Urgent :Captivate - Authorware Problem

i'm using Captivate-Authorware KO to use captivae flash
movies inside authorware, but when i'm tryoing to get results from
captivate using _cvTracking it didn't show aything, i think that's
beacuse i'm using Captivate 3 and option to send scroe to
Authorware didn't find on it. But i need to use some functionality
of Captivate 3 as Rollover Slidelet to make menues rollover which
is not found in Captivate 2 So anyone knows if there is an option
in Captivate 3 to allow me to take result into Authorware using
Captivate-Authorware KO

Thanks alot,
I did it :)
Just i opened an empty project in Captivate 2 and made the
settings in Quiz Manager for Authorware, then i opened the project
in Captivate 3, this will make the output to be sent to authorware
even this option not found in 3

Similar Messages

Adobe captivate installing problem

Title: Adobe captivate installing problem
Question: I have purchased a Adobe Captivate 4 license and I have downloaded the setup file from adobe site and installed in a x86 windows XP machine which is joined in a windows 2003 server ADS.At first I installed as trial version once installed I provided the key after all a windows will come up with asking the license agreement I click accept but Nothing will happen nothing will run in the system, also I cant uninstall when clicking uninstall nothing is happen .I have tried installing by creating a folder under the program files as adobe2 then I can start the program but after a while or afte many time but this doesn't help .I have the same problem in other machines too. can any one help me?r a day it will again as the license agreement windows and I selected accept then the same problem I have tried reinstalling

How does this relate to GoLive?
Did you intend to post here?...
http://forums.adobe.com/community/adobe_captivate

Captivate 7 Probleme auf dem Mac

Ich versuche seit einiger Zeit den Umgang mit captivate 7 auf meinem Mac. Dabei muss ich immer wieder feststellen, das das Programm offensichtliche voller Bugs steckt. Wie sieht es bei euch im Forum mit ähnlichen Erfahrungen aus?
Ich arbeite auf einem MacBook Pro 2,4 GHz Intel Core i7 mit 16 GB Arbeitsspeicher und Adobe Captivate 7
Problem 1: Aggregatorprojekt funktioniert nicht.
Ich habe ein Aggregatorprojekt erstellt, das auf 3 swf-Dateien zugreift. Wenn das Projekt gestartet wird, spielt die erste swf-Datei ab und hält am Ende an. Durch betätigen eines Buttons (dieser hat die Funktion "weiter") soll das Projekt mit der zweiten swf-Datei weiter machen. Allerdings funktioniert das nicht! Das Programm wird beendet.
Problem 2: Abspielen von Videos auf der Bühne
Ich habe ein Video (Flash Video) auf der Bühne platziert. Wenn ich jetzt den Abspielknopf in der Zeitleiste drücke wird das Video verzehrt angezeigt, man erkennt nichts, dadurch kann ich natürlich auch keine weiteren Objekte vernünftig auf das Video ausrichten :-(
Nur über die Funktion "Vorschau" kann man die Folie mit dem platzierten Video ansehen - das kann doch wohl nicht sein.

Welche Versionen benutzen Sie denn, Heinz-Günther?
Was ist auf dem Mac installiert (iPhoto, MacOS) und was auf dem iPad?
Ist die Signatur (iPad, iOS 5.1.1, iPad3 32GB Wifi & 3,5G) die aktuelle Version? Was war installiert, als alles noch geklappt hat?
Und um welche Art von Verbindung geht es? Photo Stream? iTunes Photo sync? Wir müssen es etwas genauer wissen, um zu sehen, was das Problem sein könnte.

