Urgent!! dump in test system
hi!
i have a dump only in test system (not in dev or prod)
in transaction IW52 when pressing icon repair order.
the dump occurs in program SAPLZM06 in include LZM06U01
when calling screen 5000.
when i checked the screen inside the sap program SAPLZM06
it says: flow logic in screen 5000 is empty, but it does
so in all system.
when i put breakpoint inside the fm it stopped only in test system not in dev or in prod.
i assume that in dev or prod it doesn't rich the FM and that's why there is no dump.
i wanted to know how the program decides if to go the fm.
regards
yifat
Hi Yifat,
1. Custom Development
SAPLZM06 (ZM06)
The above says that it is a customer-development.
2. Check out all the related
transport requests (and their objects)
3 This usually happens when
transports are not COMPLETE.
IE. All objects are not transported.
Some objects may be in another request !
Regards,
Amit M.
Similar Messages
-
For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero -
Urgent:: How to transport customer exit from dev to test system?
Hi,
We have created a Customer exit in our development system in the $tmp package, and we want to transport it to our test system. Can you please tell us how to proceed on this. We are not able to change the package as our package is a development package and so does not start with Y or Z.
Best Regards,
Charu.Your package is RSR right.. this is the package for the function group XRSR where in this user exit exists.
you need to have a separate development class either starting with Y or Z. If not, ask any developer or your sap basis team to create one for you. then you can assign this development class to your user exit.
To check this, go to SE38 - enter your program name ZXRSRU01, display, in the menu "goto", CHECK "object Directory entry", you should have this development class.
Hope this helps.
Shakeel. -
Working on BBPCRM 3.1 having this dump when testing web pages. Page contains the typical start pages of SAP hello world and a simple button...
Runtime Errors TEXTENV_INVALID
Exception CX_SY_LOCALIZATION_ERROR
Occurred on 19.09.2005 at 09:48:01
Error when generating text environment.
What happened?
What can you do?
Error analysis
How to correct the error
System environment
User, transaction...
Information on where terminated
Source code extract
001550 DLI_UPDATE = 'X'
001560 UPDCHK = 'U'
001570 EXCEPTIONS
001580 OTHERS = 1.
001590 COMMIT WORK.
001600 WHEN OTHERS.
001610 ENDCASE.
001620 ENDIF.
001630
001640 ENDIF. " updchk = c
001650
001660 * update the data
001670 IF UPDCHK EQ 'U'.
001680 IF FOL_UPDATE NE SPACE.
001690 * update for folder definitions
001700 PERFORM V_SOFD_PUBSEL(SAPFSSO6)
001710 TABLES V_SOFD_TAB
001720 USING RCODE.
001730 PERFORM SOFIND_SELARR_ALL_FOL(SAPFSSO6)
001740 TABLES SOFIND_TAB
001750 USING RCODE.
001760 SORT SOFIND_TAB. " yxu170797
001770 LOOP AT V_SOFD_TAB INTO V_SOFD_REC.
001780 CLEAR SOFIND_REC.
001790 MOVE: V_SOFD_REC-MANDT TO SOFIND_REC-MANDT,
001800 FLN TO SOFIND_REC-TYPE,
001810 V_SOFD_REC-OBJNAM TO SOFIND_REC-OBJDES,
001820 V_SOFD_REC-FOLTP TO SOFIND_REC-OBJTP,
001830 V_SOFD_REC-FOLYR TO SOFIND_REC-OBJYR,
001840 V_SOFD_REC-FOLNO TO SOFIND_REC-OBJNO.
> SET LOCALE LANGUAGE V_SOFD_REC-OBJLA.
