Urgent Condition Tab Missing In Stock Transfer Order

Hi All ,
When I a m creating Stock Transfer Order from One Plant In one Company Code to Another Plant in another Company code the Invoice and Conditions Tab Is Missing .
How to get the Conditions tab, Do I have to do any Customization ?
Please suggest me of how to go about .....
Regards ,
Sriram.

Hi Srirama,
Yes, if you have only one Calculation schema then there is no meaning in assigning to different Porgs.
In that case please proceed with the following configuration.
This is done in customizing; IMG for MM > Purchasing>Conditions>Define Price Determination Process>Define Schema Determination>Determine Schema for Stock Transport Orders
For the combination of the Schema POrg; doc.type( UB ) and Supplying plant
you must specify the price schema to be used.
Hope this will solve your problem.
Regards,
DilliB

Similar Messages

Entering delivery costs in stock transfer order

I am entering delivery costs via a condition type in a stock transfer order. When I am doing MIGO, AUM key gets invoked which is a price difference key. How do I enter delivery costs in a sto order without the aum key getting invoked because really freight or delivery charges should not be hitting the price difference account
thanks

Understood why system does that

Could not create Purchase Order Stock Transfer Order

Hi Expert!
Need your help.
User could not make Could not create Purchase Order Stock Transfer Order for new plant 1075 & 1076 at P05 with error message Not posible to determine shipping data for material. Our new vendor are 510022060 for new plant 1075 and 510022061 for new plant 1076.
The problem was caused by the missing STO setup for these two plant 1075 and 1076, as no customer code being referred.
Now i got the customer number for these two plants but how to set it up in configuration? Please guide me step by step.

Hi Crystal,
The following customising need to be carried out for Inter Company Stock Transfer.
Path : sproMaterials ManagementPurchasing-Purchase OrderSet up Stock Transport Order
Define Shipping Data for Plants :
For the Supplying plant (1) the Sales Org data to be maintained.
For the Receiving plant (2) the Customer No to be maintained.
Create Checking Rule - U can use existing one Eg : B
Define Checking Rule : Use Standard one Eg :01 linked to B.
Assign Delivery Type and Checking Rule -- For the Supplying Plant (1) and document type NB use the delviery type NLCC and Checking Rule B.
Assign Document Type, One-Step Procedure, Underdelivery Tolerance :
For the supplying Plant (1) and Receving Plant (1) ; assign the document type : NB.
Points to be noted :
The Material should exists in both the plants ( 1 & 2 ) with the sales view maintained . Note that the Loading grp / Transporting Grp is mantaory in Sales Views.
The Vendor is to be assigned to the supplying Plant (1 ) in Purchasing View of Vendor Master.
For that click on Extras - Add Purchasing data in Purchasing view of Vendor Master (XK02 )
Do maintain the customer in Control data of Vendor Master.
Do maintain the Vendor in Control data of Customer Master.
Also note that shipping conditions are maintained in the Customer Master . The same can be found in Sales Area - Shipping Tab.
Shipping Point determination :
SPROLogistics ExecutionShippingBasic Shipping FunctionsShipping Point and Goods Receiving Point Determination--Assign Shipping Points ( For a particular Shipping condition/ Loading Grp /Plant - the shipping point is assigned ).
Regards
Ramesh Ch

Transaction to see the Open stock transfer order for the plant

HI ,
i need to develop one report in that client to make the report for the all open stock transfer order & the cost of the open stock transfer order for the plant .
I need how to cretae the stock transfer order for the material , whci material master is required for this process.
please give me step by step details for this .
regards
satish
Edited by: satish kapartiwar on Jul 16, 2009 9:33 AM

