Urgent: Data Loading error(Load failed with Short Dump) caller 70 missing
Hi please go through the error occured.
<b>"Request is still running.
Diagnosis:
No error could be found. The current process has probably not finished yet.
System Response:
The ALE Inbox of the SAP BW is identical to ALE Outbox of the source System and /or the maximum wait time for this request has not yet run out and/or the batch job in the cource system has not ended.
current status
in the source sytem."</b>
Update mode: Full, processing Online.
I think we processed the infopackage in the online. if we process it in the back ground then we won't face any problem. Singal turns to Red.
Please guide us. we need to load it immidiately.
Thanks in advance.
Regards,
Nagesh.
Message was edited by: Nagesh Ganisetti
Message was edited by: Nagesh Ganisetti
Hi Friends,
at last the load has Terminated with Short Dump. Can any one guide me how can i reslove this. we could see the data in PSA.
i'm sending the part of the short dump.
Too many parameters specified with PERFORM.
What happened?
In a subroutine call, there were more parameters than in the routinedefinition.
Error in ABAP application program.
The current ABAP program "GP3KGSUXARXPB2F9YCR4B3MFPT6 " had to be terminated because one of statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A PERFORM was used to call the routine "VALUE_TO_SID_CONVERT_DB" of the program
"GP3KGSUXARXPB2F9YCR4B3MFPT6 ".
This routine contains exactly 7 formal parameters, but the current
call contains 8 actual parameters.
parameters.
How to correct the error
Correct the PERFORM call. You can find out where the call occurs in the section "Active calls / events".
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
Please guide me.
Regards,
Nagesh.
Message was edited by: Nagesh Ganisetti
Similar Messages
-
Attribute change run process type failed with short dump
Hi all,
In the process chain Attribute change run process type failed with short dump. I checked the locks in SM12 but there are no locks associated. I checked in the attribute change run screen through RSA1 -> infoobject list but there are no infoobjects there. I think the ACR was completed successfully, still the process type in the PC was in red colour. What to do and let me know what happened here.
Thanks,
Jack1. This kind of scenario is extremely rare but it happens sometimes. It might be the case that 2 attribute change runs are running at the same time.
2. Same IO is being used in Differnet PC and getting activated.
I think if this frequently occurs you need to check at the time of locking all running jobs and see whether anywhere else or simultaneously 2 ACR are running.
Please do close the thread if that answers your questions. Please help us keep the forums clean and open useful information only.
For more information search on help.sap.com and you will get lots of material.
Regards.
Den -
ERROR = CONNECT failed with sql error '1017'
Hi,
we are getting the following error when we run r3trans -dx.It is an windows system.
Here i have attached the trans.log.
4 ETW000 r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.11.2010 - 08:58:12
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 30 08:58:14 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 3857 0.003857
4 ETW000 [dev trc ,00000] using "E:\usr\sap\TQ1\DVEBMGS10\exe\dboraslib.dll"
4 ETW000 22 0.003879
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 9 0.003888
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 18 0.003906
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 143 0.004049
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 16 0.004065
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 25 0.004090
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.004108
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 29 0.004137
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 16 0.004153
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 15 0.004168
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 18 0.004186
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 223 0.004409
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 6714 0.011123
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 0.011146
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC 2397 0.013543
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPRP1's password 16 0.013559
4 ETW000 [dev trc ,00000] Connecting as /@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 22 0.013581
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 18 0.013599
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 109 0.013708
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 6894 0.020602
4 ETW000 [dev trc ,00000] Allocating server context handle 14 0.020616
4 ETW000 [dev trc ,00000] Attaching to DB Server TQ1 (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608)
4 ETW000 37 0.020653
4 ETW000 [dev trc ,00000] Assigning server context 0000000006E80608 to service context 0000000006E7E238
4 ETW000 21591 0.042244
4 ETW000 [dev trc ,00000] Allocating user session handle 32 0.042276
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 32 0.042308
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 34551 0.076859
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 23657 0.100516
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 13 0.100529
4 ETW000 [dev trc ,00000] Try to connect with default password 12 0.100541
4 ETW000 [dev trc ,00000] Connecting as SAPRP1/<pwd>@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 17 0.100558
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.100574
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 18 0.100592
4 ETW000 [dev trc ,00000] Assigning username to user session 000000000032B808
4 ETW000 15 0.100607
4 ETW000 [dev trc ,00000] Assigning password to user session 000000000032B808
4 ETW000 23 0.100630
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 18 0.100648
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 3281 0.103929
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 19 0.103948
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 10 0.103958
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#5 @ 431]
4 ETW000 10634 0.114592
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#5 @ 431]
4 ETW000 17 0.114609
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'TQ1'"Hi,
LOG BY0=>ORA-01017: invalid username/password; logon denied
You need to change your schema users password using "brconnect"
Try as follow:
1. Login as ora<sid>
2. Use below command to reset SAPRP1 users password
# brconnect -u system -f chpass -o SAPRP1 -p <new password>
If it still doesn't work... just set the password as "sap" (it is default password for schema user)
# brconnect -u system -f chpass -o SAPRP1 -p sap
Hope, it helps you...
Suggestions:
Above thing will help even if OPS$ mechanism is not set correctly...
But it is recommended to create and set permissions for OPS$ user. Else some BRTools function will produce errors...
Relevant notes are already suggested by others...
Please go through it word by word...
Regards.
Rajesh Narkhede -
EPMAPatch Error: Opatch failed with Error Code = 73
Hi All,
I am trying to Install the Patch EPMA11.1.1.2.03, I got error.
The Error is: F:\hyperion\Opatch>hpatch apply EPMA_11_1_1_2_03
Invoking Opatch 10.2.0.4.9
Oracle Interim patch Installer version 10.2.0.4.9
Copyrights <c> 2009, Oracle corporation. All rights reserved.
Oracle Home:f:\Hyperion
CentralInventory:C:\Programfile\Oracle\Inventory
From:n\a
OPatch version:10.2.0.4.9
OUI Location:f:\hyperion\oui
Logfile Location:f:\Hyperion\cfgtoollogs\opatch\opatch2010-07-05_14-32-38PM.log
Patch history file:f:\ Hyperion\cfgtoollogs\opatch\opatch_history.txt
ApplySession applying interim patch ‘9206696’ to OH ‘f:\Hyperion’
List of Homes on this system:
OPatch Session cannot load Inventory for the given Oracle Home f:\Hyp[erion. Possible causes are:
No read or write permission to ORACLE_HOME/.Patch_storage
Central Inventory is locked by another OUI Instance
No read permission to Central Inventory
The lock file exists in ORACLE_HOME/.Patch_storage
The Oracle Home does not exist in Central Inventory
Apply session failed:Apply session failed to prepare the system. Oracle Home Inventory gets null oracleHomeInfo system Intact, patch will not attempt to restore the system
Opatch failed with error code = 73
Please help,Its urgent for us
Thanks in advance.792208 wrote:
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanksif the connection request actually gets to the listener, then it will be logged.
