Urgent: Custom font style not appearing in PDF output only

Hi,
For a customer, I received customer specific font styles(ttf font files) which I installed on my machine and then copied those files in Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts as well as in JRE/lib/fonts. Then I created a template in word and font there appears as custom font.
Now I am getting that font style in all output formats(rtf,ppt,excel) except the PDF output. I am using Oracle BI Publisher desktop alone. Not sure what I missed because of which text font is not changing in PDF version only. I checked the PDF properties and there also custom font is not getting mapped.
Thanks in advance.

Here is the link that describes how to set up the font mapping for PDF output: Look for "Font Mappings (for PDF output)"
BI Publisher Demo Library</title><meta name="Title" content="BI Publisher Demo Library">…http://www.oracle.com/technetwork/middleware/bi-publisher/learnmore/demo-library-toc-173301.html
Thanks,
Bipuser

Similar Messages

  • Calibri Font does not appear in pdf docs when viewed in Preview

    When I open a pdf file created on a PC the Calibri Font does not appear when the doc is opened in Preview. It does not print also.
    Do I have to install a font into Preview?
    How / Where do I do this?

    Hi and welcome to Discussions,
    maybe this can help you http://www.labnol.org/software/tutorials/install-fonts-mac/1679/
    Regards
    Stefan

  • Font not appearing on PDF Output

    Hi,
    We are creating a XSL-FO report in Oracle Applications R12 which uses a special font. I installed the font using XML Publisher Administrator and I can see the font when I click on Preview on the template. But when the report is run from Applications, the same font does not appear. I will really apreciate if anyone can provide a solution to me for this.
    Thanks
    Regards,
    Abhishek

    Hi Abhishek
    When you say XSLFO template do you mean an RTF template or an XSLFO template?
    Where are you previewing the template successfully and to what frmat?
    Regards
    Tim
    http://blogs.oracle.com/xmlpublisher

  • Page numbers not appearing in PDF output past a certain point

    Hi.  I have a very large book layout in Aperture (> 300 pages) which I output to a PDF file (using the Print button followed by selecting PDF).  I have successfully done this many times in the past, but there have occasionally been times when Aperture's output just stops including page numbers past a certain point.  I think what it's doing is deciding on white page numbers for the rest of the book, which doesn't work so well when the background is white.  (I can see this because there are occasional pages which are full bleed, and the page numbers appear in white on those pages).
    Has anyone else come across this?  I have seen this problem for years (Aperture 1, Aperture 2).  The solution seems to be to carefully modify the page layout so that no elements impinge on the location of the page number.  But doing this does not always solve the problem.  Just this morning I duplicated a page, changed its content, then output and... the page numbers just stopped in the output 30 pages *after* this page.  I just changed the page to move a text element up, hoping that this would solve the problem, and now... page numbers stop at page 263 instead of page 98.
    This is a very bizarre and annoying bug.  Extremely annoying.  I am not going to print a book which has page numbers in only the first half or 3/4 of the book.  But if there is no workaround, and Apple seems not to have noticed the problem, I could be stuck.
    Has anyone else seen this?  Any suggestions?  How can I report the bug to Apple?  I can't very well give them the output as an example, as it's about 800 MB.

