Urgent..Dispatcher is stopping
Hi everyone..
In our organisation we have a test server..
I installed SAP 47 with oracle 8i on windows 2003 as OS after installation
MMC started fine i was able to log into the system.
after the i restarted the system..dispatcher is stopping and work processess
are ending..
and dev_w0 file showing an error:
ERROR => CONNECT failed with sql error '1017'
thank you
kiran kumar
Hi peter..
Peter i did install 8i on windows 2003 server and it was working fine..
This is happening pretty recently..
I am posting you the dev_wo file..
Starting user session (con_hdl=0,svchp=05FDACE8,srvhp=05FDAAF4,usrhp=06021FDC)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c 9536]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=05FDACE8,srvhp=05FDAAF4,usrhp=06021FDC)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c 9536]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
and when i check the event viewer logs in the windown\
Audit trail : 'startup'OS_AUTHENT_PREFIX:OPS$
Audit trail : 'startup'AUDIT_TRAIL:none
Audit trail : 'connect' osprive:dba client user:kiran\sapserviceDEV client
terminal:kiran status:succeeded(0).
thank you
kiran kumar
Similar Messages
-
Dear All,
I am facing a problem with IDES system. When I start the SAP from MMC console in windows 2003 with oracle database (ECC 5.0) the dispatcher gets stopped immediately after it tries to start the work process. All the work process ends up and dispatcher stops. But the message server and gateway service are still running.
Below the log of DEV_DISP and DEV_W0
DEV_DISP
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 07 20:13:35 2000
kernel runs with dp version 134(ext=102) (@(#) DPLIB-INT-VERSION-134)
length of sys_adm_ext is 312 bytes
sysno 01
sid DEV
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 175
intno 20020600
make: multithreaded, ASCII
pid 3048
***LOG Q00=> DpSapEnvInit, DPStart (01 3048) [dpxxdisp.c 1102]
shared lib "dw_xml.dll" version 175 successfully loaded
shared lib "dw_xtc.dll" version 175 successfully loaded
shared lib "dw_stl.dll" version 175 successfully loaded
shared lib "dw_gui.dll" version 175 successfully loaded
shared lib "dw_mdm.dll" version 175 successfully loaded
Mon Aug 07 20:13:40 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3896]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >MYS-705894_DEV_01 <
DpShMCreate: sizeof(wp_adm) 10768 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05640040, size: 2669600)
DpShMCreate: allocated sys_adm at 05640040
DpShMCreate: allocated wp_adm at 056417D8
DpShMCreate: allocated tm_adm_list at 056441E8
DpShMCreate: allocated tm_adm at 05644210
DpShMCreate: allocated wp_ca_adm at 05889250
DpShMCreate: allocated appc_ca_adm at 0588D8A0
DpShMCreate: allocated comm_adm_list at 0588F010
DpShMCreate: allocated comm_adm at 0588F028
DpShMCreate: allocated vmc_adm_list at 058BDE28
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 058BDE50
DpShMCreate: allocated wall_adm at 058BDE58
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1222 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MYS-705894) [dpxxdisp.c 10051]
DpStartStopMsg: send start message (myname is >MYS-705894_DEV_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 175
Release check o.K.
Mon Aug 07 20:14:20 2000
ERROR => W0 (pid 4420) died [dpxxdisp.c 12577]
ERROR => W1 (pid 4200) died [dpxxdisp.c 12577]
ERROR => W2 (pid 4408) died [dpxxdisp.c 12577]
ERROR => W3 (pid 4264) died [dpxxdisp.c 12577]
ERROR => W4 (pid 4504) died [dpxxdisp.c 12577]
ERROR => W5 (pid 4508) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1500) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 4516) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 1116) died [dpxxdisp.c 12577]
ERROR => W9 (pid 4524) died [dpxxdisp.c 12577]
ERROR => W10 (pid 832) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4548) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4556) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-4420 (SIGUSR2)
ERROR => DpWpKill(4420, SIGUSR2) failed [dpxxtool.c 2507]
killing W1-4200 (SIGUSR2)
ERROR => DpWpKill(4200, SIGUSR2) failed [dpxxtool.c 2507]
killing W2-4408 (SIGUSR2)
ERROR => DpWpKill(4408, SIGUSR2) failed [dpxxtool.c 2507]
killing W3-4264 (SIGUSR2)
ERROR => DpWpKill(4264, SIGUSR2) failed [dpxxtool.c 2507]
killing W4-4504 (SIGUSR2)
ERROR => DpWpKill(4504, SIGUSR2) failed [dpxxtool.c 2507]
killing W5-4508 (SIGUSR2)
ERROR => DpWpKill(4508, SIGUSR2) failed [dpxxtool.c 2507]
killing W6-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2507]
killing W7-4516 (SIGUSR2)
ERROR => DpWpKill(4516, SIGUSR2) failed [dpxxtool.c 2507]
killing W8-1116 (SIGUSR2)
ERROR => DpWpKill(1116, SIGUSR2) failed [dpxxtool.c 2507]
killing W9-4524 (SIGUSR2)
ERROR => DpWpKill(4524, SIGUSR2) failed [dpxxtool.c 2507]
killing W10-832 (SIGUSR2)
ERROR => DpWpKill(832, SIGUSR2) failed [dpxxtool.c 2507]
killing W11-4548 (SIGUSR2)
ERROR => DpWpKill(4548, SIGUSR2) failed [dpxxtool.c 2507]
killing W12-4556 (SIGUSR2)
ERROR => DpWpKill(4556, SIGUSR2) failed [dpxxtool.c 2507]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:30 2000
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 07 14:44:30 2000
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4420 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 4408 Ended no 1 0 0
3 DIA 4264 Ended no 1 0 0
4 DIA 4504 Ended no 1 0 0
5 DIA 4508 Ended no 1 0 0
6 UPD 1500 Ended no 1 0 0
7 ENQ 4516 Ended no 1 0 0
8 BTC 1116 Ended no 1 0 0
9 BTC 4524 Ended no 1 0 0
10 BTC 832 Ended no 1 0 0
11 SPO 4548 Ended no 1 0 0
12 UP2 4556 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 07 14:44:30 2000
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Aug 07 14:44:30 2000
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , MYS-705894, 20:14:03, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Aug 07 14:44:30 2000
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:35 2000
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >MYS-705894_DEV_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (4380) (SOFT_KILL)
Stop icman
killing process (5532) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1516
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 965659480
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:4380 HANDLE:1636)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:36 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:4380 HANDLE:1636)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:37 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:38 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:39 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:40 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:41 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:42 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:43 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:44 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:45 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:46 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:5532 HANDLE:1644)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >MYS-705894_DEV_01 <)
NiIMyHostName: hostname = 'MYS-705894'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 3 / socket 1576 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Mon Aug 07 20:14:47 2000
NiIPeek: peek for hdl 3 / socket 1576 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10308]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1576
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3048) [dpxxdisp.c 8766]
Good Bye .....
