Urgent : CO/PA Datasource Transport from R/3 DEV to R/3 QA

Hello!
I am trying to transport the CO/PA datasources that show up in RSA6 in R/3DEV to R/3 QA. All the transports have been moved. Nothing shows up in RSA6 of QA. I can display the datasource in KEB0 but cannot do the extraction in RSA3, as it gives the error 'It is not defined in the system".
I have already executed the program ZCOPACLT and that is how I can display the datasource in KEB0.
Am I missing something somewhere?
Any suggestions are welcome.
Kind of urgent. Appreciate your time.

Hi Sonal,
1) check in DEV if the extractstructure was generated there.
2) check the object list of the transport to see wether the extractstructure was included.
if the structure was not generated in DEV you might have to recreate the Datasource, unless anybody knows a better way.
if the structure is inactive (e.g because Description is missing) try to activate the structure and recollect the transport.
If the structure is available in Dev and active annd was not in transport you should recollect and retransport.
Sorry, thats all I can think of right now.
Michael

Similar Messages

DataSources transport from development to QA TESTING???

Hi Gurus,
I developed some objects in my D system using a generic extractions. I used 3 DataSources .
Ii transported all my SAP BW object in the testing system. now I need to collect my 3 DataSource in the R/3 development System to the R/3 system. Please can anyone show me the steps. I tried all day but no result. Please help me, I need the steps.
Thank You Gurus.

Hi
You are using Tbales, so collect Table if it is Z/Y table, if it is SAP table then not required.
1.Collect Tables and DataSources in request and transport from D ECC to Q ECC.
2.Replicate DS in Q BW system.
3.Collect InfoObjects and Transport from D BW to Q BW.
4.Collect Cube/DSO and Transport from D BW to Q BW.
5.Collect Multiproviders if you have any and Transport from D BW to Q BW.
6.Collect Transfer/InfoSource and Transport from D BW to Q BW.
7.Collect Update Rules and Transport from D BW to Q BW.
8.Collect Reports and Transport from D BW to Q BW.
Thanks
Reddy

Error 8 In Update,while doing transport from sandbox to Dev.

Hi All,
I am trying to transport some 100 queries from sandbox to development. I made a 10 queries in a single request and transported it from sandbox to development.First 6 transports went fine.(means 60 queries with out any issues).next 4 transport request ended with the Error 8 in update.
R3TRELEM42NJZNEBP9QAAI6BSCUZI8CYG original object cannot be replaced
R3TRELEM42NJZNEBP9QAAI6BSCUZI8CYG was not imported in this step
Start import R3TRELEM42NJZNM088BZT4PRY6XBSABO8 ...
R3TRELEM42NJZNM088BZT4PRY6XBSABO8 original object cannot be replaced
R3TRELEM42NJZNM088BZT4PRY6XBSABO8 was not imported in this step
Start import R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 ...
R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 original object cannot be replaced
R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 was not imported in this step
Start import R3TRELEM42NJZO1DA5JEUDSO9V20CE93S ...
R3TRELEM42NJZO1DA5JEUDSO9V20CE93S original object cannot be replaced
R3TRELEM42NJZO1DA5JEUDSO9V20CE93S was not imported in this step
Can you please give ur valuable Suggestion Please.
Thanks.
Srinivas

Try re-importing the transports with the following import options:
1) Overwrite Originals
2) Overwrite Objects in Unconfirmed Repair

Transport planning book from Production to Dev/ Test system

Hi APO Gurus,
I need clarity for below mentioned point u2013
I have a correct planning book in production system. I have a different structure in testing as well as in quality system. I want to transport planning book with all data views and macrou2019s associated with it to development system (or in test system).
How to do this? Please elaborate with details
Thanks in advance.

I did the transport from Production to Dev client using TSOBJ last week. Basis team helped in connecting Prod and Dev clients.
Everyting went ok except selection IDs. When I check 'with selection transport' in TSOBJ, it ends up in short dump saying Timed Out in reading SQL table /sapapo/sdpsetde. We increased the system profile parameter "rdisp/max_wprun_time" from 1800 seconds to 3600 seconds. It still timed out with same message. So, I created the transport without selection IDs and it worked.
Next, I downloaded the only required selection IDs (total 498) from the DP Planning Area in Production client to excel spreadsheet using table /sapapo/TS_SELKO. Then created another transport using TSOBJ.....this time I used the 'Transport of Selections' section for Selection IDs and used single value selection from drop down, uploaded the IDs from clipboard option. That worked.
Although my problem is solved....but by any chance, has anyone encountered that TSOBJ Timed out? Is there any OSS note for this?
-Sachin

