[URGENT!!!] DNS won't resolve. PLEASE HELP!!! [DESPERATE]
guys,
i googled, read the DNS & BIND book (very useful), but still haven't solved my problem and this is killing me as i have spent days and the darn thing simply refuses to work!!! i am desperate and need your help.
i am trying to set up a DNS server on my dual NIC x86 Solaris 10.
1. i am getting confused with naming interfaces. i seem cannot have two network ifaces named like m1.example.com. each one must have its own unique name, right? [pls advise here]
so i name them m1.example.com and m2.example.com respectively. m1 is for router and m2 is for switch (LAN).
m1.example.com - 10.0.0.2
m2.example.com - 192.168.16.1
2. secondly I cannot get the SOA record. what interface should be used as SOA?? i tried m1 as it is "primary" (iprb0) and connects to the internet. however, it didn't work.
i even tried m3.example.com trying to combine two interfaces as below (still won't work):
my db files (excerps, server is down, writing from home) :
DB.EXAMPLE.COM
$TTL 3h
@ IN SOA m3.example.com. admin.example.com. ( 1 3h 1h 1w 1h)
IN NS m3.example.com.
localhost IN A 127.0.0.1
m1.example.com IN A 10.0.0.2
m2.example.com IN A 192.168.16.1
example.com IN MX 10 m3.example.com
m3 IN A 10.0.0.2
IN A 192.168.16.1
DB.10.0.0$TTL 3h
@ IN SOA m3.example.com. admin.example.com. ( 1 3h 1h 1w 1h)
IN NS m3.example.com.
1 IN PTR m3.example.com
DB.192.168.16$TTL 3h
@ IN SOA m3.example.com. admin.example.com. ( 1 3h 1h 1w 1h)
IN NS m3.example.com.
2 IN PTR m3.example.com
DB.127.0.0$TTL 3h
@ IN SOA m3.example.com. admin.example.com. ( 1 3h 1h 1w 1h)
IN NS m3.example.com.
1 IN PTR localhost.the previuous incarnation of the files contained m1 instead of m3 as SOA and NS, but like i mentioned already, it didn't work either.
i am able to ping router 10.0.0.1, but can't surf.
when i nslookup m3.example.com it gives:
Server: 127.0.0.1
Address: 127.0.0.1#53
Name: m3.example.com
Address: 10.0.0.2
Name: m3.example.com
Address: 192.168.16.1and if i nslookup m1.example.com and m2.example.com it gives proper addresses (10.0.0.2 and 192.168.16.1 respectively).
DNS is running and files don't return errors after named-checkzone.
the idea is to make DNS server work for local network (192.168.16/24) and install postfix on top. however i am stuck with DNS at the moment.
please, anybody point me in the right direction - need to get this working by tomorrow!!!!!
many thanks for your replies.
Whats your named.conf look like? Also, google DNS forwarder/forwarding....
Tom de
Similar Messages
-
my router internet connection won't except googles 8.8.8.8. dns why can someone please help me, my router internet connection won't except googles 8.8.8.8. dns why can someone please help me
naaa didnt work if you or any body else has any other ideas im open cuase now im thining about just taking it into apple and getting a new one but my friend said that he recently did the exact same thing and the apple store declined him cuase it was jailbroken sooo i really dont know what to do ....the purpose of getting the knew ipod was to have imessge and the new facetime and know that it isent working i dont know what to do or how to do it the correct way...............but thnk u Eric Ross and llaass
-
A video I paid will not download. I keep getting download error. I have an iPad2 and I have downloaded other movies since buying the one that won't. Please help.
I would restore the iPod to factory defaults/new iPod on your computer and start over. It appears the iPod is associated with another account. Any media that came with the iPod does not belong to you and di not transfer with the iPod hardware.
-
After install ios 7 wifi won turn on please help....
after install ios 7 wifi won turn on please help....
