Urgent :Error while Uploading images.
Hi all,
I got following error while uploading an image file(.gif) from local drive.
The file you are trying to install contains no images.
I did
Impor t> Import File Path , File type (Image Export)>Install > Install Image
I got above error.
Plz Help.
Vinaya.
Try going to:
Shared Components>Images>Create
This should allow you to upload your image!!
Note that if you leave the "application" option set to "No application associated", by default, you can reference it from any app in your workspace. Alternatively, you may limit the application that references the image by choosing the app in the drop down list.
Hope that makes sense
Duncan
Similar Messages
-
Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
NSMutableDictionary *properties = [NSMutableDictionary dictionary];
[properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
[properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
[self.session createDocumentFromInputStream:inputStream
mimeType:@"image/png"
properties:properties
inFolder:salesOrderRouteMapFolderId
bytesExpected:[imageData length]
completionBlock:^(NSString *objectId, NSError *error) {
NSLog(@"Object id is %@",objectId);
if(error == nil) {
[inputStream close];
NSLog(@"Uploading Sales order route map successfully.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
} else {
[inputStream close];
NSLog(@"Uploading sales order route map failed.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
} progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
properties:(CMISProperties *)properties
contentInputStream:(NSInputStream *)contentInputStream
contentMimeType:(NSString *)contentMimeType
bytesExpected:(unsigned long long)bytesExpected
cmisRequest:(CMISRequest*)request
completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
// Validate param
if (link == nil) {
CMISLogError(@"Must provide link to send atom entry");
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
return;
// generate start and end XML
CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
writer.cmisProperties = properties;
writer.mimeType = contentMimeType;
NSString *xmlStart = [writer xmlStartElement];
NSString *xmlContentStart = [writer xmlContentStartElement];
NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
NSString *xmlContentEnd = [writer xmlContentEndElement];
NSString *xmlProperties = [writer xmlPropertiesElements];
NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
// The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
// the fly to support very large files.
[self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
httpMethod:httpRequestMethod
session:self.bindingSession
inputStream:contentInputStream
headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
bytesExpected:bytesExpected
cmisRequest:request
startData:startData
endData:endData
useBase64Encoding:YES
completionBlock:^(CMISHttpResponse *response, NSError *error) {
if (error) {
CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
if (completionBlock) {
completionBlock(nil, error);
} else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
if (completionBlock) {
NSError *parseError = nil;
CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
[atomEntryParser parseAndReturnError:&parseError];
if (parseError == nil) {
completionBlock(atomEntryParser.objectData, nil);
} else {
CMISLogError(@"Error while parsing response: %@", [parseError description]);
completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
} else {
CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip -
Urgent: Error while uploading into pdf file
Hi ,
I got a requirement that converting smartform into pdf file and sending into application server, And uploading the that pdf file into presentation server once a day am geting error when uploading into pdf format from application server .
Error : There was an error while tryinging to parse an image.
Please help me out its urgent.
Thanks in advance
Regards
krishna
Edited by: krishna rao on Feb 13, 2008 12:05 PMU can use this code
Reward if useful
REPORT ZMN_PDF_UPLOAD.
data: begin of itab occurs 0,
field(256),
end of itab.
data: dsn(100) value '\usr\sap\DEV\DVEBMGS00\work\testpdf',
length like sy-tabix,
lengthn like sy-tabix.
call function 'GUI_UPLOAD'
exporting
filename = 'c:\temp\test.pdf'
filetype = 'BIN'
importing
filelength = length
tables
data_tab = itab.
open dataset dsn for output in binary mode.
loop at itab.
transfer itab-field to dsn.
endloop.
close dataset dsn.
clear itab.
refresh itab.
*To crosscheck if it went well
open dataset dsn for input in binary mode.
do.
read dataset dsn into itab-field.
if sy-subrc = 0.
append itab.
else.
exit.
endif.
enddo.
call function 'GUI_DOWNLOAD'
exporting
filename = 'c:\temp\testn.pdf'
filetype = 'BIN'
bin_filesize = length
importing
filelength = lengthn
tables
data_tab = itab.
*Or
*Use the TCode
*CG3Z or CG3Y
*for downloading to Application Server. -
Wordpress http error while uploading images with flash
Hi guys
I have a problem with my wordpress blog " bollywood wallpapers ". When I try to upload images with defualt wordpress flash uploader I get "http" error.
I am having this problem from last 5 months.Dear Siva,
that is indeed strange.