What sequence to be followed to move tranport req's from r/3 dev- quality

Hi all
we are having our landscape as
r/3 dev -> bi dev
r/3 quality -> bi dev
r/3 prod -> bi prod
we are now in development and moving all our transport requests from r/3 dev -> r/3 quality. and our r/3 quality will be connected to bi dev.
we have to make a list of transport requests in a sequence taking care of all the dependencies.
Can anyone please explain what all things have to be taken care when making a list of our transport requests from r/3 dev to r/3 quality.
for example : Like we have many enhancements that are done to the standard datasources.
suppose we have list of transport requests like this what should be the order of preference.
1. request1-datasource activation.
2. request2- new append structure
3. request3-changes to extract structure (adding them from the pool into lbwe)
4. request4-new data element created for within the above append structure.
5. request5 - cmod code for transaction data zxrsau01 program
6. request6- cmod code for master data zxrsau02 program.
we have seen issues like we found some appended fields missing in quality system after transporting.
please help me with the sequence in which transport requests ( r/3 datasources )have to be transported from r/3 dev to r/3 quality
thanks
Krishna
Edited by: krishnav3.5 on Sep 2, 2011 10:56 PM

one last question
when transporting requests related to generic datasources from dev to quality or dev to pro what should be the order of transports.
is it the same order as for standard datasources?
we have following requests related to our generic datasource
request1: data element used in append structure
request2: request for append structure
request3 : data source activation.
What is happening is like when we are following the above order we see that in our datasource all the appended fields are hidden (hide tick).
so we have followed the order
request1
request 3
request 2
request3 again.
Can any one explain if this is that right order . becoz now we see all the append structure fields hide-untick but
importing request 3 twice seems something odd. can anyone explain why this is happening
regards

Reg: Error while transporting from Quality to Production

Hi ,
I am facing a problem while transporting ODS from quality to production.. The same works perfectly when i transport from Dev to quality.
The Error Displayed while transporting is
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when resetting DataStore Object to the active version
Kindly give me some suggestion ..
Thanks in advance
Regards
Guru

go to the source system RFC connection in SM59 and do a remote login - if you get the login page there then there is an issue with the RFC connection. also check if any other system is using the same RFC.. we had a situation where th R/3 connection was being used by 3 BI instances and everytime we reset the password , another system would lock the sme , ultimately we identified the systems and did a password reset in all the systems and then the issue got resolved.
but then we also faced the same issue you faced and it was related to login issues - check the remote login and that will tell you.

Datasource transport in BI 7.0 in SCM 5.0 fails

System Specification - SCM 5.0 with BI 7.0 SP10.
Is there a way to transport a new datasource created from a planning area from Dev -> QA. Right now I have tried many times to transport datasources and all of them have failed. In the past we had to either open the system or use a User with SAP_ALL and manually activate these datasources and then transport the remaining objects DTP's, TRNFMs etc.
Any other way to activate datasources, other then manual method.
Thanks,

Hi Satish,
You want to transport transformations. This transformation can be between datasrc and the infocube or any such 2 objects.
The target system where you want to transport this should have these 2 objects. They must be active in the target system.
If not then the request which you will transport should also have these 2 activated objects along with the transformation.
hope it helps...

Question to Datasource transport

I repulicate one datasource from R/3 to Production BI system using 3.5 version. However I used this datasource as 7.0 version, also created transformation based on the datasource in BI development system. Quesiton is if I transport request from BI development to BI production system, does this datasource with 3.5 verison will be changed automatically to 7.0 version? Are there any risk on it. Thanks!

Once u migrated Datasource to 7.0 in Dev, after transport it will appear as 7.0 datasource.. No need to migrate there in Production...
in prod system, after replication datasource will have the inactive status..
Now U have to transport same datasource from BI DEV to BI PRD... And this will overwrite the replicated inactive datasource

Datasources transport

Hi
i am transporting datasource from dev to quality. i have to manually replicate the ds in quality, rite.
what about infopackages from dev to quality. do i need to create infopackages in quality or do i need to transport from dev to qa
Regards

Hi Sanju,
Regarding Replication of DS...........
For R3 DS
1)Create DS in R3 and Replicate in BW-Dev
2)Transport it R3 Qualty
3)Replicate in Bw-Quality
if it is LO datasource rthe Procdedure is Slightly Diff............
1)Goto LBWE or SMQ1 and clear the Queues
2)Clear Delta Queues in RSA7 and
3)then Transport the DS to Qualty.
4)Check whether the DS is iin active version in Quuality
For FlatFIle DS
1)Transport it to BW-Dev to BW -Quality and Activate.--No dependecy of R3.
Creation of Infopaks ........As a Standard Procedure ,Create in Dev and Transport from Dev to Quality or Production.
Else u can create the INfopaks in Quality and Prodcution too.
Rgds
SVU123
Edited by: svu123 on Nov 12, 2009 7:25 AM

Replicated datasources transportation

i have created TR for all the datasources (3 generic and 1std(3.5)) in ecc DEV.I ahve also created TR for replicated datasources for the above in BWDev.
so, once the ECC DEV to ECCQA moves , DO I NEED TO REPLICATE THE DATA SOURCES AS I HAVE GOT REPLICATED DATAOUSRCES IN BWD ev?
2. what would happen if i manually replicate the datas soruces in BWQA, then transport replicated datasources from BWD evto BWQA
3. if i need not activate manually the datasoruce in ECCQA, then i should wait for the replicated datasources to reach BWQA, and then only transport other request?
4. how to transport ONLY PSA? what are the necessary steps to be taken?

