URGENT- Exporting jpg from LR with title and captions: how?
Hi,
I need to email some pix before midnight.
In LR metadata section I have info (title and caption). I did export pix as JPGs but can't find the info when I open the pictures now in a folder on my desktop.
How can I make sure the info is attached to the photo? Should I uncheck "Minimize metadata"?
Thanks for your help.
jm47
Thanks Hal. So there is no way to minimize the metadatea but keep the
Title/Caption info?
jm
Le 1/03/10 21:05, « Hal P Anderson » <[email protected]> a écrit :
Unchecking minimize metadata will do what you want.
Hal
>
Similar Messages
-
When I export a group of jpg's from RAW files, only the first one retains it's title and caption.
If I try to export a handful of images at the same time, the title and caption is stripped out at export. This happens on 5, 15 or 50 images. If I export them one by one the information is retained. It seems to me that only the first or one image can retain it's title and caption.
Does anyone know why and how to fix this?
LR 5.2 on Windows 7.Very strange. Haven't heard of any similar reports, so it doesn't sound like a very common problem. Maybe try resetting your preferences file, but if that doesn't work all I can suggest is to raise the problem at the official Adobe feedback site.
For resetting the preferences file, see here:
http://www.lightroomforums.net/showthread.php?14226-Resetting-(or-Trashing-)-the-Lightroom -Preferences-file -
In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?
Check those boxes in the export dialogue - Exporting From iPhoto
LN -
How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby. -
Sync self made slide shows from with titles and music to I TOUCH
Trying to sync pictures i have put into slide show with titles and music to I touch is there away
Why not make a movie with iPhoto/iMovie?
-
Digital photo professional - export JPG from RAW
Hello!
i have a problem with program Digital photo professional, when i want export images from RAW format to JPG.
The problem is, that quality of image is much more worse, then in RAW format in DPP. JPG looks blurred and fuzzy.
IMAGE LINK:
Please check image, on the left side is print screen from RAW in DPP, on the right is exported JPG from DPP.
I want export JPG with the same quality as i see in RAW
Is there anybody to help me?
Thanks a lot.
Vit1. open *.CR2 (raw file) in DPP
2.file/convert and save
3.type of file - EXif JPEG (JPG, JPEG)
4.image quality 10
5.output resolution 350dpi
6.check - embed icc profile in image
There are not another settings, so i dont know, why has exported JPG so bad quality...
When i open *.CR2 file in PS5, i see the same bad quality as exported JPG from DPP, but i read, that PS5, cannot
open CR2 file in best quality, because PS5 doesnt have all function, that have DPP.
I tested it on two PC, so problem is not only on my PC...
Thanks. -
Now that the photo gallery in MobileMe is ending, is there another photo sharing site to which existing iPhoto albums can be transferred as is, with photos in the same order and with titles, and with minimal problems?
No. If you don't have the album you originally used to create the galleries you can do so by dragging the photos from each gallery to a new, empty album. Then when you find the photo sharing site/option you have decided on you can easily upload each album to the site.
Another option is to obtain a hosting service and create iWeb photo pages for each album and future albums similar to this photo page in one of my demo sites: iPhoto Book as an iWeb Slideshow. Or you can use the iWeb album page and have an album for each iPhoto album on it like on this demo page: Page-7 .
OT -
hi i want to buy an ipad from america with cellular and i want to connect it in jordan does the network work in my country JORDAN , because i dont see unlock ipad in apple store??
in apple store no ipad unlock for cellular if i bring it with cellular from america does it work in JORDAN ??
THNANK ALOTUS iPads are not locked to a carrier. Don't buy a Verizon or Sprint model, though.
Regards. -
Export jpgs from final cut pro x
How do I now export jpgs from my final cut pro x?
They seemed to have changed it in the new version.From the Share popup select Add Destinations. You see it in the Destinations preferences.
-
I have messed my MacBook Pro attempting to customize it. I am far from savvy with technology and I would like to erase and reset it to out of the box brand new and start over
Polly,
usually there are multiple models of MacBook Pro per model number, but in the case of your model number (A1502), there’s currently only one model for that model number: 13-inch Late 2013.