Still don't know if this could be an issue with your NWDS or the PAR itself.
So let's do 2 tests
===============================================
TEST NR. 1
Let's try and check the NWDS first by creating a custom PAR.
Don't worry, it's easy.
Just open your NWDS and go to the top menu
File > New > Project
Inside the popup window that will open please choose
Portal Application (on the left) and Create a Portal Application Project (on the right)
Then give any name you would like (no spaces or dots, etc...)
You now have a Portal project created on NWDS ( you will see a folder on the left side with your project name)
Click on that folder with your LEFT mouse button and choose EXPORT
Choose PAR File
Choose your Project
Choose a path where you want your PAR file to be saved. (uncheck the deploy PAR file, but check the include the source code).
And click Finish.
Now delete the project you have created (by clicking on the folder with your LEFT mouse button again, but chose DELETE project)
Now you're ready to re-import the PAR file.
===============================================
TEST NR. 2
Maybe your standard PAR file that you've downloaded doesn't have the source code included or is corrupted.
Please try to open it with a ZIP program and check what type of structure/files you have there.
Have you also checked your NWDS log ?
You could also share here that log, so that I can better help you.
Kindest Regards
/Ricardo -
Getting DYNPRO_SEND_IN_BACKGROUND this error while uploading image
hi have created a bsp program in local object and i m not getting error,but now i have crated this program in packege , so when ever i uploding image in page every time getting this error , please help me
The following error text was processed in the system:
*Sending of dynpro SAPLSTRD 0300 not possible: No window system type specified*
Exception Class *CX_SY_SEND_DYNPRO_NO_RECEIVER*
Error Name *DYNPRO_SEND_IN_BACKGROUND*
Program *SAPLSTRD *
Include *LSTRDU30 *
Line *186*
i m uploading image using code not manually and using htmlb:fileupload tab.
getting here at this point
*upload new file INTO MIME OBJECTS
o_mr_api->put(
EXPORTING
i_url = lv_url
i_content = lv_xstring
i_suppress_package_dialog = 'X'
i_new_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
cancelled = 3
permission_failure = 4
data_inconsistency = 5
new_loio_already_exists = 6
is_folder = 7
OTHERS = 8 ).
ThanksHi Prashant,
I worked on your code and found that the exception is thrown in the standard FM..
CALL FUNCTION 'SKWF_NMSPC_IO_FIND_BY_ADDRESS'
EXPORTING
url = l_url "parent url
appl = wbmr_c_skwf_appl_name
IMPORTING
io = g_parent_loio
error = l_error. "is also set, if l_url not found !
Reason:
I named my BSP application Z_MIMEUPLOAD I was getting dump when ....
In layout and in OnInputprocessing I used ZTEST_MIMEUPLOAD instaed of Z_MIMEUPLOAD
The dump disappered as soon as I corrected the BSP application name everywhere in the application.
Please check the url and application name everywhere in your code.
Also replace the code:
CONCATENATE 'http://siildev.siil.com:8001/sap(bD1lbiZjPTc3Nw==)/bc/bsp/sap/zprbsp_002/' wa_file into
By this:
CONCATENATE 'http://siildev.siil.com:8001/sap(bD1lbiZjPTc3Nw==)/bc/bsp/sap/zprbsp_002/PAGE_NAME' wa_file into
That is add page name to url in layout.
I am not sure what is hapening in your code but this is what I found.
Hope it helps you.
Regards,
Anubhav -
Error while uploading BITMAP image in SAP through SE78.
Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav. -
Error while uploading text file....
Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
ramaHalo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr20 like qmfe-/itml/usr20,
end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr21 like qmfe-/itml/usr21,
end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr19 like qmfe-/itml/usr19,
end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr07 like qmfe-/itml/usr07,
end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
gs2_qmfe like line of gt2_qmfe,
gs3_qmfe like line of gt3_qmfe,
gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
ls_lines2 type i,
ls_lines3 type i,
ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,
ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt' obligatory.
field-symbols: <fs1> like gs1_qmfe,
<fs2> like gs2_qmfe,
<fs3> like gs3_qmfe,
<fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*& Form upload_gt1_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM. " upload_gt1_qmfe
*& Form upload_gt2_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file2
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM. " upload_gt2_qmfe
*& Form upload_gt3_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file3
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM. " upload_gt3_qmfe
*& Form upload_gt4_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file4
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM. " upload_gt4_qmfe
*& Form update_qmfe
text
--> p1 text
<-- p2 text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set /itml/usr20 = <fs1>-/itml/usr20
where qmnum = <fs1>-qmnum
and fenum = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM. " update_qmfe -
Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API
Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you -
Error while getting image from database in SUP using ios?
