Urgent - enabling the collaboration link in tool area

hi
I had followed the following link for displaying Collaboration link in the Tool Area in portal.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ee2c740aed4fcfe10000000a422035/frameset.htm
Also i had assign full control permission to the users.
But still i m not able to see the link .
Can any one tell what should be done...
Thanks
shashank
Message was edited by: shashank moharana

Hi Shashank,
See the link below:
http://help.sap.com/saphelp_ep60sp2patch5/helpdata/en/dc/935f3e1e7d7937e10000000a114084/frameset.htm
Here go to Collaboration->Administration Guide-> Basic Configuration-> Configuring the masthead for collaboration.
The above configuration has to be done to launch the CLP.
Hope this helps.
Regards,
Pooja.

Similar Messages

Translate Hoover Collaboration Link in Tool Area

Hello,
Does anyone know how to change the translation of the hoover description of the collaboration link in the Tool Area? I already tried by translating the Tool Area iView, but it doesn't contain the label 'Start the collaboration launch pad.
Looking forward to your reply.
Kind regards,
Joost Christenhusz

Hi Shashank,
See the link below:
http://help.sap.com/saphelp_ep60sp2patch5/helpdata/en/dc/935f3e1e7d7937e10000000a114084/frameset.htm
Here go to Collaboration->Administration Guide-> Basic Configuration-> Configuring the masthead for collaboration.
The above configuration has to be done to launch the CLP.
Hope this helps.
Regards,
Pooja.

Enabling Links in Tool Area

Hi,
I gone thro a PDF in
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000073623&_SCENARIO=01100035870000000202..
This PDF is for configuring links in tool area.
For configuring links, I have to set 2 properties:
(1) Enable Link1 & (2) Enable Link2
But I could not find these two properties. Navigate thro
Content administration -> portal content -> portal users -> standard portal users -> Default Framework Page -> Tool Area iView -> click Open
In the properties list, I didnt find Enable Link1 and Enable Link2 Options.
What could be the problem?
Kindly provide me a solution.
Thanks & Regards,
Dhana

Hi Laksmi,
You can directly enable those two links in the default framework page. see the below path:
Content Administrator --> portal content --> Portal Users > Standard Portal Users> Default Framework pages .
Now select the toolarea iView and its properties , there you can find those two links i.e Enable Link1 & Enable Link2. Make them as "True". and refresh the portal .
If it is helpful , Reward Points.
Cheers
Venkat

Enable a link in tool area

Hello all,
I'm trying to put a link on tool area iView. I know that tool area has a property EnableLink1.
I've tried to filled EnableLink1 with PCD address but it's not working.
Does anybody knows how to put an external on tool area iView?
Thanks,
Andre
My landscape:
- EP6 SP11
- CM and KM SP11
- WebAS 6.40 SP11
- Oracle 9.0.5 database
- Everything installed on a Windows 2003 Server with all patches

Hi Pradeep,
Have you read my following weblog.
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
the above is one alternative. You could also write a JDBC application that stores alert and then display alert when it finds it in the database. If you send an email at psingh(at)ust.net, i could send you see this example.
Regards,
Prakash

Change the collaboration link position

Hi all,
Whenever i activate colaboration,the link for collaboration appears jst at the side of the search textfield in the portals.I want collaboration link to be placed somewhere else on the portal page,may be on the content area where i view the IViews.Is it possible to show the link in the Iview rather than it appearing with the search Field.Please guide me.ASAP.Awaiting ..

Hi Preeti:
Not a standard way of doing this, but there is a workaround for it to solve your problem:
One way: you can have this link in Portal Favorites by doing the below:
Portal Favorites Menu > Organize Entries > Add an External Link >
Target: http://<hostname>:<port>/irj/servlet/prt/portal/prtroot/com.sap.netweaver.coll.shared.ui.CollaborationLaunchPad
Name: CLP (your choice)
Other way: create an URL iview with the same URL given in Target, and you can use see it in Content Area of your portal.
And you can disable the Collaboration from Search (Tool) iView.
Thanks,
MS
Edited by: Munna Sap on Jun 5, 2009 3:41 PM

The Xilinx 14.7 tools are not installed

Hi all
Not new to LV, but new to LV plus FPGA. Trying to compile a design I inherited from another worksite. The Compile Worker complains that "The Xilinx 14.7 tools are not installed." But they are installed - I even did a quick build of another design in ISE to make sure it still works.
FWIW, I'm using eval versions of everything while waiting for the PO to get processed. I installed 2013Xilinx14, so I wonder if Compile Worker is looking in the wrong place for the compiler (it quits just after creating the VHDL code).
OS is Windows 7
LV version is 2014 14.0f1
Targeting a sbRIO-9636, which is not installed on this PC
Thoughts, anyone?
Cheers!
MADman
Solved!
Go to Solution.

