URGENT- DOING MEMORIAL VIDEO sound and video are off when sent to iDVD

I watch the video in iMovie and the sound and video are in sync. When I send to iDVD, the two are no longer in sync. I have made changes to the iMovie project since my last DVD burn. With the initial burn, there were no sound issues.
I've tried all of the following:
1. closing and reopening iMovie and iDVD
2. resending from iMovie to iDVD
3. readding the clip and removing the original clip from the iMovie project
4. restarting my computer
The only things I have not done are the following:
1. redownloading the original video clip from my camcorder
2. recreating the project
3. trying a different project to see if that one has the same audio/video issue (this will be my next step)
#2 above is literally so intense as I have a lot of editing on this. To make it clear to you, I have video footage of a memorial.... and after the memorial I chose little 20-30 second clips here and there. I don't have audio with those clips -- just iTunes music overlay.... so, those I don't need to worry about sound coinciding.... just the 30 minute clip that is the actual memorial service.
This is time sensitive.... it is a memorial video and I don't have time to redo the thing from the beginning, especially considering how long it took me to find those 20-30 second clips of the post-memorial.
Please help!

Yes... I had seen that.... and, yep, have the latest software.... and even rebooted my machine thinking that maybe it hadn't been restarted since the update (can't remember how long ago the update was).
I did a test run with a mobile size (it takes over an hour when I share with iDVD, which has been annoying with all my attempts to "fixing") file sharing with media browser and still the sound was not matched.
I started another project alltogether in iMovie and it does not have the sound issue when sent to iDVD....
I can copy and paste the more difficult editing I did between the "bad original copy" and my "do-over"... but, it seems to not copy exact length of each clip (it decreased it by a second each clip on the ones I copied over but that is weird since it did copy over the slowed % I had on the original) ..... see the more complex editing I have has the sound silenced and I have music overlay on that....
I have many more to go... and can't copy text directly from one project to another... in fact, there is a lot you can't just copy over.... I have to redo the music, special effects etc. This is not going to be a walk in the park if I can't find a way to make my "bad original copy" work.
Still looking for more suggestions (than to start all over), but will have to start over if I spend too much time making the one I have work.... then it becomes more sensical to just start over. I have quite a bit of time in the original, but if I can copy and paste the clips, that takes a majority of the work out.... but, if any of my copy and pastes somehow "corrupt" the sound sync on the portion that isn't silenced and music overlaid, then, there is a lot of work having to recreate all my edits from scratch.

Similar Messages

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I manage my site (containing all the media) in order to upload it to a server?
2.- Is there a Adobe Muse community in spanish language?
Thanks for your help
Mauricio444

Kevin is suggesting that you store the projects you create while working through his book in a folder called RoboHelpProjects. It is not where you have to store every project you ever create.That is for the purposes of his book.
RoboHelp initially defaults to My RoboHelp Projects but it's up to you whether you do. Generally on the forums we advise against that as it is part of your profile and can result in excessively long path names in a few cases. Generally where authors create file names that are so long they almost serve as the content.
Projects always have a root folder, call them Project 1 and Project 2 for this purpose. You can have those folders directly off your C drive (or other local partition) or within in a parent folder as above.
Now to what you can and cannot do. You can delete a whole project by selecting Project 1 or Project 2 in Windows Explorer. Obviously if you delete the parent folder you will delete all your projects within.
What you must not do is delete individual files within a project using Windows Explorer, for that you use RoboHelp's Project Manager. The exception is if you go to Tools > Reports there is a report Unused Files. Files listed there will have to be deleted using Windows Explorer for the very good reason they do not appear in Project Manager and, therefore, cannot be deleted that way.
If you think about it, it is similar to Word. There is no option to delete a document there other than using File > Open and right clicking. Not very intuitive.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I have a number of apps on my Ipad2 that no longer have sound. I have checked setting on my ipad and the settings on the apps that have a settings and the sound and volume are ok. Do I have a virus in some apps?

