Urgent ,complaint summary report ??

Hi Gurus,
"The new complaint summary report is missing Location from the Ship-to Name/Location and Sold-to Name/Location fields" this is the problem.
Please let me know how to go abt this .. which tcodes do I need to refer.. do I need to look at CRMD_ORDER
if yes then how do I look at the report ??
I'll reward points for this ..

Hi Ravi,
Thanks for your reply ..
Is this the right site .. I get an error message ...
could you please send all the possible CRM Forum sites
were I can place query.. to it...
Rgds,
Aryan

Similar Messages

Complaint Summary Report

Hi Gurus,
........Points Guaranteed ........
Below is my issue....
The new complaint summary report is missing Location from the Ship-to Name/Location and Sold-to Name/Location fields.
Please guide me how to go abt things ...
1) which T-code do I need to refer to
2) how will I be able to see the report.
all the steps .. I am totally new to CRM ...
Regds,
Aryan

Hi Ravi,
Thanks for your reply ..
Is this the right site .. I get an error message ...
could you please send all the possible CRM Forum sites
were I can place query.. to it...
Rgds,
Aryan

Please help with creating a summary report from data collected in a fillable PDF form.

I'm sure this has been asked before so I apologize in advance - I'm new to this forum and I'm not quite sure of which section I should be in. If I may just describe a certain scenario of something I am trying to create - could you please point me in the right direction?
I'm looking to create a summary report/form to help me better organize my patients after each appointment. So data collected from other fillable forms I've created, will lead to the final page to print that will include selections from fillable text boxes or drop down lists, etc to basically summarize each encounter. It should go something like this:
FORM 1:
-pt chart #
-pg age
-purpose for visit
-date of visit
-diagnosis
-prognosis
-etc
SUMMARY page
On (-date of visit), patient (-pt chart #) arrived with complaint of (-purpose for visit)....
The diagnosis was determined to be (-diagnosis), treatment to be performed is suggested to be (-treatment) with a (-prognosis) prognosis. Treatment was (accepted or not) and completed on... etc. etc... you get the idea
Does anyone know how I can do this?
Thank you all for your time and advice!

I have downloaded Castor and got some good tutorials, but.......
There is a problem, when I try to use the Marshaller to get an XML document the following error is reported:
java.lang.NoClassDefFoundError: org/apache/xml/serialize/XMLSerializer
I have scanned the Internet looking for a solution, some recommend including Xecers in the Classpath. I downloaded Xerces 2.7.1 and added it to as instructed but this did not work.
Hope you can help

Actions Create Complaint Summary

Hi Gurus,
I've an action named Create Complaint Summary in crmd_order which prints a report i.e (either sapscript or smartforms ) how do I find that program name and
form name
points guaranteed .. revert back soon

Hi Aryan,
Follow the path :
SPRO --> Customer Relationship Management --> Basic Functions --> Actions
--> Actions in Transactions --> Change Actions and Conditions --> Define Action Profiles and Actions -->
Select the Action Profile --> Double Click on Action Definition --> Select the Action Name
--> Double Click on the Processing Type --> You will be able to see the program name
<b>Reward points if it helps.</b>
Regards,
Amit Mishra

Stock summary report monthwise

hi all,
As per client requirement i need stock summary report.
The closing stock value of report should tally with mc.9 tcode closing stock value for that particular month.
I have one stock report, but its not the purpose of mc.9
If any body having which matches above requirement
plz send the code.
Its very urgent..
Thanks in adv
srividya

Hi,
As said earlier, current stock, i.e current month stock should be available in MBEW
where as MBEWH should definitely contain the value of the previous months for any material/plant combination, as its a std sap table and the stock field keeps get added/reduced during any goods receipt/reversal/invoice etc.
Are you checking this data in Production client or any other client.
Ther ould be a diffrence between the live data in production system compared to other systems, as refresh of data happends only at regular intervals.
Hope this helps.
Regards,
JLN

