URGENT - Critical SMS ERRORS

Hello everyone! I have a Nokia E71 with the latest firmware update. I recently did a firmware update and restored everything I had before the update.
Two problems though:
1) My SMS that I have received only show the numbers of the person who sent it (even though they are in my phone book).
2) The text messages are showing the WRONG DATE I received the message on my E71. For example, a text message I received 10 days ago shows as the date I restored the backup to my phone. However, on my Nokia PC Suite, the text messages have the RIGHT DATE AND TIME.
If anyone could please provide me a solution, that would be great. Please help, I am very sad over this.

This all problems are causing due to firmware bug. Wait for new firmware release.
If you like my post then give me "Kudos" star...

Similar Messages

A critical program error has occured while opening workbook

Dear friends,
A critical error has occured while opening workbook. The issue is that the same workbook is opening in some one machine but not in others.The following Dialog box is poping out when tried to open workbook:
"A critical program error has occured.The Program will now terminate.Please refer to trace for further information."
However,i did the full updation of service pack3 of MS Excel 2003 on my machine and the same version as on that particular machine(on which workbook is opening). The problem is still there.Please provide some solution.
Thankx a lot in advance!!!
regards,
Sandeep Singla

The machine where the workbook is opening has a GUI :-
Release : "710 Final Release"
File Version : 7100.2.7.1038
Build : 967944
Patch Level : 7
and the machine where the critical program error is coming has a GUI :-
Release : "710 Final Release"
File Version : 7100.2.8.1039
Build : 983952
Patch Level : 8
The Excel 2003 are similar in both the machines as the service pack3 has been installed in the machine where workbook was not opening.
Any help will be appreciated.
Thanks and Regards,
Sandeep Singla

Critical program error while opening some workbook

Hi all,
We are in BI 7 with suppoprt package 12 and GUi version 710.
Whenever iam trying to to open some workbooks system is showing the mesaage Critical programm error. I checked the trace file also but din t get anything . Th trace file is saying:
BExConnect.Trace3: 0
BExExcelTraceListener.AddTraceListener: Added a tracelistener for Version: 7100.0.461
BExConnect.constructor2: 23.59375
BExMenu.CreateSubMenu1: 0.15625
BExMenu.CreateSubMenu2: 3.75
ListSeparator: ,
openworkbook
GetSystemInformation
SUNI Const: 0
CommunicationFactory.GetSystemInformation (Setting Conn 1)): 0.15625
CommunicationFactory.GetSystemInformation (Setting Conn 2)): 0.15625
CommunicationFactory.GetSystemInformation (Setting init Propties)): 0.15625
CommunicationFactory.GetSystemInformation (SUNI.FUNCTION_EXISTS)): 0.625
RSR_XLS_RFCtrc: 4.0625
CommunicationFactory.GetSystemInformation (RSR_XLS_NET_INTERFACE)): 7.8125
CommunicationFactory.GetSystemInformation (XML Stuff)): 10.9375
CommunicationFactory.GetSystemInformation (Prop Stuff)): 10.9375
CommunicationFactory.GetSystemInformation (Version)): 10.9375
CommunicationFactory.ObtainSystemInformationandCheckVersion (GetSysInfo)): 10.9375
CommunicationFactory.ObtainSystemInformationandCheckVersion (CheckAfterLogin)): 0
CommunicationFactory.LogOnUsingComConnection (ObtainSystemInfo)): 10.9375
CommunicationFactory.LogOnUsingComConnection (MainConnectionChangedEvent)): 2.65625
CommunicationFactory.LogOn: 13.90625
RSR_XLS_RFCtrc: 0
BExThemes.LoadFromBackend: 2.8125
BExConnect.LogOn: 70.46875
OpenWorkbookGetWorkbookId
RSR_XLS_RFCtrc: 0
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
RSR_XLS_RFCtrc: 0
RSR_XLS_RFCtrc: 0.15625
RSR_XLS_RFCtrc: 0.3125
openworkbook
BExConnect.LogOn: 633331433736.094
OpenWorkbookGetWorkbookId
RSR_XLS_RFCtrc: 0
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
RSR_XLS_RFCtrc: 0
openworkbookparam
openworkbook with param
BExConnect.LogOn: 633331433790
OpenWorkbookGetWorkbookId
OpenWorkbookGetTheMimeAndStoreItOnTemp
RSR_XLS_RFCtrc: 1.5625
13/12/2007 11:49:41 AM----
System.ArgumentException: Item has already been added. Key in dictionary: 'WORKBOOK_MODE' Key being added: 'WORKBOOK_MODE'
   at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
   at System.Collections.Hashtable.Add(Object key, Object value)
   at com.sap.bi.et.analyzer.api.BExApplicationProperties.CreateFromDeSer(BExDeSer_Properties[] iPropties)
   at com.sap.bi.et.analyzer.api.BExApplication.CreateFromDeSer(BExDeSer_Page iPage)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication..ctor(String iWorkbookName)
Item has already been added. Key in dictionary: 'WORKBOOK_MODE' Key being added: 'WORKBOOK_MODE'
   at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
   at System.Collections.Hashtable.Add(Object key, Object value)
   at com.sap.bi.et.analyzer.api.BExApplicationProperties.CreateFromDeSer(BExDeSer_Properties[] iPropties)
   at com.sap.bi.et.analyzer.api.BExApplication.CreateFromDeSer(BExDeSer_Page iPage)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication..ctor(String iWorkbookName)
Can naybody help me in this regard as the same workbook is opening in other system..Points will be awarded for the helpful answers..
Thanks in advance..