sdmadman wrote:I installed 2013Xilinx14, so I wonder if Compile Worker is looking in the wrong place for the compiler (it quits just after creating the VHDL code).
You need to install the LabVIEW 2014 Xilinx Tools. 2013 comes with Xilinx 14.4.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

[svn:fx-trunk] 15789: * Package and class level javadoc for the flex2. linker, flex2.tools,

Revision: 15789
Revision: 15789
Author:   [email protected]
Date:     2010-04-28 09:43:59 -0700 (Wed, 28 Apr 2010)
Log Message:
Package and class level javadoc for the flex2.linker, flex2.tools,
flex2.tools.flexbuilder, flex2.tools.oem, flex2.tools.oem.internal
packages.
QE notes:
Doc notes:
Bugs:
Reviewer: Corey (post commit)
Tests run: checkintests
Is noteworthy for integration: NO
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/CULinkable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/ConsoleApplication.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/FlexMovie.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/Linkable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/LinkerAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/LinkerConfiguration.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/LinkerException.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/PostLink.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/SimpleMovie.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Optimizer.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/flexbuilder/BuilderApplication.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/flexbuilder/BuilderConfiguration.jav a
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/flexbuilder/BuilderLibrary.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/ApplicationInfo.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Component.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/LibraryInfo.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/PathResolver.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Script.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Toolkit.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/ApplicationCompiler.jav a
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/ApplicationCompilerConf iguration.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/ApplicationData.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/BuilderLogger.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/ConfigurationConstants. java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/EmbedUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/GenericMessage.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/LibraryCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/LibraryCompilerConfigur ation.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/LibraryData.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/LinkerConfiguration.jav a
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMConfiguration.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMConsole.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMLogAdapter.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMPathResolver.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMProgressMeter.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMUtil.java
Added Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/package.html
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/flexbuilder/package.html
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/package.html

Collaboration Room Link on Tool Area Bar. Possible?

Hi All,
we have collabration rooms which dispays under My rooms for a particular user.Now a user wants to access a single room from somewhere Tool Area iview so that he need not have to navigate to next page for My room iview and then access.
We can do that by changing the URL link of help option with room URL,so that he can click on Help on Tool Area and acees it.But how can i change the name from HELP to some other.I think its not possible?please Confirm.
Is there any possibility to add one more link same as HELP
somewhere on Tool Area and give Room URl to access the room.
Or anyother good option.
Thanks in Advance

Hi Rani,
to 1:
You wanted to know how to change the name "HELP" in the toolarea iView, because as you correctly said, to change the link you only need to change an iView parameter. So only for the label "Help" you need to touch the PAR file. But actually I was misguided by your text, cause the Help link is in the masthead iView and not in the tool area, so you need to change the text in the localization files headeriView_nls(_XX).properties located in com.sap.portal.navigation.masthead.par
to2: For achieving that the links are only visible for some specific users you need to implement some additional logic in the ToolAreaiView.jsp
Hope that answers your doubts and your question,
Robert

Adding URL Links to Tool Area iView in Default Framework Page

We want to add a URL link to the Tool Area iView in Standard Framework page. When we edit the property "EnableLink1" and "EnableLink2" property to "True" of Tool Area iView, it shows two links in the tools area without actual links.
Where do we add these links?
Thanks.
PK

Hi,
In EP 7.0 SP21 no show the EnabledLink1 and EnabledLink2,
Was deprecated?.
Must to edit the par file to insert it?.
Thanks

How can I enable the Options menu in Tools?

Firefox Version 12, I click on tools and the option function is not there?
I am trying to get to digital certificate so that I can back it up.....

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*Press the F10 key or tap the Alt key to bring up the hidden "Menu Bar" temporarily.

How to enable Collaboration link

hi,
Can any one tell me how to enable Collaboration link in tool area.
thanks
swati

Hi,
Goto Content Administration -> Portal Content -> Portal Users -> Standard Portal Users -> Default Framework Page.
Check Tool Area and click Properties. Set Enable Collaboration Launch Pad to Yes.
Best Regards,
Avishai Zamir

To Hide "Collaboration" option-link in Tool Areal level

Hi,
I want to Hide only the "Collaboration" option-link in Tool Area level,expect "search" and "advanced search" option.
can any one tell me the way of approach for hiding the "Collaboration" Option link in the Tool Area Level with out hiding the "search and advanced search option".
Thanks in advance.
Regards,
Ravi