Historical Report CSQ Call Distribution Summary Report

You can filter the Contact Service Queue Call Distribution Summary Report by either of these parameters:
- Contact Service Queue Names
- Time Interval (sec) T
can we filter this report with both paramters mentioned above together(CSQ & Time)
or at least can we change the default value of "Time Interval(sec) T" from 15 sec to another value?
it is urgent,
regards,

Excuse me but it seem you didn’t get my point,
My question is to have one report filtered by two parameters simultaneously, CSQ name + Time Interval.
and I was guessing, if there is no way to choose both parameters simultaneously in filtering the same report, if there is a way to set the default time parameter to for example 10 sec, so in a way if i choose the parameter CSQ name the interval taken is 10 sec and not 15 second (the default value for time).

PURCHASE & SALE SUMMARY REPORT

hi....
i want T-codes for getting PURCHASE & SALE SUMMARY REPORT ALONG WITH VENDOR & CUSTOMER WISE ALSO.
Thanks & Regards
Rekha Sharma

hi...
by these t.code i not found any result pls do needful.
i want vendorwise/customerswise purchase/sale summry. It should show Purchase/Sale Qty. & amount.
Thanks & Regards
Rekha sharma

At new statement for Summary report

Hi,
I have made a vendor balance report having debit and credit entry in on eintrenal table IT_BSIK, with all line item detail in another table IT_TAB1 i want to make summry report by adding all the amount of of line item it is also working fine but i wan tto change the summary report i want summary for debit and credit entery seperate How to do it find Below the code part for summary how to use AT NEW SHKZG then append the IT_TAB1
find the code here.
**********************summarised part
   loop at it_lfnr.
      Clear : VTOTBAL, vNtdue, vDue, vDue0, vDue31, vDue61, vDue91,V1TOTBAL.
      loop at it_bsik where lifnr = it_lfnr-lifnr.
          IT_TAB1-LIFNR = IT_BSIK-LIFNR.
          IT_TAB1-BUKRS = IT_BSIK-BUKRS.
          IT_TAB1-SAKNR = IT_BSIK-SAKNR.
          IT_tab1-NAME1 = IT_bsik-NAME1.
         ADD IT_BSIK-dmbtr TO V1TOTBAL.
         move V1TOTBAL TO IT_TAB1-dmBTR.
         ADD IT_BSIK-WRBTR TO VTOTBAL.
         move VTOTBAL TO IT_TAB1-WRBTR.
         MOVE IT_BSIK-WAERS TO IT_TAB1-WAERS.
         ADD IT_BSIK-NTDUE TO VNTDUE.
         move VNTDUE TO IT_TAB1-NTDUE.
         ADD IT_BSIK-DUE TO VDUE.
         move VDUE TO IT_TAB1-DUE.
         ADD IT_BSIK-DUE0 TO VDUE0.
         move VDUE0 TO IT_TAB1-DUE0.
         ADD IT_BSIK-DUE31 TO VDUE31.
         move VDUE31 TO IT_TAB1-DUE31.
         ADD IT_BSIK-DUE61 TO VDUE61.
         move VDUE61 TO IT_TAB1-DUE61.
         ADD IT_BSIK-DUE91 TO VDUE91.
         move VDUE91 TO IT_TAB1-DUE91.
       endloop.
        append it_tab1.
   endloop.
***********************************end of summarised vendor part ***************************

Hi,
loop at it_bsik where lifnr = it_lfnr-lifnr.
if it_bsik-SHKZG eq 'Debit.
   add all your fields to table itab.
else.
   add all your fields to table itab1.
endif.
endloop.
This way you will get debit data in table itab and credit data in itab1.
Then you can use At new lifnr for both tables separately and you will be able to sum it separately.
Hope its clear.
Thanks,
Archana