DEV_W0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Aug 07 20:13:40 2000
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4484]
M sysno 01
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 175
M intno 20020600
M make: multithreaded, ASCII
M pid 4420
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4420) [dpxxdisp.c 1162]
I
I Mon Aug 07 20:13:41 2000
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 10768 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05E40040, size: 2669600)
M DpShMCreate: allocated sys_adm at 05E40040
M DpShMCreate: allocated wp_adm at 05E417D8
M DpShMCreate: allocated tm_adm_list at 05E441E8
M DpShMCreate: allocated tm_adm at 05E44210
M DpShMCreate: allocated wp_ca_adm at 06089250
M DpShMCreate: allocated appc_ca_adm at 0608D8A0
M DpShMCreate: allocated comm_adm_list at 0608F010
M DpShMCreate: allocated comm_adm at 0608F028
M DpShMCreate: allocated vmc_adm_list at 060BDE28
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060BDE50
M DpShMCreate: allocated wall_adm at 060BDE58
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Aug 07 20:13:42 2000
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4484]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1281]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9595]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server MYS-705894_DEV_01 on host MYS-705894 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Aug 07 20:13:42 2000
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9780
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4420) [dpnttool.c 357]
Please some one suggest me how to go about it.Dear All,
Thanks for u r valuable suggestions and it helped a bit, but still my IDES is down and here I am attaching the latest DEV_W0. Please help me out.....
DEV_W0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Aug 11 19:54:35 2000
B create_con (con_name=R/3)
B Loading DB library 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.55)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 10
M intno 20020600
M make: multithreaded, ASCII
M pid 2980
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2980) [dpxxdisp.c 1153]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M
M Fri Aug 11 19:54:36 2000
M DpShMCreate: sizeof(wp_adm) 9936 (828)
M DpShMCreate: sizeof(tm_adm) 2083168 (10364)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F40040, size: 2372048)
M DpShMCreate: allocated sys_adm at 04F40040
M DpShMCreate: allocated wp_adm at 04F417A8
M DpShMCreate: allocated tm_adm_list at 04F43E78
M DpShMCreate: allocated tm_adm at 04F43EA0
M DpShMCreate: allocated wp_ca_adm at 05140800
M DpShMCreate: allocated appc_ca_adm at 05144E50
M DpShMCreate: allocated comm_adm_list at 051465C0
M DpShMCreate: allocated comm_adm at 051465D8
M DpShMCreate: allocated vmc_adm_list at 051753D8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05175400
M DpShMCreate: allocated wall_adm at 05175408
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=H:\oracle9i\bin from environment
C
C Fri Aug 11 19:54:37 2000
C Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ...
C Nls Characterset Natcharacterset C EnvHp ErrHp ErrHpBatch
C 0 1 0357EF98 077DB2A8 077DAD10
C Attaching to DB Server DEV (con_hdl=0,svchp=077DAC64,svrhp=035835B4)
C
C Fri Aug 11 19:55:04 2000
C Starting user session (con_hdl=0,svchp=077DAC64,srvhp=035835B4,usrhp=0358BDC8)
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 10256]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=077DAC64,usrhp=0358BDC8)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPR3/<pwd>@DEV on connection 0 (nls_hdl 0) ...
C Nls Characterset Natcharacterset C EnvHp ErrHp ErrHpBatch
C 0 1 0357EF98 077DB2A8 077DAD10
C Starting user session (con_hdl=0,svchp=077DAC64,srvhp=035835B4,usrhp=0358BDC8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4176]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 9891]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1270]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9377]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server MYS-705894_DEV_01 on host MYS-705894 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Aug 11 19:55:04 2000
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9553
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 728]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 245]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2980) [dpnttool.c 357]
DEV_DISP
trc file: "dev_disp", trc level: 1, release: "640"
Fri Aug 11 19:54:29 2000
kernel runs with dp version 127(ext=102) (@(#) DPLIB-INT-VERSION-127)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 10
intno 20020600
make: multithreaded, ASCII
pid 2776
***LOG Q00=> DpSapEnvInit, DPStart (01 2776) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 10 successfully loaded
shared lib "dw_xtc.dll" version 10 successfully loaded
shared lib "dw_stl.dll" version 10 successfully loaded
shared lib "dw_gui.dll" version 10 successfully loaded
Fri Aug 11 19:54:34 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3880]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 9936 (828)
DpShMCreate: sizeof(tm_adm) 2083168 (10364)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04680040, size: 2372048)
DpShMCreate: allocated sys_adm at 04680040
DpShMCreate: allocated wp_adm at 046817A8
DpShMCreate: allocated tm_adm_list at 04683E78
DpShMCreate: allocated tm_adm at 04683EA0
DpShMCreate: allocated wp_ca_adm at 04880800
DpShMCreate: allocated appc_ca_adm at 04884E50
DpShMCreate: allocated comm_adm_list at 048865C0
DpShMCreate: allocated comm_adm at 048865D8
DpShMCreate: allocated vmc_adm_list at 048B53D8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 048B5400
DpShMCreate: allocated wall_adm at 048B5408
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1223 MB
<ES> 1222 blocks reserved for free list.
ES initialized.
Fri Aug 11 19:54:35 2000
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MYS-705894) [dpxxdisp.c 9701]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 10
Release check o.K.
Fri Aug 11 19:55:15 2000
ERROR => W0 (pid 2980) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3280) died [dpxxdisp.c 12152]
ERROR => W2 (pid 1392) died [dpxxdisp.c 12152]
ERROR => W3 (pid 2800) died [dpxxdisp.c 12152]
ERROR => W4 (pid 3392) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W5 (pid 3456) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W6 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W7 (pid 2880) died [dpxxdisp.c 12152]
ERROR => W8 (pid 4000) died [dpxxdisp.c 12152]
ERROR => W9 (pid 3160) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W10 (pid 3424) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W11 (pid 3048) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2980 (SIGUSR2)
ERROR => DpWpKill(2980, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-1392 (SIGUSR2)
ERROR => DpWpKill(1392, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2800 (SIGUSR2)
ERROR => DpWpKill(2800, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3392 (SIGUSR2)
ERROR => DpWpKill(3392, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3456 (SIGUSR2)
ERROR => DpWpKill(3456, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2880 (SIGUSR2)
ERROR => DpWpKill(2880, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-4000 (SIGUSR2)
ERROR => DpWpKill(4000, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-3160 (SIGUSR2)
ERROR => DpWpKill(3160, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-3424 (SIGUSR2)
ERROR => DpWpKill(3424, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-3048 (SIGUSR2)
ERROR => DpWpKill(3048, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:25 2000
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Aug 11 14:25:25 2000
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2980 Ended no 1 0 0
1 DIA 3280 Ended no 1 0 0
2 DIA 1392 Ended no 1 0 0
3 DIA 2800 Ended no 1 0 0
4 DIA 3392 Ended no 1 0 0
5 UPD 3456 Ended no 1 0 0
6 ENQ 3232 Ended no 1 0 0
7 BTC 2880 Ended no 1 0 0
8 BTC 4000 Ended no 1 0 0
9 BTC 3160 Ended no 1 0 0
10 SPO 3424 Ended no 1 0 0
11 UP2 3048 Ended no 1 0 0
Dispatcher Queue Statistics Fri Aug 11 14:25:25 2000
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Fri Aug 11 14:25:25 2000
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Aug 11 14:25:25 2000
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:30 2000
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3060) (SOFT_KILL)
Stop icman
killing process (436) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3060 HANDLE:1668)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:31 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3060 HANDLE:1668)
[DpProcDied] Process died (PID:436 HANDLE:1660)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'MYS-705894'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1676
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2776) [dpxxdisp.c 8460]
Good Bye ..... -
Solution Manager's Dispatcher is STOP.
Hi Experts,
I have installed Solution manager successfully on windows 2003.
