Urgent - 'Distribute' Function is reffering to wrong planning area

Dear Consultants
I have problem with 'Distribute with Key' function.
I am using Actuals cube and Planning cube in my multiplanning area. I like to distribute planned quantity from material level to sales office level. No selections for planning area, year and verion at planning level or package.
In the Distribute function, I am using Sales Office characteristics as field to be changed and Planning Area,Year, Version characteristics as Fileds for condition. I am restricting the planning area to my planning data and year and version to planning year and version in the function.
While executing this function, it selects data records from the Actuals Cube, ignoring the values set in the function for planning area, year and version.
Please guide.
Best Regards
Shahid

Hello,
In case you don't want to work with your actuals cube for this function, I think you should select the area (and year, depending if you distribute on the same year or not...)in the planning level.
I think that (please somebody correct me if I'm wrong) the data that is taken into account by your function is what is selected in the level, then, the function runs for its own (sub)-selection.
Regards,

Similar Messages

Function types for Balance Sheet Planning missing in SEM-BPS 6.0

Hi BPS experts,
After upgrading our BI-system from SEM 4.0 to SEM 6.0 (level 10) as part of the upgrade from BW 3.5 to BI 7.0 (level 15), the BPS function types for balance sheet planning are not available in the planning environment (Transaction code BPS0).
According to the SAP Library the balance sheet planning functions in SEM-BPS comprises of 6 standard function types - one of them is "Depreciation":
<a href="http://help.sap.com/saphelp_sem60/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm">help.sap.com -> Business Planning and Simulation (BW-BPS)</a>
Menu path: Business Planning Functions -> Functions for Balance Sheet Planning
In our existing SEM 4.0 we are using "Depreciation" and the functions based on this function type are of course short dumping when executed in our upgraded system (SEM 6.0) as the function type does not exist here.
Odd though - we do have the function type "Allocation" available in SEM 6.0, which should be delivered with SEM together with the Balance Sheet Planning function types (It is listed directly under "Business Planning Functions" in the SAP Library) .
I have tried to figure out whether we missed out on activating something during or after the system installation, but our basis consultant has not found anything in the installation guides related to this issue. Also I was wondering whether it could be a simple matter of activating some Business Content but without any luck.
Does anybody know why the Balance Sheet Function Types are not available in SEM-BPS 6.0?
Kind regards,
Lars
PS: Our system status is:
SAP_ABA     700     0013     SAPKA70013     Cross-Application Component
SAP_BASIS     700     0013     SAPKB70013     SAP Basis Component
PI_BASIS     2005_1_700     0013     SAPKIPYJ7D     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0005     SAPKITLQI5     SAP Solution Tools Plug-In
SAP_BW     700     0015     SAPKW70015     SAP NetWeaver BI 7.0
FINBASIS     600     0010     SAPK-60010INFINBASIS     FINBASIS 600 : Add-On Supplement
SEM-BW     600     0010     SAPKGS6010     SEM-BW 600 : Add-On Supplement
BI_CONT     703     0007     SAPKIBIIP7     Business Intelligence Content
Message was edited by:
        Lars B Rasmussen

Hi Lars,
It seems not all the planning function from SEM BPS are available in BW BPS. Please check the links below: -
what is the difference between BW 3.5 BPS and SEM BPS 4.0
BW- BPS and SEM- BPS
SEM-BPS VS BW-BPS
BCS Doc
Regards,
SK

Need to Lock Planning Area by using Enque and Deque Technique.

Hi Experts,
My problem is I have to lock the planning area till the Batch program complete and I have to unlock the planning area once the batch job is completed. if any one of the user is login i.e. accessing planning book while batch job is running then batch job getting Failed.
we can check the lock in SM12
We have a custom program to send message to user to come out of the planning area but it does hit upto the mark.
we are expecting some solution to lock and unlock the plannig area till the job completes.
I was using some functional module to lock the planning area but it does not helped us. Kindly provide some help to acheive this situation
The below functional modules I used to lock the Plannning area ZDP31. I have given the input while executing the Function module PAREAID = ZDP31 (our Planning area Name)
1) ENQUEUE_/SAPAPO/E_PAREA
2) /SAPAPO/TS_DM_LOCK
3) /SAPAPO/TS_DM_UNLOCK_NEW
4) /SAPAPO/TS_DM_LOCK_UNLOCK
Please help me its in high prioity for us.

