URGENT : FICO Test Scenarios.

Hi All,
I am new to FICO, and I am presently required to prepare Test Cases for the various scenarious.
Can anyone of you please pass on any of the Test Case Documents you have been preparing and testing the scenarious.
And also can anyone let me know how to prepare a test case.
This is very urgent for me.
Thanks and Regards,]
Venu

Hi Venu,
Test case scenarios are defferent for each and every client and they are following their won templates, see you have to take that templates.
Then you can prepare the test case based on business requirement, You have to know that, what is the input data , what you are expecting result and look and feel of that transaction or screen, if there is any validation for that requirement.
Based on the test case , you need to test that transaction.
User will test that transaction or QA analyst will test it .
thanks
Naidu.

Similar Messages

ABAP HR-test scenario for payslip-urgent

Hi,
please send me some test scenarios for payslip by which payslip can be affected.
I have designed a PAyslip with retro and i want to test it.
eg. retro. means if retro will run then it will affect payslip.
Also send me some unit test cases in case of any payslip requirement.
Points will be rewarded.
Regards
Monika

Hi,
Just give an entry in infotype 8, 14 or 15 for previous month and run the payroll than retro will run, than compare results using wage type reporter.
When you run the payroll give the sandard SAP Remuneration and compare the results in the SAP payslip and payslip you have developed.
If you have developed payslip using PE51 than the retro amounts are picked authomatically.
Regards,
Ramu N.

Documentation on the SAP FICO testing

Hi,
Can any one provide me the Documentation on the SAP FICO testing. please its bit urgent.......
thanks in advance

Hi
The testing can be process testing and integration testing. There is no documentation as such for the FICO testing.
In the process testing, you can test each and every transaction within the FICO and in the integration testing you can test the End to End process like Procure to pay, Order to Cash etc.
It is a good idea to plan the test scenarios that meets the business requirement in the first place.
Thanks
Ashok

Document for test scenarios in Construction

Hi
Does anyone has documents with test scenarios(steps) in SAP SD for Construction business.
Please mail the same to my mail id, Urgent help needed
Regards
Hitesh

Hello!
Did you check at the Best Practices website?
You can find some scenarios steps in the document "Business Process Documentation": http://help.sap.com/bp_eco604/BBLibrary/Documentation/447_BPP_EN_US.doc
http://help.sap.com/bp_eco604/BBLibrary/HTML/447_EN_US.HTM
The link to the Construction Best Practices is http://help.sap.com/bp_eco604/ECO_US/HTML/index.htm
I hope this helps.
Regards,
Rafael

FICO Testing

Hi Guys,
Can one you please tell how can we test the SAP FICO module with writing test scripts and test plans
if any has done before can you please let me know how to write the sample test scripts and test plans for FICO Module .
Thanks
DP

Hi,
Test plan is different and Test script is different. Each client has their own testing tool to track the scripts and test scenarios.
However, many follow is to create a
1) Test plan : this plan is the list of TCODES and selection parameters we use to test a scenario.i.e SCENARIO DRIVEN Plan
and this plan can be used for several testing cycles of the client for diferent projects of client for that paricular
scenario.
2) Test Script : Based on Test plan testing is done.
Eg.FIGL JV Postings: TEST PLAN is the list of below TCODES to be tested for this scenario.
FI> FIGL JV Postings> [1]FIGL F-02 Post Document - by line
FI> FIGL JV Postings> [1]FIGL F-04 Post with Clearing
FI> FIGL JV Postings> [1]FIGL FB01 Post GL Document
FI> FIGL JV Postings> [1]FIGL FBD1 Create Recurring Document
FI> FIGL JV Postings> [1]FIGL FB03 Display FI document FIBP-GL011
FI> FIGL Foreign Currency Valuation Postings> [1]FIGL F-02 Post Document - Account Assignment
FI> FIGL Foreign Currency Valuation Postings> [1]FIGL F.05 Post Foreign Currency Valuation
Within the TESTPLAN for eg.
FIGL F-02 Post Document STEPS would be the following
STEP NO.1
Desription
Execute T-code F-02
Finanical accounting>general ledger>document entry>others>general postings
Expected
Screen "Enter GL account posting:header data" will appear
Actual
Screen appears
STEP NO.2
Desription
On screen "Enter G/L Account Posting: header data"; enter information in below:
Document date:
Document type
company code
posting date
period
currency
Enter Posting Key (40 - Debit; 50 - Credit) and General Ledger account.
Hit Enter key.
Expected
Next screen "Enter GL account document: Add GL account item" appears.
Actual
Entered data for CC 6520
Below is the test script with Run nos generated in Quality system and client which is used to track.
FIGL JV Postings:
FI> FIGL JV Postings> [1]FIGL F-02 Post Document - by line> DIR-80643_QN4-330_2_Run_8
FI> FIGL JV Postings> [1]FIGL F-04 Post with Clearing> DIR-80643_QN4-330_2_Run_8
FI> FIGL JV Postings> [1]FIGL FB01 Post GL Document> DIR-80643_QN4-330_2_Run_8
FI> FIGL JV Postings> [1]FIGL FBD1 Create Recurring Document> DIR-80643_QN4-330_2_Run_8
FI> FIGL JV Postings> [1]FIGL FB03 Display FI document FIBP-GL011> DIR-80643_QN4-330_2_Run_8
FI> FIGL Foreign Currency Valuation Postings> [1]FIGL F-02 Post Document - Account Assignment> DIR-80643_QN4-330_2_Run_8
FI> FIGL Foreign Currency Valuation Postings> [1]FIGL F.05 Post Foreign Currency Valuation> DIR-80643_QN4-330_2_Run_8
Hope your question is clarified.
Thanks
G.Bharathi