On the same Server I have successfully installed ERP 2005.Now Solution manager's Dispatcher is STOP,where ERP 2005 is running successfully. If anybody know the solution please help me out.
Points would be rewarded for the same.
Thanks n Regards
Ajit KeshriHi Markus
Here is log dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 21 15:15:01 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'E:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'E:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 5372
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5372) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Apr 21 15:15:02 2008
M DpShMCreate: sizeof(wp_adm) 8880 (1480)
M DpShMCreate: sizeof(tm_adm) 5584592 (27784)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F270050, size: 6264768)
M DpShMCreate: allocated sys_adm at 000000000F270050
M DpShMCreate: allocated wp_adm at 000000000F272150
M DpShMCreate: allocated tm_adm_list at 000000000F274400
M DpShMCreate: allocated tm_adm at 000000000F274460
M DpShMCreate: allocated wp_ca_adm at 000000000F7C7B30
M DpShMCreate: allocated appc_ca_adm at 000000000F7CD8F0
M DpShMCreate: allocated comm_adm at 000000000F7CF830
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F8564C0
M DpShMCreate: allocated gw_adm at 000000000F856540
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F856570
M DpShMCreate: allocated wall_adm at 000000000F856580
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host visu1
M
M Mon Apr 21 15:15:03 2008
M calling db_connect ...
C Prepending E:\usr\sap\DEV\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138620C0 00000000081DB600 00000000081DCE28
C Attaching to DB Server DEV (con_hdl=0,svchp=00000000081DCCE8,svrhp=0000000013881118)
C Starting user session (con_hdl=0,svchp=00000000081DCCE8,srvhp=0000000013881118,usrhp=00000000081DBE18)
C
C Mon Apr 21 15:15:04 2008
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 11295]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=00000000081DCCE8,usrhp=00000000081DBE18)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138620C0 00000000081DB600 00000000081DCE28
C Starting user session (con_hdl=0,svchp=00000000081DCCE8,srvhp=0000000013881118,usrhp=00000000081DBE18)
C Now 'SAPSR3/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance DEV is running on VISU1 with ORACLE version 10.2.0.1.0 since 20080421
B
B Mon Apr 21 15:15:05 2008
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080421 151502 VISU1
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Apr 21 15:15:14 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000016100050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3290050, size: 61440000)
M SHM_PAGING_AREA (addr: 0000000016540050, size: 32768000)
M SHM_ROLL_ADM (addr: 000000000B1C0050, size: 615040)
M SHM_PAGING_ADM (addr: 000000000FE00050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000000FE90050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000FF20050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 6, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001D920160, size: 30000000, end: 000000001F5BC4E0)
B dbtbxbuf: Buffer TABLP (addr: 000000001F5C0160, size: 10240000, end: 000000001FF84160)
B dbexpbuf: Buffer EIBUF (addr: 000000001FF90170, size: 4194304, end: 0000000020390170)
B dbexpbuf: Buffer ESM (addr: 00000000203A0170, size: 4194304, end: 00000000207A0170)
B dbexpbuf: Buffer CUA (addr: 00000000207B0170, size: 3072000, end: 0000000020A9E170)
B dbexpbuf: Buffer OTR (addr: 0000000020AA0170, size: 4194304, end: 0000000020EA0170)
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
B
B Mon Apr 21 15:15:15 2008
B ***LOG BZA=> table APSRV does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B Didn't get a server group from table APSRV, rc = 32
B ***LOG BZA=> table TBTCO does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
L *** ERROR => BtcMrkZombies: db_rsql-call failed, rc: 32 [btcclean.c 572]
B
B Mon Apr 21 15:15:16 2008
B ***LOG BZA=> table USR41 does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1160, total = 3064
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 000000000AF10050
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 000000000AF107C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 000000000AF10800
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 000000000AF1080C
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=E:\usr\sap\DEV\DVEBMGS00\sec, AS=visu1, instanceid=00)
B ***LOG BZA=> table SSF_PSE_H does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
N *** ERROR => SsfPseLoad: db_rsql94 - RS_FETCH on SSF_PSE_H failed with rc=32 [ssfxxpse.c 767]
N SsfPseLoad: ended (0 of 0 sucessfully loaded, 0 checked...
B ***LOG BZA=> table CVERS does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B *** ERROR => Buffer loading failed: {fcode=225, rc=32, cnt=0, table='CVERS'}
[dbrsbuf.c 1784]
B ***LOG BZA=> table CVERS does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table T002C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table T002 does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B *** ERROR => Buffer loading failed: {fcode=225, rc=32, cnt=0, table='T002'}
[dbrsbuf.c 1784]
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
B ***LOG BZA=> table PATCHHIST does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for E:\usr\sap\DEV\DVEBMGS00\log\ALMTTREE.DAT (219 MTEs).
B
B Mon Apr 21 15:15:17 2008
B ***LOG BZA=> table TCP00 does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
G Codepage converter switched to reinitialize state.
M ***LOG R19=> ThInit, rscpi_init ( codepages 000008) [thxxhead.c 1741]
M *** ERROR => .--============--
. [thxxhead.c 910]
M *** ERROR => | RSCP - Error | [thxxhead.c 910]
M *** ERROR => | Error from: Codepage handling (RSCP) | [thxxhead.c 910]
M *** ERROR => | code: 8 RSCPEIO Some I/O error. | [thxxhead.c 910]
M *** ERROR => | Codepage converter switched to reinitialize state. | [thxxhead.c 910]
M *** ERROR => | module: rscpmc no: 133 line: 1355 T100: TS004 | [thxxhead.c 910]
M *** ERROR => | TSL01: CQD | [thxxhead.c 910]
M *** ERROR => `----
' [thxxhead.c 910]
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000013A97C00
S
S Mon Apr 21 15:15:18 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002A1C00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002A1C02F0
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: # fragments > # work processes => using less fragments
A System page size: 4kb, total admin_size: 5432kb, dir_size: 5404kb.
A Attached to PXA (address 000007FFF6D30050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
B ***LOG BZA=> table SRTM_ACT does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
A ***Error in abrtm.c: DB-Error 32 opening table SRTM_ACT.