Hi Satish,
You can see open stock transfer quantity in MB5T and stock value in MB5L. If you want to make stock transfer, there is two types intra company transfer(with in same company code) and inter company transfer (different company codes).
Steps for Intra company stock transfer:
This is only within the comp.code(w/o SD)
(w/o SD) 351101 MvT. and (with SD) 641101
1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
Create customer (xd01) & and define the shipping data for plants in both the plants.
Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data
(1 by1 )
In Receiving plant (1100)
Customer num. 123345 (for ex.)
Sales org. yyy
Dist. Channel yy
Sales div. y
In Supplying plant (1000)
Customer num. -
(don't fill)
Sales org. yyy
Dist. Channel yy
Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
Position doc type is "UB"
Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
6.Assign doc. Type is "UB" to u'r plants.(PO)
Go for new entries
Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
7. Create a PO, choose the doc type is 'UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
11. See the stock overview in the receiving & supplying plants.
Steps for Inter company Transfer:
1) Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure, In Customer Master, sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group, Shipping Condition and Supplying plant combination, Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receiving Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
Regards,
Prasath

Stock transfer order error

Dear sir,
while doing me21n(stock transfer order i m getiing one warning message "Ship. point 3100 not allowed for ship. cond. 01, loading group 0001, plant 3100"
can u plz guide how to solve the issue i think i have mainted shipping data but still i m getting the same error.
thanks
Debesh Tripathy

Dear,
        I have checked for error message it is also telling that there is some issue in shipping point determination.
        I will request u to do the same exerise once again, GOTO LOGISTIC EXCUTIONBASIC SHIPPING FUNCTION-- SHIPPING
       POINT AND GOODS RECEIVING POINT DETERMINATION--ASSIGN SHIPPING POINT in following manner
        SC       LGrp      Plnt          PrShp      MShp
        01        001        3100       3100        3100
       and also check
       GOTO LOGISTIC EXCUTIONBASIC SHIPPING FUNCTION--
       SHIPPING POINT AND GOODS RECEIVING POINT DETERMINATION--STORAGE LOCATION DEPENDENT SHIPPING POINT
       DETERMINATION--DEFINE RULE FOR DETERMINATION OF SHIPPING POINT ( DOUBLE CLICK) and for ITEM CATEGORY NL
       put PLANT SPECIFIC SHIPPING POINT DETERMINATION and retry the whole process.
       If still problem exist then check ur MASTER RECORD for CUSTOMER and MATERIAL.
       For CUSTOMER ( which u have assigned for PLANT )use XD02 and select SALES AREA TAB and goto SHIPPING TAB
       under which u will find SHIPPING CONDITION FIELD,do check it is 01 or something else.
       and for Material use MMO2 and goto SALES:GENERAL/PLANT TAB there u will find LOADING GROUP, do check whether it
       is 001 or something else.if still not work then revert back.
Regards
AJIT K SINGH
HAPPY TO HELP U
Edited by: AJIT K SINGH on Dec 2, 2009 9:38 AM

Table for the PO Date and Stock Transfer Order Date of a material no

Hello Everyone!
I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
I am not getting the table through which I can get these two dates for a material.
Please help me out.
Its urgent.

hi,
see these tables:
     EKKO Purchase Order Header Table
     EKPO Purchase Order Item Table
     EKBE PO History table.
reward if its useful

Capture Excise Invoice w.r.t Stock Transfer Order

Hi all,
Can anyone explain me how to Capture Excise Invoice W.r.t Stock Transfer Orders.
right Now i'm follwing below Steps
1. Create STO in Issuing (sending ) plant with duty and CVD conditions.
2. Issue Material to Receiving PLant using 351 Movement.
3. Book the CVD Condition thru MIRO Transaction
4. Capturing Excise Invoice w.r.t Stock Transfer Order.
5. Receive the material in Plant( 101 Mvmt).
I had Few Query at step 3 and 4.
Q1. While capturing Excise Invoice w.rt STO system is not taking CVD number as reference in Commercial Invoice Field.
Q2. It gave me the Msg Like Excise Invoice XXX does not Exist in PLant B2B ( B2B is my sending Plant).
does that mean i have to first create the excise invoice in sending plant?
if yes, how can i create pls provide step for this.
this excise invoice need to be created in reference to STO or In refernce to 351 mvmt document.
Regards,
Sheo Anand Singh