001860 TRANSLATE SOFIND_REC-OBJDES TO UPPER CASE.
001870 SET LOCALE LANGUAGE SPACE.
001880 READ TABLE SOFIND_TAB INTO SOFIND_TAB_REC
001890 WITH KEY MANDT = SOFIND_REC-MANDT
001900 TYPE = SOFIND_REC-TYPE
001910 OBJDES = SOFIND_REC-OBJDES
001920 OBJTP = SOFIND_REC-OBJTP
001930 OBJYR = SOFIND_REC-OBJYR
001940 OBJNO = SOFIND_REC-OBJNO
001950 BINARY SEARCH.
001960 IF SY-SUBRC NE 0.
001970 APPEND SOFIND_REC TO SOFIND_INS_TAB.
001980 ELSE.
001990 DELETE SOFIND_TAB INDEX SY-TABIX.
002000 ENDIF.
002010 CLEAR SOFIND_REC.
002020 MOVE: V_SOFD_REC-MANDT TO SOFIND_REC-MANDT,
002030 FLD TO SOFIND_REC-TYPE,
002040 V_SOFD_REC-OBJDES TO SOFIND_REC-OBJDES,
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 2
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY
SY-UCOMM SY-TITLE Update control
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
6 FUNCTION SO_SOFIND_UPDATE
SAPLSOC3
LSOC3U11 185
5 FORM SO_SOFIND_UPDATE
SAPLSOC3
LSOC3V11 35
4 FORM VB_CALL_FUNC
RSM13000
RSM13000 5441
3 FORM VB_V1_EXEC
RSM13000
RSM13000 5182
2 FORM VB_V1_NORMAL
RSM13000
RSM13000 3944
1 MODULE (PBO) VBEXEC
RSM13000
RSM13000 3793
Chosen variables
6 FUNCTION SO_SOFIND_UPDATE
SAPLSOC3
LSOC3U11 185
DLI_UPDATE
2
0
FOL_UPDATE X
5
8
UPDCHK U
5
5
V_SOFD_TAB Table IT_1[2x141]
RCODE 0
0000
0000
SYST-REPID SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
SOFIND_TAB Table IT_2[2x73]
ROLE_MAILER 4
3
4
V_SOFD_REC 100FOL28000000000001 D#
3334443333333333333322222222222222222422
1006FC2800000000000100000000000000000430
... + 40 #
2222222222222222222222222222222222222222
0000000000300000000000000000000000000000
... + 80 Q 0
2222222222222222222252222222222222222223
0000000000000000000010000000000000000000
... + 120 000120050808 20050808
333333333333233333333
000120050808020050808
VWST VWST
5555222222222222222222222222222222222222
6734000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC 100FLN#
3334442222222222222222222222222222222222
1006CE3000000000000000000000000000000000
... + 40 FOL28000000000001
222222222222222244433333333333333
00000000000000006FC28000000000001
SENDMAIL_TOKEN_NOT_FOUND 90
0005
000A
USDI USDI
5544222222222222222222222222222222222222
5349000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SPOOL_READ_ERROR 56
0003
0008
SY-REPID SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
SOFIND_REC-OBJDES #
2222222222222222222222222222222222222222
3000000000000000000000000000000000000000
... + 40
2222222222
0000000000
V_SOFD_REC-OBJNAM #
222222222222
300000000000
SCR SCR
545
332
USRE USRE
5554222222222222222222222222222222222222
5325000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
OBJ OBJ
444
F2A
USSA USSA
5554222222222222222222222222222222222222
5331000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
URL URL
554
52C
USSI USSI
5554222222222222222222222222222222222222
5339000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_DUMMY$$
2222
0000
DX40 DX40
4533222222222222222222222222222222222222
4840000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_TAB_REC
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
222222222222222222222222222222222
000000000000000000000000000000000
ATTA ATTA
4554222222222222222222222222222222222222
1441000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
OFFICE_TASO13 SO13
5433222222222222222222222222222222222222
3F13000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC-MANDT 100
333
100
OFFICE_TASO14 SO14
5433222222222222222222222222222222222222
3F14000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC-TYPE FLN
444
6CE
OFFICE_TASO15 SO15
5433222222222222222222222222222222222222
3F15000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
5 FORM SO_SOFIND_UPDATE
SAPLSOC3
LSOC3V11 35
ROLE_SUBST_ACTIVE 3
3
3
%_STATE Y
5
9
%_PRINT 000
2222333222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 0 ########
2222222222320000000022222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 0 ####
222222222222223222222222222222220000
000000000000000000000000000000000000
URLA URLA
5544222222222222222222222222222222222222
52C1000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_KEY 432D0497CD9B3890E1000000AC101A01####
333433334434333343333333443334330000
432404973492389051000000131011010001
SY-SUBRC 0
0000
0000
REMA REMA
5444222222222222222222222222222222222222
25D1000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000001 X
5
8
RERE RERE
5454222222222222222222222222222222222222