    Hi leonieDF.  Thanks for your reply!  I didn't know about the "Provide Aperture Feedback" link.
    Alas the Theme is a custom one, it's 9"x11.5" so that the result is 8.5x11" after chopping off 1/4" from all sides.  (The printer does "full bleed" with 1/4" margins).  I originally created it by hand for Aperture 1.5, by simply copying one of the themes and adjusting the dimensions.  (Custom themes weren't possible until Aperture 2, if I remember correctly).  Perhaps that's the source of the issue.  Though I'm not sure how...
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
        <key>pageNumberMargin</key> <string>{4.5,0.35}</string>
        <key>bottomMargin</key>     <string>0.6</string>
        <key>insideMargin</key>     <string>0.6875</string>
        <key>horizontalSpacing</key>    <string>0.05</string>
        <key>verticalSpacing</key>  <string>0.05</string>
        <key>size</key>         <string>(9.00,11.50)</string>
        <key>backSoftcover</key>
        <string>01_BackSoftcover</string>
        <key>defaultTextStyle</key>     <string>Baskerville/14/BlackBackground</string>
        <key>disableFrameScaleAndRotation</key>
        <true/>
        <key>frontSoftcover</key>
        <string>01_FrontSoftcover</string>
        <key>indexPages</key>
        <array/>
        <key>leadingPages</key>
        <array>
        </array>
        <key>repeatingPages</key>
        <array>
            <string>OnePageBleedLayout</string>
            <string>1UpLayout</string>
            <string>1Up2UpLayout</string>
            <string>2UpLayout</string>
            <string>1UpLayout</string>
            <string>OnePageBleedLayout</string>
            <string>1UpLayout</string>
            <string>1UpLayout</string>
            <string>4UpLayout</string>
            <string>5AcrossArrayLayout</string>
            <string>6AcrossArrayLayout</string>
            <string>TwoPageBleedLayout</string>
            <string>2Up1UpLayout</string>
            <string>1UpLayout</string>
        </array>
        <key>trailingPages</key>
        <array/>
        <key>type</key>
        <string>Custom</string>
        <key>version</key>
        <integer>1</integer>
    </dict>
    </plist>
    (Standard themes are in /Applications/Aperture.app/Contents/Resources/Book Themes, custom ones in ~//Library/Application Support/Aperture/Book Themes )

  • Some font changes not displaying in PDF output

    Hello,
    I have Developer 2000 R 2.1 on my workstation and I produced a report from an Oracle table in PDF format. It displays different font weights, styles and colors (black or red) depending on values in a particular column. We have Oracle 8.0.5.2.1 and Reports30.
    The PDF report is perfect when it is displayed through the 'Live Previewer' or displayed using 'PDF' under 'Web Preview'. After I send my 'REPORT.rtf' to the server and compile using 'conv.sh', I get a 'REPORT.rep'. When I try to display the PDF report from a web page, using 'REPORT.rep', the some font changes are missing. No italics, no bold in some instances. It does show 'red', but not in all the correct places.
    What am I doing wrong?
    Thank you very much for any assistance.
    Paul

    Hi,
    the PO Output for Communication does not use the $OA_MEDIA variable so you have to provide the full path to your images, example url:{translate(concat('/d01/oracle/prodcomn/java/oracle/apps/media/',BILL_TO_LOGO),' ','')}
    Hope this helps as it works for us.
    Regards,
    Imtiyaz

  • Custom menu item not appearing in HTML5 Output

    I'm trying to add a custom menu item to the top right of a project, it shows up fine in the flash output of a published SCORM file, but it's non-existent in the HTML5 output.
    Has anyone experienced this issue, or have any suggestions for a solution?
    Thanks in advance for any help you can provide!

    I did it through the Skin Editor in Captivate, it is not an external flash menu...I wouldn't expect it to convert flash to html5.  Through the skin editor you can add extra buttons, in the same place you can move the table of contents button, to the "top right".  The problem is, the custom menu items won't even show the text where the link should be in html5, nothing... only when published to flash.

  • I have created a book in ibooks author with a custom font when previewing on the ipad the special characters within the font do not appear?

    I have created a book in ibooks author with a custom font when previewing on the ipad the special characters within the font do not appear?

    'custom' font sounds like you may be working with a font that is unsupported on iOS/iPad.
    Supported fonts are found in the pull-down font menu in the toolbar. Authors are obligated (mostly) to stick to that list.