Hi Anand,
Commercial Invoice number is the invoice number u have created in your Step-3, not the CVD number.
Hope this clarifies.
Thanks,
Viswanath

RE: Intercompany stock transfer order process

hi SD Experts,
I really appreciate if anyone explain me how to execute Intercompany stock transfer order with intercompany billing scenario.
I used T-Code ME27, but unable to do delv and intercompany billing
thanks in advance
regards
vaseem

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Stock transfer order

Hi Gurus,
While doing Stock Transfer order - assigning deliverying plant
to sales organisation : I could not assign and message is giving :
"The sales org is part of company code Z222, Plant Z223 is part of company code Z223. Organization data for inter company billing missing in plant Z223."
For you kind information :
I have maintained regular enterprise structure ie everything is Z222 means comp code, plant, shipping point etc. for my memory.
Stock transfer order step
Step 1 I maintained another enter prise structure ie. everything is Z223 company code, plant etc.
Step 2 Intercompany billing customer, I assignd customer no. in relevant sales org ie, Z222
Step 3 I am assigning deliverying plant ie Z223 to sales organisation ie Z222 but I could not assign, the message has come.
Kindly anyone help me out.
Thanks
rakesh

Hello.
Go to SPRO --> Materials Management ---> Purchasing ---> Purchase Order ---> Set Up Stock Transport Order --> Define Shipping Data for Plants. Select the ordering plant (Z223) and assign the intercompany customer, and the sales area of the deliveing plant.
Once you maintain this try to assign the Delivering plant (Z222) to Ordering sales organisation (Z223) and Distribution channel.
Prase

Stock transfer order between 2 plants in same company code

Dear All,
We have the requirement, where in the stock tranfer order (between 2 plants in same company code) instead of Material valuation price, MAP/Standard (depends on Price Control) gets picked up from supplying plant ,user should be able to enter its own price while creating stock transfer order.
For fullfilling this requirement, I have created new condition type(where i have changed condition category from internal price "G" to "H" - Basic Price)
Instead of using condition type- P101 in the stock transfer pricing,I have used above created new condition type, in pricing procedure then also while doing the post good issue against the outbound delivery( move type-"641", moving average is getting picked up.
Can you please tell,where is the setting where we can make the system to consider manual given price while creating the stock transfer order instead of picking moving average price.
Its very Important requirement ,please Provide valuable Inputs else provide some alternative.
Thanks & Regards
Nitin Chhabra

Stock Transfer Order between Plants in the same Company Cpde are not relevant for pricing, as there is no billing. Billing only takes place between company codes. As same company code it would be like selling something to yourself - it doesn't make sense. The stock value in the receiving Plant depends on the price contol there. If standard price, then you must enter the price when creating the material or use material revaluation to change it. When you transfer the material from the issuing plant, the value there will be transferred. In case of standard price any difference is posted to stock transfer differences. If using MAP then the value will be transferred from the issuing Plant in full.
If you use costing with standard price in main plant, then it is possible that you can transfer the cost from the main plant to the second plant, by using special procurement key for costing.
Rgds
Richard

