URGENT: Data discrepency for Cube and ODS 0fi_ar_4

Hi all,
I am having problems for ODS 0fiar_o03 and Cube 0fiar_c03...
They have been initialised a year back and delta was running almost correctly since then. ..some sometime in August they started showing discrepency from standard R/3 code FBL5N.
The cube and ODs are having exact data till 31/07.2006 .
I tried to delete all data in Cube and ODs by selective deletion of fiscal periods 005.2006 to 008.2006 and reload again from R/3..but still data not matching. Why is that so?
Please suggest steps to correct it. Will assign points.

Dear Andy,
First tell us that how can you say that data is inconsistent? I mean on what criteria you consolidate data.
Secondly have you checked in R3 that after 31.07.2006 was there any change or anything new (company code or smthing) added.
My suggestion would be;
First:
1. Go to RSA3 (in R3) and check that are you able to see(pull) the data you want.
2. Now check wheather it is coming in BW or not?
3. If coming then manually update cube through data mart.
Second:
1. if not able to get data through standard extractor then try to load by flat file. (last option)
2. check wheather deltas after your repair full upload are giving you correct deltas or not? if not then re-initialize and reshedule deltas.
Hope it helps, do revert.

Similar Messages

Delta and Full Load question for cube and ODS

Hi all,
I need to push full load from Delta ODS.
I have process chain.... in which the steps are like below,
1. R/3 extractor for ODS1 (delta)
2. ODS1 to ODS2 (delta)
3. ODS2 to Cube ---> needs to be full load
Now when i run process chain by further processing automatically ODS2 does init/delta for Cube.
How can i make it possible for full load ??
can any one guide anything in this ?
Thanks,
KS

Hi,
1. R/3 extractor for ODS1 (delta) : This is OK, normally you can put the Delta InfoPack in Process Chian
2. ODS1 to ODS2 (delta): It automatically flow from ODS1 to ODS2 (you need to select Update Data automaticall in the Targets at the time of ODS creation)
3. ODS2 to Cube ---> needs to be full load :
This you create a Update rules from ODS1 to Cube then Create InfoPackage in between ODS2 and Cube then do full loads. You can delete the data in the CUbe before the load ann dthen do Full load to Cube.
Note: In ODS2 don't select Upadate Data autmaticlly to Data Targets
Thanks
Reddy
Edited by: Surendra Reddy on Nov 21, 2008 1:57 PM

Looking for a specific data in all the cubes and ods

Hi Gurus
"i am looking for all the cubes/ods that contain a specific Controlling area(lets say 0123) and a specific 0plant (lets say plant 4567), now i can go down to every cube and ods and search for it in its contents but i have like hundereds of cubes it will take days, is there a simple way to look for some particular data in all the cubes/ods, and it tells me which cube/ods contains these plants and controlling area."
<b>now based on this above post i got a reply that abaping can help.</b>
"you could write an ABAP where you call for every InfoProvider function RSDRI_INFOPROV_READ_RFC like
loop at <infoprov-table> assigning <wa>.
call function 'RSDRI_INFOPROV_READ_RFC'
exporting
i_infoprov = <wa>
tables
i_t_sfc = i_t_rsdri_t_sfc
i_t_range = l_t_rsdri_t_range
e_t_rfcdata = l_t_rsdri_t_rfcdata
exceptions
illegal_input = 1
illegal_input_sfc = 2
illegal_input_sfk = 3
illegal_input_range = 4
illegal_input_tablesel = 5
no_authorization = 6
generation_error = 7
illegal_download = 8
illegal_tablename = 9
illegal_resulttype = 10
x_message = 11
data_overflow = 12
others = 13.
endloop.
i_t_sfc should contain 0PLANT and i_t_range the restriction on you plant value.
with a describe table statement on l_t_rsdri_t_rfcdata you can get the hits.
check test program RSDRI_INFOPROV_READ_DEMO for details
best regards clemens "
<b>now my question is how do i use this code to check each and every cube in bw, it seems like it is meant to be for only one cube at a time. and what does he mean by "for every infoprovider function"</b>
thanks

THANKS

Can I use one infosource to update data to CUBE and ODS???