  • Word styles not appearing in Print Document Appearance dialog

    My custom list styles in Style Mapping.dot are not appearing in the Print Document Appearance dialog when I try to map CSS styles to Word styles.
    The styles do appear in the template when I open it in Word. They appear in the styles task pane whether I select "In current document" or "In use" in the Style Pane Options dialog in Word. The styles have the same name (such as "Bullet" or "Number") in Word as the CSS styles in RoboHelp.
    I tried saving Style Mapping.dot as .dotx, thinking that RoboHelp 8 might work better with the current template type, but no help. I tried adding the template to the same folder as the Normal.dotm template is in and opening it there. No improvement.
    Oddly, the built-in Word styles List, List 2, & etc and List Continue and its series appear in the Robo dialog, but the styles List Bullet and others in that series do not appear.
    I suppose I could modify the list styles that do appear in Robo and map them to my CSS list styles, but that feels a bit like a desperate kluge.
    Does anyone know what might be wrong, either with my Word template or with Robo, that might be causing what seem to be perfectly good Word styles to not present themselves for mapping?
    Thanks again,
    John

    Peter,
    I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
    Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
    Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
    Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
    Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
    John
    From: Peter Grainge [email protected]
    Sent: Thursday, October 13, 2011 8:47 AM
    To: John Dawson
    Subject: Word styles not appearing in Print Document Appearance dialog
    Re: Word styles not appearing in Print Document Appearance dialog
    created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

  • Some fonts do not appear in InDesign

    Some fonts do not appear in InDesign although they can be used in Word, Pagemaker and show in Adobe Typemanager.

    Can you name one?
    These are the most common causes of people complaining "My fonts don't appear":
    (a) Smart name sorting. "New Century Schoolbook" sorts under "C", not "N". "Adobe Garamond" sorts under "G". (I call this 'smart' sorting because apparently it isn't the same as, ehm, dumb sorting. However, I've never read a good description of its sort parameters.)
    (b) Word and PageMaker (but not ATM) allow the use of fake fonts: bold, italics and bold+italics are produced by horribly deforming your base font. If you want a bold font in InDesign, use the designed one. If there isn't one designed ... the designer probably had good reasons not to make one. (It's still possible to create faux-bold and faux-italics in InDesign but the program leaves that decision to you).
    (c) Smart Script sorting. InDesign groups its fonts per supported script. Latin fonts are at the top (a slightly self-centric choice), then come groups of fonts for Hebrew, Arabic, Thai, Chinese, Japanese, etc. etc. A font like Gisha contains Hebrew characters and thus appears in the Hebrew group.
    (d) More than one font file with the same font name (internally). ID gets mightily confuzed if it encounters a file "times.ttf", font name "Times Roman", in one folder, and "tr_____.pfb", font name "Times Roman", in another folder. You can't really blaim it, though.

  • Custom item does not appear on Hotsync Menu

    I have a Sprint Treo 700p.  My work email was converted to Outlook from GroupWise.  I am able to sync successfully, but received a message about changing profiles and conduits.  I tried to do this by clicking the Hotsync icon in system tray.  The menu that appeared only had three items (Settings, Install, Exit).  The CUSTOM item does not appear.  I am using Hotsync Manager 7.0.2.  How can I get back the CUSTOM menu item?
    Thanks in Advance,
    Corey
    Post relates to: Treo 700p (Sprint)

    Those Hotsync options are what display on Palm Desktop 6.2.2, not prior versions 4.x.
    To get to your Hotsync settings, click the Hotsync icon, and select Settings.  Then click Applications. Select the conduit you wish to change, and click Configure.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Text from text module is not appearing in smartform output

    Hi Experts,
    We are using text modules in one of our smartform to print the sender text . The name of this text module is being dynamically determined during the execution and is coming correctly but still the the text inside the text module is not appearing in the output. We checked one more similar form which is working on the similar logic but calling a different text module , there it is working perfectly. I have tried all the possibilties like changing the window size, changing the fonts and other parameters of the text module but still its not appearing . This seems to be something unusual as in both the smartforms(one with text appearing from module and one without the text) the logic is exactly similar for getting the text module name. The name is getting determined in both the cases correctly and the text modules are also maintained in same manner for both these forms but text is appearing on one and not on other.
    Kindly help if any one of you have also faced similar issue.
    Regards