Urgent!! Problems muxing .m2v files and audio!! MPEG Streamclip/Compressor

Hello!
I am under an urgent deadline to upload a short 6 min documentary clip for a client to review for screening this week. The footage was shot in 1080/60i HDV.
Usually, I find the best quality and fastest way to do this is to export directly from my FCP sequence using the '150 min Best Quality' DVD settings in compressor to get an .m2v video file and .ac3 audio file. Then I open the .m2v files in MPEG Streamclip which links it with my .ac3 file, then do 'Export MPEG with MP-2 audio". This gives me a single, muxed file that I can then upload to YouTube or Vimeo.
However, with this project, when I open up my .m2v file in MPEG Streamclip, it's recognizing the .ac3 file and I can see the info for it in the MPEG Streamclip window, but when I play the file in MPEG Streamclip or mux it, I don't hear any audio. Furthermore, after about 5 seconds into the clip, the playhead will continue moving, but the video will freeze, then maybe pick up again later. The .m2v video will play back smoothly in VLC player or Quicktime player, but not in MPEG Streamclip.
I've tried exporting different little sections of the timeline to see if maybe I had some corrupted footage or whatnot. I even exported a small clip from an older HDV project to test. But no matter where I export from, I am running into the same problem. I can bring the .m2v file and .ac3 file into DVD Studio Pro and burn a DVD with no problem, but I can't mux them. If I build the DVD file in DVD SP and try to open the .VOB file with MPEG Streamclip, I get the same problem. I even tried using a different software to mux (ffmpegX) but to no avail. When I try with ffmpegX, it either tells me I'm dropping frames, or if it works and it muxes it, when I open the MPEG file, it'll stutter at about 5 seconds in as well and I can't hear any audio, even though there is supposed to be audio in the muxed file.
I think I might have updated my Quicktime a few days ago with the system update, and maybe updated a few other things, so I don't know if this has any bearing on the problems I'm running into. But I was able just a few days ago to export HDV 1080/60i using this workflow without any problems.
I realize I have other export options, but this always seems to me to be the best quality and fastest way of doing it vs. encoding an H.264 which, on my machine is RIDICULOUSLY slow...I need to be uploading multiple versions of the cut to the client, and really need help! Thanks so much in advance!
J

what you want is an m2v program file. Export a reference copy from FCP (uncheck Make Movie Self Contained") That's very fast. Bring it into Compressor. In the settings panel find the MPEG-2 settings folder. Select Program Stream. Adjust to your liking and run. The audio and video will already be "muxed" when it's done and using compressor 3 you can set it to upload to YouTube, Mobile or similar sites.

Captivate Facing Problem - Opening a PDF

Hi,
I am using Captivate 4.0. I have developed a course which has a link to open a PDF file.
I have created a link and also I am able to open the PDF, but the problem is it is opening in a new browser window. I want the PDF to open in a new tab in the same parent window.
Pl. help me in resolving this issue
Thanks

There is no way to do that from within Captivate so you can only open it as a new window.
If I am not mistaken there is a new property in CSS3 that allows you to open a new tab, but this would require that you have pretty good experience with writing HTML, CSS and JavaScript to make it work. You could then write a JavaScript function that will open your PDF and in Captivate have a button that calls that JavaScript function when the user clicks on it.
It would be a lot of trouble just to get a new tab though and you should also keep in mind that this would fail in all non-CSS3 compliant browsers.
/Michael
www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips & Tricks and much more..

Very Urgent?Facing Problems With Labels

Hi All,
It's Very Urgent,In My VC Application
Label Have More Than 15 Characters
I PUT Label Layout To Long Label.
My Label Name online assignement date
But Even Put Long Label, online ***.......
Please Resolve The Problem ASAP.
Thanks
SubbaRao Chinta

Hi Subbu,
I told u already its an Know issue with Flex compiler ,Even u set the label to long label it will show u only short label.
This issue is fixed with Flex2 compiler.
Use Flex2 compiler for ur application then it will dispaly the total label u want display.
Regards,
Govindu

Urgent Sql Query Problem - -Very Urgent

Hi Guys,
I need a urgent solution for a problem.I am
using the following query
select ename from emp where deptno =10
Now I will declare a bind variable and if user passes 'A'
then the query will run as it is and if he passes B
then it should run the above query with this additional clause -> birthdate - hiredate >15.
Please can any one help its very urgent

Assuming that you have a birthdate column in your emp table, the following will do what you are asking for:
VARIABLE bind_var VARCHAR2(1)
EXECUTE :bind_var := '&bind_variable'
SELECT ename FROM
(SELECT 'A' AS selection, ename FROM emp WHERE deptno = 10
UNION ALL
SELECT 'B' AS selection, ename FROM emp WHERE deptno = 10 AND birthdate - hiredate > 15)
WHERE selection = :bind_var
However, the clause "birthdate - hiredate > 15" will only retrieve rows for employees who were born more than 15 days after they were hired. I doubt that this is what you really want, since this is impossible.

Help urgently needed: bizarre problem - no audio in imported clip!