Idoc-XI-file test scenario

i m new to XI,
i wanna make a test scenario for idoc-XI-file...
i donno what an idoc is.......
tell me how to create an idoc from the very basics....like message type, segment, partner profile, port creation, etc,..... and how to fire an idoc from the R3 system to my XI system,
and ofcourse... ican do the rest of mapping and all, with the file message type

Hi Sudeep,
1. steps for creating customized Idocs..
we31- creation of Segments
we30- creation idoc types
we81- creation of Message types
we82- assigning message type to Idoc type...
2. R/3 Configuration settings
SM59 - creation of RFC destination...
we20 - creation of Ports
We21 - Creation of Partner profiles..
3. XI Configuration settings
SM59 - Maintain RFC destination,
IDX1 - Maintaining port for XI
IDx2 - Loading the Idocstructure into metadata repository
These are the settings to be done before starting ur scenario..
I think this will help you... points...
regds,
vasanth.

Auto router release in AP Invoice Test Scenario

Hi Gurus,
Please guide me how to prepare test script for Auto router release in AP Invoice Test Scenario.
Thanks for the Support.
Regards,
Bapu

hi,
It can be auto released only in the following case:
Original PO - 500$
When you have the IR for 1000$..
case 1:
You make the changes in the PO and give price as 1000$...
Or...
Case 2.. make the subsequent credit in the mean time for 500$..
So after this when you visit the MRBR tcode, system will auto release it...and the reasons becomes invalid over a time period...
Regards
Priyanka.P

Test scenarios in WM

Hi Guys
Please any body can provide all Test scenarios in WM Like BIN-BIN transfer
Inbound ,outbound delivery,PP,SD,MM integrations.
Thanks in advance
SAP MM

Hi Santosh,
Help.sap provides us more details in this section
ID point
http://help.sap.com/saphelp_46c/helpdata/en/c6/f846aa4afa11d182b90000e829fbfe/frameset.htm
Pick Point
http://help.sap.com/saphelp_46c/helpdata/en/c6/f847124afa11d182b90000e829fbfe/frameset.htm
Two step picking
http://help.sap.com/saphelp_45b/helpdata/en/c6/f842744afa11d182b90000e829fbfe/content.htm
You can use ID/Pick point :
     If Incoming stock is following some process but its not the final destination
     Example for this could be say, X-ray scanning of incoming Boxes
     Weighing of Incoming/outgoing goods (mostly followed in case of tanks)
     When means of transport gets changed ..i.e. from fork lift to conveyor
There can be more specific Business scenarios where we can turn this functionality as per our requirment.
The only difference in ID point / Pick point is ID point does not need SU mgmt where as if you are working with Pick point you must activate SU mgmt
For two step picking ..as name suggests its carried out in two steps .this is used in case of multiple processing where wave picking / zone picking is applicable. This can be mapped for Deliveries and also for TR. Here intrim storage type 200 plays an important role , this is an logical storage type. Steps involved here is Pick & allocation.
First you Pick , stock gets posted at 200 with dynamic quant refernce number as Bin , perform the operation like Labelling , Putting Bar-code , Inspection etc . once everything is okay you confirm the TO & allocate to final destination.
Generally two step picking is used where less time is consumed at logical storage type.
Thanks,
mahesh

Test scenario for payslip testing

Hi,
please send me some test scenarios for payslip by which payslip can be affected.
eg. retro. means if retro will run then it will affect payslip.
Also send me some unit test cases in case of any payslip requirement.
Regards

Hi,
Just give an entry in infotype 8, 14 or 15 for previous month and run the payroll than retro will run, than compare results using wage type reporter.
When you run the payroll give the sandard SAP Remuneration and compare the results in the SAP payslip and payslip you have developed.
If you have developed payslip using PE51 than the retro amounts are picked authomatically.
Regards,
Ramu N.

