Urgent!! Error in interactive planning

Hi Gurus,
I am getting error in interactive planning "Invalid data Statues" for some material.
I am able to run forecast for all the materials other then 10 products.
Can anyone help me why this error is coming up?
I checked the data in cube , time series and CVC and everything looks good .
Please let me know
Thanks in advance
Regards,
Raj

Hi Gurus,
I tryed LC consistence check and Planning object consistency and even then i am getting same error "invaild data statues" for some materials.
Thanks and please let me know if you have any solution.
Thanks a Lot
Regards,
Raj

Similar Messages

Error while intercative planning in SNP

What we did is as below
1.     created MOPS
2.     created Planning area in DP
3.     created time series and assigned version 000 in DP
4.     Created Planning Book and Data view in DP
5.     BW settings to extract data from OLTP and we have the data with planning version 000 in BW info cube
6.     Load the history data from Info cube
7.     Calculated proportional factors for next year
8.     created Forecast profile.
9.     Run forecasting after reading the history
10.     Now forecast is ready in DP.
11.     Released the same to SNP
12.     When I goto SNP interactive planning and trying to load the data using 9SNP94 planning book/Data view i am getting the error - key figure not defined
Can anyone tell me how to resolve the same?

Dears,
I tried all the steps given by you..but all in vain, I will explain you in detail what i ahve done..
In /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network
I have defined MOPS with following character(no SNP tick)
9ALOCNO
9AMATNR
Defined planning area with following key figures
SALE_HIST     Sales history
9AREVFC     Sales Forecast
9AMANUP     Manual Correction
9ATOTFC     Total Forecast
9APRICEFC     Planned Price
T_PRICE     Price
Storage bucket profile used is MONTH
Created time series and it is valid up to 31.12.2009
In BW, I have created a infosource/infocube with 9ALOCNO and 9AMATNR as character and SALE_HIST     Sales history as key figure and OCALMONTH as time character. Uploaded data from excel and now I can see the data in infocube.
Now uploaded the data from BW to SAP-APO using - /SAPAPO/TSCUBE - Load Planning Area Version
Calculated proportional factor using /SAPAPO/MC8V - Calculate Proportional Factors.
In /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network, created chrematistics combination.
Created forecast profile with UA profile
Defined Planning book and data view
Defined macros in /SAPAPO/ADVM u2013 MacroBuilder
For calculating 9ATOTFC     Total Forecast = Sales Forecast 9AREVFC + Manual Correction 9AMANUP
For calculating T_PRICE = 9ATOTFC * 9APRICEFC
Now I goto /SAPAPO/SDP94 - Interactive Demand Planning and search for my PB
I could see sale history filed is copied form BW.
Run Forecast and got the forecast in 9AREVFC.
Released the DP figures above to SNP using /SAPAPO/MC90 - Release to Supply Network Planning.
In /SAPAPO/SNP94 - Interactive Supply Network Planning, used std planning book/DV u2013 SNP94(1).
When I load I am getting the error as u201Cno key figure selection was foundu201D
Any clue where i am wrong?

Error during Network Planning (SAPSQL_INVALID_FIELDNAME)

Hi,
During Interactive planning in SNP when releasing the forecast to network (thru transacction /sapapo/snp01) we are getting an runtime error "SAPSQL_INVALID_FIELDNAME"
Please help. Error analysis appearing in dump is mentioned below
An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
procedure "SELID_GET" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An Open SQL clause was specified dynamically. The contained field name
    "SEL_9AACTNAME" does not exist in any of the database tables from the FROM
     clause.

Hi Aparna,
Yes you are right. The forecast is already released to SNP and the team is now doing network planning. We are facing the error here.
Our technical person has done the analysis and it seems that its due to some Local objectcs that are implemented in system.
Will update once the issue is resolved.
Thanks

Map functionality in interactive planning using PC MILER instead of IGS

Dear Experts,
We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
The PC MILER is using the customized solution for calculating of the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
I have configured all the relevant settings that are required for using the MAP functionality in interactive planning. However the VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
Please advice if anyone came across similar integration issues, or have any insights on this issue?
Thank you,
Ramesh.

Dear Experts,
We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
The PC MILER is using the customized solution for calculating of the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
I have configured all the relevant settings that are required for using the MAP functionality in interactive planning. However the VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
Please advice if anyone came across similar integration issues, or have any insights on this issue?
Thank you,
Ramesh.