Niyati,
That hotfix can run only to the 640, even we have the same problem over here. Actually you should not upgarde the front end patch if you want to install. But that hot fix might run or may not run, you may get issues later with the GUI..
All these probles will cause becoz of frontend patch... If you are at patch 27 then you need to unistall and come back to the same patch level as your colleague has... actually i dont know how to unistall that patch.. Or else try out with frontend patch 28...
Hope it helps..
Assign points if it helps
Gattu

Critical Kernel error while on windows partition, now neither mac or windows will boot help ?

Hi I was on my windows side of my mac when i got the blue-screen-of-death with something saying Critical Kernel Error, weird noises from the speakers and the macbook pro did a hard shut off.
Since then I can no longer boot into the mac or windows side (both are stuck infinitely loading). I ran disk utility on the mac side and I have an "Invalid Node Structure." Which disk utility cannot repair. I do have DiskWarrior on another mac to try and rebuild the mac partition through a firewire connection - i think that is the correct course of action ?
But does this mean my windows partition is likely gone or any idea what went on ? As I am terribly confused that while on my windows side I had an error that messsed up both partitions.
Or what to check for so this hopefully doesnt happen again if it is a hardware problem? My drive smart status is listed as "OK" and I cant seem to run the Apple Hardware test as upon attempting to get into it the laptop just shuts off while loading it, although I read somewhere the Apple Hardware test is no longer preloaded on macbook pros.
The system in question is a 15" macbook pro bought around July 2011.
Thank you,
Wes

Alright I have both my mac side and windows side repaired and functioning fine. Should I still be concerned ? Linc I know you are saying this is a drive malfunction but is there a way I can be sure ? I still cannot run AHT (restart, hold down D), and my laptop shipped with Lion installed so I believe it should run. It just boots into the mac side when I hold D..

A critical program error occured when running a workbook

Some end users get a critical program error occured when running a workbook when they want to make selections.
In the trace they get the following message
System.ArgumentException: Item has already been added. Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6" Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
This happens only on some PC clients !
Thanks for any help !
Ivan

Hi Vid,
Thanks for your suggestion.
I am using a different patch i.e.
BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
and it helps to solve my problem.
Cheers.