Hello Balaji,
Here are the needful function modules where you can use to lock the PA by enque & deque technique..
a) ENQUEUE_READ Pass Planning Area value as GARG and PAREAID as GNAME to get information about lock entries for selected planning area. GUNAME corresponding to GNAME = /SAPAPO/DM_PAREA_LOCK and GOBJ = /SAPAPO/E_PAREA entries provides user id (s) locking the planning area displayed in the field GTARG.
b) TH_POPUP to send out popup messages to the users locking the Planning Area.
c) TH_DELETE_USER to kick off users (GUNAME) who have been locking the planning area.
I hope this helps...
Cheers !!
Regards
Rahul Chitte

Function module / BAPI for changing planning date (FDTAG)

Hi everyone,
Let's go for a problem.
Many FI documents have been created in our system, with a wrong planning date, these documents have to be changed and I have been trying to develop a report.
I am having a big trouble finding a function module or a BAPI which allows me to change the planning date (FDTAG field). I have been trying these function modules:
FI_ITEMS_CHANGE
FI_DOCUMENT_CHANGE
The first one works for changind data in the FI documents but it seems like it can't change the planning date, it returns an error message that informs that the FDTAG field can not be changed.
The second one is confusing, I have been unable to feed the function module with the data it needs to determine a single document.
I am trying to use BAPI_ACC_DOCUMENT_POST right now, it doesn't seems promising but you never know.
Has anyone had the same problem? I have been looking for an answer in both google and here but I can't find one, just some people with the same problem.
I will keep trying to find the solution, if I find it I will post it here.
Thanks in advance,

Hi again Max,
This worked perfectly, even better because we where already using the FDTAG field for mass changes (don't remember right now which note we implemented) so I have just used FI_ITEMS_MASS_CHANGE with no changes at all.
Thank you very much for the help.

I can't use the distribute function in livecycle design?

I can't use the distribute function in livecycle design?
I have spent many hours designing this and the feature is not able to work it is greyed out.
I am using adobe XI (not pro). What am I doing wrong?

Hello,
Do you want to make the form editable?
If yes,
To make this you need to Reader Extend the form by following steps.
- Open the form in Acrobat Professional.
- Click on Advanced option and then on Enable usage rights…here you can select the various usage rights to be enabled.
- Save the file.
Now you can distribute this form and users can fill in save for their records, print.
-Vijay

Distribute functions

Hi,
Could some one explain me how the below standard functions work and what is the differenec between each of them.
1.Distribute by Keys
2.Distribute by keys from sender to recipient.
3.Distribute by reference data from sender to Recipient
4.Distribute with reference data.
I looked at help.sap.com but that did not help much.
Any kind of help is appreciated.
points will eb assigned.
Thanks,
Subha

Hi,
Distribute with Reference Data:
Suppose i am planning sales quantity of materials for a sales representative and one sales representative has 3 customers (say). Now the quantity planned per sales representative has to be distributed among all the customers.
In the level where layout is defined, we wont have customer because it is for planning per sales representative. So on this layout, customer is blank.
Now distribute function should distribute this customer # record to all the customers.
The primary requisite for distribute with reference data to work is that there should be at least one record existing at the lowest level to which we want to distribute. Otherwise, it says no reference data exits.
Material SalesRep Customer Quantity
M1          SR1          C1           10
M1          SR1          C2           20
Suppose these records are already existing in the cube. When you open the layout at the sales rep level, we will see 30. If we plan it as 90, the delta record wil be
M1       SR1       #        60
Now for this record to distribute among the customers C1 and C2, distribute with reference data fetches the above two records in the cube. When it finds them, it will distribute the corresponding amounts.
for C1, 60*10/30 = 20
for C2, 60*20/30 = 40
So it will generate two delta records in the cube along with the exitsting two records. Finally cube data will be
M1   SR1 C1 10
M1   SR1 C2 20
M1   SR1 C1 20
M1   SR1 C2 40
For the distribute function to run properly,
fields for condition: Keyfigure name
fields to be changed: Customer
fields for reference : Material and customer
If it cant find reference data, it wont distribute and if we save that, a delta record of M1 SR1 # 60 gets saved in the cube.
Hope this example clarified about distribute with reference data.
Bindu