2525000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000002
2
0
REPA REPA
5454222222222222222222222222222222222222
2501000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000003 U
5
5
SY-XFORM
222222222222222222222222222222
000000000000000000000000000000
4 FORM VB_CALL_FUNC
RSM13000
RSM13000 5441
SAVE_VBPARAM #
0
3
VBPARAM 432D0497CD9B3890E1000000AC101A010001SO_S
3334333344343333433333334433343333335455
4324049734923890510000001310110100013FF3
... + 40 OFIND_UPDATE PSAKINDI 10
4444455544542222222222222255444444222233
F69E4F50414500000000000000031B9E49000010
... + 80 0### ##
3000222222222222222222222222222220022222
0612000000000000000000000000000001100000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222
0000000000000000000
VBHDR-VBTCODE SO00
54332222222222222222
3F000000000000000000
VBHDR-VBREPORT SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
VBMODCNT 1
0000
0001
DLDE DLDE
4444222222222222222222222222222222222222
4C45000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBPARAM-VBPHASE 16916512
0
1
VB_V1_TEST #
0
2
SYST-REPID RSM13000
5543333322222222222222222222222222222222
23D1300000000000000000000000000000000000
HGEN HGEN
4444222222222222222222222222222222222222
875E000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
IS_A_ARFC #
0
0
TH_TRUE #
0
1
OFFICE_TASO00 SO00
5433222222222222222222222222222222222222
3F00000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
TH_FALSE #
0
0
VBDEBUG 35659808
0
2
VBSELECT-VBANZAHL 00000
33333
00000
EWST EWST
4555222222222222222222222222222222222222
5734000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
BACK BAC
4442222222222222222222222222222222222222
2130000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
TFDIR SO_SOFIND_UPDATE SAPLSOC3
5455444445554454222222222222225454544322
3FF3F69E4F50414500000000000000310C3F3300
... + 40 1100000000
2222222222222222222222222222223333333333
0000000000000000000000000000001100000000
... + 80 S 1
52222222222223
30000000000001
TFDIR-PNAME SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
VBFUNC SO_SOFIND_UPDATE
545544444555445422222222222222
3FF3F69E4F50414500000000000000
%_DUMMY$$
2222
0000
VBID 432D0497CD9B3890E1000000AC101A01####
333433334434333343333333443334330000
432404973492389051000000131011010001
VBSTAT-PROC2_REQ
222222222222222
000000000000000
VB_UPDATE_MODUL_PROCESSED #
1
C
3 FORM VB_V1_EXEC
RSM13000
RSM13000 5182
ROLE_SUBST_ACTIVE 3
3
3
VBMOD_TABL-VBMODE 1
3
1
VB_COLLECTOR_FB 5
3
5
SY-REPID RSM13000
5543333322222222222222222222222222222222
23D1300000000000000000000000000000000000
LISL LISL
4454222222222222222222222222222222222222
C93C000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
EXISTS_COLLECTOR #
0
0
VB_V1_FB 1
3
1
VB_V1_NO_UPD_AGAIN_FB 3
3
3
VBHDR-VBSTATE -16759503
F
F
VB_V1_PROCESSED #
0
1
VB_V1_AND_V2_PROCESSED #
0
2
SYST ########################################
0000000000000000000000000000000000000000
0000000000010002000000000000000000000000
... + 40 ########################################
0000000000000000000000090000000000000008
00020000000100000001000A000000000000000D
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
... + 120 ########################################
0000000000000000000000000000000000010009
00000000000000000000000000000000000B0000
... + 160 ################X ############# E0 3
0000000000000000520000000000000222432223
0000000000000000800010000C0000C000500003
... + 200 000 N ####__S 100
3332222222420000555222222222222222223332
0000000000E00000FF3000000000000000001000
... + 240 00
222223322222222
000000000000000
MTAS MAS
4452222222222222222222222222222222222222
D130000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBMOD_TABL-VBKEY 432D0497CD9B3890E1000000AC101A01
33343333443433334333333344333433
43240497349238905100000013101101
VBMOD_TABL-VBFUNC SO_SOFIND_UPDATE
545544444555445422222222222222
3FF3F69E4F50414500000000000000
VBMOD_TABL-VBMODCNT 1
0000
0001
LOC_VBPARAM-VBPHASE 16916512
0
1
LOC_VBPARAM-VBDEBUG 35659808
0
2
READ READ
5444222222222222222222222222222222222222
2514000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
EXISTS_V2 #
0
0
SPACE
2
0
NEW_VBSTATE 0
0
0
VBHDR 432D0497CD9B3890E1000000AC101A01100PSAKI
3334333344343333433333334433343333355444
43240497349238905100000013101101100031B9
... + 40 NDI SAPLSOC3
4442222222222222222545454432222222222222
E490000000000000000310C3F330000000000000