Hi All,
Im developing native iOS application using sup 2.1.3 . Im getting error While retrieving image from SUP database. Here i'm trying to get image from database and show in imageView.can any one help me how to fix this issue?
In database image datatype is 'LONG Binary' .
My table Schema:
CREATE TABLE dba.ImagesTable (
RowID INT NOT NULL,
ImageName VARCHAR(20) NOT NULL,
PhotoData LONG BINARY NOT NULL,
IN SYSTEM
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA137 PRIMARY KEY CLUSTERED (RowID)
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA138 UNIQUE NONCLUSTERED (RowID)
in Xcode:
[SUP107SUP107DB synchronize];
SUP107ImagesTable *imgTable =[[SUP107ImagesTable alloc]init];
SUP107ImagesTableList *list =[SUP107ImagesTable findAll];
SUP107ImagesTable * oneRecord =[list objectAtIndex:0];
NSLog(@"rowId:%d---imageName:%@---photoData:%@---photoLenght:%d",oneRecord.rowID,oneRecord.imageName,oneRecord.photoData,oneRecord.photoDataLength);
NSData *tempData =[[NSData alloc]init];
SUPBigBinary *responseBinaryData = (SUPBigBinary *)oneRecord.photoData.value;
@try {
[responseBinaryData openForWrite:[oneRecord.photoData length]];
[responseBinaryData write:tempData];
@catch (NSException *exception) {
NSLog(@"exception: %@",[exception description]);
UIImageView *imgView =[[UIImageView alloc] initWithFrame:CGRectMake(50,50,100,100)];
[self.window addSubview:imgView];
UIImage * tempImage =[UIImage imageWithData:tempData];
imgView.image = tempImage;
[responseBinaryData close];
Error Log:
2014-04-02 18:42:15.150 SUP102[2873:70b] rowId:1---imageName:Apple---photoData:SUPBigBinary: column=c pending=1 allow_pending_state=1 table=sup107_1_0_imagestable mbo=0x0 key=(null) ---photoLenght:90656
Printing description of responseBinaryData:
<OS_dispatch_data: data[0xc891b40] = { leaf, size = 90656, buf = 0x1213a000 }>
2014-04-02 18:42:33.304 SUP102[2873:70b] -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] exception: -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.306 SUP102[2873:70b] [ERROR] [AppDelegate.m:497] NSInvalidArgumentException: -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40This thread talks about uploading image to SAP from a IOS device,Sending Image to SAP via iOS Native app (SUP 2.1.3)
Midhun VP -
Error while uploading Template
Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING Cp1252
Language Section* EN-US
Catalog Section Supplier* Title
FEDERAL INDUSTRIES Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PMHi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH -
Error while adding Image: ORA-00001: unique constraint
Dear all,
I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
BR
Roman
Edited by: Roman Becker on Jan 13, 2009 12:59 AMHi Ritam,
For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
For now I will close this thread as unanswered.
SAP SRM Moderators. -
Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
TarunHi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj. -
Error while uploading Transport request
Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
DeepakHi,
Check the versions of the two sap systems you are downloading and uploading the transport requests -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Getting error while uploading a document in a library
Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
RegardsHi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
It keeps telling me that on youtube that the video can't be played
it keeps telling me on youtube that the video cant be played. i just got my imac today and i dont know how to fix it.
-
WDS Deployment Error; Network Path Was Not Found
Hello, For a couple of years we have had a Windows Deployment server on Server 2008 called "WinDeploy". Recently, we created a new server on Server 2012 and I created a new WDS called "WDHQ". I did not want to have to create new task sequences and
-
I know one can import the iPhoto library into the Aperture projects pane. and have it as referenced images. If you then add an delete images via the iPhoto application, how do you update the iPhoto images seen in Aperture?
-
All kinds of problems... can't enter bios, etc
Hey all, hoping you can help. I only have one system at home which is now not working, so pardon me if I'm a little slight on details. I got a K8T Neo m/b with an athlon 64 3000 and 1gb of Kingston RAM. It was all acquired as a bundle from Mwave.co
-
Why can't I login to some websites since iOS 7 upgrade?
I can't login to a website from my iPad although the same login details work fine when logging in from my PC. This has started happening since the upgrade to iOS 7. Can anyone suggest why and what I can do to resolve this, please? Thanks for any advi