Urgent . could you please explain/give solution clearly.

Have ZGDES table in 4.6 c and 4.7 E. I have to do changes in both the systems.
I have to add one field ( for writing comments ) with text of unlimited length ?
I mean is there a practical way to make this 'Comments' field more like an extra text/long text field that is unlimited or at least a few hundred characters long?
If you have done this Kindly help me out.
ZGDES is having table maintenance genereter….so , I have to create TMG for this table also after adding this field.
If you tell me, please tell me how to give bonus points also.
you help will be APPRECIATED.

Hi Sam,
1)Declare the new field of type <b>STRING</b>
2)Save and Activate it
3)<b>Regenerate</b> the Table Maintainence.
This should work fine for you.
Regards,
Arun Sambargi.

Similar Messages

  • Hi there, i have Q i have excel file it need to be block with password. Could you please explain how i make password protect to Excel document

    Hi there,
    i have Q i have excel file it need to be block with password. Could you please explain how i make password protect to Excel document
    Thanks

    On the File menu, click Save As.
    On the Tools menu, click General Options.
    Do either or both of the following:
    If you want users to enter a password before they can view the workbook, type a password in the Password to open box, and then click OK.
    If you want users to enter a password before they can save changes to the workbook, type a password in the Password to modify box.
    NOTE   Unlike passwords you specify in the Password to open box, passwords you specify in the Password to modify box are not encrypted. These passwords are only meant to give specific users permission to modify workbook data. For optimal password security, it's best to assign both passwords. An encrypted password to access the workbook, and one to provide specific users with permission to modify its content. IMPORTANT   Use strong passwords that combine uppercase and lowercase letters, numbers, and symbols. Weak passwords don't mix these elements. Strong password: Y6dh!et5. Weak password: House27. Use a strong password that you can remember so that you don't have to write it down.
    If you want to use a different encryption type, click Advanced, click the type you want in the Choose an encryption type list, and then click OK.
    If needed, specify the number of characters you want in the Choose a key length box.
    NOTE   Document property encryption is enabled by default for most encryption types and providers. It prevents unauthorized users from viewing summary and custom file properties (such as the author or any custom file information) in theProperties dialog box. When users right-click the password-protected file, and then click Properties, information won't be available on the Summary tab and Customtab. Authorized users, however, can open the file and view all file properties (Filemenu, Properties command). To disable document property encryption, clear theEncrypt document properties check box.
    Click OK.
    When prompted, retype your passwords to confirm them.
    Click Save.
    If prompted, click Yes to replace the existing workbook.
    NOTE   You can also secure a workbook with a password on the Security tab of the Options dialog box (Tools menu, Options command).

  • Could you please explain when we connect R/3 system to BW

    Hi,
    could you please explain when we connect R/3 system to BW
    1. Procedure
    2. SAP BW need to do anything
    3. Effort required by  SAP BW
    Regards,
    kranthi

    Hello Kranthi,
    When we need to make a conncetion between R/3 & BW , First logon to R/3 system , Go to T/code - SM59 .
    There u find connections . Select on ABAP and click on New
    Then Provide the description
    Go to technical settings tab :
    Provide load balancing : No
    if you know the server name : give it in the target host name
    or give the IP Address ;
    Then after that go to logon & Security Tab :
    provide the RFC user ID , Client & Password .
    And now check the connection by clicking on the connection test
    If it shows some 2mins ,like that then it is ok ...
    Otherwise then it is a problem ...
    repeat the same thing by giving the target as R/3 here .
    now go the RSA1 , select the source systems , create source systems
    Select BW source systems
    give the target system details , such as system no . System ID ,server name ..
    And also background user id & password for both the target systemm & source system .
    Now Select the created source system , context menu & Check the connection .
    This job is performed with the help of basis people , not only by BW team .
    This is maintaince is done for every system ( Dev , Qaulity & production seperately )
    Thanks
    PT
    Edited by: PT on Dec 9, 2008 11:17 AM

  • Could you please explain about the  chain and end chain and module

    hi experts
    could you please explain about the  chain and end chain and module keywords?

