Urgent For Desginer Experts

Hi, Every body
I found some problems with Oracle Service So I reinstalled Oracle 8i ,its OK now and I can access SQL
But I have Some projects with Designer 6I and I reistalled Desginer 6I too
Now When I try to enter Designer after entering the User name and the Password (For REPOSE) I cant access any project even I cant choose any WORKARE or Make New WORKARE
What happened and how can I acess my previous Projects
Any Help PLS
Thanks

Hi, Farrag!
Sorry, but I don4t understand very well you problem. Did you reinstall your repository database? and can you work with
it fine with another tools like schema manager or the repository administration utility?

Similar Messages

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

Very Urgent for Template

Hi all,
Its very urgent for me to develop RTF template so please any one have templates for the following reports.
1.AR invoice.
2.Customer Statements.
3.Dunning Letter Print.
please any one have templates for the above reports please send immediately and it will be great helpful for me. my mail id is [email protected]
Thanks and Regards
Prabu

Hi Ratnesh/Prabhu
I am working on AR Invoice Report. can anybody send me the Template pls.
my yahoo id is [email protected] along with source code.
Ratnesh: I have some issues with this report
We have seeded reports in Oracle apps. Lets take an example of a purchase order report. Say the seeded out-of-the-box report has the following information:
PO number, PO details
I can go ahead and use the template builder and create a nice looking report with that information.
Now, lets say that I want to display the supplier name in my purchase order report. Since the seeeded purchase order report does not have the supplier name (it is not there in the xml generated by the standard out-of-the-box report), the only way I can display the supplier name on the report is by querying up the supplier table and getting that information. I know that I can go ahead and modify the existing out-of-the-box report, but I do not want to do that. I do not have control over the XML that is generated since the XML is generated when the report is run. Is there any way to retrieve the extra information (the supplier name in this example) AFTER the xml has been generated and BEFORE the template is applied ?
My Actual requirement is :
I have the same requirement to develop AR Invoice Report in XML publisher, actually it was developed using Optio Layout.my issue is the actual AR Invoice RDF contains 20 records and it showing the 20 recodes when we run that program (concurrent program output) after that while printing this report uisng the OPTIO layout (The Optio system is fetching some more records (10 records)) it printing total 30 records. i mean here the OPTIO is handling some pl/sql code i guess..
so now how we can handle this requirement using XMLP.I am using RTF Templates with 5.6.2 v. Is it possible to do the same manner how the OPTIO was doing. Is this possible with any other Templates ?. or we need to customize the RDF itself ? .but I know that I can go ahead and modify the existing out-of-the-box report, but I do not want to do that. I do not have control over the XML that is generated since the XML is generated when the report is run. Is there any way to retrieve the extra information AFTER the xml has been generated and BEFORE the template is applied ?
I really appriciate u r replay..
Thanks,
Madhu

Implementation guide for ESS/MSS. Urgent for ECC6 and Portal 7.

HI ALL,
i need documents on Implementation guide for ESS/MSS. Urgent for ECC6 and Portal 7.
Thanks in advance.

Hi
Please go through the link in the below thread.
/message/3262434#3262434 [original link is broken]
Also try this ESS - 4.6C version to gain some knowledge:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
If this helps, pl do reward.
Thanks
Narasimha

May i go for sql expert(1Z0-047) exam or 11g sql fundamentals 1(1Z0-051)

Hi all,
Please suggest me, may i go for sql expert(1Z0-047) Test or 11g sql fundamentals 1(1Z0-051) Test with
oracle Administration 1(1Z0-042) Test.
Which will be the best option.
Thanks & Regards

You may use either exam along with the Oracle Administration 1 (1Z0-042) exam if your goal is to get a 10g DBA OCA credential.
The SQL Expert exam is quite a bit more challenging than the SQL Fundamentals exam. On the other hand, the SQL Expert exam gives you a separate SQL Certified Expert credential. If you can pass it, you should take the SQL Expert exam.
Justin

$$$ for Flash expert who has used the FLA files from ID

I am looking for an expert to hire for a few hours on an Adobe Connect session to go over the ins and outs of exporting FLA to Flash Pro CS5.
If you are familiar with the output of FLA from ID CS5 and can open them and work with them in Flash Pro CS5, please contact me directly.