Hi Ravi,
Go to Content administration -> Portal content.
Under Browse tab, click Portal content -> End user content ->open Default framework page.
Check toolarea iview and open its properties 'Enable Collaboration Launch Pad' and set it to NO.Also go to cache validity period property and set all the hour, min, sec values to 0(zero). Refresh the portal and you will see the collaboration disappeared. After it hides enter the same value in cache validity period as before.
Regards,
Ganesh N

Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

Hi,
I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
on this service won't be able to start
Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
Hopefully someone out there has had the same issue and can assist.
Pete

Hi Pete,
For the first error message, please try the following steps:
Make sure the Information Store service is in Starting status,
Automatic startup type and works well, as a test we can try to
restart the Infroamtion Store service and verify the service works well.
Start
Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
location is accessible;
Start
Registry Editor, and locate the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
Use the
Permission option under the Security tab to check the permission setting on this key. Make sure
System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
it has Full Control permissions. Please refer to this article:
Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
Link:
http://support.microsoft.com/kb/285116
Start
ADSI Edit, and then browse to the following location:
Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
Right-click the
server name, and then click Properties.
Click the
Security tab, make sure this own server’s server object have
full control permission on its own server.
If not or the object is missing, please modify the permission or click
Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
Click OK, and then close ADSI Edit.
Use
Active Directory Users and Computers to add the current affected
Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
http://support.microsoft.com/kb/297295.
Restart the Exchange Server computer, then rerun the ExBPA.
For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
this message, it will not affect the Exchange servers.
Regards, Eric Zou

Enabling of collaboration launch pad

Hi All,
I have recently installed portal and knowledge management
I need to enable the collaboration launch pad and also the search box in the Tools Area of the portal inorder to search data repositories
Can anyone tell me the procedure how to enable these two things in the portal
Thanks in advance

Hi rev,
To enable Collaboration Launch Pad you have to
1Select the Tool Area iView checkbox.
2.Choose Open. The Property Editor page displays.
3.Choose Show All in the Property Category drop list menu.
4.Choose Enable Collaboration Lauch Pad properties.
5.Select Yes radio button.
6.Choose Save
7.Choose Close.
8.Choose F5 to refresh your portal screen.
To activate the RTC Session Manager, perform the following steps:
1Go to the default framework page.
Enterprise Portal     Portal Content u00AE Portal Users u00AE Standard Portal Users u00AE Default Framework Page.
2Double-click Default Framework Page.
3Select the Tool Area iView checkbox and choose Open.
4Choose Show All in the Property Editor drop list menu.
5Expand the Enable Real-Time Collaboration properties.
6Select Yes radio button.
7Choose Save.
8Choose Close.
9Choose F5 to refresh your portal screen.
To Enable searching you have to install Trex. Below are the steps to register Trex with portal.
To register TREX hosts with the Portal, you have to first locate the name server and port of the TREX Installation. This is located in sapmsg.ini. You have to then set up the TREX name server in the J2EE Engine with the Visual Administrator.
Procedure
To locate the name server and port
1.     Log on to the server with Administrator privileges.
2.     Navigate to the installation folder of TREX (that is C:\usr\sap\trex_00\).
3.     Double-click sapprofile.ini to open the file in Notepad.
4.     Make a note of the port number. The default is 30001. You will need to enter this port number to the J2EE Visual Administrator in a later step.
To set up the TREX name server in the J2EE Engine
1.     Open Windows Explorer in the server.
2.     Navigate to J2EE Admin installation directory (that is C:\usr\sap\[SID]\JC##\j2ee\admin).
3.     Double-click go.bat to start the J2EE Visual Administrator.
4.     Log on to the Visual Administrator.
5.     Choose Global Configuration  Services  TREX Service.
6.     Select the nameserver.address properties field.
7.     Enter the server name of the TREX instance and the port number.
8.     Choose Update.
9.     Choose the Save button.
10.     Select Yes to restart the TREX Service.
11.     To exit the J2EE Visual Administrator, choose Close  Exit.
Check the connection to the Enterprise Portal
1.     Log on to the Enterprise Portal with super-administrator permissions.
2.     Choose System Administration  Monitoring  Knowledge Management  TREX Monitor  Server Status.
You should see the status of the HTTP Server, Name Server, Queue Server, and Index Server is Available.
Regards
Parth
**Points will be welcomed**

Adding interactive buttons in Acrobat X Standard disables the Commenting and markup tools

Why does adding interactive buttons to PDFs in Acrobat X Standard disable the Commenting and markup tools in the PDFs, but only when they are viewed in the Reader, not when opened in Acrobat? When the buttons are removed, the Commenting and markup tools are re-enabled in Reader.
Thank you.

Which version of Reader are you testing with?

Urgent - enabling the collaboration link in tool area

Similar Messages

Maybe you are looking for