To reset your MacBook Pro, you’ll need to boot into Recovery mode by holding down a Command key and the R key as you start it up. When the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk (most likely the top item of the list). On the right-hand side, select the Erase tab. For the Format dropdown, select “Mac OS Extended (Journaled)”. For the Name input box, “Macintosh HD” has traditionally been the default name — I don’t know if that’s still the case for the Late 2013 models. After that, press the Erase… button, and erase its entire internal disk. When it’s finished with the erasure, exit Disk Utility, and select Shut Down from the Apple menu. When you start it up again, OS X Internet Recovery will redownload Mavericks from Apple’s servers and reïnstall it on your internal disk. Once it has reïnstalled, run Software Update to get it up to date, and adjust the System Preferences to your taste. -
Ask the Expert: Cisco UCS Troubleshooting Boot from SAN with FC and iSCSI
Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco UCS Troubleshooting Boot from SAN with FC and iSCSI with Vishal Mehta and Manuel Velasco.
The current industry trend is to use SAN (FC/FCoE/iSCSI) for booting operating systems instead of using local storage.
Boot from SAN offers many benefits, including:
Server without local storage can run cooler and use the extra space for other components.
Redeployment of servers caused by hardware failures becomes easier with boot from SAN servers.
SAN storage allows the administrator to use storage more efficiently.
Boot from SAN offers reliability because the user can access the boot disk through multiple paths, which protects the disk from being a single point of failure.
Cisco UCS takes away much of the complexity with its service profiles and associated boot policies to make boot from SAN deployment an easy task.
Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past three years with a primary focus on data center technologies such as Cisco Nexus 5000, Cisco UCS, Cisco Nexus 1000v, and virtualization. He has presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE certification (number 37139) in routing and switching and service provider.
Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past three years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000v, and virtualization. Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and VMware VCP and CCNA certifications.
Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center community, under subcommunity Unified Computing, shortly after the event. This event lasts through April 25, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.Hello Evan
Thank you for asking this question. Most common TAC cases that we have seen on Boot-from-SAN failures are due to misconfiguration.
So our methodology is to verify configuration and troubleshoot from server to storage switches to storage array.
Before diving into troubleshooting, make sure there is clear understanding of this topology. This is very vital with any troubleshooting scenario. Know what devices you have and how they are connected, how many paths are connected, Switch/NPV mode and so on.
Always try to troubleshoot one path at a time and verify that the setup is in complaint with the SW/HW interop matrix tested by Cisco.
Step 1: Check at server
a. make sure to have uniform firmware version across all components of UCS
b. Verify if VSAN is created and FC uplinks are configured correctly. VSANs/FCoE-vlan should be unique per fabric
c. Verify at service profile level for configuration of vHBAs - vHBA per Fabric should have unique VSAN number
Note down the WWPN of your vhba. This will be needed in step 2 for zoning on the SAN switch and step 3 for LUN masking on the storage array.
d. verify if Boot Policy of the service profile is configured to Boot From SAN - the Boot Order and its parameters such as Lun ID and WWN are extremely important
e. finally at UCS CLI - verify the flogi of vHBAs (for NPV mode, command is (from nxos) – show npv flogi-table)
Step 2: Check at Storage Switch
a. Verify the mode (by default UCS is in FC end-host mode, so storage switch has to be in NPIV mode; unless UCS is in FC Switch mode)
b. Verify the switch port connecting to UCS is UP as an F-Port and is configured for correct VSAN
c. Check if both the initiator (Server) and the target (Storage) are logged into the fabric switch (command for MDS/N5k - show flogi database vsan X)
d. Once confirmed that initiator and target devices are logged into the fabric, query the name server to see if they have registered themselves correctly. (command - show fcns database vsan X)
e. Most important configuration to check on Storage Switch is the zoning
Zoning is basically access control for our initiator to targets. Most common design is to configure one zone per initiator and target.
Zoning will require you to configure a zone, put that zone into your current zonset, then ACTIVATE it. (command - show zoneset active vsan X)
Step 3: Check at Storage Array
When the Storage array logs into the SAN fabric, it queries the name server to see which devices it can communicate.
LUN masking is crucial step on Storage Array which gives particular host (server) access to specific LUN
Assuming that both the storage and initiator have FLOGI’d into the fabric and the zoning is correct (as per Step 1 & 2)
Following needs to be verified at Storage Array level
a. Are the wwpn of the initiators (vhba of the hosts) visible on the storage array?
b. If above is yes then Is LUN Masking applied?
c. What LUN number is presented to the host - this is the number that we see in Lun ID on the 'Boot Order' of Step 1
Below document has details and troubleshooting outputs:
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-b-series-blade-servers/115764-ucs-san-tshoot-00.html
Hope this answers your question.