Sandee has informed me that she's found someone.
Bob

How get guided installation for a expert?

Hello everyone, how can I get a guided Installation for a expert of SAP?
The BPC 7.5

Hi,
Are you looking for installation guide for BPC? If yes, it is available in SMP in the below link:
https://websmp107.sap-ag.de/~sapdownload/011000358700000986502009E/SBOP_PC_75_M_SP05_Install.pdf
Hope this helps.

It's totally impossible install more RAM in a MBA, namely, even for an expert?

I want to buy a MacBook Air, the basic model of 13 inches, but all I want is to increase the RAM to 8 GB but without having to buy in the Apple Online Store, and let me know if can add more RAM, not precisely for me, but for some expert or professional.

CoreyMendez wrote:
I want to buy a MacBook Air, the basic model of 13 inches, but all I want is to increase the RAM to 8 GB but without having to buy in the Apple Online Store
It's only $100 more and worth every penny!

? for the experts regarding the HP Pavilion dv7t Quad Edition (with the new Sandy Bridge CPU's)

Hello,
This is a question for the experts.
The HP Pavilion dv7t Quad Edition has the following GPU:
1GB ATI Mobility Radeon(TM) HD 6570 graphics
Is this GPU GDDR5 or DDR3 in this laptop? I know someone that purchased one from a MicroCenter and it shows GDDR5 on the packaging (http://www.flickr.com/photos/bravoexo/5298674802/) and in GPU-Z, but I called HP support and they said it was DDR3 (although, HP support told me that GDDR5 didn't exist and that DDR3 in GPU's were the most advanced to this date).
Please let me know ASAP, as this is a main factor in me purchasing this or not. I can find other DDR3 gaming laptops out there for less, but if this really IS GDDR5, then I'm sold.

Thank you both for your questions and answers, I was wondering the exact same thing. I'm ashamed to admit I already began the process of perchasing this computer prior to having all detailed specifications made available.
I'm upgrading from a 13.3 inch HP laptop called the dv3510nr. It was never intended for enthuiast gaming, but it has exceeded the sum of its parts. It does have dedicated graphics, backlit keyboard, other novelties that make it the best computer I've personally ever owned.
Few people can say they've managed to run Fallout 3 or Supreme Commander at maximum detail on a 9300M GS. It has 512 MB of DDR2 memory, 4 GB system memory and a 25W P7350 Core 2 Duo processor (2.0 GHz)
Its served me well but mobility is no longer a priority. I waited until Sandy Bridge was announced and took the plunge immediately. 6 GB of DDR3 RAM, a 6570 with 1 GB, 1600 x 900 display AND best of all:
-The i7-2720 quad core processor, (2.2 GHz, up to 3.3 GHz with Turbo Boost)
--for a total price of just over $1,000 after taxes. With 2 year warranty standard.
For brand new, bleeding edge technology not yet even widely available, at such a large upgrade margin at an absurdly low price; I didn't need to know anything else.
So imagine my excitement when I learned this 6570 was in fact based on the old 5770 (the lowest available card with GDDR5 support), not the 5650; and could contain a 1 full GB of the fastest memory technology on the market, GDDR5.
That would mean virtually no bottlenecks in my system as a whole; I don't have an SSD but truth is, I don't like them anyway. They don't last very long with 'wear leveling', cost too much and only impact synthetic benchmarks.
My new DV7 can't get here fast enough.

The account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order, please respond as soon as possible.