... + 80 SO00
2222222222222222222543322222222222222222
00000000000000000003F0000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 ###�sapzoo_SMG_00
22222222222222222222000F7677665544533222
00000000000000000000000F310AFFF3D7F00000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240 :E:
222222223432222
00000000A5A0000
OFFICE_TASO18 SO18
5433222222222222222222222222222222222222
3F18000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
LOC_VBPARAM 432D0497CD9B3890E1000000AC101A010001SO_S
3334333344343333433333334433343333335455
4324049734923890510000001310110100013FF3
... + 40 OFIND_UPDATE PSAKINDI 10
4444455544542222222222222255444444222233
F69E4F50414500000000000000031B9E49000010
... + 80 0### ##
3000222222222222222222222222222220022222
0612000000000000000000000000000001100000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222
0000000000000000000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
SY-XFORM
222222222222222222222222222222
000000000000000000000000000000
2 FORM VB_V1_NORMAL
RSM13000
RSM13000 3944
VBHDR-VBCLIINFO #
0
0
VB_SYNC_VB #
0
1
%_ARCHIVE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
SY-MSGID
22222222222222222222
00000000000000000000
ROOM_TAPP30 PP30
5533222222222222222222222222222222222222
0030000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
ADMI ADM
4442222222222222222222222222222222222222
14D0000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SY-MSGNO 000
333
000
NOTE_NOT_ADDED 11
0000
000B
SY-MSGV1
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV2
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV3
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV4
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
LOGO LOG
4442222222222222222222222222222222222222
CF70000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBHDR 432D0497CD9B3890E1000000AC101A01100PSAKI
3334333344343333433333334433343333355444
43240497349238905100000013101101100031B9
... + 40 NDI SAPLSOC3
4442222222222222222545454432222222222222
E490000000000000000310C3F330000000000000
... + 80 SO00
2222222222222222222543322222222222222222
00000000000000000003F0000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 ###�sapzoo_SMG_00
22222222222222222222000F7677665544533222
00000000000000000000000F310AFFF3D7F00000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240 :E:
222222223432222
00000000A5A0000
1 MODULE (PBO) VBEXEC
RSM13000
RSM13000 3793
VB_V1_NORMAL #
0
1
%_SPACE
2
0
STOP RET
Hi Stephan,
unless we don't ask for it, please do not post this much content. This might be suitable for support messages, but not for this forum. There might be situations where you get asked for more information, but a post like this one just scares of anyone who might know an answer.
Also, your thread title does not give any information on your problem, as a "dump when testing web pages" can be anything.
I would suggest to re-state your question, just giving the information that others need.
I haven't worked with CRM, but I wonder if this is a custom application or a shipped one. -
Transport planning book from Production to Dev/ Test system
Hi APO Gurus,
I need clarity for below mentioned point u2013
I have a correct planning book in production system. I have a different structure in testing as well as in quality system. I want to transport planning book with all data views and macrou2019s associated with it to development system (or in test system).
How to do this? Please elaborate with details
Thanks in advance.I did the transport from Production to Dev client using TSOBJ last week. Basis team helped in connecting Prod and Dev clients.
Everyting went ok except selection IDs. When I check 'with selection transport' in TSOBJ, it ends up in short dump saying Timed Out in reading SQL table /sapapo/sdpsetde. We increased the system profile parameter "rdisp/max_wprun_time" from 1800 seconds to 3600 seconds. It still timed out with same message. So, I created the transport without selection IDs and it worked.
Next, I downloaded the only required selection IDs (total 498) from the DP Planning Area in Production client to excel spreadsheet using table /sapapo/TS_SELKO. Then created another transport using TSOBJ.....this time I used the 'Transport of Selections' section for Selection IDs and used single value selection from drop down, uploaded the IDs from clipboard option. That worked.