If no record exists within listener.log file, then the root cause & solution are external to Oracle. -
Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'
Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 11:56:40 2009 110 0.000
110
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
137
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000
199
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 77 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8142 0.008
418
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
461
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
522
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 421 0.008
943
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.008
989
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 75 0.009
064
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
165
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 55 0.009
220
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 53 0.009
273
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
322
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 521 0.009
843
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
927
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 65 0.009
992
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2033 0.012
025
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPVAP's password 49 0.012
074
4 ETW000 [dev trc ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000 57 0.012
131
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 49 0.012
180
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 58 0.012
238
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 48 0.012
286
4 ETW000 [dev trc ,00000] Allocating server context handle 42 0.012
328
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 95 0.012
423
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 4556 0.016
979
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 59 0.017
038
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 39 0.017
077
4 ETW000 [dev trc ,00000] Try to connect with default password 184 0.017
261
4 ETW000 [dev trc ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000 46 0.017
307
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 48 0.017
355
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 48 0.017
403
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000 54 0.017
457
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000 54 0.017
511
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x1113b99f8 42 0.017
553
4 ETW000 [dev trc ,00000] Allocating server context handle 33 0.017
586
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 54 0.017
640
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 2547 0.020
187
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 45 0.020
232
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 28 0.020
260
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000 220 0.020
480
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000 42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank ShekharHi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 15:54:42 2009 109 0.000
109
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
136
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 61 0.000
197
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 79 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8174 0.008
450
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
493
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
554
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 430 0.008
984
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.009
030
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 76 0.009
106
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
154
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 57 0.009
264
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 54 0.009
318
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
367
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 526 0.009
893
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
977
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 64 0.010
041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000 1464 0.011
505
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code -1 40 0.011
545
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000 58 0.011
603
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error -1 performing CON [dblink#3 @ 428]
4 ETW000 74 0.011
677
4 ETW000 [dblink ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000 55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar -
Help ME [ Error: InitFastLoad failed with 3 : can't fastload LoBs ]
Dear Expert,
During installation of SAP ERP 2005, I have got error "InitFastLoad failed with <3 : can't fastload LoBs>" while runing "Import ABAP".
Can you sir please help me out how do I resolve this problem ? Installation has got stuck at that stage....
So I agressively looking for your positive reply(solution), please .....
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080428160335
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\DVDdump\EXP\exp4\EXP4\DATA\SAPSSEXC.STR C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL SAPSSEXC.TSK MSS -l SAPSSEXC.log
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe: job completed
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080428160335
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080428160336
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
F:\usr\sap\D11\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: AAB_ID_PROP created
(DB) INFO: AAB_ID_PROP~0 created