A ABAP ShmAdm initialized (addr=000007FF4FF13000 leng=20955136 end=000007FF5130F000)
A >> Shm MMADM area (addr=000007FF503ECDB0 leng=244096 end=000007FF50428730)
A >> Shm MMDAT area (addr=000007FF50429000 leng=15622144 end=000007FF5130F000)
A RFC Destination> destination visu1_DEV_00 host visu1 system DEV systnr 0 (visu1_DEV_00)
A RFC Options> H=visu1,S=00,d=2,
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
B ***LOG BZA=> table CVERS does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A *** ERROR => No hotpackage number found [abload3.c 14145]
B ***LOG BZA=> table CVERS1 does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B *** ERROR => Buffer loading failed: {fcode=225, rc=32, cnt=0, table='CVERS1'}
[dbrsbuf.c 1784]
B ***LOG BZA=> table CVERS1 does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A *** ERROR => isSubReleaseActive: unexpected code from db_setget: 2 [abload3.c 13997]
M ThrCreateShObjects allocated 6352 bytes at 000000000FFD0050
M
M Mon Apr 21 15:15:19 2008
M ThVBStartUp: restart pending update requests
B ***LOG BZA=> table V_LNAMES does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B Couldn't read table V_LNAMES, rc = 32
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBMarkOldRq: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 12316]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBSearchEntries: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 9908]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBSearchEntries: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 9908]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBSearchEntries: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 9908]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBSearchEntries: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 9908]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBMark: db_rsql(RS_FETCH) failed, rc: 32 [thxxvb.c 4916]
N SsfSapSecin: putenv(SECUDIR=E:\usr\sap\DEV\DVEBMGS00\sec): ok
N SsfSapSecin: PSE E:\usr\sap\DEV\DVEBMGS00\sec\SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is E:\usr\sap\DEV\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B ***LOG BZA=> table IACFL does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.111.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [14]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume visu1_DEV_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >visu1_DEV_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 21.04.2008 15:15:19 1208771119 / 4560
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 21.04.2008 15:15:19 1208771119 / 2
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 21.04.2008 15:15:19 1208771119 / 1
E Status: STATUS_OK
E -
B ***LOG BZA=> table TSPSVI does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
S *** ERROR => -
> db_rtab Error 2, table TSPSVI, action rspogdio_update [rspogdio.c 424]
B ***LOG BZA=> table TSPSVI does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
S *** ERROR => -
> db_rtab Error 2, table TSPSVI, action rspogdio_insert [rspogdio.c 424]
B ***LOG BZA=> table TSPSV does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
S *** ERROR => -
> db_rtab Error 2, table TSPSV, action rspogdio_read [rspogdio.c 424]
B ***LOG BZA=> table TSPSVI does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
S *** ERROR => -
> db_rtab Error 2, table TSPSVI, action rspogdio_read [rspogdio.c 424]
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <visu1_DEV_00 >
L BtcSysStartRaise: End
B
B Mon Apr 21 15:15:21 2008
B ***LOG BZA=> table TCP0C does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B *** ERROR => Buffer loading failed: {fcode=225, rc=32, cnt=0, table='TCP0C'}
[dbrsbuf.c 1784]
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Apr 21 15:15:22 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:22 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:22 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error DBIF_RTAB_ILLEGAL_CALL occured. P1=[RTAB/RD /TCP0C ] P2=TCP0C .
A
S
S Mon Apr 21 15:15:23 2008
S server @>SSRV:visu1_DEV_00@< appears or changes (state 1)
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:23 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error DBIF_RTAB_ILLEGAL_CALL occured. P1=[RTAB/RD /TCP0C ] P2=TCP0C .
A
S server @>SSRV:visu1_DEV_00@< appears or changes (state 1)
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:23 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:23 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
S
S Mon Apr 21 15:15:41 2008
S server @>SSRV:visu1_DEV_00@< appears or changes (state 1)
S server @>SSRV:visu1_DEV_00@< appears or changes (state 1)
B
B Mon Apr 21 15:16:11 2008
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:16:11 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
B
B Mon Apr 21 15:16:21 2008
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:16:21 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error DBIF_RTAB_ILLEGAL_CALL occured. P1=[RTAB/RD /TCP0C ] P2=TCP0C .
A
B
B Mon Apr 21 15:17:11 2008
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:17:11 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
B
B Mon Apr 21 15:17:21 2008
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 527] [dbsynseq0527 ]
B ***LOG BZY=> unexpected return code 2 calling sync_read [dbsync#4 @ 2176] [dbsync 2176 ]
B *** ERROR => collect_new : unexpected returncode 512
[dbsync.c 1222]
B ***LOG BZY=> unexpected return code 103 calling DbSlBegRea [dbsynseq#1 @ 426] [dbsynseq0426 ]
M *** ERROR => ThExeDdlog: db_clean_ddlog [thxxtool.c 1981]
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:17:21 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed. -
SAP Dispatcher getting stopped after successful DB restore sql server 2005
Dear Experts,
I have installed SAP ECC 6.0 with MSS 2005 on Windows 2003 x64. MSS DB and thereafter
SAP installtion was successful. I also logged on the system and checked a few things. Then we
performed a PRD data DB restore using MSS Management Studio and DB restore completed successfully.
Then we take a restart and tried to start SAP. Primarily I found it is starting and then when it come Dispatcher
getting stopped once i restarted the server also I tried with r3trans -d and its not executing please check the developer trace
and my server work directory in zip format attached please check the attachment
please help me to sort out this issue
Best Regards
SURESH .M
SAP BASIS CONSULTANTHi deepak ,
please check the trans log iam attached
r3trans -d getting return code 0012
please check it
4 ETW000 r3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 19.06.2014 - 16:57:13
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Jun 19 16:57:15 2014 41662 0.041662
4 ETW000 [dev trc ,00000] db_con_init called 142 0.041804
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 181 0.041985
4 ETW000 [dev trc ,00000] Loading DB library 'dbmssslib.dll' ... 138 0.042123
4 ETW000 [dev trc ,00000] load shared library (dbmssslib.dll), hdl 0 47141 0.089264
4 ETW000 [dev trc ,00000] using "D:\usr\sap\PRD\SYS\exe\uc\NTAMD64\dbmssslib.dll"
4 ETW000 130 0.089394
4 ETW000 [dev trc ,00000] Library 'dbmssslib.dll' loaded 40 0.089434
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbmssslib.dll
4 ETW000 63 0.089497
4 ETW000 [dev trc ,00000] Version of 'dbmssslib.dll' is "700.08", patchlevel (0.72)
4 ETW000 28593 0.118090
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbmssslib.dll
4 ETW000 75 0.118165
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbmssslib.dll
4 ETW000 70 0.118235
4 ETW000 [dev trc ,00000] New connection 0 created 11925 0.130160
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 163 0.130323
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 56 0.130379
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 60 0.130439
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 74 0.130513
4 ETW000 [dev trc ,00000] Thread ID:2196 16796 0.147309
4 ETW000 [dev trc ,00000] Thank You for using the SLOLEDB-interface 54 0.147363
4 ETW000 [dev trc ,00000] Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\uc\NTAMD64\dbmssslib.dll'
4 ETW000 76 0.147439
4 ETW000 [dev trc ,00000] dbmssslib.dll patch info 84 0.147523
4 ETW000 [dev trc ,00000] patchlevel 0 37 0.147560
4 ETW000 [dev trc ,00000] patchno 72 30 0.147590
4 ETW000 [dev trc ,00000] patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
4 ETW000 54 0.147644
4 ETW000 [dev trc ,00000] np:(local) connection used on PSPRD1 195 0.147839
4 ETW000 [dev trc ,00000] CopyLocalParameters: dbuser is 'prd' 44 0.147883
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 46841 0.194724
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 419 0.195143
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 121982 0.317125
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 211 0.317336
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 168 0.317504
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 38 0.317542
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 68 0.317610
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 6271 0.323881
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 215 0.324096
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 8723 0.332819
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 122 0.332941
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 141 0.333082
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 37 0.333119
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 53 0.333172
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 6308 0.339480
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 209 0.339689
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 8393 0.348082
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 122 0.348204
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 286 0.348490
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 42 0.348532
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 55 0.348587
4 ETW000 [dev trc ,00000] failed to establish conn to np:(local). 6478 0.355065
4 ETW000 [dev trc ,00000] Retrying without protocol specifier: (local) 49 0.355114
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 123 0.355237
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 214 0.355451
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 14045 0.369496
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 128 0.369624
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 141 0.369765
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 38 0.369803
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 53 0.369856
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 886 0.370742
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 226 0.370968
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 8706 0.379674
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 122 0.379796
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 145 0.379941
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 37 0.379978
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 53 0.380031
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 6315 0.386346
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 229 0.386575
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 8701 0.395276
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 122 0.395398
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 144 0.395542
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 34 0.395576
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 53 0.395629
4 ETW000 [dev trc ,00000] failed to establish conn. 0 6497 0.402126
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 0 performing CON [dblink#3 @ 431]
4 ETW000 11973 0.414099
4 ETW000 [dblink ,00431] ***LOG BY0=><message text not available> [dblink#3 @ 431]
4 ETW000 55 0.414154
2EETW169 no connect possible: "DBMS = MSSQL --- SERVER = 'PSPRD1' DBNAME = 'PRD'"
Best regards
suresh -
Hello Experts,
Im using Netweaver 2004, Dispatcher was not running wht is the reasionHi,
Please review the files
dev_dispatcher, std_dispatcher.out from the work directory and defaultTrace.X.trc from the dispatcher/log directory.