Store rep signed me up under the wrong plan and no one in customer service has fixed it in over a month

I was bait and switched. I signed up under the pretense that I was getting the promotional rate of 40gb/$150 that was scheduled to end on November 5 2014.
I walked into a Verizon wireless store on November 4th with the intent to trade in my iPhone 5s which I was offered $350 trade in value and port over 2 of my lines with T-Mobile under the Verizon promotion. Once I was approved and offered my trade in I was told that the phones I was seeking to purchase from Verizon was not in stock and needed to be ordered, and delivered separately with the iPhone 6 being shipped out November 14 and the iPhone 6+ shipped November 21. Thomas, the Verizon wireless sales representative, also informed me that for me to get the promotional rate I would have to open the account with an active line before the 5th or I wouldn't be able to get the promotional rate since the phones would be delivered past the promotional date period. The sales representative insisted I should add an iPad that was in stock at the store and I could leave the store with an active account and once my phones were delivered I would be all set to go with my promotional plan and devices. I had no need for an iPad but decided it was worth getting for the sake of the promotion.
ON November 14 I recieved via FedEx a package containing not a iPhone 6 as promised, but a iPhone 6+. I called Verizon to activate the phone that was ported to my personal phone number, and didn't have my iPhone 6 that was set to port my out of state business line and cancel service with T-Mobile on the 14th of November. To say the least I was extremely upset for which I had no means of recieving business calls from North Carolina while I live in Florida. At that point I asked the Verizon customer care representative I had on the phone to see if they could see if there was a store that had the iphone 6 I ordered in stock so that I an could have a business phone the same day. He found a store that had it in stock and it happened to be the store I originally signed up at. I was told that it was in the color and storage capacity I had originally ordered and that I could pick it up at the store to complete my purchase with Verizon. Again, for the sake of having a business line I ran to the store and spoke with Thomas and explained the mix up. upon moving forward I was informed that they had an iPhone 6 in stock with the capacity I had requested but not the same color I had ordered. At that point I didn't care I just needed a phone and proceeded to activate the phone he had in stock And ported over my business line.
After recieving a text from Verizon that I had consumed all of my data just days after I recieved my phones I called Verizon 611 from my phone and spoke to a customer care representative named Fallon, which informed me I was set up on the wrong plan and that she see's the notes that Thomas notated that I was subscribing for a 40gb plan and that she was going to send a request I D # [removed] form to make the corrections and that there was no need for me to cancel service as I was within my cancelation period, again she insisted that there was no need to cancel and that the request would be granted and she would be calling me once my billing cycle reset and the corrections were made and she would credit my account based on the promotional rate. I NEVER RECIEVED A CALL FROM FALLON! Not even to be notified that the request was denied! I came to realize later in December when I recieved a $1200 bill that this wasn't resolved. I called customer service again and spoke with a gentleman that explained the request was denied and that this will be resolved after I explained what transpired. He assured me that he was going to expedite another request and he would be in contact with me within a few hours....... I'm still waiting for his call as well!
I called again several times in the past few days and have spoken to several supervisors that promised to resolve this matter and call me back promptly........ Again, no one has called me back!
December the 8th I spoke with a supervisor named Victoria which assured me she would get this resolved within the next 24 hours and gave me her direct number to reach her if I didn't hear from her [removed], again I haven't heard from her yet and I've made several attempts to reach her at her direct line to no avail.
December the 9th I spoke with supervisor named Mike employee #[removed] in the Seattle call center, he appoligized for the mix up and that no one has called me back and that he would handle this matter and get back to me today December 10th....... Again no call..... I have spoken to 3 people today all which have made promises to call me back today within a few hours and none that have. I just got off the phone with a supervisor named Vanessa Jentfield at the Chicago call center and saw all the notations and assured me that there is no reason why this shouldn't be corrected and that she would be calling me back tonight or tomorrow. I will be sitting by the phone unless Verizon wireless decides to disconnect my service for non payment of $1200+.........
I have filed a complaint giving a detailed explanation of what has transpired with the FCC as well as the FTC, my next step is to file a small claims lawsuit tomorrow morning with the state of Florida and see if Verizon finds a way to contact me then,I guess I will just have to wait and see.
Personal information removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

