers).
With above clue and the techie mantra RTFM (Read The F..ing Manual) I noted the Airport manual says that when connected to a router the Airport should be configured NOT to issue it's own IP addresses; in this mode it acts as a 'bridge' to the router who issues all IP's. Problem solved.
Everyone can see everyone else.
Hope this helps someone!
larry
==============

Our team cannot see shared and sync'd files in our Creative Cloud account. How can we fix this?

The team members are logged in, have loaded a test file in the Creative Cloud Files directory, uploaded them to the Cloud and made the files public, but we cannot see them in the web browser under "Creative Cloud Files".
The files seem to be there because we can send an email with a link to the files and can see them through the linke, just not in the browser.
What might we be doing wrong?

Folder sharing is not available yet. It is being worked on.
So currently a file is owned by one Adobe ID. That Adobe ID can create a public sharing link to that file. Anyone can access this link whether or not they are signed in with an Adobe ID.

ROOT.SH failed while installing clusterware, Need Help

Hi,
I am creating 2 Node RAC, while installing the clusterware I had to run the two scripts at the end....RootInst....done yet I am stuck with root.sh , However I tried it on Node2, It worked perfect...configured clusterware and alll services are up on Node2..
Here is what I got on Node1.
USM driver install actions failed
/u01/app/11.2.0.3/grid/perl/bin/perl -I/u01/app/11.2.0.3/grid/perl/lib -I/u01/app/11.2.0.3/grid/crs/install /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl execution failed
Can some one please help, If it can work on Node2 Why not on Node1..
Your help will be really appreciating.
My OS is AIX 7.1
And Clusterware Im trying to install is 11R2.
=========================

1- Have you ran the orainstRoot.sh on the two nodes before start running the root.sh?
2- Have you started running the root.sh on the "local node" FIRST (i mean, the node from where you´re installing the GI)?
Edited by: user6418608 on 07/03/2013 11:35

Cannot see video preview while editing

Years ago, I captured and edited a movie I had made, using an earlier version of Premiere. Today, I want to do some re-editing, but even when I render the entire video, I cannot see the video preview, though the audio plays just fine. I'm using Adobe CS3 on a Vista system.
The video is a 3.6 gigabyte .mpg file, and plays perfectly when not in Premiere. When in Premiere, all I get is a blank green screen instead of the preview window. It's hard to google the error, because, of course, "green screen adobe premiere" gives a LOT of tutorials, heh. The computer is a new, dual-core system that exceeds all of the system requirements for Premiere.
I don't know where to begin fixing the problem, which I've bashed my head against for weeks now. Helping me will bring you great karma in this world and the next, I assure you.

Based on reading a LOT of problem reports, importing files from a DVD camcorder or other MPEG device, or Ripping DVD files rarely results in success in Premiere... do not be fooled by movie industry advertising into thinking that "DVD Quality Video" is suitable for EDITING... it is not... a DVD is designed to be for PLAYBACK only... and that includes trying to edit a Standard Def MPEG or VOB file!
You should also use WAV sound files, not the compressed MP3 format, To work with AC3 files in Premiere, it MAY work to copy the ad2ac3dec.dll file from the Encore DVD directory into the Premiere directory
Go to my notes page http://www.pacifier.com/~jtsmith/ADOBE.HTM
Click the internal link for editing compressed files... read, there are some ideas & links there
There are other products better suited to your task (read at the link above for a partial list) but if you only have DVD type files, you should convert to DV AVI... go to the VideoHelp link in my notes and look for a program to convert... but do be aware that converting from a HIGHLY compressed viewing format back to an editing format is going to cause a drop in quality
The only SD (Standard Def) files that Premiere really likes are DV AVI type 2

Urgent: Cannot see shared volumes while installing Clusterware

Similar Messages

Maybe you are looking for