Critical SMS_NOTIFICATION_SERVER ERROR sccm 2012 R2 WITH SQL 2012 SP1

Environement
SCCM 2012 R2
SQL 2012 SP1
On the same server
In sccm console i have in Monitoring - System Status - Component Status
critical SMS_NOTIFICATION_SERVER ERROR
Here are the two error that keep popping up
ERROR 1016
Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in 60 minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Folowing message
ERROR 4951
Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install.
Refer to the BgbSetup.log, the bgbisapimsi.log, as well as the ConfigMgr Documentation and the Microsoft Knowledge Base for further information.
Here are the 2 logs
bgbsetuplog
<02/28/14 09:00:53> ====================================================================
<02/28/14 09:00:53> SMSBGB Setup Started....
<02/28/14 09:00:53> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:TCI-SCCMR2-LAV SMSBGB 0
<02/28/14 09:00:53> Installing Pre Reqs for SMSBGB
<02/28/14 09:00:53>         ======== Installing Pre Reqs for Role SMSBGB ========
<02/28/14 09:00:53> Found 1 Pre Reqs for Role SMSBGB
<02/28/14 09:00:53> Pre Req SqlNativeClient found.
<02/28/14 09:00:53> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<02/28/14 09:00:53> Pre Req SqlNativeClient is already installed. Skipping it.
<02/28/14 09:00:53>         ======== Completed Installation of Pre Reqs for Role SMSBGB ========
<02/28/14 09:00:53> Installing the SMSBGB
<02/28/14 09:00:53> Passed OS version check.
<02/28/14 09:00:53> IIS Service is installed.
<02/28/14 09:00:53> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<02/28/14 09:00:53> New SMSBGB is the same product code. This is a minor upgrade.
<02/28/14 09:00:53> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<02/28/14 09:00:53> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<02/28/14 09:01:01> bgbisapi.msi exited with return code: 0
<02/28/14 09:01:01> Installation was successful.
<02/28/14 09:01:01> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<02/28/14 09:01:04> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<02/28/14 09:01:04> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<02/28/14 09:01:07> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<02/28/14 09:01:07> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<02/28/14 09:01:07> Fatal MSI Error - bgbisapi.msi could not be install
bgpisapi.log
MSI (s) (00:60) [09:01:01:660]: Product: BGB http proxy -- Configuration completed successfully.
MSI (s) (00:60) [09:01:01:661]: Windows Installer reconfigured the product. Product Name: BGB http proxy. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (00:60) [09:01:01:665]: Deferring clean up of packages/files, if any exist
MSI (s) (00:60) [09:01:01:665]: MainEngineThread is returning 0
MSI (s) (00:04) [09:01:01:670]: RESTART MANAGER: Session closed.
MSI (s) (00:04) [09:01:01:670]: No System Restore sequence number for this installation.
=== Logging stopped: 2/28/2014 9:01:01 ===
MSI (s) (00:04) [09:01:01:674]: User policy value 'DisableRollback' is 0
MSI (s) (00:04) [09:01:01:674]: Machine policy value 'DisableRollback' is 0
MSI (s) (00:04) [09:01:01:674]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:04) [09:01:01:675]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:04) [09:01:01:677]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (00:04) [09:01:01:678]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:04) [09:01:01:678]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (00:04) [09:01:01:679]: Destroying RemoteAPI object.
MSI (s) (00:B8) [09:01:01:679]: Custom Action Manager thread ending.
MSI (c) (3C:B8) [09:01:01:686]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (3C:B8) [09:01:01:686]: MainEngineThread is returning 0
MSI (c) (3C:B0) [09:01:01:690]: RESTART MANAGER: Session closed.
=== Verbose logging stopped: 2/28/2014 9:01:01 ===

