Urgent Entries for application 11 still exist in the extraction queue

Hi All,
In LBWE when i am trying to mainting structure its not allowing to add fields to ExtractStrucutre.
Following is the error iam getting.
Entries for application 11 still exist in the extraction queue ->
I have set the Update to inactive and trying to add fields to Extract strucutre .
Morover,
I have already deleted setuptable entries for this application Component 11 and i checked in rsa3, no records are there.
Regards,
C.V.
Message was edited by: P.C.V.

PCV,
Here are the steps. Make sure you do them when there is no posting going on.
1) Using transaction SA38, execute program RMBWV311. This will send the data from the extraction queue to delta queue for application 11.
2) Run your 2lis_11_***** info packages to bring the delta records into BW. Make sure to run these info packages twice because the delta is cleared on R/3 only if you run them twice. It is designed this way to accomodate the delta repetition functionality.
Just to make sure, verify that you don't see any data in RSA7, LBWQ and if you use RSA3, the system should not extract any data.
You should be able to change the extract structure now.
Abdul

Similar Messages

ERROR : Entries for application 13 still exist in the extraction queue -

Hi everybody,
While modifying extractor (LO Cokpit) I am getting this error.. I have deleted data through t.code LBWQ & LBWG still I am getting this ERROR,
" Entries for application 13 still exist in the extraction queue -> "
and it is givig the Diagnosis as below
Diagnosis
You are not allowed to change the extract structure MC13VD0ITM forapplication 13. This is because unprocessed entries are still presentin an extraction queue of application 13 for at least one client.
If an extraction structure is changed for which there are still openentries in an extraction queue, these entries can no longer be read andthe collective update terminates.
Please help me out..it is urgent...
Thanks in advance

Hi Sunita,
Do one things, to fix this problem, go to the BW for that info package, it seems
its already exists..if yes..delete the initialization request from the package
and come back to R/3 try to delete the application 13 and it will allow to make
the changes to the struc.
Hope it helps..
Need further help revert..
Assign points if useful..
Cheers,
Pattan.

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the "saved" ones before I write the new one. What to do to finally/definitely delete the save

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the “saved” ones before I write the new one. What to do to finally/definitely delete the save message?

sorry it's ios6

Files still exist after the copying is disrupted

I have a problem when the large file copy from the laptop to the external USB HDD or NAS (via CIFS share). When the copy is disrupted (either the network is down or the power outrage to my external HDD), the file still exist in the folder but cannot be
read or open. The corrupted file is still showing full size of the file. How can I avoid this?

Hi,
If you copy large files from the laptop to the external USB HDD or NAS, when the copy is disrupted, the files could be corrupted and we unable to read the file's contents. In general, your need to delete the file and copy the file again.
In additional, you could try to use diskpart to repair the disk to recover the files.
DiskPart Commands
http://technet.microsoft.com/en-us/library/cc770877%28v=ws.10%29.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am currently running OS 10.6.8 on my iMac and plan to upgrade to OS Mountain Lion. Will MS Office 2008 for Mac still run on the new OS?

I am currently running OS 10.6.8 on my iMac and plan to upgrade to OS Mountain Lion. Will MS Office 2008 for Mac still run on the new OS?

Check compatibility for all your software
http://roaringapps.com/apps:table

Mail: no entry for mailbox id 2 in the cache; this should never happen

My system log is full of thousands of errors from Mail:
3/20/15 5:26:50.009 PM Mail[7303]: no entry for mailbox id 2 in the cache; this should never happen
It appears to generate a few hundred of these entries every time I launch Mail, check for new mail, or click on any of my mailboxes in Mail. There's a noticeable power drain and hit to responsiveness when this occurs.
What I've tried so far:
Restarting Mail
Mailbox > Rebuild
Editing Accounts.plist to remove the mailbox with id 2
Deleting cache.db
Deleting all accounts from Mail and recreating one at a time
Deleting com.apple.mail from Containers
I have no third-party add-ons installed. My mail accounts are IMAP (Gmail and a personal domain account). I'm on a 13" MBP Retina, Yosemite 10.10.2, Mail version 8.2 (2070.6).
Does anyone have an idea as to what's causing this error spam?

Is Mail working properly? If so, ignore the Console messages.

How do I clear out multiple entries for a persons name in the Faces selection?

Can I get some help clearing up multiple entries in the "Click to Name" dialog box in iPhone 9.6?
Here's the behavior I'm seeing:
When I try to assign a name to a Face by clicking the "Click to Name" option, I start typing in my son's name and iPhone is showing me 15 entries for his name.
Of the 15 options, only 1 of them shows a mini-thumbnail photo of him, and a different one suggests that it's from the Contacts app, but the rest of them are blank.
This behavior is not happening for any of the other Faces in the library.
In terms of troubleshooting, I've opened Apple Contacts and ensured there is only 1 contact record for him (there are 2 email address listed). I've selected Library > Faces > And I see one polaroid image in the list for my son. In the past if there were multiple listings here I've seen similar results. I'm not sure what else to try.
What causes these to be duplicated?