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: import of AAB_ID_PROP completed (751 rows) #20080428160342
(DB) INFO: AAB_ID_PROPT created
(DB) INFO: AAB_ID_PROPT~0 created
(IMP) INFO: import of AAB_ID_PROPT completed (12629 rows) #20080428160347
(DB) INFO: BRATEXT created
(DB) INFO: BRATEXT~0 created
(IMP) INFO: import of BRATEXT completed (229628 rows) #20080428160443
(DB) INFO: D010INC created
(DB) INFO: D010INC~0 created
(IMP) INFO: import of D010INC completed (16063844 rows) #20080428163452
(DB) INFO: D010INC~1 created
(DB) INFO: D010TAB created
(DB) INFO: D010TAB~0 created
(IMP) INFO: import of D010TAB completed (47877498 rows) #20080428191531
(DB) INFO: D010TAB~1 created
(DB) INFO: D020S created
(DB) INFO: D020S~0 created
(IMP) INFO: import of D020S completed (190477 rows) #20080428202652
(DB) INFO: D020T created
(DB) INFO: D020T~0 created
(IMP) INFO: import of D020T completed (854106 rows) #20080428202916
(DB) INFO: D021T created
(DB) INFO: D021T~0 created
(IMP) INFO: import of D021T completed (7164013 rows) #20080428210110
(DB) INFO: D301T created
(DB) INFO: D301T~0 created
(IMP) INFO: import of D301T completed (6654 rows) #20080428210110
(DB) INFO: D301T~A created
(DB) INFO: D345T created
(DB) INFO: D345T~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of D345T completed (6585 rows) #20080428210240
(DB) INFO: D347T created
(DB) INFO: D347T~0 created
(IMP) INFO: import of D347T completed (57433 rows) #20080428210255
(DB) INFO: DBDIFF created
(DB) INFO: DBDIFF~0 created
(IMP) INFO: import of DBDIFF completed (205 rows) #20080428210256
(DB) INFO: DBMAPS created
(DB) INFO: DBMAPS~0 created
(IMP) INFO: import of DBMAPS completed (0 rows) #20080428210256
(DB) INFO: DD01L created
(DB) INFO: DD01L~0 created
(IMP) INFO: import of DD01L completed (76408 rows) #20080428210307
(DB) INFO: DD01L~1 created
(DB) INFO: DD01T created
(DB) INFO: DD01T~0 created
(IMP) INFO: import of DD01T completed (1249769 rows) #20080428210607
(DB) INFO: DD02L created
(DB) INFO: DD02L~0 created
(IMP) INFO: import of DD02L completed (321686 rows) #20080428210738
(DB) INFO: DD02L~1 created
(DB) INFO: DD02T created
(DB) INFO: DD02T~0 created
(IMP) INFO: import of DD02T completed (4537088 rows) #20080428212410
(DB) INFO: DD03L created
(DB) INFO: DD03L~0 created
(IMP) INFO: import of DD03L completed (5159366 rows) #20080428215555
(DB) INFO: DD03L~1 created
(DB) INFO: DD03L~2 created
(DB) INFO: DD03L~3 created
(DB) INFO: DD03L~4 created
(DB) INFO: DD03L~5 created
(DB) INFO: DD03L~6 created
(DB) INFO: DD03L~7 created
(DB) INFO: DD03T created
(DB) INFO: DD03T~0 created
(IMP) INFO: import of DD03T completed (1028548 rows) #20080428231122
(DB) INFO: DD04L created
(DB) INFO: DD04L~0 created
(IMP) INFO: import of DD04L completed (356654 rows) #20080428231258
(DB) INFO: DD04L~1 created
(DB) INFO: DD04T created
(DB) INFO: DD04T~0 created
(IMP) INFO: import of DD04T completed (5545988 rows) #20080428234900
(DB) INFO: DD06L created
(DB) INFO: DD06L~0 created
(IMP) INFO: import of DD06L completed (172 rows) #20080428234900
(DB) INFO: DD06T created
(DB) INFO: DD06T~0 created
(IMP) INFO: import of DD06T completed (1277 rows) #20080428234901
(DB) INFO: DD07L created
(DB) INFO: DD07L~0 created
(IMP) INFO: import of DD07L completed (144328 rows) #20080428234937
(DB) INFO: DD07T created
(DB) INFO: DD07T~0 created
(IMP) INFO: import of DD07T completed (2408004 rows) #20080429000135
(DB) INFO: DD09L created
(DB) INFO: DD09L~0 created
(IMP) INFO: import of DD09L completed (74473 rows) #20080429000143
(DB) INFO: DD20L created
(DB) INFO: DD20L~0 created
(IMP) INFO: import of DD20L completed (216 rows) #20080429000145
(DB) INFO: DD25L created
(DB) INFO: DD25L~0 created
(IMP) INFO: import of DD25L completed (47312 rows) #20080429000202
(DB) INFO: DD25L~1 created
(DB) INFO: DD26S created
(DB) INFO: DD26S~0 created
(IMP) INFO: import of DD26S completed (116670 rows) #20080429000235
(DB) INFO: DD26S~1 created
(DB) INFO: DD26S~2 created
(DB) INFO: DD27S created
(DB) INFO: DD27S~0 created
(IMP) INFO: import of DD27S completed (488120 rows) #20080429000409
(DB) INFO: DD27S~1 created
(DB) INFO: DD27S~2 created
(DB) INFO: DD28S created
(DB) INFO: DD28S~0 created
(IMP) INFO: import of DD28S completed (71637 rows) #20080429000529
(DB) INFO: DD29L created
(DB) INFO: DD29L~0 created
(IMP) INFO: import of DD29L completed (42217 rows) #20080429000550
(DB) INFO: DD30L created
(DB) INFO: DD30L~0 created
(IMP) INFO: import of DD30L completed (14872 rows) #20080429000600
(DB) INFO: DD30L~EXI created
(DB) INFO: DD30L~MET created
(DB) INFO: DD30L~TXT created
(DB) INFO: DD30T created
(DB) INFO: DD30T~0 created
(IMP) INFO: import of DD30T completed (248836 rows) #20080429000725
(DB) INFO: DD31S created
(DB) INFO: DD31S~0 created
(IMP) INFO: import of DD31S completed (22382 rows) #20080429000727
(DB) INFO: DD32S created
(DB) INFO: DD32S~0 created
(IMP) INFO: import of DD32S completed (65354 rows) #20080429000750
(DB) INFO: DD32S~ROL created
(DB) INFO: DD32S~SQL created
(DB) INFO: DD33S created
(DB) INFO: DD33S~0 created
(IMP) INFO: import of DD33S completed (67354 rows) #20080429000820
(DB) INFO: DD35L created
(DB) INFO: DD35L~0 created
(IMP) INFO: import of DD35L completed (62242 rows) #20080429000843
(DB) INFO: DD35L~1 created
(DB) INFO: DD36S created
(DB) INFO: DD36S~0 created
(IMP) INFO: import of DD36S completed (222177 rows) #20080429000912
(DB) INFO: DD40L created
(DB) INFO: DD40L~0 created
(IMP) INFO: import of DD40L completed (83102 rows) #20080429000924
(DB) INFO: DD40L~1 created
(DB) INFO: DD40T created
(DB) INFO: DD40T~0 created
(IMP) INFO: import of DD40T completed (1288553 rows) #20080429001529