I have a number of apps on my ipad2 tha no longer have sound. I have checked the ipad settings and the apps that have settings and all sound and volume are ok. Do I have a virus? Pandora sound is ok. It seems mostly to be games...angry birds, tap tap, and educational games for little ones. Any suggestions?

There aren't any viruses for iOS devices. Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.

Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Why does my video suddenly freeze when playing ?

why does my video suddenly freeze when playing ?

Which app are you using to play the videos? Which version?
Are these offline or browser videos? Both?
Videos flash based?

HT201342 Why does this concern me and what are the advantages?

Why does this concern me and what are the advantags to @Icloud.com?

It is not an address change but an addition to your current @mac.com, @me.com email addresses. Use whichever one you prefer.

I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do?

I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do? do I just need a new screen or what? I'm freaking out here

Don't freak out, just get over it. It's probably done.
What should I do if I drop my phone in the toilet?
Apple may offer you an refurbished iPhone in exchange for yours, for about half the cost of a new one.
I wouldn't be too specific about just how it got wet

What does memory low mean and what can I do?

what does memory low mean and what can I do?

The iPad is low on RAM which is the memory that the operating system and apps need to run smoothly and efficiently. You can close apps and that might help. Restarting or rebooting the iPad might help as well.
To close you apps, tap the home button. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I have a imac g3 dv se, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes

i have a imac g3 dv se,500mhz, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes any suggestions?

Actually sounds like classic symptoms of a failing PAV (power-analog-video) on that model. Historically that's the weak spot in the G3 iMacs.
The lack of active cooling in the G3 iMac puts a lot of heat stress on this board and they eventually fail from overheating. Right now the board is still working as long as it's cool--it only fails when temps inside the computer rise.
About the only way to preserve the computer's life is to mount a 120mm fan directly on the case where the handle is--that's the exhaust port. The fan has to be positioned to PULL air out through that vent. It's an ugly solution to the eye but it has been done around here more than you would think.
Also make certain the bottom of the computer is not blocked. It the computer is sitting on a tablecloth or placemat, or there are loose papers on the desk under the case, it cannot get enough air into the bottom-mounted air intakes. Make/find some blocks to set the iMac a minimum of one inch (2.5CM) from the desk and move anything that can be "inhaled" from under the computer.
Even with such measures, the PAV board will eventually fail and be unrecoverable. It's a good time to start saving for a newer computer.

Phone freezes and turn itself off when the "Ph. se...

I got a Nokia n97 mini 2 weeks ago and the phone works great except that sometimes it would turn itself off and when I turn it back on it lags and freezes. I notice every time the phone freezes and turn itself off when the "Ph. setup" in the App menu is running. Is the device updating itself? How can I make it stop? Everything freezes as soon as the Ph. setup starts running.
I try waiting it out (if the phone is setting something up it shouldn't take more than a few minutes) but I leave it there for several hours and it's still frozen.
Thanks for reading -sorry if my English sucks-

Fireemt125 wrote:
Is there a way to turn Siri off when phone is locked
Settings > General > Passcode Lock.
FYI: Siri can only do certain things when locked. It will not do anything that requires the iPhone to be unlocked (without first unlocking the iPhone).

Does iMovie have Sound and Video Effects?

Before i begin filming my college film i wanted to ask and see if imovie has sound and video effects. what i mean is like, say in the film a gun is shot, well does imovie have a shot going off sound? are there sound effects? or am i asking in the wrong place and see if garageband has these?
also, video effects? i know imovie has like sepia and black and white tones among others but can i add other types of effects? if so, what kinds?
thanks!

you're looking for specific effects for your specific needs.. why not launching iM on your MacBook.. and look for your own..???
BEFORE doing a "serious" project, I would allway do some test/dummy projects, just to get comfortable with some software ...
plus:
the two additional audio tracks allow easiely to place small audio snippets, downloaded from anywhere in the web to your movie.. if you need explosions, gunshots, lightsabres, whatever, the iNet is full of sources...
plus:
you can teach iM lots of new tricks by installing/purchasing 3rd party plug-ins, if you need very special effects , iM does not support out-of-the-box.
plus:
http://www.apple.com/ilife/tutorials/imovie/index.html

Youtube videos are grey when Fullscreen and updating Real Player doesn't help

Youtube videos are grey just like you describe them in "Flash 11.3 doesn't load video in Firefox" but updating RealPlayer does nothing to help.