Problem not fixed SORRY GUY'S
Environement
1 SERVER
WINDOWS SERVER 2012 R2
SQL SERVER 2012 SP1
SCCM 2012 R2
ERROR in system center
Message ID 1016
Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in 60 minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Message ID
4951
Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install.
Refer to the BgbSetup.log, the bgbisapimsi.log, as well as the ConfigMgr Documentation and the Microsoft Knowledge Base for further information.
BGPSETUP.LOG
<03/05/14 09:49:33> ====================================================================
<03/05/14 09:49:33> SMSBGB Setup Started....
<03/05/14 09:49:33> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:TCI-SCCMR2-LAV SMSBGB 0
<03/05/14 09:49:33> Installing Pre Reqs for SMSBGB
<03/05/14 09:49:33>         ======== Installing Pre Reqs for Role SMSBGB ========
<03/05/14 09:49:33> Found 1 Pre Reqs for Role SMSBGB
<03/05/14 09:49:33> Pre Req SqlNativeClient found.
<03/05/14 09:49:33> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<03/05/14 09:49:33> Pre Req SqlNativeClient is already installed. Skipping it.
<03/05/14 09:49:33>         ======== Completed Installation of Pre Reqs for Role SMSBGB ========
<03/05/14 09:49:33> Installing the SMSBGB
<03/05/14 09:49:33> Passed OS version check.
<03/05/14 09:49:33> IIS Service is installed.
<03/05/14 09:49:33> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<03/05/14 09:49:33> New SMSBGB is the same product code. This is a minor upgrade.
<03/05/14 09:49:33> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<03/05/14 09:49:33> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<03/05/14 09:49:41> bgbisapi.msi exited with return code: 0
<03/05/14 09:49:41> Installation was successful.
<03/05/14 09:49:41> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/05/14 09:49:43> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/05/14 09:49:43> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/05/14 09:49:45> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/05/14 09:49:45> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<03/05/14 09:49:45> Fatal MSI Error - bgbisapi.msi could not be installed.
<03/05/14 09:49:45> ~RoleSetup().
BGBISAPI.LOG
=== Verbose logging started: 3/5/2014 9:49:33 Build type: SHIP UNICODE 5.00.9600.00 Calling process: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
MSI (c) (08:C0) [09:49:33:974]: Resetting cached policy values
MSI (c) (08:C0) [09:49:33:974]: Machine policy value 'Debug' is 0
MSI (c) (08:C0) [09:49:33:974]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (08:C0) [09:49:33:974]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (08:C0) [09:49:33:974]: Grabbed execution mutex.
MSI (c) (08:C0) [09:49:34:021]: Cloaking enabled.
MSI (c) (08:C0) [09:49:34:021]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (08:C0) [09:49:34:025]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (C4:E4) [09:49:34:039]: Running installation inside multi-package transaction D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
MSI (s) (C4:E4) [09:49:34:039]: Grabbed execution mutex.
MSI (s) (C4:E8) [09:49:34:045]: Resetting cached policy values
MSI (s) (C4:E8) [09:49:34:045]: Machine policy value 'Debug' is 0
MSI (s) (C4:E8) [09:49:34:045]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (C4:E8) [09:49:34:047]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (C4:E8) [09:49:34:053]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (C4:E8) [09:49:34:057]: SRSetRestorePoint skipped for this transaction.
MSI (s) (C4:E8) [09:49:34:058]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (C4:E8) [09:49:34:060]: File will have security applied from OpCode.
MSI (s) (C4:E8) [09:49:34:065]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi' against software restriction policy
MSI (s) (C4:E8) [09:49:34:065]: SOFTWARE RESTRICTION POLICY: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi has a digital signature
MSI (s) (C4:E8) [09:49:34:067]: SOFTWARE RESTRICTION POLICY: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi is permitted to run because the user token authorizes execution (system or service token).
MSI (s) (C4:E8) [09:49:34:067]: MSCOREE not loaded loading copy from system32
MSI (s) (C4:E8) [09:49:34:077]: End dialog not enabled
MSI (s) (C4:E8) [09:49:34:077]: Original package ==> D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
MSI (s) (C4:E8) [09:49:34:077]: Package we're running from ==> C:\Windows\Installer\3897f9.msi
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall Flags override found.
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall VersionNT override found.
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (s) (C4:E8) [09:49:34:081]: APPCOMPAT: looking for appcompat database entry with ProductCode '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'.
MSI (s) (C4:E8) [09:49:34:081]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (C4:E8) [09:49:34:094]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisablePatch' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (C4:E8) [09:49:34:095]: APPCOMPAT: looking for appcompat database entry with ProductCode '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'.
MSI (s) (C4:E8) [09:49:34:095]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (C4:E8) [09:49:34:096]: Transforms are not secure.
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log'.
MSI (s) (C4:E8) [09:49:34:096]: Command Line: REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR=D:\Program Files\SMS_CCM CCMSERVERDATAROOT=D:\Program Files\Microsoft Configuration Manager USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE
SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 CURRENTDIRECTORY=D:\Program Files\Microsoft Configuration Manager\bin\x64 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=5384
MSI (s) (C4:E8) [09:49:34:096]: Product Code passed to Engine.Initialize:           '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product Code from property table before transforms: '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product Code from property table after transforms: '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product registered: entering maintenance mode
MSI (s) (C4:E8) [09:49:34:096]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (C4:E8) [09:49:34:096]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is admin assigned: LocalSystem owns the publish key.
MSI (s) (C4:E8) [09:49:34:096]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is managed.
MSI (s) (C4:E8) [09:49:34:096]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:096]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (C4:E8) [09:49:34:096]: Specifed source is already in a list.