Thanks,
Vishal -
hi,
i have a sharepoint custom list with Title and image attachments, now i want to display image attachments in div based on the title.i am using the below code only
SPSite mySite = new SPSite("http://sharepoinsiteaddress");
SPWeb myweb = mySite.OpenWeb();
SPList myList = myweb.Lists["Announcements"];
SPListItem myListItem = myList.GetItemById(1); foreach (String attachmentname in myListItem.Attachments)
String attachmentAbsoluteURL = myListItem.Attachments.UrlPrefix // gets the containing directory URL
+ attachmentname;
// To get the SPSile reference to the attachment just use this code
SPFile attachmentFile = myweb.GetFile(attachmentAbsoluteURL);
// To read the file content simply use this code
Stream stream = attachmentFile.OpenBinaryStream(); StreamReader reader = new StreamReader(stream);
String fileContent = reader.ReadToEnd();
here i am using panel, how can i attach this attached image to panel -
What's the difference and purpose of Keywording and metadata such as title and caption etc?
What's the difference and purpose of Keywording and metadata such as title and caption, crator, sublocation , label etc? Where & how is the information used? Where does it appear?
Keywording is primarily for your own use for finding photos fast.
Title, Caption, etc are also for your own use but can be used by your clients or your stock company if you do not <Minimize Embedded Metadata> on export. Keywords are also included on export but are hardly of any use to others - unless you follow a standard for keywording.
You have the option of selecting title, caption, etc to appear in a Slide Show, on Print, or on a webpage created with LR.
If you go to the LR Help menu and type "title", or "caption" in the search box you will find plenty of advice for this.
WW -
How do you share thousands of pictures with text and captions outside of PSE? (PSE 4)
One of my dad’s retirement passions is family genealogy and old family pictures. Several years ago I gave my family PSE 4.0 for Christmas so that we could each have backup copies of our dad’s pictures. Usually once per year, I made backup copies of everything and emailed the DVDs to my brothers and sisters. Everyone knows the basic PSE 4 functions and share our dad's enjoyment with the old family photos.
My problem is that my dad is running out of pictures to scan. He wants to “share” or “show” his photos with others so that he can “borrow” their photo albums in order to scan their photos. He plans to attend a hometown high school reunion later this fall. He hopes to "collect" photo albums from cousins and classmates. I have been struggling with this for several days without any good ideas.
The scanned pictures lack any text (added as a layer?) or captions. Creating a slideshow (on my dad’s computer is slow). Also, a slideshow doesn’t let others select individual pictures to save from the slide show
He has old pictures pre-PSE 4 that allowed him to add captions directly to the picture when it was scanned. I never liked this approach as it "destroyed" the actual picture but these old pictures are more easily shared as individual pictures.
How do you share thousands of pictures with text and captions outside of PSE? Can you save or export a composite picture with all the layers?
Thanks in advance for your help and replies.I think it is one of the printer option screens that gives me the choice of tabbed 4x6. All of the choices specifiy HP or Other so I am pretty sure it is printer software that offers me this choice.
Make sure your image has a 4x6 aspect ratio. I have been quite happy with the tabbed 4x6. Just need to remember to load the paper with the tab last.
So, in elements you set to 4x6, in printer options you should be able to choose 4x6 tabbed paper. -
I imported an album from iPhoto. All the photos were titled and captioned. The pictures showed up just fine in iMovie, but non of the titles or captions. Do I have to redo all that or is there some way to have them show up?
Matt--The problem with iDVD is that all captions and titles are displayed against a blackish grid that cuts off the bottom of a lot of the photos. This grid shows up even if there isn't a title or caption.
In my first attempt to burn a disk from iDvd, it played fine for about 10 minutes. Then froze up and displayed the message "system error 69902". I couldn't go forward or back.
Maybe you are looking for
-
Ipod will not restore, I keep getting error message 1604
I have an Ipod 3rd generation touch and when I was syncing my ipod it asked if I wanted me to restore it. I went through the step to restore the ipod and but it won't restore and I keep getting message 1604....does anyone know how to fix this ! !
-
In iMovie, audio tracks from iTunes won't play.
Whenever i add an iTunes track, that track won't play. I've fiddled with the volume, my computer volume, and lots of other stuff. Help!
-
Every movie I have rented and purchased the audio is out of sync with the video. If I pause the movie sometimes it goes back into sync but doesn't last long before it goes out of sync again. I have been trying to resolve this issue for the past week.
-
How not to show my full name in itune store
when i publish the application, how do i set it name instead of my full name
-
How Do I Find How Much "space" My Documents uses
Were can i find how much hard drive space my documents occupies. I'm trying to save to the cloud but I'm not sure how much I need to purchase....