    Hi Naresh,
    Conditions for Multiple Screen Fields
    To ensure that one or more PAI modules are only called when several screen fields meet a particular condition, you must combine the calls in the flow logic to form a processing chain. You define processing chains as follows:
    CHAIN.
    ENDCHAIN.
    All flow logic statements between CHAIN and ENDCHAIN belong to a processing chain. The fields in the various FIELD statements are combined, and can be used in shared conditions.
    CHAIN.
    FIELD: <f1>, <f 2>,...
    MODULE <mod1> ON CHAIN-INPUT|CHAIN-REQUEST.
    FIELD: <g1>, <g 2>,...
    MODULE <mod2> ON CHAIN-INPUT|CHAIN-REQUEST.
    ENDCHAIN.
    The additions ON CHAIN-INPUT and ON CHAIN-REQUEST work like the additions ON INPUT and ON REQUEST that you use for individual fields. The exception is that the module is called whenever at least one of the fields listed in a preceding FIELD statement within the chain meets the condition. So <mod1> is called when one of the fields <fi> meets the condition. <mod2> is called when one of the fields <f i> or <g i> meets the condition.
    Within a processing chain, you can combine individual FIELD statements with a MODULE statement to set a condition for a single field within the chain:
    CHAIN.
    FIELD: <f1>, <f 2>,...
    FIELD <f> MODULE <mod1> ON INPUT|REQUEST|*-INPUT
    |CHAIN-INPUT|CHAIN-REQUEST.
    MODULE <mod2> ON CHAIN-INPUT|CHAIN-REQUEST.
    ENDCHAIN.
    The module <mod1> is called when screen field <f> meets the specified condition for individual fields. <mod2> is called when one of the fields <fi> or <f> meets the condition. If you use the addition ON CHAIN-INPUT or ON CHAIN-REQUEST with FIELD <f>, the condition also applies to the entire chain and module <mod1> and <mod2> are both called.
    In cases where you apply conditions to various combinations of screen fields, it is worth setting up a separate processing chain for each combination and calling different modules from within it.
    The functions of the FIELD statement for controlling data transport also apply when you use processing chains. Within a processing chain, screen fields are not transported until the FIELD statement. Processing chains also have another function for the FIELDS statements that they contain. This is described in the section on validity checks.
    Ex:
    PROCESS AFTER INPUT.
    MODULE CANCEL AT EXIT-COMMAND.
    CHAIN.
    FIELD: INPUT1, INPUT2.
    MODULE MODULE_1 ON CHAIN-INPUT.
    FIELD INPUT3 MODULE MODULE_* ON *-INPUT.
    MODULE MODULE_2 ON CHAIN-REQUEST.
    ENDCHAIN.
    FIELD INPUT1 MODULE C1 AT CURSOR-SELECTION.
    CHAIN.
    FIELD: INPUT2, INPUT3.
    MODULE C2 AT CURSOR-SELECTION.
    ENDCHAIN.
    MODULE CURSOR AT CURSOR-SELECTION.
    Regards,
    Sunil

  • Could you please explain how to work with Outlier Correction

    could you please explain how to work with Outlier Correction

    Hi sr,
    Actually an outlier correction is an historical value that lies the tolerance lane.
    the apo sys calculate this tolerance lane on the basis of the sigma factor.
    It then correct any historical value that lies outside the upper or lower band of this tolerance lane.
    So, that it corresponds to the calculated ex- post value for that point in time.
    this option is available in Master forecast profile /sapapo/mc96b in Univariate profile( control parameters) tab.
    If you have set the outlier correction indicator, then the sys first calculate an ex-post forecast with the selected forecasting techniques.
    In the next step, the sys calculates a tolerance threshold T.
    where T is calculated as T = sigma * MAD (Mean Absolute Deviation)
    Here the Sigma factor defines the width of the tolerance rangefor automatic outlier correction.
    it defines the permissible number of standard deviations.
    A small sigma factor means a low tolerance, and a large number of outliers that are detected and corrected.
    The default Sigma factor is 1.25.
    If you set the Sigma factor, SAP recommends that you set it betw 0.6 and 2.
    I hope this is helpful for you.
    Regards,
    Pullaiah

  • Hi Do we have tables for SAP BPC EPM Comments ? if we have what are they could you please explain some one.

    Hi Do we have tables for SAP BPC EPM Comments ? if we have what are they could you please explain some one.