Interactive Planning area - No plannable

We just upgraded to SCM 5.0. We are getting errors when running the interactive planning area.
When we select a single products and try to load into our planning book, we are getting no plannable characteristic combination. When we select multiple products, the products load.
Any ideas on why it works for multiple and not one?

Here is what we completed to fix our problem.
Run report /SAPAPO/OM_LC_UPGRADE_50 via TCODE SE38. In section
C - At End of Upgrade, and perform steps 4 - 7.
If you run transaction /NRSRV; >All Elementary Tests; >>Database;
Double-click >>>Check Database Parameter(s)<<<
++EXECUTE++
You will find 2 red lights there.
ORACLE: Parameter OPTIMIZER_FEATURES_ENABLE is set to value 9.2.0
(recommended value is 10.x)
Message no. RSCV527
This is related to our problem, which is due to a big issue in Oracle
10.*. You might need to get your Oracle admin involved to change the
parameters.
ORACLE: Parameter OPTIMIZER_MODE is set to value CHOOSE(recommended
value is ALL_ROWS).
In most cases the /SAPAPO/DELETE_LC_ANCHORS report did not run for the
affected client during the last LiveCache initialization due to one of
the following configuration errors:
/SAPAPO/DELETE_LC_ANCHORS was not entered as post-processing step
for LiveCache initialization. In LC10 press the pencil button (and the
administration reports tab if necessary) to check this setting.
The RFC destination was not set up (correctly) for the affected
client during LiveCache initialization. See note 305634 for more details

Characteristic restricted DP interactive Planning

Hi !!!!!
When I try on my interactive planning, view my table for a object i have a mistake.
The message is :
- Superior characteristic 0DIVISION of characteristic ZBGPCUSSL has to be restricted
- Error reading data - Planning book cannot be processed further
Any know something about this?
Thanks

Are the infobjects ZBGPCUSSL and 0DIVISION compounded? In that case you need to add an additional navigation attribute ZBGPCUSSL_NAV (name it any way you like) to the infoobject ZBGPCUSSL. Then you need to activate it in your planning area. And you will also need to populate the navigation attribute during master data loading of infoobject ZBGPCUSSL.
Then you can use the new navigation attribute to do the selection.

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

Key Figure Display in Interactive Planning

Hello,
I am unable to display some of the key figures in SNP Interactive Planning. All these Key Figures are present in Planning book and are also included in the data view.
Is there any setting wherein I can control the display of Key figure although that key figure is present in Planning book and data view. For Example I have my "safety stock" key figure in my planning book and data view, but I am unable to see the "safety stock" key figure in SNP interactive planning.
Would really appreciate your help.
Thanks,
Sarath.

Hi Visu,
Your answer is really helpful, thanks for that. But while I am trying to hide some key figures it is not allowing me to do so. It is either hiding all the key figures or unhiding all. Please let me know if why the system is behaving like this.
Thanks

Error while creating planned order in product view

I am getting following error when I try to create planned order for a product in a Location manually in product view using /SAPAPO/RRP5.
Error occurred while creating order
Message no. /SAPAPO/RRP251
I checked the product and resource. Everything looks good.
Block is available in the resource WMP1_2041_001 for characteristics specified in planned order.
Product master and PDS look good.
In the planning log, I see the following error message.
Plan explosion failed for product LBRA1050-661 in location 2041
Message no. /SAPAPO/RRP718
I have not found SAP notes for above error.
Can you pl let me know what this is due to?
Thanks,
Srini

Srini,
The message was created as a result of several notes, such as 1582997. There are others.
The implication is that you have an invalid source somewhere in your BOM. Maybe a bad component part, maybe a bad transportation lane, maybe an invalid BOM, or maybe a bad PPM/PDS.
If you can't find the problem using logical troubleshooting steps, have one of your programmers debug. Have him put breakpoints in FM /SAPAPO/RRP_PLORD_CREATE . If you are particularly lucky, you will find a developer that understands German, because all the internal comments in this FM are in German.
Best regards,
DB49

Error while executing planning Function

Hi All,
I'm getting some error while executing planning function. Below are errors. Please check and provide solution.
Errors occurred when executing planning function RTFMPF01/RTFMPG01
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Value 10 of chara Region does not correspond to the attrib.val RM of chara Store
Value 11 of chara Region does not correspond to the attrib.val NA of chara Store
Thanks,
Vamsi

Hi,
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Looks like there is a characteristics relationship which derives the attribute store from Region.
Check the master data for Region for attribute Store and the corresponding values.
The values that are maintained in the master data will only be allowed to enter in the cube.
Thanks
pratyush

Error during EPMA planning app deployment

Hello Experts,
I am trying to deploy an EPMA Planning application through Workspace. EPM version is 11.1.2.3
Below is the error that is getting thrown while deployment (with selecting options - "Refresh Outline", "Create Security Filters" & "Full Deploy"):
Creating Security Filters...: Index: 1, Size: 1 An Exception occurred during Application deployment.: Index: 1, Size: 1
Any idea what should be exact meaning of this error/exception?
Regards,
Santy.