Stock summary report

hi
i am doing stock summary report
i am checking the data with mc.9 standard report
the total amount for particular month is not tallying with standard one.
data is coming with all the materials and with opening nd closing balances...
but it is taking the stock amount with inclusive of all taxes. i am using the field mseg-dmbtr.
but i need the material stock amount without taxes.
i tried with mbew table, but i didn't get closing stock amount.
values is there correct value in mbew but i am not able to get the correct value..
tell me anyother tables or give me any soln....
thanks nd regards
vidya

Go through this......
*& Report Z_OPEN_CLOSE                                                *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
        MSEG, " Material Document: Item Data
        MARA,
        MARD,
        S031,
        EKKO,
        EKPO,
        LIKP,
        MAKT,
        J_1IWRKCUS,
        T001W,
        WB2_V_MKPF_MSEG2,
        MMIM_REP_PRINT,
        YW2_STKMOVEMENTS,
        YPLNT,
        MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
         PPLNT LIKE YPLNT-PPLNT,
         WPLNT LIKE YPLNT-WPLNT,
      END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        MJAHR LIKE MKPF-MJAHR,
        BUDAT LIKE MKPF-BUDAT,
        VGART LIKE MKPF-VGART,
        BWART LIKE MSEG-BWART,
        MATNR LIKE MSEG-MATNR,
        WERKS LIKE MSEG-WERKS,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        KUNNR LIKE MSEG-KUNNR,
        ZEILE LIKE MSEG-ZEILE,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
        MATNR1 LIKE MSEG-MATNR,
      END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
       WERKS LIKE MARDH-WERKS,
       MEINS LIKE MARA-MEINS,
       MATNR LIKE MARDH-MATNR,
       LGORT LIKE MARDH-LGORT,
       LABST LIKE MARDH-LABST,
       LFGJA LIKE MARDH-LFGJA, "Added -MB
       LFMON LIKE MARDH-LFMON, "Added -MB
       PERIO(6),
       INSME LIKE MARDH-LABST,
       EINME LIKE MARDH-LABST,
       SPEME LIKE MARDH-LABST,
       RETME LIKE MARDH-LABST,
       O_STK LIKE MARDH-LABST, " Opening Stock
       C_STK LIKE MARDH-LABST, " Closing Stock
      END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
       WERKS LIKE MARD-WERKS,
       MATNR LIKE MARD-MATNR,
       LGORT LIKE MARD-LGORT,
       LABST LIKE MARD-LABST,
       INSME LIKE MARD-LABST,
       MEINS LIKE MARA-MEINS,
       EINME LIKE MARD-LABST,
       SPEME LIKE MARD-LABST,
       RETME LIKE MARD-LABST,
      END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        WERKS LIKE MSEG-WERKS,
        MATNR LIKE MSEG-MATNR,
        BUDAT LIKE MKPF-BUDAT,
        BWART LIKE MSEG-BWART,
        MJAHR LIKE MKPF-MJAHR,
        VGART LIKE MKPF-VGART,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
      END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
       WERKS LIKE MSEG-WERKS,
       MATNR LIKE MSEG-MATNR,
       BUDAT LIKE MKPF-BUDAT,
       BWART LIKE MSEG-BWART,
       MJAHR LIKE MKPF-MJAHR,
       VGART LIKE MKPF-VGART,
       LGORT LIKE MSEG-LGORT,
       MENGE LIKE MSEG-MENGE,
       MEINS LIKE MSEG-MEINS,
       XAUTO LIKE MSEG-XAUTO,
     END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       LGORT LIKE MSEG-LGORT, " Storage Location
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TLOSS LIKE MARDH-LABST, " Total Loss
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        TRFSTK LIKE MARDH-LABST, "Transfer stock
        MENGE LIKE MSEG-MENGE,
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        BUDAT LIKE MKPF-BUDAT, " Posting Date
        MTART LIKE MARA-MTART, " Material Type
        SPMON LIKE S031-SPMON, " Month
        MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
       END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        MTART LIKE MARA-MTART, " Material Type
        MAKTX LIKE MAKT-MAKTX, " Description
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
       MATNR TYPE MARA-MATNR,
       MTART TYPE MARA-MTART,
       MEINS LIKE MARA-MEINS,
       LABST TYPE MARD-LABST,
       MAKTX LIKE MAKT-MAKTX,
      END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
       BWART LIKE MSEG-BWART,