(DB) INFO: DD42S created
(DB) INFO: DD42S~0 created
(IMP) INFO: import of DD42S completed (30753 rows) #20080429001539
(DB) INFO: DDTYPES created
(DB) INFO: DDTYPES~0 created
(IMP) INFO: import of DDTYPES completed (821974 rows) #20080429001747
(DB) INFO: DDTYPET created
(DB) INFO: DDTYPET~0 created
(IMP) INFO: import of DDTYPET completed (62242 rows) #20080429001810
(DB) INFO: DDXTF created
(DB) INFO: DDXTF~0 created
(IMP) INFO: import of DDXTF completed (0 rows) #20080429001811
(DB) INFO: DDXTF_CONV_UC created
(DB) INFO: DDXTF_CONV_UC~0 created
(IMP) INFO: import of DDXTF_CONV_UC completed (0 rows) #20080429001817
(DB) INFO: DDXTT created
(DB) INFO: DDXTT~0 created
(IMP) INFO: import of DDXTT completed (0 rows) #20080429001822
(DB) INFO: DDXTT_CONV_UC created
(DB) INFO: DDXTT_CONV_UC~0 created
(IMP) INFO: import of DDXTT_CONV_UC completed (0 rows) #20080429001823
(DB) INFO: DF03L created
(DB) INFO: DF03L~0 created
(IMP) INFO: import of DF03L completed (1764 rows) #20080429001825
(DB) INFO: DF03L~ARI created
(DB) INFO: DF03T created
(DB) INFO: DF03T~0 created
(IMP) INFO: import of DF03T completed (216352 rows) #20080429002017
(DB) INFO: DF03T~OBJ created
(DB) INFO: DF04L created
(DB) INFO: DF04L~0 created
(IMP) INFO: import of DF04L completed (3715 rows) #20080429002030
(DB) INFO: DF04L~ARI created
(DB) INFO: DF04L~STR created
(DB) INFO: DF04L~SYN created
(DB) INFO: DF04T created
(DB) INFO: DF04T~0 created
(IMP) INFO: import of DF04T completed (35845 rows) #20080429002048
(DB) INFO: DF04T~OBJ created
(DB) INFO: DF06L created
(DB) INFO: DF06L~0 created
(IMP) INFO: import of DF06L completed (0 rows) #20080429002049
(DB) INFO: DF06L~ARI created
(DB) INFO: DF06T created
(DB) INFO: DF06T~0 created
(IMP) INFO: import of DF06T completed (0 rows) #20080429002050
(DB) INFO: DF07L created
(DB) INFO: DF07L~0 created
(IMP) INFO: import of DF07L completed (0 rows) #20080429002050
(DB) INFO: DF07L~ARI created
(DB) INFO: DF07L~OVW created
(DB) INFO: DF07T created
(DB) INFO: DF07T~0 created
(IMP) INFO: import of DF07T completed (0 rows) #20080429002051
(DB) INFO: DF08L created
(DB) INFO: DF08L~0 created
(IMP) INFO: import of DF08L completed (0 rows) #20080429002052
(DB) INFO: DF08L~ARI created
(DB) INFO: DF08T created
(DB) INFO: DF08T~0 created
(IMP) INFO: import of DF08T completed (0 rows) #20080429002053
(DB) INFO: DF10L created
(DB) INFO: DF10L~0 created
(IMP) INFO: import of DF10L completed (0 rows) #20080429002055
(DB) INFO: DF10L~ARI created
(DB) INFO: DF10L~PRE created
(DB) INFO: DF10L~SUC created
(DB) INFO: DF10T created
(DB) INFO: DF10T~0 created
(IMP) INFO: import of DF10T completed (0 rows) #20080429002057
(DB) INFO: DF11L created
(DB) INFO: DF11L~0 created
(IMP) INFO: import of DF11L completed (0 rows) #20080429002058
(DB) INFO: DF11L~ARI created
(DB) INFO: DF11L~REF created
(DB) INFO: DF11T created
(DB) INFO: DF11T~0 created
(IMP) INFO: import of DF11T completed (0 rows) #20080429002059
(DB) INFO: DF12L created
(DB) INFO: DF12L~0 created
(IMP) INFO: import of DF12L completed (17 rows) #20080429002100
(DB) INFO: DF12L~ARI created
(DB) INFO: DF12L~REF created
(DB) INFO: DF12T created
(DB) INFO: DF12T~0 created
(IMP) INFO: import of DF12T completed (17 rows) #20080429002101
(DB) INFO: DF13L created
(DB) INFO: DF13L~0 created
(IMP) INFO: import of DF13L completed (0 rows) #20080429002103
(DB) INFO: DF13L~ARI created
(DB) INFO: DF13T created
(DB) INFO: DF13T~0 created
(IMP) INFO: import of DF13T completed (0 rows) #20080429002103
(DB) INFO: DF14L created
(DB) INFO: DF14L~0 created
(IMP) INFO: import of DF14L completed (5079 rows) #20080429002107
(DB) INFO: DF14L~ARI created
(DB) INFO: DF14L~PS created
(DB) INFO: DF14L~REF created
(DB) INFO: DF14T created
(DB) INFO: DF14T~0 created
(IMP) INFO: import of DF14T completed (108405 rows) #20080429002147
(DB) INFO: DF14T~OBJ created
(DB) INFO: DF15L created
(DB) INFO: DF15L~0 created
(IMP) INFO: import of DF15L completed (0 rows) #20080429002151
(DB) INFO: DF15L~ARI created
(DB) INFO: DF15T created
(DB) INFO: DF15T~0 created
(IMP) INFO: import of DF15T completed (0 rows) #20080429002152
(DB) INFO: DF16L created
(DB) INFO: DF16L~0 created
(IMP) INFO: import of DF16L completed (724 rows) #20080429002154
(DB) INFO: DF16L~REF created
(DB) INFO: DF16T created
(DB) INFO: DF16T~0 created
(IMP) INFO: import of DF16T completed (1448 rows) #20080429002156
(DB) INFO: DF16T~OBJ created
(DB) INFO: DF30S created
(DB) INFO: DF30S~0 created
(IMP) INFO: import of DF30S completed (12181 rows) #20080429002159
(DB) INFO: DF30S~SUC created
(DB) INFO: DF34S created
(DB) INFO: DF34S~0 created
(IMP) INFO: import of DF34S completed (0 rows) #20080429002201
(DB) INFO: DF40D created
(DB) INFO: DF40D~0 created
(IMP) INFO: import of DF40D completed (6188 rows) #20080429002207
(DB) INFO: DF40D~OBJ created
(DB) INFO: DF40D~SHI created
(DB) INFO: DF41S created
(DB) INFO: DF41S~0 created
(IMP) INFO: import of DF41S completed (140387 rows) #20080429002243
(DB) INFO: DF41S~ACT created
(DB) INFO: DF41S~OVW created
(DB) INFO: DF42S created
(DB) INFO: DF42S~0 created
(IMP) INFO: import of DF42S completed (125131 rows) #20080429002312
(DB) INFO: DF43S created
(DB) INFO: DF43S~0 created
(IMP) INFO: import of DF43S completed (0 rows) #20080429002313
(DB) INFO: DIAPAR created
(DB) INFO: DIAPAR~0 created
(IMP) INFO: import of DIAPAR completed (10171 rows) #20080429002314
(DB) INFO: DM02L created
(DB) INFO: DM02L~0 created
(IMP) INFO: import of DM02L completed (5270 rows) #20080429002315
(DB) INFO: DM02S created
(DB) INFO: DM02S~0 created
(IMP) INFO: import of DM02S completed (0 rows) #20080429002316
(DB) INFO: DM02T created