Hi Santy,
Does it deploy if you remove the Security filter option, what is the error message if you deploy just the security filters from within the planning app and not epma, if it is generates an error from the planning app there should then be some information in the planning and essbase logs.
Cheers
John
http://john-goodwin.blogspot.com/

Saving data in the Interactive Planning Data

Hi,
I want to save data in the interactive Planning and for some key figures it says that the data is saved successfully but the data is not saved when I returne to the Interactive Planning.
What can it be?
I have looked for possible causes, but I have not identify it
Thanks in advance

Hi ,
Are the key figures that you are trying to save data for "auxillary key figures" . If so they will retain their value only till your are in the interactive planning screen , once you back out and come in again you will not be able to see the values that you put earlier. Check that and update me
Thanks
Saradha

URGENT : Error: nca_connect_server: cannot communicate host ...on port....

URGENT : Error: nca_connect_server: cannot communicate host ...on port....
Platform :
front end - Forms6i
App Server - Oracle 9iAS
Testing tool - Mercurry Load Runner 8.0
Database - Oracle 9i
Hi Gurus,
I am trying to run a script in Load runner but its always coming out by following error message -
vuser_init.c(63): Warning: ifError expired (5) during NCA handshake,
vuser_init.c(63): Warning: ifError expired (5)
vuser_init.c(63): Error: nca_connect_server: cannot communicate with host 202.46.209.42 on port 7778
Abort was called from an action.
forms url which used in test script is running fine without any error with same port, I am wondering why it is returning error with Load Runner ?
Quick help on pinpointing the issue will be highly appreciated, Following is the Loadrunner script m using -
vuser_init()
     web_set_max_html_param_len("1024");
     web_url("f6isrvl",
          "URL=http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en",
          "Resource=0",
          "RecContentType=text/html",
          "Referer=",
          "Snapshot=t1.inf",
          "Mode=HTML",
          EXTRARES,
          "Url=../forms60java/f60web.jar", "Referer=", ENDITEM,
          "Url=../forms60java/FImageBean.jar", "Referer=", ENDITEM,
          "Url=../forms60java/images.jar", "Referer=", ENDITEM,
          LAST);
     web_url("Registry.dat",
          "URL=http://202.46.209.42:7778/forms60java/oracle/forms/registry/Registry.dat",
          "Resource=0",
          "RecContentType=text/plain",
          "Referer=",
          "Snapshot=t2.inf",
          "Mode=HTML",
          LAST);
     web_reg_save_param("NCAJServSessionId",
          "LB=",
          "RB=",
          "Search=Noresource",
          LAST);
     web_url("f6isrvl_2",
          "URL=http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en&acceptLanguage=en-us&ifcmd=startsession",
          "Resource=0",
          "RecContentType=text/plain",
          "Referer=",
          "Snapshot=t3.inf",
          "Mode=HTML",
          EXTRARES,
          "Url=f6ilsnr/?JServSessionIdf6i=i7yjfl33c1.f45nez95eiGIpR1vp2TD/knGnluImQXHcALJmQ5Go6XNr3CSa30R&ifcmd=getinfo&ifhost=MILDH0417&ifip=10.81.6.127", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceListener.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/OneDDataSource.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/ArrayOneDDataSource.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/AbstractOneDDataSource.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceAdapter.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceEvent.class", "Referer=", ENDITEM,
          LAST);
     nca_set_connect_opt(SCALE_INFO, 8, 20);
     nca_set_connect_opt(REQUIRED_LIST, 0);
     nca_connect_server("202.46.209.42", "7778", "module=ulgprc_em_100_01_c.fmx userid=dbk/dbk@dbkls05 ORA_USER=devjp10 USR_LANG=ENG");
     nca_set_window("Login");
     nca_edit_set("27", "SSC");
     nca_obj_type("27", '\t', 0);
     nca_edit_set("30", lr_decrypt("44b61ad9b8d2295c3768adc952f4"));
     nca_button_press("32");
     nca_message_box_press("Forms", 2);
     nca_menu_select_item("SSC", "Lending;Underwriting");
     nca_set_window(" (Underwriting)(Pending Request : 0)");
     nca_button_set("386", 1);
     nca_menu_select_item(" (Underwriting)(Pending Request : 0)", "Edit;Exit");
     nca_set_window("SSC");
     nca_menu_select_item("SSC", "File;Exit");
     return 0;
Execution Log
Virtual User Script started
Starting action vuser_init.
vuser_init.c(12): web_set_max_html_param_len was successful      [MsgId: MMSG-26392]
vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/f60web.jar" (specified by argument number 9)      [MsgId: MMSG-26577]
vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/FImageBean.jar" (specified by argument number 12)      [MsgId: MMSG-26577]
vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/images.jar" (specified by argument number 15)      [MsgId: MMSG-26577]
vuser_init.c(14): web_url("f6isrvl") was successful, 1882891 body bytes, 1386 header bytes, 12 chunking overhead bytes      [MsgId: MMSG-26385]
vuser_init.c(27): web_url("Registry.dat") was successful, 4117 body bytes, 367 header bytes      [MsgId: MMSG-26386]
vuser_init.c(36): Registering web_reg_save_param was successful      [MsgId: MMSG-26390]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/f6i/f6ilsnr/?JServSessionIdf6i=i7yjfl33c1.f45nez95eiGIpR1vp2TD/knGnluImQXHcALJmQ5Go6XNr3CSa30R&ifcmd=getinfo&ifhost=MILDH0417&ifip=10.81.6.127" (specified by argument number 9)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceListener.class" (specified by argument number 12)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSource.class" (specified by argument number 15)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/ArrayOneDDataSource.class" (specified by argument number 18)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/AbstractOneDDataSource.class" (specified by argument number 21)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceAdapter.class" (specified by argument number 24)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceEvent.class" (specified by argument number 27)      [MsgId: MMSG-26577]
vuser_init.c(42): Warning -26652: Response body length (96) does not match the Content-Length header specification (95) for "http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en&acceptLanguage=en-us&ifcmd=startsession"      [MsgId: MWAR-26652]
vuser_init.c(42): web_url("f6isrvl_2") highest severity level was "warning", 4459 body bytes, 3017 header bytes      [MsgId: MMSG-26388]
vuser_init.c(59): nca_set_connect_opt("SCALE_INFO")
vuser_init.c(61): nca_set_connect_opt("REQUIRED_LIST")
vuser_init.c(63): Warning: ifError expired (5) during NCA handshake,
vuser_init.c(63): Warning: ifError expired (5)
vuser_init.c(63): Error: nca_connect_server: cannot communicate with host 202.46.209.42 on port 7778
Abort was called from an action.
TIA,
Sheilesh