STO Stock Transfer Order with HU (Handling Units) - Error Hugeneral 319

Hello,
We implemented a Stock Transfer Order process with the following details:
MM side
- PO is type NB, supplier is F_8001;
- In table T001W, supplier F_8001 is assigned to plant 80GP;
- WERKS = 40TV and LGORT = 41P in all PO items;
- In each item, the shipping tab is filled with NLCC as delivery type and customer C_4000 (this customer corresponds to plant 40TV in table T001W). The sales area is also defined as the sales area to be used in the sales order that will be created in plant 80GP;
SD side
- Sales order is created automatically for customer C_4000;
- In plant 80GP we have a HU managed stloc (32P). In this stloc we have a HU with the exact contents of the sales order. This HU has X in the HU storage loc field;
- We created the outbound delivery and chose our HU. From this moment the HU storage loc field changed to D and the HU was assigned to the delivery;
Now for the problem:
When we click Post Goods Issue button, we get the following error for each item:
HUGENERAL 319 - HU item contains different data than the stock posting
The HU contents are exactly what we need to ship, so we do not understand this error. We need this HU to be transfered to stloc 41P in plant 40TV (this stloc is also HU managed). Any clues?
Thanks in advance,
Joã

Hi,
Have you checked your HU material and material to packed both having stock in Inventory.
Even check the table HUMSEG is correctly updated or not.
check this table correctly Hu assignd to you material and created materil document or not.
check for for material master clearly for both material like plant, storage location, batch etc..
Ask your MM consultant to check all entry is correct in material master and delivery or not.
Regards
Karthik.

Unable to do Down Payment request F-47 against Stock transfer order

Dear All,
Business create STO.
in the STO they entered few conditions for expenses.
now Business is trying to do down payment request ( F-47) against Stock transfer order ( STO ).
but they are getting error message
"no invoice expected for item 00001of purchsing doucment ( STO NO )"
pl. guide me on this
Thanks a lot
h shah

Hi,
Using T-code F-47 - Down payment request against raise to possible as follows.
a) Purchase Order Document
b) Production Order
c)PM Order
d)Service Order
e)Process Order
f)Internal Order
Down payment request is not possible against to raise StockTtransfer Order(STO) and display error message.
So, you have to choose the above list only.
Hope, it is useful for you.
Regards,
K.Rajendran

Set Up stock transfer order between storage location

Hi,
We are already using Inter company Stock transfer order.
Now we have found that it is possible to set up Inter company stock transfer order between two storage location.
Can i have some configuration steps. I have tried it but not working.
Thanks in Advance
Samir Bhatt

HI,
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
Regards,
Chetan.

Stock transfer order process

Hi Experts,
can anybody provide me the Configuration and Easy Access steps to be taken to set up the stock transfer order? Please help me as I need to configure this at the customer site.
Thanks in Advance.

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Reagrding Stock Transfer order single step

Hi sap gurus,
Could any body let me know with example of Transaction " stock tranfer order one step".
Thanking you

Hi,
STO Process (Within Company code without SD)
What is the process of creating the stock transfer order? W hat is the essential inputs of stock trans. order?
This is only within the comp. code (w/o SD)
351+101 MvT.
with SD
641+101
1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
2. Should have enough stock in supplying plant (1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant (1100).
4. Make it receiving plant as a customer in customization.
Create customer (xd01) & and define the shipping data for plants in both the plants.
Path: SPRO u2013> IMG u2013> MM u2013> Purchasing u2013> PO u2013> set up STO u2013> define shipping data
(1 by 1)
In Receiving plant (1100)
Customer num. 123345 (for ex.)
Sales org. yyy
Dist. Channel yy
Sales div. y
In Supplying plant (1000)
Customer num. -
(donu2019t fill)
Sales org. yyy
Dist. Channel yy
Sales div. y
5. Assign doc. Type is u201CNLu201D for intra company STO. If STO is inter company,
Assign doc. Type is u201CNLCCu201D.
Position doc type is u201CUBu201D
Enter supplying plant (1000) & doc type (NL) & checking rule (ex:01)
6. Assign doc. Type is u201CUBu201D to your plants. (PO)
Go for new entries
Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
7. Create a PO, choose the doc type is u2018UBu2019 & item cat. u2019Uu2019, Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide u201Cout bound delivery numu201D.
10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov. type 101.
11. See the stock overview in the receiving & supplying plants.
Regards,
Pardeep Malik

Urgent Condition Tab Missing In Stock Transfer Order

Similar Messages

Maybe you are looking for