Hi all,
Can anyone tell me if I can load data to OSD and Cube from one the same InfoSource? As I know, I have to have "0recordmode"(update mode) in communication structure for ODS not for Cube. So how can ODS and Cube use the same Infosucre to update data?
Thank you

John,
Depending on the volume of data and the type of infosource, sometime one update to ODS first and then subsequently update to the Cube or update both cube and ODS in parallel.
For example, if you use AR or AP line item datasources, since you are extracting from both open line and closed line items tables, there could be multiple records for the same thing coming through. First when it appears as an open line item, and when it is paid, it appears again as a paid line item so if you update directly to the cube, you can have multiples of the real value. Thus in this instance you update from infosource to ODS then subsequently use delta update from ODS to cube. CCA and C0-PA on delta mode are example where there are no overlapping, thus you can update both ODS and Cube at the same time.
Hope this helps,
Mary

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

Can we add new cubes and ODS after creating the multiprovider?

Hi all,
i created a multiprovider on a cube and ODS. Now i needed one more charactersitic from other cube.then i did change multiprovider and then add that new cube and did the identification, and adjusted the query, when i ran the query it is showing chracteristic as # and not assigned. I even tried bringing in 0infoprovider object to see whether data is coming from third infoprovider, it is not showing up any data from third one. i tried logging out of bex and logging back in.....but still no use..............i am wondering now, once a multiprovider is created can new infoprovider be added to it ?
i am even able to see the new key figures and chracteristic in my query.but data is not getting populated...i also checked and found that the data is available in the infoproviders....
plz help me out..
points will be assigned for inputs

Hi Bhanu,
nice to see your answer, I saw a lot of helpful posts on SDN by you.
I did the RSRT with debug multiprovider, it said,
0FISCPER: General restriction for InfoProvider ZSD_C12 not possible
Access to ZSD_C12 was excluded
now i corrected it, it is populating the key figure now but not the chracteristic still.....the chracteristic is still getting value only from one of the info providers
importantly, when i bring infoprovider above the keyfigures space on query, it still only shows two info providers for each key figure and not the third one ,the key figure coming the third one is only shown in overall result. how can i solve this?
i tried rsr_gen_direct_all_queries as told by krian, but still cant get the data in the report. i did list cube on mulitiprovider and i see the data for that chracteristic there....
are there any other options in RSRT to find possible setting faults....
thanks in advance
points will be assigned for inputs

Re:cube and ods enhancement

1.i'm trying to add a new field to my old cube ...plz guide me the steps
i got a small doubt here ,i know we have to delete the data in the cube but i'm curious why we delete data and than enhance
2.i want to add a filed to my exsisting ods..plz guide me the steps
i'm confused with ods..whether to delete to data or not,plz tell me the reasons for deleting and for not deleting...

Hi,
NO need to delete the data in ODS as well as in Cube. In Development box, add new feilds to Cube and ODS and then map in Update rules and send it to Qty and Prod servers. If you are filling data for new feilds from existing Transfer structure it is Ok, but if you want to add any other objescts in Transfer rules, you need to activate the trasnfer rules also. I jsut added new feilds to my existing cube, it is having 1 year data, it was not effected, it is working fine.
Thanks
Reddy

Selective Deletion From Cube and ODS using Process chain

Hi all,
is there any way that i can include selective deletion in a process chain, there is no stand process types for selective deletion, I need to delete the closed items from cube and ods and i need to schedule this??? any ideas?
Thanks,
Shetty.

Shetty,
You can delete Data from this using One custom Program. You need to use either RSDRD_SEL_DELETION(function module ) or RSDRD_BUILD_REPORT_FOR_BATCH(Function Module). there is a parameter in above functioen modules I_THX_SEL which needs to be populated using selections.
or
You need to schedule the Background job from Manage screen on Monthly Basis(Provided that selection should be fixed in every month).
I will update the thread with psudo code.
all the best.
Regards,
Nagesh Ganisetti.
Message was edited by:
Nagesh Ganisetti

How to find number of records in a cube and ODS....

Hi,
How do we find total number of records in a cube and ODS?
Is there any Tcode for this ?
From the content it is difficult to get the number of records, if it is more in number.
Thanks,
Jeetu

Hello ,
Please check the following thread,
Number of records in a infocube
hope it helps,
assign points if helpful.