It was a good idea to file a complaint with the FCC, someone from Verizon will contact you by phone in an effort to resolve your issue. I wouldn't suggest small claims court as they have not done anything illegal, (just bad customer service) and their contract with you is usually upheld, which in this case is not for the plan you want. The person contacting you likely has a little more pull, as the call centers can only uphold the written customer agreement made.

How to return fillable pdf form via distribute function in live cycle?

I am trying to have a fillable form be submitted back/returned by e-mail (through using outlook)to multiple users, via the distribute form function through livecycle, so that they know a pdf form has been completed and sent back and that I can place the information in the dataset as well (in case I need to export the info). Currently the distribute function only accepts it going to one e-mail, even if I seperate the e-mails with a ";". How do I have the form e-mail multiple users and allow me to place the form field data go into a dataset via distribution?

I tried it and I am seeing what you are seeing. If I send to a single user then it works fine. I think it might be outlook blocking the multi-address through programmatic interfaces. They do this so that viruses cannot turn your mail client into a spam generation. This is simply a guess.

Wrong planned cost calculation while actual is calculating correct for internal activities

Dear all,
I am facing an issue in which when i am doing network costing with work center, activity type, cost center and giving per hour rate in KP26. System is calculating correct actual cost but every time its calculating wrong planned cost. For example: If i have given per hour rate 60 usd when planning for 100 hrs in cj20n its showing 2500 while confirmation is working correct and for 10 hrs its showing actual cost of 600.
I have checked work kp26 also report KBST to make sure about rate. Also i have checked configuration related costing variant planned and actual and its standard PS02 and PS03.
I will really appreciate suggestions or some one face similar issue and got it resoved.
Thanks.

Dear All, this issue is resloved. I didnt give quantity in KP26. However i am more curious that most of the time i dont give any quantity in kp26 and always system works fine and calculate correct cost than why this time its calculating wrong planned cost.
Thanks all.

How to identify Which function modules are used in the planning area?

Hi all,
there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
But how to identify which function module is used in which planning area?
I cant find out from the where used list from function modules?
Thanks
pooja

Hi Pooja,
Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
Regards,
Indu

ABAP Function for renaming of a planning level?

Hi all,
i wanna know if does exist an ABAP Function for renaming of a planning level or parameter group.
Someone can help me please?
Thanx a lot,
Paolo.

<Font Face="Tahoma" Color="Blue">
Hi,
I don't think any such Function Module exists. Nonetheless I can give you a good hint.
All the details of all planning objects (Planning Areas, Planning Levels, Planning Functions. Parameter Groups etc) are stored in UP* Tables. Just go to T-code SE11 and search for tables with name UP*.
Once you know the tables, you can write your own customized ABAP code.
PS: I can recommend above method to just read the details of Planning Objects. I don't think you should be ambitious to change planning object names by attempting to change system table contents. Hope you are getting me.
Regards,
Abhijit
</Font>

Function modules invoked in wrong sequence bapi_po_create

trying to use bapi_po_create in se37
enter purch org     vendor   doc type    purch group
when test get the following
function modules invoked in wrong sequence
what does that mean?
how an i create