MSI (s) (C4:E8) [09:49:34:096]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (C4:E8) [09:49:34:096]: Machine policy value 'DisableBrowse' is 0
MSI (s) (C4:E8) [09:49:34:096]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (s) (C4:E8) [09:49:34:096]: Adding new sources is allowed.
MSI (s) (C4:E8) [09:49:34:097]: Package name retrieved from configuration data: 'bgbisapi.msi'
MSI (s) (C4:E8) [09:49:34:099]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (C4:E8) [09:49:34:099]: Machine policy value 'DisableMsi' is 1
MSI (s) (C4:E8) [09:49:34:099]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (C4:E8) [09:49:34:099]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (C4:E8) [09:49:34:099]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is admin assigned: LocalSystem owns the publish key.
MSI (s) (C4:E8) [09:49:34:099]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is managed.
MSI (s) (C4:E8) [09:49:34:099]: Running product '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}' with elevated privileges: Product is assigned.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding REINSTALL property. Its value is 'ALL'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding REINSTALLMODE property. Its value is 'vmaus'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMINSTALLDIR property. Its value is 'D:\Program Files\SMS_CCM'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMSERVERDATAROOT property. Its value is 'D:\Program Files\Microsoft Configuration Manager'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSPORTS property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSPORTS property. Its value is '80'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSSSLPORTS property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSSSLPORTS property. Its value is '443'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSSSL property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSSSLSTATE property. Its value is '0'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMENABLELOGGING property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGLEVEL property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGMAXSIZE property. Its value is '1000000'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGMAXHISTORY property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'D:\Program Files\Microsoft Configuration Manager\bin\x64'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '5384'.
MSI (s) (C4:E8) [09:49:34:100]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '1ea81ab83bbb7c48a58c04b46f112051'.
MSI (s) (C4:E8) [09:49:34:104]: RESTART MANAGER: Session opened.
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:104]: TRANSFORMS property is now:
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (s) (C4:E8) [09:49:34:106]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming
MSI (s) (C4:E8) [09:49:34:106]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Favorites
MSI (s) (C4:E8) [09:49:34:108]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (C4:E8) [09:49:34:109]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Documents
MSI (s) (C4:E8) [09:49:34:109]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (C4:E8) [09:49:34:110]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (C4:E8) [09:49:34:112]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Local
MSI (s) (C4:E8) [09:49:34:114]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Pictures
MSI (s) (C4:E8) [09:49:34:124]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (C4:E8) [09:49:34:128]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (C4:E8) [09:49:34:129]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (C4:E8) [09:49:34:131]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (C4:E8) [09:49:34:132]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (C4:E8) [09:49:34:135]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (C4:E8) [09:49:34:137]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (C4:E8) [09:49:34:138]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (C4:E8) [09:49:34:139]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (C4:E8) [09:49:34:141]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Desktop
MSI (s) (C4:E8) [09:49:34:144]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (C4:E8) [09:49:34:144]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (C4:E8) [09:49:34:144]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (C4:E8) [09:49:34:156]: MSI_LUA: Setting AdminUser property to 1 because the product is already installed managed and per-machine
MSI (s) (C4:E8) [09:49:34:156]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:156]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (C4:E8) [09:49:34:156]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding Installed property. Its value is '00:00:00'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\3897f9.msi'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi'.
MSI (s) (C4:E8) [09:49:34:156]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (C4:E8) [09:49:34:156]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (C4:E8) [09:49:34:156]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (C4:E8) [09:49:34:159]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (C4:E8) [09:49:34:159]: Machine policy value 'DisableRollback' is 0
MSI (s) (C4:E8) [09:49:34:159]: User policy value 'DisableRollback' is 0
MSI (s) (C4:E8) [09:49:34:159]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
MSI (s) (C4:E8) [09:49:34:159]: PROPERTY CHANGE: Adding QFEUpgrade property. Its value is '1'.
=== Logging started: 3/5/2014 9:49:34 ===
MSI (s) (C4:E8) [09:49:34:161]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (C4:E8) [09:49:34:161]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:161]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (C4:E8) [09:49:34:163]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (C4:E8) [09:49:34:163]: Doing action: INSTALL
Action start 9:49:34: INSTALL.
MSI (s) (C4:E8) [09:49:34:165]: Running ExecuteSequence
MSI (s) (C4:E8) [09:49:34:165]: Doing action: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61
MSI (s) (C4:E8) [09:49:34:166]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI (s) (C4:E8) [09:49:34:167]: PROPERTY CHANGE: Adding SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 9:49:34: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
MSI (s) (C4:E8) [09:49:34:167]: Doing action: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61
Action ended 9:49:34: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
MSI (s) (C4:E8) [09:49:34:169]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI