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
         I have a requirement in reporting to display actual data from one cube and plan data from a different one.
        The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ...   ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
     We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
         Plan Value is from CUBE2
Thanks
Kumar

A plan to remove Cubes and ODS

Hi guys,
I'd like to get rid of Infocubes and ODS which are not use anymore. After to have identified the elements (queries, Process Chain, Specific Object, ruels,etc.) to remove, i'm thinking about a plan. What do you think about the following removal sequence :
1.remove queries
2.remove or change Process Chains
3.delete data contained inside InfoCube and ODS
4.remove update rules and transfer rules
5.remove InfoCube and ODS following the oposite way of loading process
6.remove InfoSource and DataSource
7.delete data contained inside Specific InfoObject
8.delete Specific InfoObject
Thanks a lot for your feedback

This is what i done
Thanks guys for your advices. Regarding transport requests, how to proceed ?
Please take a look on the follow list :
TR_1     Queries
TR_2     Process Chains
TR_3     InfoCubes & ODS
TR_4     InfoSources&Rules
TR_5     DataSources&InfoPackages
TR_6     Specific InfoObjects
Perhaps i should transport rules and InProviders together ..

ODS as data source for the next ODS - can't see the name in the DS list

Hello, experts!
Need your help. I'm trying to use Staging ODS for the transaction data to populate data into next level of ODS - Standard ODS. The problem is that Staging ODS does not appear in the Data Source list for the Standard ODS when I Assign data sources(and would not let me paste the Staging ODS data source name either). I did Replicate data source for the Staging ODS and Generate Export data sources but it did not fix the problem.
Any suggestions?
Thank you.
Alina.

OK, you're talking about the selection screen "Available datasources" showing only 50 entries right?
In my system the screen can show more than 900... must be one of your user settings in the gui...
just under the tab "restrictions" there is a line with an arrow pointing down; click this line to expand the restrictions...
In the DataSource field enter 8* or 8<ODS_TECH_NAME> in order to see your DSource.
Otherwise in RSA13 in your Dsources overview, right click it and "assign infosource"; it will also make it...
hope this helps...
Olivier.
Edited by: Olivier Cora on Jul 30, 2008 6:31 PM

Create withholding tax data subsequently for reconciled and open items in c

Hi All,
Mine is a US co code and I have a vendor for which invoice and payment documents are posted. After posting the invoice i found that the vendor is subjected to classic withholding tax which i did not calculate when posting invoice, making payments.
Now i have changed the vendor master data with relevant withholding tax details.
I know the program RFWT0020 allows us to create withholding tax data subsequently for reconciled and open items in cases where vendors or customers become liable for withholding tax with a tax rate of 0 %.
It is not working out for me.
Can any body help me on this.
Thanks in advance.

Dear all,
by se38 --> report documentation, You can read carefully the following:
The auxiliary program makes it possible to convert both classic and extended withholding tax data. However, with classic withholding tax, ONLY VENDOR data can be converted.
In addition, the program enables the withholding tax code to be changed for reconciled and open items with existing withholding tax data. For this, the tax rate of the existing withholding tax data as well as the tax rate of the new withholding tax code must be 0%. The new withholding tax codes are taken from the customer or vendor master data. In the case of extended withholding tax, the withholding tax code is only changed if the related withholding tax categories are the same. The withholding tax base amount is not changed by this procedure.
Recreating or changing the withholding tax data requires that the program first be executed for INVOICES and then executed for PAYMENTS in a subsequent step.
I hope this helps You.
Mauri

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Upon transferring to the cloud, all my previous mail says the same date, except for today and yesterday. The rest says it came in on the same date I had to replace the hard drive 3 years ago. Totally stumped. It didn't do this on my mac...

Upon transferring to the cloud, all my previous mail says it entered my box on the same date, except for today and yesterday. Everything else says it came in on the same date on which I had to replace the hard drive 3 years ago. Totally stumped. It didn't do this on my mac...only when I moved. I have bad feelings about being to fix this...Any suggestions?

Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
https://www.youtube.com/watch?v=gLbasVD69xo

URGENT: Data discrepency for Cube and ODS 0fi_ar_4

Similar Messages

Maybe you are looking for