Not sure, but I do think you need more information than that. Here is an example program calling the BAPI.
report zrich_0001.
constants : c_x value 'X'.
data: del_date type sy-datum.
data: pohead type bapimepoheader.
data: poheadx type bapimepoheaderx.
data: exp_head type bapimepoheader.
data: return type table of bapiret2 with header line.
data: poitem type table of bapimepoitem with header line.
data: poitemx type table of bapimepoitemx with header line.
data: posched type table of bapimeposchedule with header line.
data: poschedx type table of bapimeposchedulx with header line.
data: ex_po_number type bapimepoheader-po_number.
parameters: p_matnr type ekpo-matnr.
parameters: p_werks type ekpo-werks.
parameters: p_lgort type ekpo-lgort.
parameters: p_menge type ekpo-menge.
parameters: p_lifnr type ekko-lifnr.
parameters: p_ekorg type ekko-ekorg.
parameters: p_ekgrp type ekko-ekgrp.
parameters: p_bukrs type ekko-bukrs.
* Header Level Data
pohead-comp_code = p_bukrs.
pohead-doc_type   = 'NB'     .
pohead-creat_date = sy-datum   .
pohead-vendor = p_lifnr.
pohead-purch_org = p_ekorg.
pohead-pur_group = p_ekgrp.
pohead-langu      = sy-langu   .
pohead-doc_date   = sy-datum.
poheadx-comp_code = c_x.
poheadx-doc_type   = c_x.
poheadx-creat_date = c_x.
poheadx-vendor     = c_x.
poheadx-langu      = c_x.
poheadx-purch_org = c_x.
poheadx-pur_group = c_x.
poheadx-doc_date   = c_x.
* Item Level Data
poitem-po_item = 1.
poitem-material = p_matnr.
poitem-plant    = p_werks.
poitem-stge_loc = p_lgort.
poitem-quantity = p_menge.
append poitem.
poitemx-po_item    = 1.
poitemx-po_itemx   = c_x.
poitemx-material   = c_x.
poitemx-plant      = c_x .
poitemx-stge_loc   = c_x .
poitemx-quantity   = c_x .
poitemx-tax_code   = c_x .
poitemx-item_cat   = c_x .
poitemx-acctasscat = c_x .
append poitemx.
* Schedule Line Level Data
posched-po_item        = 1.
posched-sched_line     = 1.
posched-del_datcat_ext = 'D'.
del_date = sy-datum + 1.
write del_date to posched-delivery_date.
posched-deliv_time     = '000001'.
posched-quantity       = p_menge.
append posched.
poschedx-po_item        = 1.
poschedx-sched_line     = 1.
poschedx-po_itemx       = c_x.
poschedx-sched_linex    = c_x.
poschedx-del_datcat_ext = c_x.
poschedx-delivery_date = c_x.
poschedx-quantity       = c_x.
append poschedx.
call function 'BAPI_PO_CREATE1'
     exporting
          poheader         = pohead
          poheaderx        = poheadx
          testrun          = ' '
     importing
          exppurchaseorder = ex_po_number
          expheader        = exp_head
     tables
          return           = return
          poitem           = poitem
          poitemx          = poitemx
          poschedule       = posched
          poschedulex      = poschedx.
call function 'BAPI_TRANSACTION_COMMIT'
     exporting
          wait = 'X'.
if not ex_po_number is initial.
call function 'DEQUEUE_ALL'.
else.
call function 'DEQUEUE_ALL'.
* message i036.
endif.
Regards,
RIch Heilman

Copy data between planning area with function module

Hi gurus!
I'm involved in a consumer products project
In my multiplaning area i copy "catalog code" from act to fct after a preliminary selection in a authorization layout..
Due to increase performance I'm in need to convert the FOX which copies data from actual plan area to fct plan area after the authorization check, into a formula exit...
This fox works fine but as you can imagine it takes a lot of time to execute cause it has to read every catalog code form the transactional data...
here follows gross summary of the code.
this FOX copies ACT catalog code into FCT catolg
code by CALQUARTER according to Catalog code
authorization stored in AUTH version
DATA PER TYPE 0CALQUARTER.
DATA ENDPER TYPE 0CALQUARTER.
DATA KEYF TYPE KEYFIG_NAME
PER = VARV(variable)
ENDPER = TMVL(per,4).
catalog code is present in the level selection
with no filter
AUTH is the version used for set up the
authorization in data copy (no quarte info is needed)
IF {KEYF,AUTH,#,PLAN1}>0.
PLAN1 I the FCT plan area, PLAN2 is the Act plan area
DO.
{KEYF,FCT,PER,PLAN1}={KEYF,ACT,PER,PLAN2}.
IF PER = ENDPER.EXIT.ENDIF.
PER=TMVL(PER,1).
ENDDO.
ENDIF.
I've found many example in the forum but nothing which refers to different planning areas data copy with exit.
I'll be gratefull to any of you who can help me to compile this function module.
Best regards
M91