RealPlayer includes a Web Download & Recording feature that adds a Browser Record Plugin extension to Firefox. This causes problems with Flash content if Flash Player 11.3 is installed. If you don't use this feature, you can turn it off to avoid problems (see Flash 11.3 doesn't load video in Firefox). If you want to keep using this feature, another option is to uninstall Adobe Flash Player 11.3 and install an earlier Flash version as a temporary solution. See How do I revert to a previous version of Flash Player? on the Adobe forum for detailed instructions and download links. (Adobe's uninstaller removes the Flash Player ActiveX for Internet Explorer as well as the Flash Player Plugin for Firefox and other browsers, so you will need to reinstall both.)

My computer keeps doing the usb sound and freezes

My computer keeps doing the usb plug and unplgu sound, and when it does, the computer freezes. I have tried update all drivers, and run one-key recovery but nothing helps. The system event logs only show one error:
The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS.
I tried to update BIOS driver and found it was up to date. Does anyone eles have the same problem? It is very frustrating expecially when you are in the middle of a game. Please Help!

I understand what you mean about the sound now. I was thinking of something else. Sorry for the mis-understanding.
Are these errors showing up in the System Event Log happening repeatedly ? If there is just one or two of the same error showing up during the session you are on the computer that maybe normal. As the operating system is working it will occasionally hit a glitch that produces an error in the log, but later in the log you will find where the problem was resolved. The Event Log is never error free. If an error is repeatedly recorded then it is a problem.
You can also look at your Reliability History which might indicate a problem. Go into Control Panel then System Security then Action Center then click on Maintenance and then choose View Relibility History.
If your remembered when the problem started, did you trying doing a System Restore to a date prior to the problem starting ?
You mentioned One Key Recovery. Did the recovery process not correct the problem or did One Key Recovery not work at all ?
Try booting the computer into Safe Mode and see if the problem is happening there.
Also try logging into the computer using another User account. If no other accounts are available then create a new User account to try it. If the other User account is problem free then suspect your original account has corruption.
On my Windows 7 system the sound event for connecting a device like a USB flash drive and disconnecting the flash drive sounds about the same. Also the sound event for a device failing to connect will produce the same sound in my present sound scheme. Try plugging in your keyboard and mouse several times to insure they have a good connection or even try plugging them into another USB port.
Also try another mouse and keyboard if you have them available. Since you are a gamer chances are the mouse and keyboard are well used and might be failing.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

T42P. Does not boot/startup. Black screen. All indicators except the battery and power are off.

Hi all,
I am new to the forum and so very desperate for help!
I have a T42P (2373-C61) machine. All of the sudden today, it blue-screened. I turned it off, then tried to turn it back on.
Now, it is not coming up at all. I can not even get to the BIOS or see anything in the screen!
All the lights/indicators are off except these two: the battery/power and the little z (the on indicator).
The NumLk and Caps Lock indicators flash every 15 seconds or so.
The hard drive, bluetooth, and wireless lights are off completely.
Tried getting to the BIOS by unplugging the battery and using the AC only but nothing happens when I press F1 or the IBM button.
Also, tried a suggestion from other users that requires unplugging Battery/AC, pressing Power button 10 times, then the 11th time for 30 sec. Still nothing happens.
No HW/SW was added to the machine recently...
Any suggestions is appreciated..

It can also be the LCD itself...
BTW, if the graphic card has failed that equals motherboard replacement since it's soldered to the planar...
Let's hope not...
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

URGENT- DOING MEMORIAL VIDEO sound and video are off when sent to iDVD

Similar Messages

Maybe you are looking for