Hello,
There is no harm in replicating the datasource in BI QA box...once you replicate them to get them activated you can send the transport request...
ARE u saying that after manually replicating in BIQA, the replicated datasources request from BIDEV to BIQA would activate the dataosources in BIQA?
Even if you dont replicate and send the replicated request it will do.
What i understand is that i can simply transport the ECC request to ECCQA , then just transport the replicated datasources from BIDEV t BIQA for replicating the datasources and then after this all the other BI requests should be imported?
my concern is that if i manually replicate the datasources in BIQ, then start importing all the BI request and i ahve got first 3 replicated datasources followed by other requests. so ,after the manual activation, once these replicated datasources moves, should i wait for reactivation of all the datasources and only then transport request of the transports?

Can not transport from DEV to PRD (Hang up)

Hi Experts,
Please help.. I have this problem, was not able to transport from Dev to Prod, it just hang up.. I've read a lot in web how to solve this problem and did the following:
   ==> Stop all TP running in OS level
   ==> Delete all pending job in Import Monitor (with truck logo)
   ==> and the last to be done is to delete the data from table TRBAT, but it took so long to delete the data in that table.. What I've noticed is that the data left in table TRBAT is the transport number wherein user was log-off during transport execution (as in the middle of the process)..
What should be the solution of this problem, as we can not proceed with the transport of our changes made in DEV system, as it just hang up in there.. and I'm also having this problem in deleteing data from TRBAT table.
Thanks.
Edited by: Deo Pasion on Feb 20, 2010 7:25 AM

Hi,
Its well known problem which is discussed many times in many threads.
Did you check TP System Log and TMS Alert of the System ?
Execute RSTPTEST report to check the STMS configuration. Also check the existence/status of RDDIMPDP Background Job.
Please refer these useful threads with similar symptoms.
[Transport (STMS) issue + Hang|Transport (STMS) issue + Hang]
[regarding STMS_IMPORT Transport Hang.|regarding STMS_IMPORT Transport Hang.]
Also check this SAP Note 71353 - Transports hang during background steps.
Regards
Bhavik G. Shroff

Moving XI transports from QA to Prod server

Hello,
We are getting ready to send our XI transports from the QA server to the production server. We are currently using the file transfer method - we have not yet finished setting up the CMS server.
Now my question is this:
For the Integration Repository, am I supposed to send the same file created from our dev server to the production server, or do I create a new transport file from our QA box and send that file to production? Same question applies to the Integration Directory.
For example, the FileA.tpz gets created in the dev server, exported to the QA server. Developers are done testing in QA and want to move the objects to production. Should I export the same FileA.tpz to the production box OR generate a new transport file from the QA server (FileB.tpz) and send that to production box instead?
Thanks in advance.

Joy,
Ideally you should move from Dev to QA and from QA to Prod. Then everything will be in sync. If you move directly from Dev to Prod and if there any changes then they will not be in QA. So this should not happen.
Because only after developement you will move to QA. Once when you test in QA then you will move to Production from QA.
Check this weblogs for further info:
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
---Satish

Ended with return code: === 8 === while doing transports from Dev to Test

Hi Experts,
We are doing transports from BD1 to BQ1 and getting this error message.
Could anyone please let me know why and what would be the solution for the following error message:
Execution of programs after import (XPRA)
Transport request   : BD1K900065
System              : BQ1
tp path             : tp
Version and release: 370.00.09 700
Execution of programs after import (XPRA)
End date and time : 20070803133308
Ended with return code: ===> 8 <===
Thanks in advance.
Best Regards,
Chandu.

Raymonds,
There is huge list of errors coming up. Some of them are as below:
Navigation attribute 0SALESORG is missing in characteristic 0PLANT
Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Thanks in advance.
Best Regards,
Chandu.

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

URGENT : Problem in DataSource usage in Client applIcation

URGENT : Problem in DataSource usage in Client applIcation
Hi ALL
I have deployed a EJB(Session Bean) in Oracle-OC4J Container.I am using datasources, in my bean as well as in my client
application.Here Client is deployed along with bean in container.
I am using "ejb-location"JNDI Name inside Client to get connection.
(Which is mentioned in datasource element of datasources.xml)
For this i have configured datasources.xml also.
If i use "oracle.jdbc.pool.OracleDataSource" in datasources.xml then ClassNotFoundException is coming.
But i have included classes12.jar in home/lib directory
But if i use "com.evermind.sql.ConnectionDataSource" then i am getting connection.But if i do some operations(Even
setAutoCommit(false))its giving NULL PointerException.
Why this is happening?
Thanx in advance
Venky

Hi Venkastesh,
There are two issues. If your entry is like this....
location="microDS"
xa-location="jdbc/xa/MicroXADS"
ejb-location="MicroPool"
...then use ejb-location for database calls through ejb and location when you try to get through normal java client.
This will help you.
regards,
Vijay
null

Urgent : CO/PA Datasource Transport from R/3 DEV to R/3 QA

Similar Messages

Maybe you are looking for