       SHKZG LIKE MSEG-SHKZG,
       VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
      END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
       MEINS LIKE MSEG-MEINS,
       O_STK LIKE MARDH-LABST, " opening stock
       TRECEP LIKE MARDH-LABST, " total receipts
       PRODU LIKE MARDH-LABST, " Net Receipts - Production
       RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
       SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
       TDISP LIKE MARDH-LABST, " total dispatches
       CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
       OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
       TRFSTK LIKE MARDH-LABST, "Material Transfer stock
       TRLOSS LIKE MARDH-LABST, " Transit Loss
       WHLOSS LIKE MARDH-LABST, " Warehouse Loss
       TLOSS LIKE MARDH-LABST, " Total Loss
       C_STK LIKE MARDH-LABST, " Closing Stock
       OTHADJ LIKE MARDH-LABST,
       MONTH(8) ,
      END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                  WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
      FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
      FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
      FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
      FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
      FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
      FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                WITH HEADER LINE INITIAL SIZE 0,
      FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
      GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
      FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
             WITH HEADER LINE INITIAL SIZE 0,
       FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
              KEY WITH HEADER LINE INITIAL SIZE 0,
       G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
       ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
      MON(2),
      FYEAR1(4),
      MON1(2),
      OBAL LIKE MARD-LABST,
      CBAL LIKE MARD-LABST,
      INDEX TYPE I,
      COUNT,
      COUNT1 TYPE I,
      O_STK TYPE P DECIMALS 3,
      C_STK TYPE P DECIMALS 3,
      V_MJAHR LIKE MKPF-MJAHR,
      MONTHS TYPE TRFF_TYPE_DEC_6_5,
      MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
      ALV_VARIANT LIKE DISVARIANT,
      ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
      ALV_REPID LIKE SY-REPID,
      ALV_PRINT TYPE SLIS_PRINT_ALV,
      ALV_DETAIL_FUNC(30),
      ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
      ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
                  S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
                  S_MBLNR FOR MKPF-MBLNR,
                  S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
      PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
              M1 RADIOBUTTON GROUP P1,
              Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
    MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
    IF S_BUDAT-HIGH IS INITIAL.
      S_BUDAT-HIGH = S_BUDAT-LOW.
      MODIFY S_BUDAT.
    ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
    EXPORTING
       I_DATE_FROM = IDATE-LOW
       I_DATE_TO = IDATE-HIGH
   IMPORTING
E_DAYS =
      E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
    MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
    R_BUDAT-LOW = S_BUDAT-LOW.
    APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
    R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
    I = I + 1.
    R_BUDAT-LOW+6(2) = '01'.
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
       EXPORTING
         DAY_IN = R_BUDAT-LOW
       IMPORTING
         LAST_DAY_OF_MONTH = R_BUDAT-HIGH
      EXCEPTIONS
        DAY_IN_NO_DATE = 1
        OTHERS = 2
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
      R_BUDAT-LOW = S_BUDAT-LOW.
      MODIFY R_BUDAT.
    ENDIF.
    IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      MODIFY R_BUDAT.
    ENDIF.
For Summary on 26.4.05.
    IF Y1 = 'X'.
      CLEAR R_BUDAT.
      REFRESH R_BUDAT.
      R_BUDAT-LOW = S_BUDAT-LOW.
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      APPEND R_BUDAT.