Hey there!
I have a bizarre - never the less urgent problem:
When I import some material (presentations) which I have recorded on Mini DV with my Canon MVX10i Camcorder the following problem occurs:
There is one particular presentation which somehow looses the audio during the import process!
That means the imported clip has no audio even though the audfio is on tape! Other clips before and after do not have this problem - the audio is available after the import.
A bizarre but serious problem for me. Any suggestions?
Thanks a lot in advance
Thorge

I had a similar problem. When I started the tape from the beginning no audio would import. To solve it I started the tape a few seconds in and It seemed to work.
Hope this helps.

URGENT: JAVA FTP problem

Hi,
I am trying to FTP (retreive) the files from external server, that is going through some proxy.
I am using commons-net-1.0.0.jar file to do the FTP (FTPClient)
2 files must be retreived (get) from that box. The local server is UNIX solaris.
It is working fine in BC box and Dev box. The process is able to GET both the files.
But in Production (Primary box), I am able to get only one file, and that is the smaller out of 2. Not getting the larger file.
Program is not throwing any errors either.
Not sure what I need to check or how to resolve this problem.
Any help is greatly appreciated.

There is little improvement from previous time (above mentioned problem)
Now, first time when I run the program, it is working fine and I am getting the files back from external source.
But if I run the program 2nd time (repeatedly) , it is not FTPing the files and program is hanging @ the retreival (FTP retreiveFile() ) part.
i.e. If I run the program after certain gap like 3-4hrs, first time it is working fine. But starts hanging if I run 2nd time.
Do I need to set something.
Please help. Very urgent.
Thanks in advance.

URGENT - Multi-form problem

Would be great if anyone could help me with this:
Say I have two forms A and B, A has a repeating timer
which, when fires, will GO_FORM to B and B's WHEN-WINDOW-
ACTIVATED should fire and do stuff. Problem is if
the focus is already on form B at the beginning,
form A's timer expires but form B's WHEN-WINDOW-
ACTIVATED trigger doesn't fire as it IS already the
active window of the two at the time of the timer
expiration. So the stuff in B's WHEN-WINDOW-ACTIVATED
won't execute when I want it to.
Any workaround? I need a solution to this urgently.
Thanks big time in advance!!

and what makes me wonder is that looks like the focus
did temporarily switch to form A in the background,
confirmed by a check of the :SYSTEM.CURRENT_FORM and
CURSOR_ITEM etc in the WHEN-TIMER-EXPIRED trigger. But
still, if I GO_FORM back to form B, form B's WHEN-WINDOW-
ACTIVATED just won't fire.
Buggy WHEN-WINDOW-ACTIVATED trigger? Or misused?
Please, anyone? By the way, form B is launched from
a button in form A, just in case if that makes a diff.

URGENT - Flash Timer Problem

Hey there, I;m having trouble to place a timer in my flash. I'm attaching the source file.
The issue is such that I'm having 3 buttons, when triggered (RollOver) reveals an image or swf and when I rollout, it display a default random image, from an image directory. What I want is to delay the action trigger over the 3 buttons such that it fades out again in let's say 10seconds. Also, when the timer starts on any of the buttons I can rollover on any of the buttons and it overwrites the action from any previously rolled over buttons.
Does that make sense and anyone can help me please. This is urgent as I'm trying to solve this problem and deadline is end of this week.
Thanks
Ben

i generally only download and correct files if i'm hired to do so. if you want to hire me, send an email via my website ( www.kglad.com ).
if you want free help in this forum, you're more likely to receive it if you ask a question focused on a particular problem.

URGENT: ACCOUNT No. Problem

Hi,
I am facing a problem that when i check FI documents in MIGO then there is a Document number and it is stored in BSEG table. and when i check in the BSAK or BSIK table it is not present. when i check it in the tcode FBL3N THAT DOCUMENT is present and there is tick mark against it as it is in the open item coloumn.
plzzz tell me what is the functionality of it as it is really urgent to me.