I spoke with Apple Support today and they provided a workaround:
I had 7 entries for a person.
Find untagged photo with person in it. Select Entry 1
Find untagged photo with person in it. Select Entry 2
Repeat until you have at least 1 photo tagged with each of the 7 entries
Now go back to Faces and you'll see 7 polaroids listed.
Select each of them and merge them.
Problem solved.

I import photos into lightroom and they appear just fine and then after 'developing' some disappear from the library though they still exist in the previous import window

I import photos into lightroom and they appear just fine and then after 'developing' some disappear from the library though they still exist in the previous import window

Running MacOS 10.9.4 16 Gb RAM Lightroom v5.2

No entry for mailbox id X in the cache; this should never happen

I'm getting a lot of this in my logs... Any ideas how to fix it?
Feb 2 12:48:05 ssh-4 Mail[282]: no entry for mailbox id 36 in the cache; this should never happen
Feb 2 12:48:05: --- last message repeated 9 times ---
Feb 2 12:48:05 ssh-4 Mail[282]: no entry for mailbox id 51 in the cache; this should never happen
Feb 2 12:48:05: --- last message repeated 1 time ---
Feb 2 12:48:05 ssh-4 Mail[282]: no entry for mailbox id 28 in the cache; this should never happen
Feb 2 12:48:05: --- last message repeated 7 times ---
Feb 2 12:48:05 ssh-4 Mail[282]: no entry for mailbox id 22 in the cache; this should never happen
Feb 2 12:48:05: --- last message repeated 2 times ---
Feb 2 12:48:05 ssh-4 Mail[282]: no entry for mailbox id 28 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 50 times ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 52 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 1 time ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 33 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 1 time ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 40 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 3 times ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 46 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 5 times ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 33 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 2 times ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 28 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 2 times ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 33 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 2 times ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 28 in the cache; this should never happen
Feb 2 12:48:06: --- last message repeated 6 times ---
Feb 2 12:48:06 ssh-4 Mail[282]: no entry for mailbox id 33 in the cache; this should never happen
Feb 2 12:48:07: --- last message repeated 3 times ---
Feb 2 12:48:07 ssh-4 Mail[282]: no entry for mailbox id 28 in the cache; this should never happen
Feb 2 12:48:07: --- last message repeated 2 times ---
Feb 2 12:48:07 ssh-4 Mail[282]: no entry for mailbox id 47 in the cache; this should never happen
Feb 2 12:48:12: --- last message repeated 2 times ---
Feb 2 12:48:12 ssh-4 Mail[282]: no entry for mailbox id 26 in the cache; this should never happen
Feb 2 12:48:15: --- last message repeated 5 times ---
Feb 2 12:48:15 ssh-4 Mail[282]: no entry for mailbox id 32 in the cache; this should never happen
Feb 2 12:48:15 ssh-4 Mail[282]: no entry for mailbox id 33 in the cache; this should never happen
Feb 2 12:48:15 ssh-4 Mail[282]: no entry for mailbox id 32 in the cache; this should never happen
Feb 2 12:48:15 ssh-4 Mail[282]: no entry for mailbox id 33 in the cache; this should never happen
Feb 2 12:48:15 ssh-4 Mail[282]: no entry for mailbox id 32 in the cache; this should never happen
Feb 2 12:48:16 ssh-4 Mail[282]: no entry for mailbox id 28 in the cache; this should never happen
Feb 2 12:48:46: --- last message repeated 2 times ---

I have determined exactly what this is.
In the folder:
/Library/Mail/AccountTypes/com.apple.builtin.mailaccounts/
There is a list of different mail account types in a file called "MailAccounts.plist". When the Console gives you an error message, it will specifically state ..."mailbox id ## in the cache", which corresponds to an entry in this file.
This plist file must be modified. I have not tried flat out deleting the file, but if you can get the developer tools, you can easily delete the offending entries.
To delete the bad entries:
NOTE: If you have to delete multiple entries, delete the ones with the largest index (i.e. "id 999999") FIRST.
1. Open MailAccounts.plist in the Property List Editor
2. Under the root triangle, click the "Multiple" triangle (this shows you the actual entries)
3. Starting with the highest mailbox number, delete each entry "Item #" by highlighting the node and pressing the "Delete Item" button on the toolbar.
4. Repeat until all your console errors are accounted for.
5. Save the file: File >> Save
You can exit the Property List Editor. Open Mail and wait a few seconds, then check the console for error messages. If there are no more error messages, you're set! Otherwise go back and try deleting the offending item(s) again.
Time Machine is your friend if you don't get it right the first time.
HTH

Urgent!! - Adobe CC crashes during the "extracting " process for Photoshop, need to install the full version of , without passing trough CC

I need urgent support because Adobe CC crashes after the "extracting " process of an app. So if i choose to download an application ( Muse, Photoshop etc ) it downloads, and after that it crashes, is there any support available ?
Thanks,

Problem solved, it is the firewall who blocked the installation, everything works fine now!