      CLEAR R_BUDAT.
    ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = '12'.
    FYEAR = FYEAR - 1.
ELSE.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = MON - 1.
    FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
    IF Y1 = 'X'.
      LOOP AT S_BUDAT.
        S_BUDAT1-SIGN = 'I'.
        S_BUDAT1-OPTION = 'NB'.
        S_BUDAT1-LOW = S_BUDAT-LOW.
        S_BUDAT1-HIGH = S_BUDAT-HIGH.
        APPEND S_BUDAT1.
        CLEAR S_BUDAT1.
      ENDLOOP.
    ENDIF.
    IMKPFT[] = I_MKPF[].
    IMKPFT2[] = I_MKPF[].
    IMARDT[] = I_MARD[].
    IMARDHT[] = I_MARDH[].
    PERFORM MONTH_WISE.
    PERFORM PROCESS_MOVEMENTS.
    PERFORM CALCULATE_OPENING_STOCK.
    PERFORM UPDATE_NON_TRANSACTION_ITMS.
    PERFORM DELETE_EMPTY_RECORDS.
    CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
    REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
          INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
         MF_MONAT LIKE ISELLIST-MONTH,
         MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME               = MF_HLP_REPID
        DYNUMB               = SY-DYNNR
      TABLES
        DYNPFIELDS           = MF_DYNPFIELDS
      EXCEPTIONS
        INVALID_ABAPWORKAREA = 01
        INVALID_DYNPROFIELD = 02
        INVALID_DYNPRONAME   = 03
        INVALID_DYNPRONUMMER = 04
        INVALID_REQUEST      = 05
        NO_FIELDDESCRIPTION = 06
        UNDEFIND_ERROR       = 07.
    IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
      MF_HLP_REPID = 'SAPLALDB'.
    ELSE.
      READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
      TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
      EXIT.
    ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
    CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
      EXPORTING
        INPUT         = MF_DYNPFIELDS-FIELDVALUE
      IMPORTING
        OUTPUT        = MF_MONAT
      EXCEPTIONS
        ERROR_MESSAGE = 1.
    IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
      MF_MONAT = SY-DATLO(6).
    ENDIF.
    CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
      EXPORTING
        ACTUAL_MONTH               = MF_MONAT
      IMPORTING
        SELECTED_MONTH             = MF_MONAT
        RETURN_CODE                = MF_RETURNCODE
      EXCEPTIONS
        FACTORY_CALENDAR_NOT_FOUND = 01
        HOLIDAY_CALENDAR_NOT_FOUND = 02
        MONTH_NOT_FOUND            = 03.
    IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
      CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
        EXPORTING
          INPUT = MF_MONAT
        IMPORTING
          OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
      COLLECT MF_DYNPFIELDS.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          DYNAME               = MF_HLP_REPID
          DYNUMB               = SY-DYNNR
        TABLES
          DYNPFIELDS           = MF_DYNPFIELDS
        EXCEPTIONS
          INVALID_ABAPWORKAREA = 01
          INVALID_DYNPROFIELD = 02
          INVALID_DYNPRONAME   = 03
          INVALID_DYNPRONUMMER = 04
          INVALID_REQUEST      = 05
          NO_FIELDDESCRIPTION = 06
          UNDEFIND_ERROR       = 07. "<<== note 148804
    ENDIF.
ENDIF.
ENDFORM.                                                    "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
    CLEAR S_BUDAT.
    REFRESH S_BUDAT.
    S_BUDAT-SIGN = 'I'.
    S_BUDAT-OPTION = 'BT'.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
    APPEND S_BUDAT.
ELSE.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
    MESSAGE I041 WITH TEXT-005.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
    CLEAR S_BUDAT.
    LOOP AT S_BUDAT.
      CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
      S_BUDAT-LOW+0(4) INTO LOW.
      CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
      S_BUDAT-HIGH+0(4) INTO HIGH.
      CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
      FHEADER-TYP = 'H'.
      FHEADER-INFO = V_FIN1.
      APPEND FHEADER.
      CLEAR FHEADER.
    ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_TOPOFPAGE'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_USER_COMMAND'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