Although my problem is solved....but by any chance, has anyone encountered that TSOBJ Timed out? Is there any OSS note for this?
-Sachin -
UNCAUGHT_EXCEPTION in SOAP TO PROXY scenario dump in ECC system.
Hi Experts,
My scenario is saop to proxy .while performing testing the scenario using saopui. iam getting client_send_failed error in sxmb_moni.
but data processed to ecc system and updated the data in database level and giving dump in ecc system.
i am getting dump like below.
UNCAUGHT_EXCEPTION.
we increased the size of instance profile parameters also upto 500 mb .in rz10.
still getting dump.
Please give the solution for above.
Regards
Ravinder.sHi All,
We resolved the issue using below notes and my system is newly upgraded its not accepting asynchronous scenarios with quality of service as BE in sender communication channel.
1966422 - XI runtime: Dump: synchronous proxy calls asynchronous interface
Thanks for all. -
BP creation terminates with NO_ACTIVE_TAB dump in EHP system
Hi,
BP creation terminates with NO_ACTIVE_TAB dump in EHP system.
Dump Descp:
A RAISE statement in the program "CL_BUS_TABSTRIP===============CP" raised the exception
condition "NO_ACTIVE_TAB".
Unable to find SAO Notes for this.
Please guide.
Regards,
HemaHi,
> "The check report specified in the source code correction tests screen sequence BUP001 (Standard business partner screen sequence of the new interface, Transaction BP) for the existence of the assigned screens.
The check report (ZZBDT_CHECK_SEQUENCE_ELEMENTS ), specified in the source code correction, tests screen sequence BUP001 (Standard business partner screen sequence of the new interface, Transaction BP) for the existence of the assigned screens.
In other words, the reports mentined in the correction, tests the screen sequence BUP001 for the existence of the assigned screens.
Rajeev -
Open and close posting periods on test system
Hello together,
to open and close posting periods is only allowed on the develepment und the production client, but not on the test client.
It is an customizing object, but the flag "current settings" is set, so you also can change the settings on the production system.
In the test system, it only can be changed by opening the system for customizing using SCC4 und change to "Changes without automatic recording".
Is there a way to allow open and close posting periods on the test system without opening the client for customizing?
Regards,
MichaelHi Michael,
Please, refer to the note 356483. Proceed as following:
Call transaction SE54
Enter the Customizing object (view or table)
Select "Generated objects"
Choose "Create/change"
Select "no, or user, recording routine" in the bottom part of the screen
Save the change
The view in your case is V_T001B.
Regards,
Eli -
The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer -
Probelms while replicating Data Source and transport into test system
I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM -
How to setup a BW test system?
Hi
We are having R/3 and now we are planning to install BW. Now a few questions are coming to us like...
1. In what cases we need a test system? Can we bypass test system and have development and productive system only?
2. How to setup a test system? Should we reload data from R/3 test system or can it be sourced from BW Productive system (in order to get more historical data)?
3. Has anybody setup a test system and loaded data from BW Productive system before?
Any suggestions will be highly appreciated.
Regards,
PunditHi Arjun,
It is depends on client, for eg:say if client follows Sixsigma processes, then give much importance on Quality. So in this scenario it becomes much clear to have Quality box, If for other clients who don't have much Quality processes in place. you can take up the Quality (test) in Development box itself.
And it also depends on data you want have test on. For some clients they move much of their historical data for testing purpose..
Also some clients mainatain all 3 boxes(Dev,QA & Prod.)in sink..so that it would be easy for any changes or whatsoever.
Hope this helps...
Best Regards,
DMK
*Assign points if it helps... -
OSS note is not working in production but works correctly in test system .
hello friends ,
weh have implemented one OSS notes , which is working corectly in Test system , but not working in production .
Could you please let me know , what could be the reason ?
OSS note no 1064273-
Regards,
ManojPls. check with Basis if the OSS note has been implemented properly and successfully.
-
Strange problem in report Execution in test system
Hi,
As something strange going on my program in test system.