Thanks for the update. I don't know if you have tried this, but I would next I would try removing and re adding the mail account from the phone, then testing the issue again:
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
If it persists, I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with this article:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414 -
I just downloaded the new iOS7 onto my iPhone 5 and now I can not get my iMessage to activate with my Apple ID! My iPad connected just fine but my iPhone won't. Please help
I would go to Settings - General - Reset - and Reset Network Settings
Try it again after the phone restarts -
i have been having trouble my iphone 3gs doesn't work the slide to unlock is broken i have tired everything to get it open but it won't work please help me!
Basic troubleshooting steps are: Restart, Reset, Restore,
-
Canon IP7250 - Color won't print - Please help
I have a Canon IP7250, two day ago, my printer showed me error C000. I resolved this error, but now my printer won't printing in colour. Black working properly. I tried many times to cleaning a toner in mainteace. When I go to "print head alignment" then shows error 2500. ? In nozzle check black colour is excellent but no other colors on paper.
Please, help me.
Thanks.Again, the username/password, would either be your logon username/password or your "root" username/password if you have enabled it.
Another option would be to update your CUPS software. Multi-functional printers are usually "tricky" to get full-featured drivers for. It's possible that a newer version for this particular printer may exist with an update.
Still another option (and possibly a better one) would be to download and install the latest Gutenprint printer drivers. These were formally known as Gimp-Print drivers. (ref: http://gimp-print.sourceforge.net/MacOSX.php3) -
Error BEA 380001 ... Not able to resolve Please help
Hi Guys,
I am getting an BEA 380001 error and the message is "Invoke JCA outbound service failed with application error"
Please help me to resolve this... as i am not able to proceed further.
It's urgent.
Regards,
ArchuPLease find the log message...
<May 31, 2010 12:40:14 PM IST> <Error> <JCA_FRAMEWORK_AND_ADAPTER> <BEA-000000>
<servicebus:/WSDL/CustomerService/Provider/UCP-DB/Resources/PERSON [ PERSON_ptt:
:update(PersonCollection) ]
- Could not invoke operation 'update' against the 'D
atabase Adapter' due to:
JCA-11627
Mapping Not Found Exception.
The mapping [Sender] for descriptor [class BusinessService_IdentityManagerServic
eIteration2_V1_Provider_UCP_DB_Services_CallPersonBS_8760382809275770117_6ce764f
6_128ecbb837a__7fa7_BusinessService_IdentityManagerServiceIteration2_V1_Provider
_UCP_DB_Services_CallPersonBS_8760382809275770117_6ce764f6_128ecbb837a__7fa7.PER
SON.Person] could not be found. The input xml record had an element [Person/Send
er].
Make sure that the input xml is valid relative to the xsd and that the mapping e
xists in the Mappings.xml. If an old version of the descriptor without this mapp
ing has been loaded by the database adapter, you may need to bounce the app serv
er. If the same descriptor is described in two separate Mappings.xml files, make
sure both versions include this attribute/mapping. -
Can't Update to 10.0.1, Bonjour Service Won't Start--PLEASE help!
All I want to do is update my iTunes but I cannot. It won't work from within iTunes, and when I try to do it manually it said "The Service Bonjour Service" won't start." In Services, I could not start it either, though I am admin.
So I deleted Bonjour (from within the Control Panel), thinking that'd take care of it, but it did not. I still get ALL the same messages. I even tried re-installing Bonjour (bonjour64.msi), and I get the same "won't start" message. It's not my firewall--I set that to always allow.
What is going on here? I've searched and searched, but to no avail (though they are plenty of Bonjour problems out there), and I really don't want to uninstall/reinstall iTunes, if that would even do it. I'm new to Apple, and this just makes no sense to me.
Please, help?? THANKS in advance~There are remants of Bonjour in the program files, and I guess I could delete these to clean it up, but I doubt that would make the difference.
Actually, that could make a difference. If there is leftover componentry from the previous version still on the PC when the new version tries to install, the version mismatch could cause trouble with the new service starting. That could then roll back the attempted install.
There's a bunch of different stuff on 64-bit systems for BonJour (there's both 64-bit and 32-bit componentry stashed on a 64-bit system. We'll also try a cleaner version of an uninstall than the Apple instructions provide.
In Computer, open your C drive (or whichever drive your program files are installed on).
Open the "Program Files" folder.