My email account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order process, please respond as soon as possible.
<Email Edited by Host>

This is a user-to-user technical support forum. No one here can help you.
Try
https://expresslane.apple.com

Challenge for Smartform experts

Hi Experts,
I have a complex requirement in smartforms.This should be done in ECC 6.0.The text should be printed in the followong way in the same page.
fhsdjhrfwesuhtfwehgkjd          -
jkkdngfjeifgrisjgsrgeg
hdgdsbgbfgjhughugejs           bhdsbfdsbfbdbfjjbiuhsufhb
jhbfjhaushrawBadfjsbn           sbfjnwefhjhgnjdnzgsidhgg
jbjgjdsgieoshgiegiejeiir           wengfeiwfgireiendfna;snfg
dfioefioejgeigjndfeifjejfn           ensedgfneidngknfgkdnnik
bjfbedfgdnsgndjs----
            jnfiesfhiesonhgininbgdgjn.
This is just like the news paper format.This is the dynamic text where in when the text of the left paragraph overflows it should continue on the right side.Please help me as soon as possible.Its an urgent requirement.
Point rewarded on the best help.
KK

Hi,
For what it matters I went to the site, using Safari (Version 2.0 (412.2)) and it loaded likety-split. You do get the "white outlines" but just for a split second (as place holder indicators).
I noticed you're using images as background color in the places/spaces for the contact info. I'm not a web master but could it be possible that the loading of the "grey image" is futzing up your other image loads?
I loaded the page in Firefox for mac as well and there are some issues there - the "Select Work" links to the projects won't work at all - sorry - I know you maybe didn't need more bad news.
Good luck!
Andrew

Are these things possible in PDF forms? Questions for the experts

Hi,
I have a project where I need to create an online application system, where the user has to fill in a form where the results have to be saved into a database.
I wanted to create a html based form, but then someone told me PDF can also do cool things, so I’m researching that road.
I already managed to create a simple form and submitting it to a web service (java servlet in my case) and that works pretty nicely.
I'm new to the whole PDF form creating and I’m wondering if certain things are possible. So I’m trying the experts in this form for a yes/no answer.
Are the following things possible with PDF forms:
1) validation: number & date checks, eg, a number should be higher than 4, or be a valid number/date
2) If I answer A at question 1, I should skip Question 2 and go directly to Question 3. Is it possible to hide Question 2, depending on what I answered at Question 1?
3) Is it possible to attach files to the form, like a photo? And also upload it to the web service.
4) After I submit the form, is it possible to lock the form so that no other changes can be made? In other words, you may only submit once.
5) Possible to activate the print button after the form has been submitted?
6) Can a drop-down lists be dynamic? Instead of hard coding the list, calling a web service to fill the values?
Thanks in advance for any insight,
Kind regards
Ido

Hi Paul,
thanks for the quick answer. No my next challange is how to do things
1) validation: number & date checks, eg, a number should be higher than 4, or be a valid number/date
<answer> Yes
I think this is done through the object properties
2) If I answer A at question 1, I should skip Question 2 and go directly to Question 3. Is it possible to hide Question 2, depending on what I answered at Question 1?
<answer> Yes
This is done with subforms and scripting?
3) Is it possible to attach files to the form, like a photo? And also upload it to the web service.
<answer> PDF does support the ability to have attachments. They would be includeed as part of the PDF so you woudl have to submit the entire PDF and then extract the attachments when you get the file to the server. Note that you will require to Reader Extend the document to allow a Reader user to add the attachment. This is not a requirement if you are using Acrobat.
Have to look into this one.
4) After I submit the form, is it possible to lock the form so that no other changes can be made? In other words, you may only submit once.
<answer> Yes
Also through scripting?
5) Possible to activate the print button after the form has been submitted?
<answer> If you add a print button on the form then the answer is Yes. The application that houses the PDF will jhave print capabilities and that one is much more difficult to hide. You can set it up so that the form cannot be printed then return back the locked version with printing enabled but a round trip to the server is required for that.
Print button will be fine by now, probably also done by scripting
6) Can a drop-down lists be dynamic? Instead of hard coding the list, calling a web service to fill the values?
<answer> Yes but the form will require LiveCycle Reader Extensions if you are using Reader. Reader Extensions is not required if you are Acrobat.
Ahh, perhaps fixed list will be ok for version 1