In my experience most often the reason the dispatcher doesn't start is that some of the ports that it uses are used by some other process or they were not released by the OS the last time the dispatcher was restarted.
Check if when the dispatcher is stopped the HTTP and the p4 ports are still open.
You could use OS command to list the open ports
netstat -an
Regards,
Ventsi Tsachev -
DISPATCHER IS STOPPED IN VISUAL ADMINISTRATOR
Hi Experts,
<b> when I opened the VISUAL Administrator in SAP XI, its showing RED state
( STOPPED). Can any one pls help me how to enable the dispatcher so that it will again come to Green and running mode.</b>
Thanks in Advance,
Sunil K ShettyHi,
Thanks for the kind reply, In MMC the status of Dispatcher is "Stopped" and also
the details in MMC is as follows:
Process description status
strdbs.cmd database stopped
disp+work.exe dispatcher stopped
thanks in advance
Suneee -
Dispatcher getting stopped due to possible user/schema mismatch.Plz help
Hello All,
I have SAP Netweaver 7.01 ABAP AS installed on windows 2003. Was working fine but I had to have a bug fixed in win 2003 and restarted my SAP machine. Now, dispatcher is not running. Stops after a while. I have tried restarting SAP and the machine but dispatcher is not running. I looked at the dispatcher trace and dev_w0 but could not figure out the reason as I am new to SAP, please provide any pointers to solve this issue. Any general tips is also welcome. Timely help is greatly appreciated!
I have pasted parts of dev_disp and dev_w0 below. If you require more details, please let me know. Thank you very much!
-Arvind
dev_disp:
=========
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 29
intno 20020600
make: multithreaded, Unicode, optimized
pid 3784
Fri Jun 10 19:25:12 2011
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3784) [dpxxdisp.c 1261]
shared lib "dw_xml.dll" version 29 successfully loaded
shared lib "dw_xtc.dll" version 29 successfully loaded
shared lib "dw_stl.dll" version 29 successfully loaded
shared lib "dw_gui.dll" version 29 successfully loaded
shared lib "dw_mdm.dll" version 29 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Jun 10 19:25:18 2011
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >egsap701_NSP_00 <
DpShMCreate: sizeof(wp_adm) 13632 (1704)
DpShMCreate: sizeof(tm_adm) 4415616 (21968)
DpShMCreate: sizeof(wp_ca_adm) 1664 (80)
DpShMCreate: sizeof(appc_ca_adm) 1600 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07050040, size: 5042120)
DpShMCreate: allocated sys_adm at 07050040
DpShMCreate: allocated wp_adm at 07052170
DpShMCreate: allocated tm_adm_list at 070556B0
DpShMCreate: allocated tm_adm at 070556E0
DpShMCreate: allocated wp_ca_adm at 0748B760
DpShMCreate: allocated appc_ca_adm at 0748BDE0
DpShMCreate: allocated comm_adm at 0748C420
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0750D2E0
DpShMCreate: allocated gw_adm at 0750D320
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0750D350
DpShMCreate: allocated wall_adm at 0750D358
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
*** ERROR => ztta/cua_area is 180000. [sapinit.c 975]
*** ERROR => ztta/cua_area adjusted to 500000. [sapinit.c 979]
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( egsap701) [dpxxdisp.c 12362]
DpStartStopMsg: send start message (myname is >egsap701_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 29
Release check o.K.
Fri Jun 10 19:25:58 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1565
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 10 19:26:08 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Workprocess Comm. Area Blocks Fri Jun 10 13:56:08 2011
=============================
Slots: 20, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
<SNIP>
[DpProcDied] Process died (PID:3492 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >egsap701_NSP_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=egsap701_NSP_00 , sapsysnr= 0, hostname=egsap701
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
<SNIP>
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1496
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3784) [dpxxdisp.c 10924]
Good Bye .....
dev_w0
========
trc file: "dev_w0", trc level: 1, release: "701"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Jun 10 19:25:18 2011
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 29
M intno 20020600
M make: multithreaded, Unicode, optimized
M pid 2768
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2768) [dpxxdisp.c 1323]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 13632 (1704)
M DpShMCreate: sizeof(tm_adm) 4415616 (21968)
M DpShMCreate: sizeof(wp_ca_adm) 1664 (80)
M DpShMCreate: sizeof(appc_ca_adm) 1600 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07050040, size: 5042120)
M DpShMCreate: allocated sys_adm at 07050040
M DpShMCreate: allocated wp_adm at 07052170
M DpShMCreate: allocated tm_adm_list at 070556B0
M DpShMCreate: allocated tm_adm at 070556E0
M DpShMCreate: allocated wp_ca_adm at 0748B760
M DpShMCreate: allocated appc_ca_adm at 0748BDE0
M DpShMCreate: allocated comm_adm at 0748C420
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0750D2E0
M DpShMCreate: allocated gw_adm at 0750D320
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0750D350
M DpShMCreate: allocated wall_adm at 0750D358
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
Y *** ERROR => ztta/cua_area is 180000. [sapinit.c 975]
Y *** ERROR => ztta/cua_area adjusted to 500000. [sapinit.c 979]
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host egsap701
M
M Fri Jun 10 19:25:19 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.29)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 011-123-196-300
C SQLDBC client runtime is MaxDB 7.6.5.011 CL 196300
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.7.06 Build 007-123-197-046
C Database release is SAP DB 7.7.06.007
C INFO : Database 'NSP' instance is running on 'egsap701'
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C *** ERROR => the connected user (SAPNSP) does not work with the right user/schema
[dbslsdb.cpp 4818]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 4820]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 2768
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server egsap701_NSP_00 on host egsap701 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Jun 10 19:25:19 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2768) [dpnttool.c 334]Hello Rattandeep and Markus,
Thanks for explaining the error to me. I'm still facing the issue though!
My start profile is START_DVEBMGS00_egsap701 and instance profile is NSP_DVEBMGS00_egsap701 (they are included below).
In both profiles, the dbs/ada/schema has been currently deactivated. I get the same errors even after deactivating the parameter in both profiles. I also tried your suggestions by setting parameter values to SAPNSP and then to SAPR3 in both profiles but I'm still getting the same errors.
> the above log shows that you have to change the parameter with schema user SAPR3 instead of SAPNSP
You mean that the SAP system is started by SAPNSP user and since the profile is executed by SAPNSP user, we are getting the error? I don't know about the SAPR3 user or the user's credential. I only use bcuser/ddic RFC user to logon to SAP.