Error Message: 'Distribution list still exists in the trash'

HI All
Please help us to provide the necessary solution as per the below query.
1. Which SAP transaction or program can I run to find information on when & what Distribution Lists have been deleted and by whom?
2. we are trying to recreate the same distribution list again by using transaction code S023, we are unable to create the same distribution, we are getting the below error message.
Error Message: 'Distribution list still exists in the trash'
Regards

SAp inbox

Messages still stuck in the Inbound queue SMQ2

Hello XI Gurus,
All my messages with "READY" status are still stuck in the inbound queue (smq2) for the last 2 hours...there was no SYSFAIL error messages or scheduled background running. I have to manually go in and executed each of those messages, instead of automatically process it. Could someone please tell me how to troubleshoot this?
Thanks so much in advanced,
Dng

Implement SAP note 758677 for this. This exactly deals with your issue.
This Basically speaks about scheduling 'RSQIWKEX' for inbound and 'RSQOWKEX' for outbound queues.
Also, you need to set the parameter 'QRFC_Restart_ALLOWED' to '1' in the transaction 'SXMB_ADM' -> Integration engine. Its in the runtime dropdown menu.
Note : without this parameter being set this will not work.
Thanks,
Karthik
Edited by: Karthik Rangaraju on Oct 1, 2008 2:13 PM

"No enought room on startup disk for Application Memory" when using the Accelerate Framework

Dear colleagues,
I am running what I know is a large problem for a scientific application (tochnog) a finite element solver that runs from the Terminal. The application tries to solve 1,320,000 simultaneous linear equations. The problem starts when I use the Accelerate Framework as the Virtual Memory size jumps from 142 G to about 576 G after the library (LAPACK) is called to solve the system.It does not do it if I use a solver that does not calls LAPACK inside Accelerate.
The machine is a mac pro desktop with 8 GB of ram, the 2.66 GHz Quad-core Intel and the standard 640 GB hard drive. The system tells me that I have 487 GB available on hard drive.
The top instruction in Terminal reads VM 129G vsize when starting. When I run the finite element application once the LAPACK library in the Accelerate framework gets called, the Virtual Memory (VM) jumps to 563 G vsize.
After a short while, I get the "No enought room on startup disk for Application Memory error"
This is a screen capture of the application attempting to solve the problem using the LAPACK library inside the Accelerate framework: Here are the numbers as reported by the activity Monitor.
Tochnog Real Memory 6.68 GB
System Memory Free: 33.8 MB, Wired 378.8 MB, Active 5.06 GB, Inactive 2.53 GB, Used 7.96 GB.
VM size 567.52 GB, Page ins 270.8 MB, Page outs 108.2 MB, Swap used 505 MB
This is a screen copy of the same application solving the same problemwithout using the Accelerate framework.
Tochnog Real Memory 1.96 GB,
System Memory Free: 4.52 MB, Wired 382.1 MB, Active 2.69 GB, Inactive 416.2 GB, Used 3.47 GB.
VM size 148.60 GB, Page ins 288.8 MB, Page outs 108.2 MB, Swap used 2.5 MB
I can not understand the disparity in the behavior for the same case. As I said before, the only difference is the use of Accelerate in the first case. Also, as you can see, I thought that 8 GB of ram memory was a lot.
Your help will be greatly appreciated
Best regards,
F Lorenzo

The OP had posted this question in the iMac Intel forum.
I replied along similar lines, but suggested he repost this in the SL forum where I know there are usually several people who have a far better grasp of these issues than I.
I would be interested in getting their take on this.
Although, I think you are coming to the correct conclusion that there are not enough resources available for this process, I'm not certain that what you are saying on the way to that conclusion is correct. My understanding of VM is that it is the total theoretical demand on memory a process might make. It is not necessarily the actual or real world demand being made.
As such, this process is not actually demanding 568GB (rounded.) As evidence of that, you can see there is still memory available, albeit quite small, in the form of free memory of 33.8MB and inactive of 2.53GB (the GB for that figure, above, seems like it might be a typo, since for the process when not using Accelerate the reported figure for inactive was 416.2 GB -- surely impossible) and 7.96GB used. The process, itself, is using 6.68GB real memory.
In addition, I question whether the OP has misstated the 487GB free drive space. I think that might be the total drive capacity, not the free space.
My guess is that it is the combination of low available memory and low free drive space prompting this error.
From Dr. Smoke on VM:
it is possible that swap files could grow to the point where all free space on your disk is consumed by them. This can happen if you are very low on both RAM and free disk space.
https://discussions.apple.com/message/2232469?messageID=2232469&#2232469
This gets more to the actual intent of your question...
EDIT: Looks like some kind of glitch right now getting to the Dr. Smoke post.
Message was edited by: WZZZ
<Hyperlink Edited by Host>

Do PlayFile and AddFile still exist in the iTunes COM interface?