Right-click on the "BonJour" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your program files are installed on).
Open the "Program Files (x86)" folder.
Right-click on the "BonJour" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
Right-click on the dnssd.dll and dns-sd.exe files (if they still exist), and select "Delete".
Go back into the "Windows" folder.
Open the "SysWOW64" folder.
Right-click on the dnssd.dll and dns-sd.exe files (if they still exist), and select "Delete".
Empty your recycle bin.
Restart the PC and try another BonJour install. Any better luck restarting the service this time? -
Help my IPOD won't start PLEASE HELP
It gives me the apple screen and then switches into the foloer with an exclamation point and i don't know how to get it out. I have tried restarting, and plugging it into the computer doesn't do anything. It is charged, please help.
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
TS3274 My iPad screen won't work, please help!
My iPad comes up with a black screen but when I press the lock button twice a blue screen appears with a faint outline of my wallpaper/time/notifications. I have tried resetting it and turning it on and off but nothing seems to be working. I'm travelling overseas next week and I really need my iPad PLEASE HELP!!!!
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Itunes 10 Installs but won't open - Please Help
I had Itunes 10 installed working on my computer. I installed a program which also installed an older version of Quicktime which I think was version 6.5. The next time I tried to open Itunes it said I needed verion 7.5 of Quicktime to open Itunes please reinstall Itunes. Now comes the problem. I have installed and uninstalled Itunes about 10 times, everytime it install ok but does not open when I click on the icon. The itunes.exe file opens in task manager for a few seconds then closes. I have searched a few places for solutions with no avail. I have tried the correct order of removing apple programs and deleting temp folder and internet cache. I have tries msconfig but can't find any of the programs which have affected other users. I have tried creati9ng another user account for windows but Itunes still won't open. Can anyone please help. My computer is Windows 7 32 bit. Thank in advance.
No, the program I installed was Winavi MP4 which coverts video to ipod psp format etc.
Ack, that one's just as bad. It's been causing this sort of grief for iTunes users for over five years now.
What it has probably done here is drop old versions of QuickTime componentry in unorthodox locations on the PC (usually down in your operating system files). So we're going to go looking for that.
First we'll adjust some view settings on the PC.
1. From the Start menu, click Open.
2. In the Organize menu, click Folder and Search Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now, in Computer, open your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
I just upgraded to Yosemite and adobe ilustrator won't open, please help me.
I just upgraded to OS X Yosemite and some of mi CS6 programs won't open. It says to upgrade to Java SE 6. but i can't find it. Please help me
Back up your iPhoto library, Depress the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
LN -
Catalog corrupted, won't repair, please help
My situation is very similar to the on in this post http://forums.adobe.com/thread/472039
Catalog is corrupted and won't repair, I've tried to create a new catalog than import from the corrupted one but nothing.
I'm very depressed and frustrated about it, with this catalog I'm losing countless hours of creative work.
Please help me.
Thanks
PatHi,
thank you for your reply, help and sympathy, the forums really saved my
last days, I was so depressed by this problem and reading about it helped
me to find ways to try to solve the problem.
I feel so stupid about my catalg, really! I believed the XMP sidecar file
was automatically created but I was wrong, I also believed the
modifications were stored somewhere but I was wrong again... all my
countless hours of creative work on my photos is stored in a.... SQLite DB
!!!! I still can't believe it I was so ignorant about the consequence of a
simple power failure or improper shutdown.
My backup is old, I need to recover more recent work,
The XMP sidecar file was NOT active by default and I never cared about it:
STUPID ME.