I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

Forgot to mention I live in Peru Southamerica, the cell provider is Claro (America Moviles).

SMS error 3 on nearly every text. Possibly due to other company towers?

Carrier: South Central Communications
Blackberry 8530
v5.0.0.395 (platform 4.2.0.167) <<< I think that's what I'm supposed to be posting. I've never done this before
How do I find free space? The only apps I've installed are MSN messenger & Facebook, and neither one has ever worked for me.
I've removed the battery & done other resets, internet cache clean etc.
I would like to start by saying I know this question has been asked, however, none of the threads I've found by searching have any information that I found at all useful. If I missed one, please, point it out.
Wednesday, January 5, when I got home from work (around 6:30pm local time), my texts stopped sending reliably. I get the SMS error 3 on nearly every one, and I stopped receiving texts as well. I can make calls, but they tend to drop.
When I went upstairs (lower level of my home is half underground, windows @ ground level), my texts started sending more reliably. I assumed the usually poor signal in the lower level was just worse than usual. I have gotten the error message sporadically in the past. I was not able to send or receive any texts until the next morning, when they started working again almost as usual. I had my usual 0-2 bars displaying throughout this, did not think to check signal strength in dbm.
Thursday evening (last night) as the evening went on, my texts started going through less and less frequently. Around 11pm local time, they just stopped altogether again. Going upstairs did NOT help at this point. This morning, I am able to send and receive occasional texts, though the majority of the time I still get the error.
My signal strength was -106dbm when I first started looking for answers (about an hour ago) and is -91 now, all texts still failing. I'm @ work today and my signal is usually crappy here, except when I'm roaming, but I'm usually able to text just fine.
I also occasionally notice I'm roaming when I'm home in the lower level.
I know that at the first of this year, AT&T was taking over the local towers that once belonged to AllTel. Could this switchover be the cause of my diminished capability? I really hope not, I hope it's something I can fix myself. On the other hand, if it's just because they're working on the towers and I have such poor signal that I fail to get any signal at all when they're working on it, it will likely resolve when they're done, correct?
Please offer any information that might be relevant.
I'll gladly read any article or forum I'm directed to, there's just such an abundance of information available I do not know where to begin. I am a very beginning user. I was supposed to have my data plan hooked up almost a month ago but I keep forgetting to go back in. They had to get some data key to install on my phone so that it would work.
I've only had this phone a couple months and this is the first time I've ever really had an issue with it, besides my calls not going through because it was set to the wrong country code initially.
Thank you for your time.
EDIT: Just set my phone to "home only" We'll see if that nixes the problem If it does, I can just blame AT&T