(DB) INFO: DM02T~0 created
(IMP) INFO: import of DM02T completed (42547 rows) #20080429002327
(DB) INFO: DM03S created
(DB) INFO: DM03S~0 created
(IMP) INFO: import of DM03S completed (12167 rows) #20080429002334
(DB) INFO: DM03S~1 created
(DB) INFO: DM25L created
(DB) INFO: DM25L~0 created
(IMP) INFO: import of DM25L completed (2652 rows) #20080429002336
(DB) INFO: DM25L~A created
(DB) INFO: DM26L created
(DB) INFO: DM26L~0 created
(IMP) INFO: import of DM26L completed (8520 rows) #20080429002342
(DB) INFO: DM26L~A created
(DB) INFO: DM40L created
(DB) INFO: DM40L~0 created
(IMP) INFO: import of DM40L completed (5050 rows) #20080429002400
(DB) INFO: DM40L~A created
(DB) INFO: DM40T created
(DB) INFO: DM40T~0 created
(IMP) INFO: import of DM40T completed (40525 rows) #20080429002417
(DB) INFO: DM41S created
(DB) INFO: DM41S~0 created
(IMP) INFO: import of DM41S completed (20298 rows) #20080429002430
(DB) INFO: DM41S~A created
(DB) INFO: DM42S created
(DB) INFO: DM42S~0 created
(IMP) INFO: import of DM42S completed (9688 rows) #20080429002449
(DB) INFO: DM42S~A created
(DB) INFO: DM42T created
(DB) INFO: DM42T~0 created
(IMP) INFO: import of DM42T completed (3250 rows) #20080429002453
(DB) INFO: DM42T~1 created
(DB) INFO: DM43T created
(DB) INFO: DM43T~0 created
(IMP) INFO: import of DM43T completed (3613 rows) #20080429002455
(DB) INFO: DM45L created
(DB) INFO: DM45L~0 created
(IMP) INFO: import of DM45L completed (616 rows) #20080429002456
(DB) INFO: DM45T created
(DB) INFO: DM45T~0 created
(IMP) INFO: import of DM45T completed (5217 rows) #20080429002459
(DB) INFO: DM46S created
(DB) INFO: DM46S~0 created
(IMP) INFO: import of DM46S completed (1796 rows) #20080429002501
(DB) INFO: DM46S~A created
(DB) INFO: DOKCLU created
(DB) INFO: DOKCLU~0 created
(IMP) INFO: import of DOKCLU completed (4447360 rows) #20080429013742
(DB) INFO: DOKHL created
(DB) INFO: DOKHL~0 created
(IMP) INFO: import of DOKHL completed (4804536 rows) #20080429020852
(DB) INFO: DOKIL created
(DB) INFO: DOKIL~0 created
(IMP) INFO: import of DOKIL completed (4458432 rows) #20080429022425
(DB) INFO: DSYST created
(DB) INFO: DSYST~0 created
(IMP) INFO: import of DSYST completed (54353 rows) #20080429022444
(DB) INFO: DYNPSOURCE created
(DB) INFO: DYNPSOURCE~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of DYNPSOURCE completed (190478 rows) #20080429055103
(DB) INFO: ENHCOMPCHILDCOMP created
(DB) INFO: ENHCOMPCHILDCOMP~0 created
(IMP) INFO: import of ENHCOMPCHILDCOMP completed (14 rows) #20080429055108
(DB) INFO: ENHCOMPCHILDCOMP~1 created
(DB) INFO: ENHCOMPCHILDENH created
(DB) INFO: ENHCOMPCHILDENH~0 created
(IMP) INFO: import of ENHCOMPCHILDENH completed (6093 rows) #20080429055123
(DB) INFO: ENHCOMPCHILDENH~1 created
(DB) INFO: ENHCOMPHEADER created
(DB) INFO: ENHCOMPHEADER~0 created
(IMP) INFO: import of ENHCOMPHEADER completed (135 rows) #20080429055130
(DB) INFO: ENHCONTRACTTOOL created
(DB) INFO: ENHCONTRACTTOOL~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of ENHCONTRACTTOOL completed (14 rows) #20080429055138
(DB) INFO: ENHCONTRACTTYP created
(DB) INFO: ENHCONTRACTTYP~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of ENHCONTRACTTYP completed (37 rows) #20080429055143
(DB) INFO: ENHDEPENDENT created
(DB) INFO: ENHDEPENDENT~0 created
(IMP) INFO: import of ENHDEPENDENT completed (0 rows) #20080429055148
(DB) INFO: ENHDEPENDENT~001 created
(DB) INFO: ENHHEADER created
(DB) INFO: ENHHEADER~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of ENHHEADER completed (6377 rows) #20080429055356
(DB) INFO: ENHHEADER~001 created
(DB) INFO: ENHHEADER~002 created
(DB) INFO: ENHLOADINVAL created
(DB) INFO: ENHLOADINVAL~0 created
(IMP) INFO: import of ENHLOADINVAL completed (1013 rows) #20080429055400
(DB) INFO: ENHLOG created
(DB) INFO: ENHLOG~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of ENHLOG completed (12535 rows) #20080429055413
(DB) INFO: ENHLOG~001 created
(DB) INFO: ENHLOG~002 created
(DB) INFO: ENHOBJ created
(DB) INFO: ENHOBJ~0 created
(IMP) INFO: import of ENHOBJ completed (13763 rows) #20080429055420
(DB) INFO: ENHOBJ~001 created
(DB) INFO: ENHOBJ~002 created
(DB) INFO: ENHOBJ~003 created
(DB) INFO: ENHOBJ~004 created
(DB) INFO: ENHOBJCONTRACT created
(DB) INFO: ENHOBJCONTRACT~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of ENHOBJCONTRACT completed (13 rows) #20080429055430
(DB) INFO: ENHOBJCONTRACT~001 created
(DB) INFO: ENHSPOTCOMPCOMP created
(DB) INFO: ENHSPOTCOMPCOMP~0 created
(IMP) INFO: import of ENHSPOTCOMPCOMP completed (58 rows) #20080429055432
(DB) INFO: ENHSPOTCOMPCOMP~1 created
(DB) INFO: ENHSPOTCOMPHEAD created
(DB) INFO: ENHSPOTCOMPHEAD~0 created
(IMP) INFO: import of ENHSPOTCOMPHEAD completed (791 rows) #20080429055435
(DB) INFO: ENHSPOTCOMPSPOT created
(DB) INFO: ENHSPOTCOMPSPOT~0 created
(IMP) INFO: import of ENHSPOTCOMPSPOT completed (3495 rows) #20080429055436
(DB) INFO: ENHSPOTCOMPSPOT~1 created
(DB) INFO: ENHSPOTCONTRACT created
(DB) INFO: ENHSPOTCONTRACT~0 created
(IMP) INFO: import of ENHSPOTCONTRACT completed (0 rows) #20080429055437
(DB) INFO: ENHSPOTCONTRACT~1 created
(DB) INFO: ENHSPOTHEADER created
(DB) INFO: ENHSPOTHEADER~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of ENHSPOTHEADER completed (4078 rows) #20080429055500
(DB) INFO: ENHSPOTOBJ created
(DB) INFO: ENHSPOTOBJ~0 created
(IMP) INFO: import of ENHSPOTOBJ completed (13111 rows) #20080429055513
(DB) INFO: ENHSPOTOBJ~001 created
(DB) INFO: ENHSPOTOBJ~002 created
(DB) INFO: ENHSPOTTOOLS created
(DB) INFO: ENHSPOTTOOLS~0 created
(IMP) INFO: import of ENHSPOTTOOLS completed (2 rows) #20080429055521
(DB) INFO: ENHSPOTTOOLST created