    Hi Priyank,
    There could be various reasons....
    Wrong language for example
    An easy way to prove this is, put the text direct into the smartforms and see, if it pops up immediately.
    If so, you have to really debug this spot and see if the pased name is correct. (Copy paste it in the debugger, to be really sure, there could be a space in fornt or in the end...)
    If that doesn't help, you have to share more details. Your question is not that very specific. You know
    ~Florian

  • HT1339 My ipod does not appear in itunes.because only resrtartohet, can ndoenj so switch to restore in DFU mode.or something

    My ipod does not appear in itunes.because only resrtartohet, can ndoenj so switch to restore in DFU mode.or something

    I can't understand your question or problem...
    B-rock

  • Arabic Numerical font is not display in PDF report output

    I am facing an issue with Arabic Numerical font, If Query the data from form it is displaying Numeric data in Arabic font, If run a report for same data it is display in Normal format[Arabic font is not displaying].
    The below settings i had done
    1. I added font path to REPORTS_PATH
    2. Set the NLS_LANG
    3. I set font aliases properly in unifont.ali
    4.REPORTS_ARABIC_NUMERAL=CONTEXT
    5.REPORTS_BIDI_ALGORITHM=UNICODE
    Oracle Reports Developer 10.1.2.3
    NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6;
    REPORTS_PATH=$ORACLE_HOME/forms/custom:$ORACLE_HOME/guicommon/tk/admin:$ORACLE_HOME/bin:$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/samples/demo:$ORACLE_HOME/reports/integ:$ORACLE_HOME/reports/printers:${REPORTS_PATH}; export REPORTS_PATH
    [ PDF:Subset ]
    Arial..... = "arial.ttf"
    Arial...Bold.. = "arialbd.ttf"
    Arial..italic... = "ariali.ttf"
    Arial..italic.Bold.. = "arialbi.ttf"
    Tahoma..... = "tahoma.ttf"
    Can any one Please help me to fix this Issue.
    I search lot of sites and blogs but one gave any solution for this problem.
    Excepting Positive reply's
    Regards,
    Avinash

    Hi, check this two link...
    1. Re: PDF Reports in Unicode / Arabic & English
    2. http://www.orafaq.com/forum/t/162197/149761/
    Hope this helps
    If someone response is correct or helpful, mark it.

  • Some fonts do not convert to PDF

    I'm using Pagemaker 7.0.1a on WinXP. Some fonts such as Sanvito (open type) and Myriad Pro (true type) appear fine in PM but do not convert to PDF where they appear as X placeholders as shown below. Top group is Sanvito, bottom is Myriad, Times worked OK. On the other hand, they convert just fine when converting MS Word to a PDF. My system uses Acrobat Distiller 7. Can anyone explain why this is happening?

    Because PageMaker has been a dead program for nearly a decade and is known not to work reliably on the newest OSs, including XP, while Word is still being developed. If I were you, Iwould move on to InDesign while the generous discount upgrade from PageMaker is still available. I wouldn't be surprised if the offer expires when CS5 comes out.

  • Accent marks not appearing in pdfs

    I am in the process of generating Variable Data pdf for an HP Indigo digital press.
    We are having issues with the German and Spanish language versions because accents, umlauts,
    and other accent marks are not appearing. Instead we get a placeholder character.
    I have checked to insure the fonts are not corrupt and have an ASCII code for the characters in question.
    Any suggestions as to how to correct this issue?

    Type the dead letter and the vowel:
    eg umlat is option u then the vowel = äëïöü
    option i then the vowel = âêîôû
    option e then the vowel i = áéíóú
    option ` (above the tab key) then the vowel = àèìòù
    option n then the letter = ñãõ
    They are characters usually associated with the accent and have been standard on the Mac for decades.
    Peter

Maybe you are looking for