Urgent-change the end date for a existing wage type.

Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,

Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

Similar Messages

CRM-ISU: Need to change the END date and Start Date for contract items

Hi,
There is an old contract item for which I need to change the end date
and there is a new contract item for which I need to change the start date.
I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
but how to change the start date of a new contract item?
Please let me know if any body is aware of this?
Thanks

Hi,
Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
Regards,
Surjith

Short dump while changing the end date of infotype 0167 through PA30

Hi all,
I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
dump descript is as below
An exception occurred that was not caught.
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_HRPA_VIOLATED_POSTCOND
Date and Time          11.03.2010 07:06:26
What happened?
    The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
     caught anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
    terminated.
thanks
shahid

Search OSS Notes for that.

How do I change the start date for the week from Monday to Sunday on my iPhone 5?

How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

XD02 transaction to change the customer data for updating KNA1 table?

Hi all,
How can we use XD02 transaction to change the customer data for updating KNA1 table?
Give the steps.
Thanks in advance
rk

Hi KR,
Why don't u use BDC to run XD02.
With Regards,
Zafar Ali

How to change the table's for an existing report

Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
Abhishek

In the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl

Can I change the count date for a PI Document?

Dear All,
By mistake, I entered count date as 30-Sep-2010 instead of 01-Oct-2010 while entering count for a PI document.
Now, Can I change the count date to 01-Oct-2010 ?
The issue here is I am not allowed to post the difference today since the count date belongs to the previous period which is 09 2010.
pls suggest how can I resolve this issue?
regards,
Shetty

Hi Shetty,
I am assuming your issues is around posting the PI document and the count date i.e.Posting period is in last month and hence you are stuck.
If your client is ok to perform posting in previous period then try MMRV and allow posting in previous period and complete the Inventory counting posting and adjustment (write off differences and revert back the settings)
Other option would be to used above suggestion post PI doc without difference. Then create new PI document with correct count date.
Hope this helps.
Thx
MJ

Is there a way to change the Digitised Date for Mov files in Lightroom?

I am scanning some old photos. Unfortunately Programs such as Dropbox and OneDrive display Mov files by their digitised Date.
Consequently, My scanned photos are shown by the date that I scanned them. I can not seem to find anyway in LightRoom to change the Digitised Date so that they are shown on OneDrive/Dropbox in the correct order on my iPad.
Any help would be appreciated.

Your subject line says "Mov files" (which are video files), but your message talks about scanning old photos. I'll address the old photos issue.
Because there are so many dates/times associated with photos, and because every program feels free to use its own names, it's critical to be pedantically precise about terminology. The date/time a photo was originally taken (when the shutter was pressed) is called Date/Time Original or Capture Date. The date/time a photo was transferred to digital media is called Date/Time Digitized (when the analog file was scanned or when the digital-camera shutter was pressed).
A good rule of hygiene is to ensure every photo has a Date/Time Original (capture date). Typically only digital archivists care about maintaining Date/Time Digitized. If you ensure that every photo has a Date/Time Original, then pretty much any modern app and Web site will order your photos correctly.
In LR, you set Date/Time Original using the Metadata > Edit Capture Time command. By default, LR won't write the capture time back to the file's metadata, so depending on how you are transferring photos to other programs, the capture time won't necessarily get transferred. So you either need to do Metadata > Save Metadata To File, or better, set the option Catalog Settings > Metadata > Automatically Write Changes Into XMP.
Unfortunately, LR's Edit Capture Time isn't very flexible with dealing with scanned photos in which the precise date/time is not known. So some people like to set an entire batch to, say, 1963/10/01 00:00:00, while others like to have each photo set in increasing increments of 1 second, so that programs will at least maintain the known relative ordering (which comes from the film or slide ordering). To do that, you'll need a third-party plugin, e.g. ExifMeta or CaptureTime To EXIF.

Changing the hightlight color for all existing highlighted text

Is there a quick way to change the hightlight color of all existing highlighted text in a document? Thanks.

Never mind I found it. Open the Comment panel, select all existing comments, right-click and select Properties, change to your desired setting, click OK.

To change the classification data for a material using BDC

I have to update clssification data for material in MM02 using BDC so when i record the transaction MM02 using SHDB i am not able to see the value assignment window which i a able to see when i am changing using MM02 transaction directly. So can anyone have an idea regarding this ?
I have even tried updating classification data using a BAPI BAPI_OBJCL_CHANGE but i am not getting desired results....can anyone suggest me what are the parameters need to be passed to the BAPI. Thanks in advance for your help....