tonimarieeubank wrote:
My country code for SMS and Facebook is set on
Canada and should be USA. When I try to save as USA it automatically changes back to Canada. This has become a problem using YouTube. How can Country Code be reset.
Please refrain from hi-jacking another individuals thread for issues totally irrelevant to the OP's issue. This is considered rude and unacceptable.
Please create a new thread, in the forum appropriate to your model telephone, for the issue you're experiencing. You'll stand a much better chance of getting an answer that will resolve your issue.
"Cats may taste like chicken, but they have more bones than rabbits."
Blackberry 101
Tips & Tricks
Videos to learn from on youtube

A critical program error has occurred. BEx Analyzer. Cannot find trace file

I have now spent about 20 hours trying to resolve this issue. I receive the following error message when attempting to open any BEx Query: u201CA critical program error has occurred. The program will now terminate. Please refer to the trace for further information()u201D. Iu2019ve provided a video example of the scenario (couple minutes long): http://www.altnetwork.net/misc/Analyzer%20Critical%20Error.html
I cannot find the trace file in the standard C:\DOCUME1\BaldwiJE\LOCALS1\Temp\BexAnalyzerTrace.txt path. I cannot set/change the path/name of the trace file because the Trace File Name text box is grayed out (disabled) in BEx Analyzer > Global Options (see the above flash video link). I know that I am using the same Business Explorer and GUI build as my colleagues and I am able to login with my ID on their machines and not receive an error. We are using SAP BW 7.01 and I am using Excel 2007. I have entirely reinstalled Microsoft Excel, and the SAP Frontend including Business Explorer and SAP GUI. Iu2019ve monitored using both windows process monitor and windows process explorer but nothing is readily apparent as an issue (glad to share the process information if someone thinks it might help). No relevant event logs in the Windows event viewer.
Per the sapbexc.xla file, my system configuration is as follows:
Computer Name:      DEN-SSI-SYS-L61
File Location:      C:\DOCUME1\BaldwiJE\LOCALS1\Temp\sapBEX_PC_0614_103147.xls
Check done on:      6/14/2011   10:31:47 AM
Excel Version:      Excel 2007 (12.0.6535.5002)
Windows Version:      Windows 2000 (2195) Theme: %SystemRoot%\resources\Themes\Windows Classic.theme
Default Browser:      Internet Explorer (7.0.6000.17093)
SAP GUI:      720 Patch 1

Resolved! It actually seemed to be related to my windows profile. I notice that if a co-worker logged into windows on my machine that he was able to run the same BEx queries that I couldn't. I renamed my profile folder at c:\documents and settings\<myaccountname> to ...<myaccountname.bak>. I did this using a local administrator account on my computer. Then I logged back in to windows using my AD credentials. A new profile was created and then I was able to use BEx Analyzer again.
I also went back and tried to reload everything from my .bak profile into the newly created folder under documents and settings and hoped that I could isolate what specifically was causing the issue. However, even after moving everything over to my newly created profile I could not get the error to generate again. Sorry.
Highly recommend to anyone with the same issue that you confirm that a new profile works by a) having someone else login to your computer who has not already logged in before b) if that works, replace your c:\documents and settings\<myaccountname> folder.
Thanks to all who offered support.
Jerimiah

MSExchangeTransport critical storage error and recovery

Hi All,
Yesterday, I received the following error on one of my Hub Transport servers and I'm not sure if there is any action I need to take from this point:
"MSExchangeTransport has detected a critical storage error and has taken an automated recovery action.
This recovery action will not be repeated until the target folders are renamed or deleted. Directory path:D:\Transport Queue is moved to directory path:D:\Transport Queue\Queue.old, and directory path:E:\Tranport Queue Logs is moved to directory path:E:\Tranport
Queue Logs\Queue.log.old."
At this time, I also received a few alerts that Forefront had timed out while scanning some messages and that resources on the machine were limited.
Did I lose any data when this automated recovery occured? What does the message mean by: "This recovery action will not be repeated until the target folders are renamed or deleted"
What is considered the Target folder? The "old" location or the new location? I am currently running Exchange 2010 SP1 RU2.
Thanks for your thoughts!