I'm playing around with the iTunes COM SDK on Windows. I'd like to come up with a script that causes iTunes to play a video file, and either the PlayFile (associated with the liTunes interface) or AddFile (IITUserPlaylist) methods ought to do the trick -- at least in theory.
Unfortunately, neither of them work. They're both still apparently valid method calls, since my Java -> COM bridge barfs when I feed it invalid method names. But neither of them actually does anything. By way of contrast, OpenURL and AddURL both work perfectly -- and they'd be viable workarounds, save that they both assume the input file is streaming audio and store it in the library as such.
Have these methods been deprecated? If so, what have they been replaced with? Or is it more likely that I'm running afoul of one gotcha or another?
Right now, the only workaround I can think of is to write code that edits "iTunes Music Library.xml" directly, and I'd rather avoid that for what should be bloody obvious reasons.
Thanks in advance for any insight anyone has to offer on this.

In general:
- The best way to check if files are in a library is to drag the whole media folder to the library. If something was missed it will be added. If it is in the library is won't be added a second time.
- If you have a second copy of a file and iTunes does not currently list that specific file in its database then even if it is identical to one already in the database it will add it a second time. So if you have file xyz on the internal drive and the external drive and add them to iTunes you will end up with two entries for the same thing in iTunes because you really do have to copies of the files. While this can happen with two copies on a single drive, it will almost definitely be the case when you have a copy of a file on two drives because iTunes really sees them as two different things.
-Unless you know how iTunes works, avoid moving files yourself. Let the consolidate feature do all the file moving. Manually moving files can really mess up iTunes unless you know what you are doing and have iTunes set to not try to do it itself.
- There's no clean and easy way to delete duplicates. The best thing is to change practice so you don't create them. Here are references:
How to find and remove duplicate items in your iTunes library - http://support.apple.com/kb/HT2905
http://dougscripts.com/itunes/itinfo/dupin.php (commercial)
Posts by turingtest2 about different types of duplicates and techniques- https://discussions.apple.com/thread/3555601 and https://discussions.apple.com/message/16042406 (Note: The DeDuper script is for Windows)
http://www.hardcoded.net/dupeguru_me/

Application fault for Sync Send holds up the ccBPM queues

Hello Experts,
I have the following scenario which I have realized using a ccBPM in SAP PI 7.31.
I receive a nomination idoc from ECC from which I create a nomination request to be sent in Sync manner to a web service. The response received from the web service is sent through another idoc, back to ECC. In case of any failure during this, an ALEAUD idoc is sent back to ECC to convey the failure. This web service returns an application fault in case any data in the request is improper and there is no fault message in the WSDL for the web service.
I have used a ccBPM to receive the nomination idoc from ECC, transform it to web service request and send it using a Sync Send step. In case an application fault occurs, the SOAP receiver channel shows the error as application fault and my Sync Send step does not receive the expected response. However, a SOAP message with envelope is received from the web service which leads to the BPM queue land in error 'Permanent error in BPE inbound processing'.
However, in case of the application fault I want to make the Sync Send step trigger an exception so that the ALEAUD idoc is sent back to ECC system.
Any thoughts on how i can achieve this?
Thanks in adv.
Diptee

Hello Experts,
I have the following scenario which I have realized using a ccBPM in SAP PI 7.31.
I receive a nomination idoc from ECC from which I create a nomination request to be sent in Sync manner to a web service. The response received from the web service is sent through another idoc, back to ECC. In case of any failure during this, an ALEAUD idoc is sent back to ECC to convey the failure. This web service returns an application fault in case any data in the request is improper and there is no fault message in the WSDL for the web service.
I have used a ccBPM to receive the nomination idoc from ECC, transform it to web service request and send it using a Sync Send step. In case an application fault occurs, the SOAP receiver channel shows the error as application fault and my Sync Send step does not receive the expected response. However, a SOAP message with envelope is received from the web service which leads to the BPM queue land in error 'Permanent error in BPE inbound processing'.
However, in case of the application fault I want to make the Sync Send step trigger an exception so that the ALEAUD idoc is sent back to ECC system.
Any thoughts on how i can achieve this?
Thanks in adv.
Diptee

Urgent Entries for application 11 still exist in the extraction queue

Similar Messages

Maybe you are looking for