Hi Nagarjuna,
<b>BAPI_OBJCL_CHANGE</b> : This BAPI changes an existing classification, or creates the classification if it does not yet exist. The classification is defined by the required entry fields for the object key (ObjectKey), object table (ObjectTable), class name (AllocDetail-Class_Num), and class type (AllocDetail-Class_Type). The default value for the optional date field (KeyDate) is the system date, on which all classifications become valid. The new characteristics and/or values are transferred to different tables according to data type. Numeric, time, and date characteristics are transferred to table AllocValuesNumNew, character and boolean characteristics are transferred to table AllocValuesCharNew, and currency characteristics are transferred to AllocValuesCurrNew.
The object key (OBJECTKEY) must be transferred in internal format. This means before conversion exits. For example, a material number must be transferred with leading zeros.
If the BAPI runs without errors, table Return contains no messages of type "E".
Assignment created: message CL735
Assignment changed: message CL737
Assignment not changed: message CL738
This BAPI only changes the parameters of an existing assignment (or creates a whole new assignment), but it does not delete the assignment to a class and replace it with an assignment to another class. If you want to reassign an object, the old assignments must be read with BAPI_OBJCL_GETCLASSES and deleted with BAPI_OBJCL_DELETE, then the new assignments must be created with BAPI_OBJCL_CREATE.
The information transferred by this BAPI replaces all old information. An empty field means "delete entry!", not "no change".
This BAPI does not change the database. To change the database, call BAPI BapiService.TransactionCommit afterwards.
You can only use this BAPI for objects that are not classes!
This BAPI only processes assigned values for classification - not for configuration.
Reward points if helpful.
Regards,
Hemant

I want to change the end date in SAP HCM Appraisal model

Hi all,
The short dump gives out this message:
Object type SUBTY cannot be read for message type HRMD_A from segment type E1PLOGI
i want to change end date of the appraisal model multiplier, where i have to go and change the same.

declare variable:
DATA : gv_date(10) TYPE c.
and assign value to it:
CONCATENATE sy-datum+4(2) sy-datum+6(2) sy-datum(4) INTO gv_date SEPARATED BY '/'

How to change the created date for a file?

I searched and found someone had asked this question last month, and an answer given was to try the site:
http://danilo.ariadoss.com/howto-change-date-modified-date-created-mac/
which I had previously found. However, when I follow the instructions I get a message stating "-bash: -t: command not found"
I have gone through this numerous times, always with the same result. Is it possible that the direction given are not valid for Snow Leopard?
Thanks for any help.

First, thanks to both of you for helping - I hadn't realized that the 'touch' was part of the command itself. However, when I type in:
touch -t 0904131115/Users/RobertFately/Desktop/suttonallen/suttonallen.jpg
to test the procedure (there is a jpeg file I made today named suttonallen inside a directory of the same name) I get this error message:
touch: out of range or illegal time specification: [[CC]YY]MMDDhhmm[.SS]
This happens if I use the full year (2009) or just the last two digits (09) as seen above. My thinking is that I am attempting to redate the "create date" to April 13th of this year with an arbitrary time of 11:15AM.

After Changing the start date for a task in a project we are not able to save

Hi
When we are updating the task start date of a particular task the below message is poping up in Project Professional and when we trying to update in Pwa and saving it automatically the save is becoming undone.
We are logging in with that user credentials and checking where the user has not charged any actuals on that task.
Then a message pops up saying:
"The actual work in "xxxx" is out of sync with the actual work updated from timesheets. Actual work can only be updated by team members through PWA. Changes you have made to users' actual work will be lost during the save."
Can any body throw some light on the above issue.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

It seems you have enabled the option in server setting >> task Settings and Display >> Protect User Updates>> for restricting updates to PWA only ? this is one cause when this error message appears when the update restriction is to PWA
and PM tries to modify the Plan, the only exception to this is milestones which can be updated via Proj pro,
this being the case becomes a conflict when you say updates can be done only via PWA and try to overwrite the actual via MSP
kirtesh

How to change both start and end dates for an business event (or any object

Hi all.
We are in the case to change the validity dates for several business events in training management.
The special point is that both, start and end date, have to be changed.
In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
Is there any better solution for this?
Thanks in advance for your help.
Best regards.

Hi,
I gueass the best solution is to use PV1A t-code.
You can write an LSMW for this t-code if the number of business events to be maintained is huge.
Regards,
Dilek

How to change the posting date in UD stock posting for a HU managed item?

Hi,
We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
Thanks & Regards,
Madhavan Krishnamoorthy.

I don't think you can.
Craig

Urgent-change the end date for a existing wage type.

Similar Messages

Maybe you are looking for