Hi
I just find this eventid – 17102 relevant to this.
If the Queue.old directory already exists and a recovery is attempted then the following error is reported in the Windows Application log:
EventID: 17102
Description: MSExchangeTransport has detected a critical storage error and has taken an automated recovery action.
This recovery action will not be repeated until the target folders are renamed or deleted. %2 Where %1 is the database instance name, %2 is a list of the path changes
To resolve this issue simply delete or rename the contents of the Queue.old directory and restart the MSExchangeTransport service. Please finish recovery process. I can’t say whether you lose data.
Please check it by yourself. But I don’t know why you meet this kind of error.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

"Critical program error" in BEx Analyzer due to missing BExCompression

Hello. I saw several posts with a "Critical program error" message in new BEx Analyzer 7.0 when try to run query ir workbook, but have not seen any answers to them.
When I look into the trace file BexAnalyzerTrace_<session_id>.txt (attached) in my temp directory, I see following:
System.IO.FileNotFoundException: File or assembly name BExCompression, or one of its dependencies, was not found.
File name: "BExCompression"
at com.sap.bi.et.analyzer.api.BExApplication.DeSerializeApplication(String iString)
at com.sap.bi.et.analyzer.addin.BExExcelApplication..ctor(String iWorkbookName)
But I cannot find any further reference to BExCompression.
Thanks!
Vitaliy

Hi prakash,
we have installed the SAP GUI 7.10 with patch 5 and all the other mandatory components. while working in the query designer for sometime we used to get message " critical program error occured program needs to close" , we still cant figure out what the reason for this. this keep on occuring even if a new session is open.
please advise us what we need to do and if you have any installation guide for this i appreciate if you can share with us.
mail to : [email protected]
thanking you.

Critical object error in benefits

Hi,
I am getting critical object error when i try to enroll an employee. Anybody provide me solution to ovecome this prooblem.

Hi Anand,
I tried using dependent/beneficiary and RLPGR but it did not work. Would this not be used to control eligibility in the dependents/beneficiary tabs.
What the client wants is to control Employee eligibility to the plan. If spouse is not present then EE must not be eligible for spouse life plan. How would this be achieved through standard customizing without using PBEN0006 and ABAP coding.
Thanks
Sumeet
Edited by: SUMEET MEHTA on May 20, 2008 8:53 PM

[Solved] certificate contains unknown critical extension error firefox 5

Secure connection failed
An error occurred during a connection to an internal website
Certificate contains unknown critical extension
(Error code: sec_error_unknown_critical_extension)

I imported the root chain for my internal CAs into FireFox and this fixed the problem.
Tools->Options->Advanced->View Certificates->Import

A critical program error has ocurred in workbook after modif structure

Dear all,
I have a Excel Workbook with one query. This query has a structure. I have exchanged a structure for other one. From this moment when I try to modify the workbook or run it, the system returns next message: "A critical program error has ocurred, The program will now terminate. Please refer to the trace for further information".
Does anyone any idea about this issue?
Thanks in advance.
Sebastian

hi,
When I have clicked "design mode" system returns the same error.
Sebastian.

Critical program error in BEx designer when open the workbook

problem is coming related to Workbook.when i m opening the workbook then busiess explorer giving the error messgae i.e * A critical program error has occured. The program will now terminare.please refer to the trace for further information * kindly please provide the best solution for this problems.

hello , I got the same error while opening a workbook, and I found that this is happening coz I made some changes in Query structure contained into workbook.
So when you are opening and inserting the input variable do following things:
1.Open the workbook and insert the variable, but do not click "OK" just click on "CANCEL",
and your Workbook will display without data .
2.Now go to "Design Mode" reinsert the query by refreshing dataprovider(data analysis grid), and do the changes if you required and exit design mode,
3. Save workbook and now insert the variable values and check the work book will work without any error.
Thanks Hope it will help, coz it helped me.

URGENT - Critical SMS ERRORS

Similar Messages

Maybe you are looking for