JDBC Sample Test Scenario

Hi All,
Could any one guide us to some successfully working Sample Test Scenario Documents for SAP XI 3.0 using JDBC Adapter which we need to work on asap.
Thanks in advance,
Venkat!.

Hi All,
I am working on a jdbc to file scenario, Now that I am trying to connect to MSaccess, I have provided the following driver and connection parameters.
Database is in my local machine
Driver: jdbc.odbc.JdbcOdbcDriver
Connection url: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=D:/database_emp/EMP_Details.mdb
with table as EMPLOYEE
select query as SELECT * FROM EMPLOYEE WHERE FLAG='No'
Update as UPDATE EMPLOYEE SET FLAG='Yes' WHERE FLAG='No'
Having given that, when i m executing the scenario I am getting the following error
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (.mdb)};DBQ=D:/database_emp/EMP_Details.mdb' using the JDBC driver 'jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver (.mdb)};DBQ=D:/database_emp/EMP_Details.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
in the sender CC.
Please help.
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on Jan 19, 2009 11:02 AM

XI doubt and test scenario

Hi,
I need some advice on the following:
We are having XI 3.0, ECC 5.0 and also have GIS Server (Gentran). We need to use these servers to convert the data from XML to IDOC (inbound to sap) as well as to XML from IDOC (outbound). We came to know GIS will take care of converting the outside data to XML and send it across to XI as IDOC as well as take the IDOC from XI and convert it as XML before sending data outside. The question is what are the configuration to be done in ECC, XI and GIS to make the things happen. Do we need to use any adapter or XI itself has got any inbuilt adapter ? is there any blog or any link to any document which tells about configuration and any test scenario to try the above mentioned scenario ?
At present not much data's in ECC system, in this case is there any test scenario provided by SAP in XI or ECC to test some initial scenario like sending data from ECC to XI as an IDOC for file integration...
Let me know if any more information required from my side.
Thanks

Hi Aravind,
You can navigate through these links to get the details you require:
http://help.sap.com/saphelp_nw04/helpdata/en/d7/f01a403233dd5fe10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards,
Chandra

Test Scenario Error

Hello All ~
I am a novice to DocuMaker Studio and I am trying to run a test scenario but keep getting the following error. Can anyone shed some light?
[12:17:56PM] Error: Write Exception at 0x0039e27c - Attempted to Write to 0x00000000
[12:17:56PM] Error: An exception occurred in Gendata.
Thanks

> The Program name which you have defined in the TCP/IP
> Connection needs to be registered in the J2EE Visual
> Admin. until you do that this will not work.
This is not needed at all.
Your RFC adapter and the TCP IP Connection should use the same Program ID. No need for registering it in the VA.
Just make sure that the Gateway Host and Service in the Sender RFC adapter and in the TCP IP Connection use the Gateway Host and service of the R3 system.
Regards
Bhavesh

Test scenario and test plan

Hi All,
Can somebody explain what is a test scenario and test plan with an eg ( For eg FB 60). and what are the essential things one needs to incorporate for test scenario and a test plan
Appreciate your help.
Thanks
SM

Hi,
I am giving you the information on test plan and test scenario below. Please note that this is with reference to Solution Manager.
You create a test plan for a project in the SAP Solution Manager if you want to reuse the project structure created in the Business Blueprint for a process-oriented test. You can select all the test cases and transactions which you have assigned to the project structure, for the test plan. These test cases are performed by testers; they can call assigned transactions and run test cases in them.
Test Scenarios are nothing but the end to end business processes which are to be tested.
Hope this helps.
Rgds
Manish

Test scenario for Physical Standby

Dear Team,
Could you please share the Test scenario for Physical Standby.
1. Read only.
2. Switch Over
3. Fail Over.
Many Thanks in Advance
Arjun.

You didnt mention the version.
Oracle10g Release 2, Data Guard Switchover and Failover best practices
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_SwitchoverFailoverBestPractices.pdfOracle9i, Data Guard Switchover & Failover best practices
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_9iSwitchoveFailoverBestPractices.pdfKhurram

Tax code - test scenario

I have recently updated an internal tax table applied to stock options for employees. Can someone please guide me on how I will do a test scenario for this?

The Input and Output Tax has to be specified in FTXP, then go to T.code: OBCL then allocate the Input and output tax code to the company code and save.

URGENT : FICO Test Scenarios.

Similar Messages

Maybe you are looking for