Hi Abaper2008,
if you post GR with migo the document looks like the following:
Stock account debit / GR-IR account credit
   -(BSEGBSAS)          BSEGBSIS
                or
PL account debit / GR-IR account credit.
     (BSEGBSAS          BSEGBSIS
This means you have no vendor in this posting.
The invoice will be posted with miro:
GR-IR debit   /   vendors account credit
BSEGBSIS -   BSEG/BSIK
GR/IR is cleared:
(BSEG+) BSIS -> BSAS
Inoice is cleared
BSEG+ BSIK -> BSEG+BSAK
Best regards
   Horst

Urgent!! Problem using NAS 3.0 TemplateMapBasic

We are using NAS 3.0. For passing the data to the template,
we are using the TemplateMapBasic object. But due to the requirement after setting the data, once again we need to get the data from this map object and modify it. For getting the data we are using getString() method of TemplateMapBasic. The data being set to this object initially contains some Japanese characters data also. When i am retreiving the data, that time the data is coming in some unreadable format. And this
problem is only coming when i am running the code in UNIX environment. I am getting the data correctly on NT. When i tried to print the system encoding on both unix and NT, the encodings are coming as different. For Unix, the encoding is MS932, whereas for NT, the encoding is coming as SJIS. Please let me know is this problem due to some system encodings problem or it is due to TemplateMapBasic's getString() method.
If anyone faced this problem, please let me know the solution.
It is very URGENT..
Thanks..
Anshumn

I am experiencing the same problem with CCA 3.0.1 (EN) and a new SR520W (Fast Ethernet) router.
Attached is a screen shot of the point of failure in the CCA Device Configuration Wizard.
In the Wizard, clicking the Modify button in the WAN configuration page is a repeatable show stopper.
Please let me know with this bug is fixed. Until then, I will need to do the Device Configuration using a command line terminal.
Arnold

Captivate Reviewer problem

I have been using Adobe Captivate Reviewer to share my
projects with other members our team. I publish the CREV files to a
shared drive via its UNC path (\\server\name\of\directory). The
comments location is published to the same directory (ACR creates a
directory with a time and date stamp tacked onto the file name,
like this): name_of_project_dd.mm.yy.hh.mm.ss).
That has been working just fine. But now, one of the CREVs,
when launched, says "Shared location in use" and prompts the user
for a local directory. Navigating to the directory on the share
doesn't work; it produces the same error.
Of the six projects I sent out for review, only this one
prompts for a different comment directory. I've tried creating a
new directory on the share just for this project, but that fails
too (with the same error). Any ideas?
Thanks,
James

Hi James,
I am having the same problem. Were you able to resolve your issue or find a workaround?
Thanks,
Liz

Urgent-need authorware 7 FULL installer

Hi all:
Evidently Macromedia no longer makes the FULL installer for
Authorware 7 - I need this player FULL installer to help a customer
who is using it. Can someone please give me the link or email me
the player - I need this asap.... By the FULL installer I am
referring to the one that creates the AW70, AW65, AW50, AW40 etc
folders all at once when you install it under
windows\system32\macromed\authorwa\np32asw folder...... Please make
certain yours does this before emailing me back... On the Adobe
site, it doesn't install those folders above and I need to
experiment with the specific player installer I mention and not the
newest one.....
Thanks
Patrick
[email protected]

Your frustration is somewhat understandable, but you're
letting it get
in the way of working out the problem...or you just don't
grasp the way
identifying the web player works in an HTML document (which,
if true,
you really should put some effort into understanding).
When you web package an Authorware application, a 'parent'
HTML document
is created. In OBP, you choose what player you want the HTML
to attempt
to download to the user if that player does not exist on
their system.
In Authorware 7 you can, of course, choose the Full Player,
which then
adds the 'codebase' for that player to the HTML document.
The codebase contains a link to where that player is located
on
Macromedia's (Adobe's) server. If you copy/paste that link to
your
browser address bar, you can download it just as you would
any other file.
To spare you further frustration, this is the codebase link
OBP
generates in an HTML document when the Full Player is
selected:
http://download.macromedia.com/pub/shockwave/cabs/authorware/awswaxf.cab#version=7,0,0,70
(beware wrapping)
I entered that into my Firefox address bar and was asked if I
wanted to
save the file, so it is present on Adobe's server.
Good luck!
Erik
MrGalaxy wrote:
> Steve:
>
> Arg....Adobe has removed the Full 7.0 installer from
their website.....they only have the MAC version available....
Trust me, I have looked and looked....
>
> Patrick
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Urgent :Captivate - Authorware Problem

Similar Messages

Maybe you are looking for