I don't know how to check the table space for SAPR3 database. As far as I know, BRTools is only for Oracle backends. So, I used Max DB database manager tool instead and found that the default NSP database has utilized about 50% data area (disk space). Overwrite mode is on and I have about 100% free log area (also determined through database manager tool). Still have not clue as to how to solve this. Please help. Thanks for your tips so far!
The start profile is as follows :
#.* Start profile START_DVEBMGS00_EGSAP701 *
#.* Version = 000004 *
#.* Generated by user = DDIC *
#.* Generated on = 27.04.2011 , 11:02:57 *
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = egsap701
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
DIR_PROFILE = $(DIR_INSTALL)\profile
_PF = $(DIR_PROFILE)\NSP_DVEBMGS00_egsap701
# Copy SAP Executables
Start_Program_00 = immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)
# Start ABAP database
_DB = $(DIR_CT_RUN)\strdbs.cmd
Start_Program_01 = immediate $(_DB) NSP
# Start SAP message server
_MS = $(DIR_EXECUTABLE)\msg_server$(FT_EXE)
Start_Program_02 = local $(_MS) pf=$(_PF)
# Start application server
_DW = $(DIR_EXECUTABLE)\disp+work$(FT_EXE)
Start_Program_03 = local $(_DW) pf=$(_PF)
rsdb/dbid = NSP
#dbs/ada/schema = SAPNSP
Instance profile is as follows:
#.* Instance profile NSP_DVEBMGS00_EGSAP701 *
#.* Version = 000006 *
#.* Generated by user = DDIC *
#.* Generated on = 27.05.2011 , 11:30:39 *
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = egsap701
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
rdisp/wp_no_dia = 3
rdisp/wp_no_btc = 1
icm/server_port_0 = PROT=HTTP,PORT=80$$
# SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
PHYS_MEMSIZE = 128
em/initial_size_MB = 10240
em/max_size_MB = 1024
abap/buffersize = 100000
#old_value: 0 changed: DDIC 27.04.2011 11:04:52
#old_value: 60000000 changed: DDIC 27.05.2011 11:29:55
alert/MONI_SEGM_SIZE = 0
enque/table_size = 2000
#parameter deactivated by: DDIC 27.05.2011 11:11:00
#rspo/local_print/method = 2
rsdb/ntab/entrycount = 5000
rsdb/ntab/ftabsize = 3000
rsdb/ntab/sntabsize = 100
rsdb/ntab/irbdsize = 1000
rsdb/cua/buffersize = 500
rsdb/obj/buffersize = 2048
rsdb/obj/max_objects = 500
rsdb/otr/buffersize_kb = 1000
rsts/ccc/cachesize = 6000000
rtbb/buffer_length = 500
rtbb/max_tables = 50
sap/bufdir_entries = 200
zcsa/presentation_buffer_area = 350000
zcsa/calendar_area = 300000
zcsa/table_buffer_area = 3000000
zcsa/db_max_buftab = 500
ztta/roll_area = 1000000
ztta/diag_area = 128000
ztta/dynpro_area = 150000
ztta/cua_area = 180000
rdisp/PG_SHM = 100
rdisp/PG_MAXFS = 256
rdisp/ROLL_SHM = 100
rdisp/ROLL_MAXFS = 2048
#old_value: 0 changed: DDIC 27.04.2011 11:04:52
#old_value: 300 changed: DDIC 27.05.2011 11:29:38
rdisp/autoabaptime = 0
rdisp/wp_ca_blk_no = 20
rdisp/appc_ca_blk_no = 20
rdisp/max_wprun_time = 30000
icm/min_threads = 5
icm/max_threads = 10
icm/max_conn = 20
mpi/total_size_MB = 10
rsdb/dbid = NSP
#parameter deactivated by: DDIC 27.05.2011 11:11:22
#dbs/ada/schema = SAPNSP -
Dispatcher has stopped !!
Dear friends,
I would like you to share your experience on the following problem. Our IDES Server ECC 6 is unable to start since the dispatcher process gets stopped everytime.
<b>Here's the log file :: dev_disp</b>
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DMO
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, Unicode, optimized
pid 2392
Mon Nov 26 16:28:29 2007
kernel runs with dp version 218000(ext=109000) (@(#) DPLIB-INT-VERSION-218000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2392) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Nov 26 16:28:46 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0080.qqq.nxst) took 17 seconds
Mon Nov 26 16:28:54 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 8 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >khi-sap-2_DMO_00 <
DpShMCreate: sizeof(wp_adm) 16896 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D60040, size: 4651960)
DpShMCreate: allocated sys_adm at 05D60040
DpShMCreate: allocated wp_adm at 05D61E40
DpShMCreate: allocated tm_adm_list at 05D66040
DpShMCreate: allocated tm_adm at 05D66070
DpShMCreate: allocated wp_ca_adm at 06135310
DpShMCreate: allocated appc_ca_adm at 0613B0D0
DpShMCreate: allocated comm_adm at 0613D010
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 061BDED0
DpShMCreate: allocated gw_adm at 061BDF10
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 061BDF40
DpShMCreate: allocated wall_adm at 061BDF48
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1625]
Mon Nov 26 16:28:55 2007
***LOG Q0K=> DpMsAttach, mscon ( khi-sap-2) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >khi-sap-2_DMO_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 83
Release check o.K.
Mon Nov 26 16:30:55 2007
ERROR => W0 (pid 2860) died [dpxxdisp.c 14299]
ERROR => W1 (pid 2040) died [dpxxdisp.c 14299]
ERROR => W2 (pid 2176) died [dpxxdisp.c 14299]
ERROR => W3 (pid 3892) died [dpxxdisp.c 14299]
ERROR => W4 (pid 2484) died [dpxxdisp.c 14299]
ERROR => W5 (pid 3624) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 476) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3976) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2552) died [dpxxdisp.c 14299]
ERROR => W9 (pid 3128) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W10 (pid 3232) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W11 (pid 3064) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:05 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Nov 26 11:31:05 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2860 Ended no 1 0 0
1 DIA 2040 Ended no 1 0 0
2 DIA 2176 Ended no 1 0 0
3 DIA 3892 Ended no 1 0 0
4 DIA 2484 Ended no 1 0 0
5 DIA 3624 Ended no 1 0 0
6 UPD 476 Ended no 1 0 0
7 ENQ 3976 Ended no 1 0 0
8 BTC 2552 Ended no 1 0 0
9 BTC 3128 Ended no 1 0 0
10 SPO 3232 Ended no 1 0 0
11 UP2 3064 Ended no 1 0 0
Dispatcher Queue Statistics Mon Nov 26 11:31:05 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
8
8
2000
8
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
1
1
2000
1
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 16
wake_evt_udp_now 1
wake events total 11, udp 9 ( 81%), shm 2 ( 18%)
since last update total 11, udp 9 ( 81%), shm 2 ( 18%)
Dump of tm_adm structure: Mon Nov 26 11:31:05 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T12, U13, , khi-sap-2, 16:29:02, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Nov 26 11:31:05 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:10 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >khi-sap-2_DMO_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3268) (SOFT_KILL)
Stop icman
killing process (3236) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 12
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/12
LOCK WP ca_blk 2
return errno (-17) to T12
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T12 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 1496 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 1496
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 1496
NiBufIClose: clear extension for hdl 5
dp_tm_adm[12].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1196076655/927000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 12
DpListInsert: insert elem 12 into tmadm_free_list (at begin)
DpListInsert: 189 elems in tmadm_free_list
DpListRemove: remove elem 12 from tmadm_inuse_list
DpListRemove: 12 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3268 HANDLE:1604)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3268 HANDLE:1604)
wait for end of icman
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:13 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:14 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:15 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:16 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:17 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:18 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:20 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:21 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:22 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3236 HANDLE:1608)
DpStartStopMsg: send stop message (myname is >khi-sap-2_DMO_00 <)
NiIMyHostName: hostname = 'khi-sap-2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Nov 26 16:31:23 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11957]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1548 (pos=2)
SiSelNRemove: removed sock 1548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/12
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2392) [dpxxdisp.c 10317]
Good Bye .....