I'm trying to repair the DB by myself while waiting for an answer by Dan
Tull, it's a SQLite DB in the end.... (I'm working on a copy obviously)
I've managed to open it in LR right now but all the last 500 photos
entries seems damaged, I'm still working on it.... my DB is 380MB circa...
btw
a) just before the failure, I put the catalog on a brand new USB, 500GB
drive (from an old 250GB usb drive) and I've opened it on a not updated
computer (early version of windows XP - never got problems with the old
drive) I fear it doesn't support 500GB filesystems but I'm not sure and
I'll really NEVER attach the disk to this computer again so it will be
hard to investigate. I've no such problem with this drive doing anything
else with my laptop.
b) I'm absolutely sure of it!! because of a severe earthquake in my city
the last 6 of April
(http://www.boston.com/bigpicture/2009/04/the_laquila_earthquake.html),
I've to work on a laptop, my desktop is in a box in a garage and I really
don't know when my house will be completely repaired and I'll back using a
desktop computer; because of this I'm on DEATH SLOW USB drives and you can
imagine what it means to backup 300GB of photos daily or weekly (9-10
hours), btw I think I'll backup my 380MB catalog at every LR start from
now.
Do you know a way to create the XMP of all the mofications from an
existing catalog? Will it be enough to create a complete catalog?
Thank you very much.
Pat
You have my sympathy! I am constantly in fear of losing my work due to a
software or hardware problem. There are so many things that can go wrong
and we are photographers first, not computer operations people.
Â
Did you try the ideas listed in the thread you referenced: restoring from
a backup or making a new catalog from the adjustments and metadata stored
in the XMP information in the pictures? If neither of those work then a
manual repair of the catalog by an expert is the last option. That would
be hard for me as my catalog is over 1GB.
Â
Once you have recovered your stuff I suggest you look at a) why it
happened. For example do you need a new hard drive? and b) a better
backup plan so if disaster strikes you can restore easily and without
stress.
Â
Good luck.
> -
Urgent issue on idoc?please help me
Hi All,
I have given a variant for a print program to generate idoc.
It is a standard program i am having a customer exit.
i kept breakpoints in my customer exit and executed teh variant.It didnot stop at my breakpoints and generated teh idoc.
I have checked in the transaction F110 and idoc has been created.
Now again i want to run the same variant and generate the idoc again as i need the program to stop at my break point so that i can analyse and change the code.
now i need the process to regenerate the idoc so that i can execute the same variant and make that program to stop at my variant.
can anyone please help me.
Please tell the process to regenerate teh idoc.
I need it urgent
My Second and actual problem for which i need to debug is:
The print program to create the IDocs is RFFOEDI1.
The aim is:
=> The value in the segment E1EDP02-BELNR has to be removed (so segment has to be empty) when:
Company code = 1760 (E1IDKU3- PAYRUNCC) or (REGUP-ZBUKR)
Payment method = F (E1IDKU3- PAIRZAWE) or (REGUP-ZLSCH)
This can be done via the existing Customer exit : ZXF08U06.
I was not able to execute this program and debug.i kept break-points in customer exit for this data but still it is not stopping at my break-point and executed a idoc.now to run the same data ,i was not able to do it.If any one can help me it will be great.
Thanks in advance
Edited by: Aravinda Enakula on Jan 25, 2008 3:38 PMSee if anything in this Link applies to your situation...
http://support.apple.com/kb/TS1420
http://www.apple.com/support/iphone/syncing/
Maybe you are looking for
-
HT3805 How can I adjust the pixel size of a photo
I wish to upload pictures to a site and they have requested min size 40 x 40 max size 200 x 200 I assume this is pixel size but can find no way of doing this in Aperture. Surely this is a common enough request?
-
How to calculate first date and end date of this year in Query
Hi Expert I want to calculate following dates with inputted date in query. I have no knowledge on ABAP and I just can create a query with simple logic. Could you teach me how to calculate following date? (If inputted date is April 12 2009) - First da
-
Ok guy's bit of a silly one ! created new root suffix, now trying to create new root object, however getting error mesage, must be Directory Manager, now, this is the strange bit !, I am directory manager. Any ideas ? TIA
-
Not able to import Accounts in SRM 5.0.3
Hi All, I am not able import accounts in SRM 5.03. I get the following warning when i try to import the following records. "ravi.g","AdminServerDev1Application","adminserverdev1.com" "jaykay.b","AdminServerDev1Application","adminserverdev1.com" The s
-
Auto assign vlan for Wireless AP 1142
Hi, Instead of statically assigning a vlan to a switch port where the AP is connected, is there a way to use 802.1x or NAC to assign the right vlan to an AP itself (not the clients)?