(DB) INFO: ENHSPOTTOOLST~0 created
(IMP) INFO: import of ENHSPOTTOOLST completed (10 rows) #20080429055523
(DB) INFO: ENHTAB created
(DB) INFO: ENHTAB~0 created
(IMP) INFO: import of ENHTAB completed (0 rows) #20080429055531
(DB) INFO: ENHTAB~001 created
(DB) INFO: ENHTAB~002 created
(DB) INFO: ENHTAB~003 created
(DB) INFO: ENHTOOLS created
(DB) INFO: ENHTOOLS~0 created
(IMP) INFO: import of ENHTOOLS completed (6 rows) #20080429055535
(DB) INFO: ENHTOOLST created
(DB) INFO: ENHTOOLST~0 created
(IMP) INFO: import of ENHTOOLST completed (30 rows) #20080429055538
(DB) INFO: ENH_DY_FCODES created
(DB) INFO: ENH_DY_FCODES~0 created
(IMP) INFO: import of ENH_DY_FCODES completed (0 rows) #20080429055542
(DB) INFO: ENH_DY_GROUP created
(DB) INFO: ENH_DY_GROUP~0 created
(IMP) INFO: import of ENH_DY_GROUP completed (0 rows) #20080429055547
(DB) INFO: ENH_DY_SUBS created
(DB) INFO: ENH_DY_SUBS~0 created
(IMP) INFO: import of ENH_DY_SUBS completed (0 rows) #20080429055549
(DB) INFO: ENLFDIR created
(DB) INFO: ENLFDIR~0 created
(IMP) INFO: import of ENLFDIR completed (386514 rows) #20080429055745
(DB) INFO: ENLFDIR~1 created
(DB) INFO: EUDB created
(DB) INFO: EUDB~0 created
(IMP) INFO: import of EUDB completed (32179 rows) #20080429060351
(DB) INFO: EUGUITEXT created
(DB) INFO: EUGUITEXT~0 created
(IMP) INFO: import of EUGUITEXT completed (2556 rows) #20080429060455
(DB) INFO: EUOBJ created
(DB) INFO: EUOBJ~0 created
(IMP) INFO: import of EUOBJ completed (562 rows) #20080429060556
(DB) INFO: EUOBJEDIT created
(DB) INFO: EUOBJEDIT~0 created
(IMP) INFO: import of EUOBJEDIT completed (391 rows) #20080429061005
(DB) INFO: EUOBJT created
(DB) INFO: EUOBJT~0 created
(IMP) INFO: import of EUOBJT completed (5765 rows) #20080429061357
(DB) INFO: FUNCT created
(DB) INFO: FUNCT~0 created
(IMP) INFO: import of FUNCT completed (5158636 rows) #20080429065528
(DB) INFO: FUNCT~1 created
(DB) INFO: FUPARAREF created
(DB) INFO: FUPARAREF~0 created
(IMP) INFO: import of FUPARAREF completed (2895483 rows) #20080429071823
(DB) INFO: FUPARAREF~1 created
(DB) INFO: FUPARAREF~2 created
(DB) INFO: IADB2 created
(DB) INFO: IADB2~0 created
(IMP) INFO: import of IADB2 completed (20 rows) #20080429073358
(DB) INFO: IADB6 created
(DB) INFO: IADB6~0 created
(IMP) INFO: import of IADB6 completed (20 rows) #20080429073358
(DB) INFO: IAINF created
(DB) INFO: IAINF~0 created
(IMP) INFO: import of IAINF completed (24 rows) #20080429073359
(DB) INFO: IAMSS created
(DB) INFO: IAMSS~0 created
(IMP) INFO: import of IAMSS completed (0 rows) #20080429073359
(DB) INFO: IAORA created
(DB) INFO: IAORA~0 created
(IMP) INFO: import of IAORA completed (28 rows) #20080429073400
(DB) INFO: IGDB2 created
(DB) INFO: IGDB2~0 created
(IMP) INFO: import of IGDB2 completed (10 rows) #20080429073400
(DB) INFO: IGORA created
(DB) INFO: IGORA~0 created
(IMP) INFO: import of IGORA completed (15 rows) #20080429073401
(DB) INFO: INDTEXT created
(DB) INFO: INDTEXT~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of INDTEXT completed (1946227 rows) #20080429075332
(DB) INFO: LDBA created
(DB) INFO: LDBA~0 created
(IMP) INFO: import of LDBA completed (40 rows) #20080429075332
(DB) INFO: LDBB created
(DB) INFO: LDBB~0 created
(IMP) INFO: import of LDBB completed (0 rows) #20080429075333
(DB) INFO: LDBD created
(DB) INFO: LDBD~0 created
(IMP) INFO: import of LDBD completed (258 rows) #20080429075333
(DB) INFO: LDBH created
(DB) INFO: LDBH~0 created
(IMP) INFO: import of LDBH completed (49 rows) #20080429075334
(DB) INFO: LDBN created
(DB) INFO: LDBN~0 created
(IMP) INFO: import of LDBN completed (2235 rows) #20080429075334
(DB) INFO: LDBNT created
(DB) INFO: LDBNT~0 created
(IMP) INFO: import of LDBNT completed (50310 rows) #20080429075346
(DB) INFO: LDBQUAN created
(DB) INFO: LDBQUAN~0 created
(IMP) INFO: import of LDBQUAN completed (52 rows) #20080429075347
(DB) INFO: LDBT created
(DB) INFO: LDBT~0 created
(IMP) INFO: import of LDBT completed (5505 rows) #20080429075349
(DB) INFO: MACID created
(DB) INFO: MACID~0 created
(IMP) INFO: import of MACID completed (17 rows) #20080429075350
(DB) INFO: MACOB created
(DB) INFO: MACOB~0 created
(IMP) INFO: import of MACOB completed (215 rows) #20080429075351
(DB) INFO: MCUSREXITS created
(DB) INFO: MCUSREXITS~0 created
(IMP) INFO: import of MCUSREXITS completed (108 rows) #20080429075351
(DB) INFO: MSSPROCS created
(DB) INFO: MSSPROCS~0 created
(IMP) INFO: import of MSSPROCS completed (287 rows) #20080429075352
(DB) INFO: MSSSOURCE created
(DB) INFO: MSSSOURCE~0 created
(IMP) INFO: import of MSSSOURCE completed (45489 rows) #20080429075405
(DB) INFO: MSSSPVERS created
(DB) INFO: MSSSPVERS~0 created
(IMP) INFO: import of MSSSPVERS completed (2 rows) #20080429075406
(DB) INFO: MSSSTORAGE created
(DB) INFO: MSSSTORAGE~0 created
(IMP) INFO: import of MSSSTORAGE completed (1 rows) #20080429075407
(DB) INFO: NOTRA created
(DB) INFO: NOTRA~0 created
(IMP) INFO: import of NOTRA completed (192 rows) #20080429075408
(DB) INFO: PERMISSION created
(DB) INFO: PERMISSION~0 created
(IMP) INFO: import of PERMISSION completed (112356 rows) #20080429075431
(DB) INFO: PERMISSION~IF created
(DB) INFO: REPOSRC created
(DB) INFO: REPOSRC~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>Hi,
You have to re-run the failed R3load-import with -merge_bck option. This is necessary because the SAPSSEXC.TSK.BCK file remained
check Note 455195 - R3load: Use of TSK files
regards,
kaushal -
*** ERROR = CONNECT failed with SQL error '12154' after Oracle Upgrade
Hello Experts,
Recently I upgraded my oracle database from 11.2.0.3 to 11.2.0.4.The upgrade completed successfully but I am unable to start the instance.