Summary Report For Store Activities.

Dear Gurus..
I need to make a summary report on Store Activities.
Having following Fields.
Material number | Material Description | Material Unit | Opening Balance | Quantity | Receipts | Quantity | Issues | Quantity | Closing Balance | Quantity |
Please guide me..
Which tables will be required.

Dear Sir.
I have uploaded a PDF file for your reference .
this is the out put my client want .
[Summary of Store Activities.|http://www.geocities.com/saadnisarahmedkhatib/ABAP/File0003.PDF]
Regards
Saad Nisar

Summary Report using Master-Detail Data on Siebel BI Publisher Report

I have to create a Summary Report using Master-Detail relationship. Report fields are Account Name, Special Need Type, Customer Status, No of Customers, No of Claims. I am using rtf to create template and any help is highly appreciated
<?xml version="1.0" encoding="UTF-8" ?>
- <ListofIO>
- <ListOfBipCustomerSpecialNeeds>
- <Account>
<Name>CVNE</Name>
- <ListOfContact>
- <Contact>
<SpecialNeedsFlg>Y</SpecialNeedsFlg>
<SpecialNeedsType>Large Text</SpecialNeedsType>
<PersonUId>1-6NI9</PersonUId>
- <ListOfContact_Claims>
- <Contact_Claims>
<AccountNumber>TEST0015362272</AccountNumber>
<ClaimNumber>1-4FVL</ClaimNumber>
<ClaimStatus>Closed</ClaimStatus>
<ClaimGBPAmount />
</Contact_Claims>
</ListOfContact_Claims>
</Contact>
- <Contact>
<SpecialNeedsFlg>Y</SpecialNeedsFlg>
<SpecialNeedsType>Braille</SpecialNeedsType>
<PersonUId>1-L0A</PersonUId>
- <ListOfContact_Claims>
- <Contact_Claims>
<AccountNumber />
<ClaimNumber>1-ACX6</ClaimNumber>
<ClaimStatus>Open</ClaimStatus>
<ClaimGBPAmount>818.18196694218</ClaimGBPAmount>
</Contact_Claims>
- <Contact_Claims>
<AccountNumber />
<ClaimNumber>1-GI58</ClaimNumber>
<ClaimStatus />
<ClaimGBPAmount>45454.099173473</ClaimGBPAmount>
</Contact_Claims>
</ListOfContact_Claims>
</Contact>
- <Contact>
<SpecialNeedsFlg>Y</SpecialNeedsFlg>
<SpecialNeedsType>Large Text</SpecialNeedsType>
<PersonUId>1-6FPP</PersonUId>
- <ListOfContact_Claims>
- <Contact_Claims>
<AccountNumber>CVNE</AccountNumber>
<ClaimNumber>1-7BRL</ClaimNumber>
<ClaimStatus>Reviewed</ClaimStatus>
<ClaimGBPAmount>562</ClaimGBPAmount>
</Contact_Claims>
</ListOfContact_Claims>
</Contact>
</ListOfContact>
</Account>
<Login>SADMIN</Login>
</ListOfBipCustomerSpecialNeeds>
</ListofIO>
Edited by: user2298324 on 13-Aug-2010 09:36

Thanks for the reply. The many to many relationship between Claims and Payments are achieved through intersection table in siebel. When Customer has multiple claims, single payment issued for both claims. Also single claim can multiple payments such (part compensation, interests, final compensation etc)

Summary report treats a currency fields as text

In the summary report I have three charts with the currency field. The two charts show 'average' and 'total' but the other chart shows 'percentage' of responses - in other words the report treats that field not as a number but as text. The filed is designated as a currency in the desing view. Why is it treated as text?