<b>Following this you would also need to review another log file which is :: dev_w0</b>
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Nov 26 16:28:55 2007
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DMO\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'E:\usr\sap\DMO\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'E:\usr\sap\DMO\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.80)
B New connection 0 created
M sysno 00
M sid DMO
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 83
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2860
M
M kernel runs with dp version 218000(ext=109000) (@(#) DPLIB-INT-VERSION-218000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2860) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 16896 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D60040, size: 4651960)
M DpShMCreate: allocated sys_adm at 05D60040
M DpShMCreate: allocated wp_adm at 05D61E40
M DpShMCreate: allocated tm_adm_list at 05D66040
M DpShMCreate: allocated tm_adm at 05D66070
M DpShMCreate: allocated wp_ca_adm at 06135310
M DpShMCreate: allocated appc_ca_adm at 0613B0D0
M DpShMCreate: allocated comm_adm at 0613D010
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 061BDED0
M DpShMCreate: allocated gw_adm at 061BDF10
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 061BDF40
M DpShMCreate: allocated wall_adm at 061BDF48
X
X Mon Nov 26 16:28:56 2007
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host khi-sap-2
M
M Mon Nov 26 16:28:57 2007
M calling db_connect ...
C Prepending E:\usr\sap\DMO\DVEBMGS00\exe to Path.
C
C Mon Nov 26 16:28:58 2007
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DMO on connection 0 (nls_hdl 0) ... (dbsl 700 250806)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0631BE78 06321414 06320C9C
C Attaching to DB Server DMO (con_hdl=0,svchp=06320BE8,svrhp=063320F4)
C
C Mon Nov 26 16:29:55 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@DMO on connection 0 (nls_hdl 0) ... (dbsl 700 250806)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0631BE78 06321414 06320C9C
C Detaching from DB Server (con_hdl=0,svchp=06320BE8,srvhp=063320F4)
C Attaching to DB Server DMO (con_hdl=0,svchp=06320BE8,svrhp=063320F4)
C
C Mon Nov 26 16:30:52 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 10933]
B ***LOG BV3=> severe db error 12154 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 12154 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12154: TNS:could not resolve the connect identifier specified [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10205]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server khi-sap-2_DMO_00 on host khi-sap-2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Nov 26 16:30:52 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10404
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2860) [dpnttool.c 327]
I would very much thankful to you in this regard if you can help me resolve this issue please!
Best Regards,
MuzammilHi
You need to check strdbs.cmd is started or not, because this is the one which starts the database.As all the programs reside in the database, check whether ur database is up or not.
Hope this gives you an idea
Regards
Sudhakar Manoharan -
Solution Manager system not responding/dispatcher has stopped
There have been no changes to this instance however when we did a quick reboot the disp+work will not come up. Attached is the Dev_W0 file. Any help would be great. We have been down for two days waiting on SAP. We have done several reboot attempts and physically brought down the sever and nothing seems to be helping.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Jul 20 23:10:34 2010
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\SOL\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\SOL\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\SOL\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.115)
B New connection 0 created
M sysno 00
M sid SOL
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 133
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3908
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3908) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 31088 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E00050, size: 6354512)
M DpShMCreate: allocated sys_adm at 0000000010E00050
M DpShMCreate: allocated wp_adm at 0000000010E02150
M DpShMCreate: allocated tm_adm_list at 0000000010E09AC0
M DpShMCreate: allocated tm_adm at 0000000010E09B20
M DpShMCreate: allocated wp_ca_adm at 000000001136D9C0
M DpShMCreate: allocated appc_ca_adm at 0000000011373780
M DpShMCreate: allocated comm_adm at 00000000113756C0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000113FC350
M DpShMCreate: allocated gw_adm at 00000000113FC3D0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 00000000113FC400
M DpShMCreate: allocated wall_adm at 00000000113FC410
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Jul 20 23:10:35 2010
M ThInit: running on host sapsolman
M
M Tue Jul 20 23:10:36 2010
M calling db_connect ...
C Prepending F:\usr\sap\SOL\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSOL's password
C Connecting as /@SOL on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0000000012811220 0000000007E1F1B0 0000000012834BC8
C Attaching to DB Server SOL (con_hdl=0,svchp=0000000012834A88,srvhp=0000000012836EB8)
C
C Tue Jul 20 23:10:37 2010
C Starting user session (con_hdl=0,svchp=0000000012834A88,srvhp=0000000012836EB8,usrhp=0000000007E1F9C8)
C Now '/@SOL' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSOL's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0000000012834A88,usrhp=0000000007E1F9C8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSOL/<pwd>@SOL on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0000000012811220 0000000007E1F1B0 0000000012834BC8
C Starting user session (con_hdl=0,svchp=0000000012834A88,srvhp=0000000012836EB8,usrhp=0000000007E1F9C8)
C Now 'SAPSOL/<pwd>@SOL' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance SOL is running on SAPSOLMAN with ORACLE version 10.2.0.2.0 since JUL 20, 2010, 23:10:12
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100720 231035 SAPSOLMAN
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Jul 20 23:10:38 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000015160050, size: 4400128)
M SHM_ROLL_AREA (addr: 000007FFCB580050, size: 268435456)
M SHM_PAGING_AREA (addr: 00000000155A0050, size: 268435456)
M SHM_ROLL_ADM (addr: 00000000255B0050, size: 2678942)
M SHM_PAGING_ADM (addr: 0000000025840050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 00000000258D0050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000ADC0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B NTAB_ERROR: wrong eye_catcher, art 0
B db_ntinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 261]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2084]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1523]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10380]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapsolman_SOL_00 on host sapsolman (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Tue Jul 20 23:10:38 2010
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10585
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3908) [dpnttool.c 327]> B db_ntinit failed
> M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 261]
> M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2084]
> M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1523]
> M in_ThErrHandle: 1
> M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10380]
The dispatcher can't allocate a shared memory segment.
What was changed before this happens?
Markus -
VERY URGENT: BG/WP STOPPED
hi experts
while iam doing the client export in ECC5 with t-code SCC8
and i scheduled it as background job.
after 90 sec the BG/WP is automatically going in to status
stopped and reason is RFC for that i increase the rdisp/btctime=600 sec eventhoug it was stopped.but in SM37 job status is ACTIVE
0 DIA 4128 waiting Yes
1 DIA 22812 waiting Yes
2 DIA 27812 waiting Yes
3 DIA 4684 Running Yes
4 DIA 13584 waiting Yes
5 UPD 6628 waiting Yes
6 UPD 4580 waiting Yes
7 ENQ 6492 waiting Yes
8 BGD 17736 waiting Yes
9 BGD 13768 stopped RFC Yes
10 BGD 18368 waiting Yes
11 SPO 9172 waiting Yes
12 UP2 19980 waiting Yes
13 UP2 6404 waiting Yes
cheersHello,
Check with the basis guys, sounds like something with the scheduler is going wrong if I understand you correctly.