1) Executing the program in Development system using SE38->program name->F8. the program executes and display selection screen fraction of seconds.
issue:
When i am doing same process in TEST System(using SE38->program name->F8) the execution process is min 1 or 2 min , then i am gettign the Selection screen.
I have checked other programs in TEST System but it doesnu2019t happen to any other programs on TEST system.
Program functionality--
i am using 2 table and MARA and Z table, Using Selection screen i am extracting the data into output screen and excel download
Dispaly
1)if user select the Radio button output to screen in selection screen
Display data into screen using some color formatted
2)if user select the Radio button output to file in selection screen
I am using OLE Automation Controller to get the Output excel download some color formatted data
please let me know how to rsolve this type of isssue in Test system...
plz respond when you find the time.
Regards,
AS
Moderator Message: Urgency downgraded.
Edited by: kishan P on Apr 13, 2011 11:59 AMYes ..
INITIALIZATION. Event i have written code like free the objects ans clear Work Area and Refresh the Internal tables
And
*-to highlight the comments on selection-screen
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RM1'.
SCREEN-INTENSIFIED = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Add entries to get the search help values
PERFORM SEARCHELP_REGION.
PERFORM SEARCHELP_COUNTRY.
At selection screen event i am getting the search help for the region and country
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_REGN-LOW.
*Search help for Region
PERFORM SEARCHHELP_REGN_F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CTRY-LOW.
*Search help for Country
PERFORM SEARCHHELP_CTRY_F4.
using FM :*FM for F4 help for returning the value to be displayed
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
Please let me know is it couse problem in TEST System....
so how to resolve the issue...
Regards,
SR -
Cannot find the Web Content repository in test system under KM Content
Hi Experts,
We have implemented Web Page Composer in our development landscape. I have created a web page with the required content in the development and now wish to transport this web page and its content to our test system.
However when I navigate to Content Administration -> KM Content, inside the root directory I am not able to find the Web Content repository within which all WPC content resides.
I want to know what configuration has to be done in the test system so that the Web Content repository becomes available within KM Content.
Thanks and Regards,
SaurabhHi,
I just want a confirmation on whether I will have to deploy the .SCA file for Web Page Composer in my test and production systems to be able to use the web pages I have created in the development environment.
Regards,
Saurabh -
BSP pages in test system after transport have same URL as development
Hi. I have just transported some BSP's from our development into our test system and have encountered a problem.
The URL's of each page is the same as it was in the development system, so when we try and use the pages in the test system we get a "service can not be reached" error.
I am relatively new to BSPs and this is the first time I have transported them. I presumed the URL would update to reflect each server.
Have I missed a setting or something? I searched on SDN but could not find a similar post.
Thanks a lot for your help.
Regards,
Dave.Hi,
check whether the service is active in transaction SICF
(it may become inactive, when there is patch applied, upgrade , etc)
then you will get one screen there then what you need to do is
without entering anything just click execute and expand the tree to
default_hots->sap->bc->bsp->sap-> under this node you should be able to see your BSP name . right click on it and click activate.
here The BSP Name is nothing but the BSP Application name. When you create a BSP applicaiton, a SICF service is created along with the BSP application. All the request that the user makes to this BSP application is processed by the service only with the help of this corresponding SICF service.
regards
Bhavana
Maybe you are looking for
-
Iphone 4 bluetooth connection with car
My iphone4 (iOS 4.2.8) pairs with my 2008 toyota Sienna bluetooth; however, it continues to fail and drops connection after a day. It shows it is paired, but I have to continue to re-pair it to actually get it to work. My ev3 LG phone worked great,
-
Why are my placed images in Illustrator dimmed?
I just got a fresh install of Illustrator CC and every time I place a raster image into my document, it appears dim or very light. When I go to export the image, the PNG file displays the image correctly.
-
Is Apple's Color Compatible With My Computer?
I have a G5 . . . however, it's an older Dual 2G G5 with PCI-33 slots . . . These slots will not allow me to work w/HD material because they're not compatible w/any HD cards, etc . . . I have FCS, but am thinking about upping to FCS2 - particularly t
-
Samsung Netbook / Intel® Atom™ Processor / 10.1" Display / 1GB Memory - Black Model: N145-JP02 | SKU: 1944065 This netbook features wireless networking for connecting to the Internet without wires and a 4-in-1 media reader for storing or transferring
-
i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them