R3trans -d failing with the error--
OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR
OCIServerAttach(OCI_DEFAULT) failed with SQL error 12154:
ORA-12154: TNS:could not resolve the connect identifier specified
OCIServerAttach(con=0, svc=069C1630): Error 12154 attaching new srv=069C17D0
OCIHandleFree(con=0): Server handle srv=069C17D0 freed.
server_detach(con=0, svc=069C1630; srv=NULL, stale=2)
OCIHandleFree(con=0): Service svc=069C1630 freed (i=1).
*** ERROR => CONNECT failed with SQL error '12154'
-->oci_get_errmsg (con=0, rc=12154)
OCIErrorGet() -> SQL error code: 12154; buflen=66
OCIErrorGet(): error text ->
ORA-12154: TNS:could not resolve the connect identifier specified
ocica() -> SQL error code 12154,12154
DbSlConnect(con=0) -> orc=12154, rc=99=DBSL_ERR_DB
***LOG BY2=>sql error 12154 performing CON
***LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified
I have checked listener is up and running properly.Entry is maintained in tnsnames.ora.
Also kernel is upgraded with latest path.Curent kernel version--742
Please suggest on the mentioned error.I am attaching the logs here.Thanks in advance.
Best Regards,
DebadityaHi Debadiya
Kindly check this SAP Notes
1204916 - Error: "ORA-12154" when connecting to Oracle from a Windows 64-bit platform
2153975 - Database connectivity fails with ORA-12154
556232 - Environment settings for R/3/Oracle on Windows
443867 - ORA-12154 Collective SAP note
BR
SS -
ERROR = CONNECT failed with sql error '12518'
Hi All,
OS Win 2003 - 32 Bit, Database - Oracle 10.2.0.2 , I am facing this from yesterday, suddenly SAP was done and when i am checking the logs it is not able to connect to the database.
I have checked the services for oracle - service was down, i have started the oracleService<SID> and also i have restarted the listener.. after this when i am trying to start the SAP through MMC again the problem is face.. and also the oracle service is stopped. when i tried starting the database from OS level it was giving me error like
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
again the Oracle service is stopped i am not getting why the oracle service is stopping..
dev_w*.log
Thu Apr 09 10:33:50 2009
M calling db_connect ...
C Prepending D:\usr\sap\SID\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@SID on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C
C Thu Apr 09 10:33:51 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@SM3 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Detaching from DB Server (con_hdl=0,svchp=05C89298,srvhp=05C9AB64)
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
B ***LOG BY2=> sql error 12518 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12518 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 16
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server hostname_SM3_01 on host tcs042619 (wp 16)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 09 10:33:51 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc16 7988) [dpnttool.c 327]
Any suggestions pls
MaheshHi Rohit,
when i check in the sqlnet.log
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SM2\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 04-SEP-2007 15:09:30
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
ns secondary err code: 0
nt main err code: 530
TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:32
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:46
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:27
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:29
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:26:38
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:15:43
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:17:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
This error occured when the oracle service was not started..
Mahesh.. -
How to troubleshoot runtime error (termination with short dump)
hi all,
i'm new comer on crm. and i got a problem when i accessed tx: segment builder (runtime error: termination with short dump).
i've tried to troubleshoot this problem by set the java2 SDK GUI path on the client side.but it still didn't work.then i tried to activate the automation trace (just perform the procedure which wrote down on error analysis), but i confused when tried to read the trace file and still didn't get the point. FYI, i 'm using sap logon 710 and SAP crm 5.0.
what i've should to do?
should i have to re install my sap logon?
i really need ur assistance!
best regards,
agungHi Agung,
Please refer the following SAP Note for your information:
<b>SAP Note: 990263</b>
Best Regards,
Johnny.
Reward with points if it helps. -
Client installation fails with error GetSSLCertificateContext failed with error 0x87d00281
Hi
Site is SCCM 2012 R2
I am pushing SCCM client manually to a Windows Server 2012 client and it is failing with below errors
GetSSLCertificateContext failed with error 0x87d00281
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
GetHttpRequestObjects failed for verb: 'GET', url: 'HTTPS://SCCMserver.GROUP.COM/CCM_Client/ccmsetup.cab'
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
DownloadFileByWinHTTP failed with error 0x87d00281
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
CcmSetup failed with error code 0x87d00281 ccmsetup
02/05/2015 12:04:11 AM 6476 (0x194C)
Please advice..0x87d00281 = "No certificate matching criteria specified"
Have you deployed proper client auth certs to the client?
Can you please post the entire relevant snippet of the log file? Starting with the first error code encountered is meaningless because now we can't see what happened before which is often the root cause of the issue culminating in the error message.
Have you deployed the proper server auth certs to the MP and DP?
Jason | http://blog.configmgrftw.com | @jasonsandys -
Hi,
SCCM 2012 R2 updates work fine. Only when I create an automatic deployment rule for Endpoint Protection definition updates, it has errors in the patchdownloader.log.
I already used the upddwnlodcfg.exe /bypassproxy but that didn't work (should I restart?).
Folders are there but content is not.