Hi Rakesh,
You can use COPY/Version Management Function to do this.
Path: Demand Planning > Environment >Copy/ Version Management
The system takes into account only those periodicities that are common to both planning areas.
For example, if the data is saved in months in the source planning area (PA1) but in months and weeks in the target planning area (PA2)
the system copies to months in the target planning area and then Disaggregates the data to the storage buckets in accordance with the Time-based Disaggregation.
hope this wil help to understand the basic concept.
Kapil

Distribute function not working - always freezes

Hi,
I have created numerous interactive PDF forms successfully, but since this year I have been unable to get the distribute function to work. When creating a form or even editing an existing form once I go to distribute I get through the first couple of prompts before the program freezes and shuts down. I have tried uninstalling and reinstalling the program - when I do this it works one time but then never again.
Has anyone had this problem and is able to help?
Thanks!

Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P.

About getting a wrong plan due to incorrect stats

Hi,
can someone give an example which demonstrate how wrong stats on a table lead to a different/inefficient execution plan? I tried one but in what I tried, optimizer picked same plan when stats were incorrect. What I tried was to have a table with two columns and an index on one column and select based on this column as below:
SQL> desc tab1
Name Null? Type
COL1 NOT NULL NUMBER
COL2 NUMBER
(there is an index i1 on table col1)
SQL> select num_rows from user_tables where table_name=
2 'TAB1';
NUM_ROWS
0
SQL> select count(*) from tab1;
COUNT(*)
10000
SQL> set autot on
SQL> select * from tab1 where col1=58398;
no rows selected
Execution Plan
Plan hash value: 4092115641
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time
|
| 0 | SELECT STATEMENT | | 1 | 26 | 1 (0)| 00:00:
01 |
| 1 | TABLE ACCESS BY INDEX ROWID| TAB1 | 1 | 26 | 1 (0)| 00:00: <---oracle uses index when stats are not updated
01 |
|* 2 | INDEX RANGE SCAN | I1 | 1 | | 1 (0)| 00:00:
01 |
Predicate Information (identified by operation id):
2 - access("COL1"=58398)
Statistics
0 recursive calls
0 db block gets
2 consistent gets
0 physical reads
0 redo size
289 bytes sent via SQL*Net to client
327 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processed
--now update stats
SQL> exec dbms_stats.gather_table_stats(null,tabname=>'TAB1',cascade=>true);
PL/SQL procedure successfully completed.
SQL> select * from tab1 where col1=58398;
no rows selected
Execution Plan
Plan hash value: 4092115641
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time
|
| 0 | SELECT STATEMENT | | 1 | 7 | 2 (0)| 00:00:
01 |
| 1 | TABLE ACCESS BY INDEX ROWID| TAB1 | 1 | 7 | 2 (0)| 00:00: <--same plan of acess by index row id)
01 |
|* 2 | INDEX RANGE SCAN | I1 | 1 | | 1 (0)| 00:00:
01 |
Predicate Information (identified by operation id):
2 - access("COL1"=58398)
Statistics
0 recursive calls
0 db block gets
2 consistent gets
0 physical reads
0 redo size
289 bytes sent via SQL*Net to client
327 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processed
SQL>
In the example I tried, oracle picks the same plan whether stats are updated or not - I am trying to get one example where oracle picks wrong plan (due to incorrect stats).
thanks

It doesn't matter whether or not you have the cheapest or most expensive voice and text plants, smartphones require a data plan to be eligible for a discount. It should be the same for the iPhone 4.
As for any work discount, I don't think you need to do anything to continue to receive it. I receive a discount for working with the government and I didn't need to do anything when I changed my plan a couple of times before.

Urgent - 'Distribute' Function is reffering to wrong planning area

Similar Messages

Maybe you are looking for