Hi,
The percentage of responses is a reference for the responses of that field. If you don't want it to show, you can disable it.
Hope this help,
Perry

Reserve Summary Report Performance

We were running the Reserve Summary Report for all the FA books till aug-03 without any problem. In Sep-03, there was a performance issue for the US BOOK and Running Gather Schema Statistics for FA resolved the problem. From OCt-03, the report has been running endlessly for the US book. Running it from the command line takes only 15 minutes for the report to complete.
The problem did not occur for any other FA books. Anyone can think of anything? Any tip to see if there is any data issue?

Hi;
Please see:
Reserve Summary and Reserve Detail Reports [ID 171792.1]
Regard
Helios

Data Quality Services - Summary report

Hi,
Is anyone has a idea about which table is stored summary information comming out from Activity monitor?
the example is below:
when I exported the data the summary as follows:
My pourpose is to automate this report if it is stored on DQS data bases?
Field
Domain
Corrected Values
Suggested Values
Completeness
Accuracy
EmployeeName
EmpName
5 (0.06%)
0 (0%)
7303 (88.73%)
8222 (99.89%)
EmployeeKey
EmployeeKey
1 (0.01%)
0 (0%)
8231 (100%)
8215 (99.81%)
CostCentreKey
CostCentreKey
0 (0%)
0 (0%)
8231 (100%)
8141 (98.91%)
CostGroupKey
CostCentreGroupKey
0 (0%)
0 (0%)
7188 (87.33%)
7094 (86.19%)
LeaveGroupKey
LeaveGroupKey
0 (0%)
0 (0%)
8231 (100%)
8129 (98.76%)
EmployeeStatusKey
EmployeeStatusKey
0 (0%)
0 (0%)
8231 (100%)
8212 (99.77%)
EmployeePositionNumber
EmployeePositionNumber
0 (0%)
0 (0%)
8214 (99.79%)
8117 (98.61%)
EmployeeEmail
EmployeeEmail
0 (0%)
0 (0%)
5133 (62.36%)
8220 (99.87%)
HoursPerWeek
HoursPerWeek
0 (0%)
0 (0%)
8214 (99.79%)
8213 (99.78%)
Gender
Gender
0 (0%)
0 (0%)
8231 (100%)
8231 (100%)
EmployeeEFT
EmployeeEFT
0 (0%)
0 (0%)
8214 (99.79%)
8213 (99.78%)
EmployeePostCode
EmployeePostCode
0 (0%)
0 (0%)
8153 (99.05%)
8124 (98.7%)
EmployeeSuburb
EmployeeSuburb
133 (1.62%)
0 (0%)
8152 (99.04%)
8134 (98.82%)
ReportToManager
ReportToManager
0 (0%)
0 (0%)
7037 (85.49%)
7036 (85.48%)
PositionClassificationCode
PositionClassificationCode
0 (0%)
0 (0%)
8144 (98.94%)
8144 (98.94%)
PositionClassificationDesc
PositionClassificationDesc
0 (0%)
0 (0%)
8144 (98.94%)
8144 (98.94%)
PositionLocation
PositionLocation
0 (0%)
0 (0%)
8214 (99.79%)
8122 (98.68%)
Age
Age
0 (0%)
0 (0%)
8231 (100%)
8229 (99.98%)
CurrentClassCode
CurrentClassCode
0 (0%)
0 (0%)
7908 (96.08%)
7906 (96.05%)
CurrentCLassDescription
CurrentCLassDescription
0 (0%)
0 (0%)
7908 (96.08%)
7907 (96.06%)
EmpState
EmpState
0 (0%)
0 (0%)
8153 (99.05%)
8137 (98.86%)

0
Hi All,
I have utilized the DQS for my organization Data Cleansing project. And we have built Data Quality reports using DQ output.
We also use Profiler Summary report in the Activity Monitor, but this is manual process where Data owners need to manually enter into the Activity monitor and generet the porofiler report.
My question is, which DQS table store the this Profiler summary report where by I can automate the report through that source.
Here is the screenshot of the report we are looking at, we need to find out which DQS source table got this information.
Thanks for the help

Urgent ,complaint summary report ??

Similar Messages

Maybe you are looking for