This is a problem for the experts around here

I really need help with this - I have been trying to get this
to work for 2 weeks now and so far no one has been able to help.
See
http://www.kirupa.com/forum/showthread.php?t=248030
and
http://www.kirupa.com/forum/showthread.php?t=249806
for my previous attempts at figuring this out.
I am attempting to use components in my flash movie, but when
I test the movie, none of the labels show up.
The components are placed into a movie clip that is
instantiated and manipulated at runtime - in other words, it exists
only in the library and is called into existence at runtime through
the attachMovie method.
On the side of the screen are buttons that make this MC move
around the screen.
These components I am trying to use are not being rotated,
just moved (because they are inside a MC that is being moved). I've
tested this and have determined that moving a component at runtime
does not cause the text to disappear - only rotating it does.
If you need it, I have uploaded the
source
file
. Just run it and you'll see the component - with no text
displaying. The rows should be labeled "1" "2" and "3".
If you get this far (downloading and looking at the source
fla) I will go the distance here and point you directly to where
this object is located. Simply open the fla's library and double
click on the
searchAreaContent
movieclip inside the
search panel
folder. You will find the component in there. Thanks in
advance for any help!

Daleweb,
The method to create components and place them on the stage
is this (example
is for a checkBox component):
import mx.controls.CheckBox;
placeHolder.createClassObject(CheckBox, "myCB1",
{label:"Yes"});
myCB1._x = 100;
myCB1._y = 100;
I did not download your zip file however, when you load
components into
child clips, they can lose their functionality. Instead, load
them at
level0.
hth
Dan Mode
->Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"dalewb" <[email protected]> wrote in
message
news:[email protected]...
>I really need help with this - I have been trying to get
this to work for 2
> weeks now and so far no one has been able to help. I am
attempting to use
> components in my flash movie, but when I test the movie,
none of the
> labels
> show up.
>
> The components are placed into a movie clip that is
instantiated and
> manipulated at runtime - in other words, it exists only
in the library and
> is
> called into existence at runtime through the attachMovie
method.
>
> On the side of the screen are buttons that make this MC
move around the
> screen.
>
> These components I am trying to use are not being
rotated, just moved
> (because
> they are inside a MC that is being moved). I've tested
this and have
> determined
> that moving a component at runtime does not cause the
text to disappear -
> only
> rotating it does.
>
> If you need it, I have uploaded the
>
http://www.dwbgallery.com/stuff/gamepal/tcg68c.zip
> Just
> run it and you'll see the component - with no text
displaying. The rows
> should
> be labeled "1" "2" and "3".
>
> If you get this far (downloading and looking at the
source fla) I will go
> the
> distance here and point you directly to where this
object is located.
> Simply
> open the fla's library and double click on the
>
searchAreaContent
> movieclip inside the
search panel
folder. You will find the
> component in there. Thanks in advance for any help!
>

Baseline date in payment terms_reply the question for FI experts

Hy guys,
my problem is this: in payment terms I should want that the baseline date is the date of good receipts instead of the date of invoice receipt and this thing should happen only for a particular society.
In your opinion is it possible to make this ?
I have already made the same question to the MM experts but it seems to be more a FI problem and so I also ask you if perhaps there is a user exit that permit to me to make this.
Thanks in advance for kindness and effort,bye
Maximilian

Hello,
Baseline date is the date from which SAP calculates the due date.
You can configure the terms of payment in transaction code OBB8. Within terms of payment you are required to maintain baseline date.
You can select either one of these:
1) Posting Date: Posting Date of the invoice
2) Document Date: Document date of the invoice
3) Entry Date: Nothing but current date of the entry
4) No Default: In the case of no. default, the system will not propose any base line date, however, the user is forced to enter the base line date.
In case of 1, 2 and 3 the system proposes the baseline date, however, the user will have the privilege to change at the time of posting.
You do not have any other options for baseline date, except the these four date options.
Please let me know if you need further details.
Thanks,
Ravi

Very Urgent for AR module XMLP templates

Hi,
I am very new to XMLP reports and now i need to work on customer statement and AR invoice reports.
my client expecting layout for approval.so i need to design layout mapping with xml source code.
pls any of u have layouts and xml source code for the above 2 reports.
its very urgent
i am using xmlp 5.6.2 and oracle apps 11.5.10
Please help immediately and it will be very greathelp from ur side.
Regards
RAMSIVA

Hi
was anyone able to provide a layout for the ar customer statement, i just started working on this for a client.

Urgent For Desginer Experts

Similar Messages

Maybe you are looking for