Kind regards
Ash Thomas
<a href=http://www.ashthomas.com>Sap Abap CV & Sap Abap Resume</a>
<a href=http://www.ashthomas.com>www.ashthomas.com</a> -
URGENT: Need to stop screen flicker (PWM) on T420s with IntelPWMControl
I see other users have managed to use this program 'IntelPWMControl' to stop their LCD screen from flickering (PWM) on their machines with intel HD graphics:
www.youtube.com/watch?v=ycKzTDnTYTQ
Another useful thread, outlines how to do this
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Thinkpad-W530-display-hurts-my-eyes/td-p/13892...
I tried the said link (from the above thread), but on my T420s (Windows 7 x64), it doesn't run at all. In fact it says something about a C++ Exception. I have tried Intel HD drivers from 2013 and 2012 which are purported to work, but nothing seems to.
Can anyone running this, confirm which windows version and driver they are using?
I need to fix this ASAP as I rely on my T420s for work on a daily basis and it's giving me bad headaches...I'm running 9.17.10.4101 right now and it works fine.
I recall getting that C++ assertion error or something at some point, but don't quite recall how I fixed it.
If you right-click the EXE, and go to the Run with Graphics Processor submenu, is it defaulting to the discrete or integrated card?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Urgent: Open Directory stopped and won't restart
I got into work this morning and restarted the server. Now no one can connect to it. The Open Directory service has stopped and there is no button visible to restart it.
OD log says: Network transition occurred. Shutting down DirectoryService...
Any ideas? Monday morning and everyone's going to be baying for blood!
Edit: some of the configuration log:
2009-11-23 08:58:34 +0000 - popen: /bin/launchctl load /System/Library/LaunchDaemons/com.apple.PasswordService.plist, "r"
2009-11-23 08:58:34 +0000 - command failed with exit code 256: /bin/launchctl load /System/Library/LaunchDaemons/com.apple.PasswordService.plist
2009-11-23 08:58:34 +0000 - popen: /bin/cp -r /Volumes/ldap_bk/openldap /etc/, "r"
2009-11-23 08:58:34 +0000 - command failed with exit code 256: /bin/cp -r /Volumes/ldap_bk/openldap /etc/
2009-11-23 08:58:34 +0000 - 4 Restoring LDAP database
2009-11-23 08:58:34 +0000 - popen: /bin/cp /Volumes/ldap_bk/com.apple.openldap.plist /Library/Preferences/, "r"
2009-11-23 08:58:34 +0000 - command failed with exit code 256: /bin/cp /Volumes/ldap_bk/com.apple.openldap.plist /Library/Preferences/
2009-11-23 08:58:34 +0000 - Removed file at path /private/var/db/openldap/openldap-data/alock.
2009-11-23 08:58:34 +0000 - popen: /usr/sbin/slapadd -c -l /tmp/slapconfig_stage1777mOX7M/backup177.ldif, "r"
2009-11-23 09:16:45 +0000 - slapconfig -restoredb
2009-11-23 09:16:45 +0000 - command: /usr/bin/hdiutil attach /.ServerBackups/openDirectory/SBSBackup_OpenDirectoryMaster.sparseimage -readonly
2009-11-23 09:16:48 +0000 - Disk name disk4
2009-11-23 09:16:48 +0000 - Error: Cannot retrieve the primary IPv4 address.
2009-11-23 09:16:48 +0000 - command: /usr/bin/hdiutil detach disk4
2009-11-23 09:17:04 +0000 - hdiutil command output:
hdiutil: couldn't eject "(null)" - Bad file descriptor
2009-11-23 09:17:04 +0000 - hdiutil command failed with status 3
2009-11-23 09:17:04 +0000 - Warning: Could not detach the archive, exit code 71.Well I got everyone's files off onto an external hard drive and then restored from backup. Took a couple hours but it's fine. Only problem now is I'm too scared to restart the server.
-
what shl i do now. I done every effort .....didn`t. Can anybody have the answer .......?
HI,
check for the vailable space on the disk where your sap executables and data files are sitting, if using oracle check the tablespace.
check the dispatcher trace files in work directory these are text files with file name starting with dw_ (paste them here so we can check), check the DB services are running or not, also sap services also check DB status and listner status(if oracle).
hope this helps.
Best regards.
Edited by: Sita Rama Raju Uppalapati on Aug 23, 2008 11:27 PM -
Very Urgent My project STOP !!!!!!!!!
Hi
I have big problem with report 9i ,
I have field on my form has mixed numbers with characters
When i print in PDF format that field on my report it show me starnge ordering of that numbers and characters , HOW I can solve it ?
Original Field :98IS2102TOC (Correct)
Printable field on PDF file :IS2102TOC98 (!!!!!!)
PLS,hello,
this is very strange. are you sure the data that comes from the data source is correct ?
if this is happening all across the board with your reports, you might want to contact oracle support for further investigations.
thanks,
ph. -
Urgent: OA page stopped running at all
I have developed some OA page using jdeveloper and ran successfully previously. But after one week, when i run the page, the page is not running; it shows waiting for long time and no error message in jdeveloper log.The log is:
Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdk1.4.2\bin\javaw.exe -client -classpath C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\j2ee\home\oc4j.jar;C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Dhttp.proxyHost=10.10.20.49 -Dhttp.proxyPort=3828 -Dhttp.nonProxyHosts=*portal*|*gp* -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config C:\OracleSoft\p4045639_11i_GENERIC\jdevhome\jdev\system9.0.3.5.1312\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 8500 ms.
Auto-deploying OA Framework web application deployment descriptor (New server version detected)...
Oracle9iAS (9.0.3.1.0) Containers for J2EE initialized
TIME: runregion: initialization [15 ms]
Tutalii: C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdev\appslibrt\iasjoc.zip archive
------at this point, it got stuck.
within this week two patches are applied in the erp instance:
Patch NO. 5130830
Description: Oracle Purchasing: Approval Issues - funds override does not work, Approval action history recorded incorrectly, wrong printer chosen for printing the document, Create doc workflow fails after patch 4871481.
Patch NO. 5680612
Description: In Oracle Purchasing the few purchasing and requisitions action history were not proper.
i dont know whether these pathces affect that.
Please help me running my page..................Shafiul,
Let the process be running, it will timeout at some point and should give some more log details. Did you try running a simple new page to make sure that your setup is correct?
--Shiv
Maybe you are looking for
-
Changing my Apple ID when I don't have access to original email account
I no longer have access to the email account I used to open my Apple account. I created the account years and years ago and now I don't remember what my "secret word" is either. How can I change this email address?
-
Is there any way to get true "actual size"?
The "actual size" view on my new 20" Apple cinema display is only 75% of actual size in all of my layout/image programs. Is there any way to fix this? I posted a similar topic earlier, but no one has responded. Your help would be greatly appreciated.
-
My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about? Any ideas on how to resolve this.
-
Dear Experts, I am having the following requirement. Can it be possible to present the QUERY result in Graph ? I read many thread in SDN, I found through APD/WAD we can do it . But I am confused. But I am not getting any thread , How to pro
-
In above mention error i followed this metalink doc Error Updating Employee Record In Shared HR Environment APP-PER-07510 You can not continue. Future events exist (Doc ID 1483127.1) Kindly verify that whether i m going in Right direction or not. If