    Hi Narahari,
    Yes, we have tables for SAP BPC EPM comments and it is stored in backend BW.
    Please follow the below steps to see it -
    1. Go to RSA1 and find the infoprovider name for the application/cube that contains the comments For example, the infoprovider name is /CPMB/VZIKG4O
    2.  Then Go to SE16 and enter the comment table name.  The comment tables are generated tables.  You can determine there name by using the following rules:
      a.  The table name always starts with '/1CPMB/'
      b.  The rest of the name is derived from the infoprovider name - it is the first two characters after the second '/' + the fourth, fifth and sixth characters + CMT (for comments) or CMTA (for archived comments). In my case the comments table name would be "/1CPMB/VZKG4CMT" and the archived comments table would be "/1CPMB/VZKG4CMTA".
    3.  Hit 'F7' or click the table contents button.
    4.  Enter the criteria for the comments you wish to export.
    Hope this helps.

  • My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.  I have tried re-installation but still have the same problem.  Could you please forward a solution to this problem.

    My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.
    I have tried re-installation but still have the same problem.
    Could you please forward a solution to this problem.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I can not add the warning before buying an app. Could you please explain how to add this warning

    Please tell me how to add the warning before purchasing an app?

    Hey klw67
    Thanks for the question. Are you referring to the prompt for your password? If so, this can be achieved by utilizing the Restrictions (parental controls) of the specific device. For information on setting up and using Restrictions, see this resource:
    iOS: Understanding Restrictions (parental controls)
    http://support.apple.com/kb/HT4213
    You can prevent access to specific content types:
    - You can also adjust the time necessary before a password is required to purchase content.
    Thanks,
    Matt M.

  • Apple could you please find a solution for flash videos on safari

    dear apple,
    apple i am really looking forward for looking up a solution for watching flash content on safari .
    best wishes
    TARIQ MOHAMED

    You are not talking to Apple here, you need to send them feedback via the official channels.
    http://www.apple.com/feedback
    Also, Adobe just announced that they are ceasing development on mobile flash for all devices, so there is no chance Flash will ever come to iOS.
    Mobile Flash is dead, it's all about HTML5.

  • Could you please provide a solution or an upgrade since I find "Modify Headers" being reported as incompatible with Firefox v3.6.12?

    After suffering a system crash, I re-installed Firefox 3.6.6 which was present with me and all the plug-ins that I needed.
    The automatic updater for Firefox then found the version 3.6.12 available for a download which I subsequently did.

    Tools > Addons > Extensions - right-click that extension and use the '''Find Update''' menu item, then restart Firefox

  • [HELP] Could you please give me a solution to BW reports of ECC purchasing

    Hey, guys,
      I want to do some customized spend analysis reports of MM purchasing.The purchasing data will be retrived from 2 source systems ( 1 is ECC 6.0 and the other is R/3 4.6c ) And these reports should be viewed by "commodity" , however, there is no commodity code maintained in material master data.
      So my solution is :
    1. to find a idle field in material master data to maintain this "commodity", this could be flexible for me, however, it's not easy to push other guys to do this. ( I don't have the authority to do the master data maintainence.)
    2. to maintain a mapping table in BW, and material and commodity(also description)should be the fields of this table. However, I don't think it's a good way. Because, this table is not easy to maintain and synchronized.
    <b>   Could you please give me any suggestion for this situation. Is there any good solution to my question? </b>
       Thanks a lot

    first things first .. if they want a report by commodity .. ask them to maintain it ..
    1. if you can make the guys maintain commodity in a idle field, you can as well make them enhance the material master and add a new field ... its upto the flexibility u have
    2. i dont think thats a bad idea.. but i would prefer somebody maintain the same mapping table in source system and ask them to RFC it to BI .. so that u can use it as a look up table ...

  • Could you please give me a solution for this

    Hi,
    I am doing BPC migration project from MS to SAP NW.In this,
    I added 20 Dimesion properties in the Entity dimension, It is not accepting 21st property in that Entity dimension.
    Could you please give me a solution for this at the earliest.
    Thanks and Regards
    Krishan
    Edited by: chinnikrishna on Aug 10, 2011 11:28 AM

    Hi Krishan,
    The length of property ID should not be more that 20 characters and the description has a limitation for 60 characters. Otherwise there is not limit as such to add properties.
    Hope this helps.
    Rgds,
    Poonam

  • HT1695 am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

    am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

    Is this your problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Otherwise:
    Does the iPod connect to other networks?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

    I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

    OS X can natively read NTFS of Windows, but not write to it.
    Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
    Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
    If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
    If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
    Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
    Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
    Bootcamp only allows Windows 7, that's it now.
    You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
    CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
    Good Luck

  • I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

    I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

Maybe you are looking for