Well, the obvious question is what does 'mail.wbe-pli.com' translate to on the machine?
Does it translate to your public IP address, in which case your traffic has to go out through your router and come back in? In addition to not being ideal, that's also not supported by a number of different routers (they can't handle NAT traffic coming back in from the private network).
In most cases the solution is to setup internal DNS so that your hostname maps to the internal address of your server, not the external one.
In this case, though, you could also configure Mail.app to use 'localhost' for the mail server, rather than 'mail.wbe-pli.com'. That will enable it to talk to the server running on the local system.

Error while interacting with scanner acrobat 9.0 and windows 7 and user profile

After using Acrobat 9 for years I get a "Error while interacting with scanner". I have uninstalled and reinstalles the drivers for my Epson Expression 1600 scanner and still get the message. I did get it to work by changing to a differ window user account. Is there anyway correct the problem for the orginal user account.
Thank you

Using MSPaint works fine also,......................
As for the question as to whether the update broke I can't honestly remember, I know it worked finr with an old HP scanner I had but as to the version of Acrobat at that time I don;'t recall
Anyway getting fed up with this issue, I de-installed it, rebooted and re-installed.
Ver 9.0.0 says the scanner driver is not installed or connected
Ver 9.2.0 says the same.
Ver 9.3.4 says error while interacting while interacting with scanner.........
The scanner works with MSPaint, its own driver and application.
What is wrong with this Adobe Acrobat Pro 9?

Getting error : There is an error while getting plan id.

Hi,
While opening plan I am getting this error:
‘There is an error while getting plan id. No Free partitions available. Contact DBA to create partitions.’
Can anyone help me here?

Have a look at the following note, it could be relevant to the issue:
Note: 313642.1 - Create Aps Partitions Fails With Ora-2149 Ora-6512 Ora-14501
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=313642.1

Urgent!! Error in interactive planning

Similar Messages

Maybe you are looking for