Downloading content for ContentID = 16784900, FileName = AM_Delta_Patch_1.165.995.0.exe. Software Updates Patch Downloader 1/2/2014 12:11:17 PM 3308 (0x0CEC)
HttpSendRequest failed 502 Software Updates Patch Downloader 1/2/2014 12:11:17 PM 5048 (0x13B8)
"Bypass proxy server for local addresses" setting may be disabled Software Updates Patch Downloader 1/2/2014 12:11:17 PM 5048 (0x13B8)
To enable the setting use: UpdDwnldCfg.exe /ByPassProxy Software Updates Patch Downloader 1/2/2014 12:11:17 PM 5048 (0x13B8)
Download http://wsus.ds.download.windowsupdate.com/msdownload/update/software/defu/2014/01/am_delta_patch_1.165.995.0_28c14f6ef7d54eb33f4be5b2c4f1a932fd2c6e71.exe to C:\windows\TEMP\CAB56A8.tmp returns 502 Software Updates Patch Downloader
1/2/2014 12:11:17 PM 5048 (0x13B8)
ERROR: DownloadContentFiles() failed with hr=0x800701f6 Software Updates Patch Downloader 1/2/2014 12:11:17 PM 3308 (0x0CEC)
Please advise.
J.
Jan Hoedt
Note: I CAN download the file manually using Internet Explorer: "http://wsus.ds.download.windowsupdate.com/msdownload/update/software/defu/2014/01/am_delta_patch_1.165.995.0_28c14f6ef7d54eb33f4be5b2c4f1a932fd2c6e71.exe"HTTP status 502 – the server, while acting as a gateway or proxy, received an invalid response from the upstream server it accessed in attempting to fulfill the request.
http://msdn2.microsoft.com/en-us/library/aa387293.aspx
When I implement a software updates/endpoint protection solution, I always configure the proxy to "whitelist" traffic between my site server and the MS updates sites. Whitelist = no scanning & no filtering.
In this way I can avoid these kinds of problems.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Hi,
I'm getting the error "CreateWinProcess failed with error 2 - The system cannot find the file specified" whenever I try to test an Air app within the Flash IDE.
This error even comes up with a new and empty project .fla file. I already updated the Air runtime and Flash to the latest version.
How to fix this problem? Any ideas welcome!
Thank you.I installed the update, but I'm sorry to say that it did not solve the problem
The error is still there as described by Master §ix and Daniel777
CreateWinProcess failed with error 2. The system cannot find the file specified.
It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
In this case, I can't use the simulator to test the applications,
thanks -
Error: OCIEnvCreate failed with return code -1
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanks
792208 wrote:
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanksif the connection request actually gets to the listener, then it will be logged.
If no record exists within listener.log file, then the root cause & solution are external to Oracle. -
Database primary installs just fine for Lync 2013 - however fails instantly when trying to install mirror DB to mirror SQL Server. The account has dull domain admin, Enterprise admins, and schema admins. Full access to the share as well. I
get the following error:
InstallMirrorDatabaseCmdlet.StartMirroring
4/7/2014 10:38:56 AM
Failed
└
Error: DsRoleGetPrimaryDomainInformation failed with error "6BA".
▼ Details
└ Type: CannotGetDomainInfoException
└ ► Stack Trace
└
at Microsoft.Rtc.Management.ADConnect.NativeHelpers.NativeHelper.GetPrimaryDomainInformation(String server)
at Microsoft.Rtc.Management.Deployment.MirrorUtils.GetSqlServerAccount(String server, String instanceName)
at Microsoft.Rtc.Management.Deployment.TopologyParser.PopulateDatabasesForSqlInstance(ISqlInstance sqlInstance)
at Microsoft.Rtc.Management.Deployment.TopologyParser.FindDatabasesForMachine(IMachine machine)
at Microsoft.Rtc.Management.Deployment.TopologyParser.FindDatabasesForFqdn()
at Microsoft.Rtc.Management.Deployment.TopologyParser.GetDbListToMirror()
at Microsoft.Rtc.Management.Deployment.TopologyParser.get_DbInfoList()
at Microsoft.Rtc.Management.Deployment.InstallMirrorDatabaseCmdlet.StartMirroring()
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)
4/7/2014 10:38:58 AM
Error
└
Error: An error occurred: "Microsoft.Rtc.Management.ADConnect.CannotGetDomainInfoException" "DsRoleGetPrimaryDomainInformation failed with error "6BA"."The issue could be a typo in the SQL server name or that the SQL server isn't allowing remote connections. If you run the Install-csmirrordatabase command from powershell you should see more details about the error.
Take a look at Doug Deitterick's blog: http://blogs.technet.com/b/dodeitte/archive/2013/03/05/issue-configuring-sql-mirroring-for-lync-server-2013-when-sql-witness-is-defined-but-not-available.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
Hello,
I am getting below ERROR while downloading the SCCM 2012 R2 prerequisite files. I have tried running the setupdl.exe command several times, everytime it proceeds with downloading 1 file and then fails with the same error.
INFO: Downloading http://go.microsoft.com/fwlink/?LinkID=316480 as Server_CSY.cab
ERROR: WinHttpReceiveResponse failed 80072ee2
ERROR: Download() failed with 0x80072EE2
Have already checked the proxy but this is still the same.0x80072EE2 = "The operation timed out"
There is no way to know why from the downloading side why it timed out. "Something" between the "downloader" and the Microsoft source is getting in the way of the communication and preventing the response from reaching the downloader.
If you have a proxy, that is a likely culprit, but it could certainly be other things. You'll need to do some investigation and discovery -- you may even have to communicate with the network folks or folks responsible for the proxy.
Jason | http://blog.configmgrftw.com | @jasonsandys
Maybe you are looking for
-
Hello, I am developing a mobile application where i need to do an XML to XSLT transformation on the mobile phone itself. I will store XML and XSLT file in mobile and want to see a WML or XHTML file in the browser. Is WTK supporting this? Does anybody
-
Weblogic.policy doesn't work
I always get the below exception output, when starting WebLogic Server with the weblogic.policy file. It seems to me, that I forgot something, but I don't know what. What am I doing wrong here? I did the following: 1. I added the folling property int
-
Interested in AppleTV- question
Hello all- My finace and I love iTunes but we both have different tastes in music sometimes. That being said our Powerbook HD has 23gb of music (no tv shows/ music videos!) and it is quickly growing. I understand you can stream and we would be intere
-
OC4J - PROBLEM 10g ( 9.0.4 ) - exception: ORA-01002
I have application perfectly running in the version 9ias (OC4J 9.0.3) when I migrated for 10g (OC4J 9.0.4) I obtained the following mistake stopping my application. exception: ORA-01002: fetch out of sequence Data of the application: EJB CMP
-
HT1695 I have no wifi address and wifi button greyed out not functioning
No wifi address and no wifi function button is visible but not responding iPhone 4S have tried network reset but still no change ... Appreciate your help Neeeeeeed wifi