Urgent! FRM-10270 Cannot attach the library
I get the error message "FRM: 10270 Cannot attach the library SYSLIB while opening menu BMENU" but only when i try to open a second form while the first form is still running.
Both forms are working fine as long as they are not running at the same time.
It seems like the second form opening does not have access to the FORMS60_PATH.
All the forms and libraries (plx) are in the FORMS60_PATH.
I am running developer_6i forms & reports on a HPUX 11i with patch 11 and I am trying to access them through jinitiator 1.3.1.9 on a XP machine.
I would apprecate if anybody have any ideas about this error.
BR/Marcus
Thanks a lot for the tip. I used truss and realised that it found the library but was not allowed to open it. The kernel parameter maxfiles was set to low.
I increased it and everything works ok
BR
Marcus
Similar Messages
-
FRM: 10270 Cannot attach the library when two forms run at the same time
I get the error message FRM: 10270 Cannot attach the library SYSLIB while opening menu BMENU but only when i try to open a second form while the first form is still running.
Both forms are working fine as long as they ar not running at the same time.
It seems like the second form opening does not have access to the FORMS60_PATH, because you can not open a third form because it can't find it.
All the forms anf libraries (plx)is in the FORMS60_PATH.
I am running developer_6i forms & reports on a HPUX 11i machine and I am trying to access them through jinitiator 1.3.1.9 on a XP machine.
Best regards
MackeThanks a lot for the tip. I used truss and realised that it found the library but was not allowed to open it. The kernel parameter maxfiles was set to low.
I increased it and everything works ok
BR
Marcus -
FRM 40034: cannot attach the library file
I got this message when try to run the DEVELOPER 2000 demo program after installed it on a NTserver,how can i solve this problem?
thanks
nullHi,
You have to change your Windows registry.
When you open a FMB file Forms looks in the registry in HKEY_LOCAL_MACHINE; SOFTWARE; ORACLE -> FORMS(version)_PATH. In that key you have to set the sub-directory where the pll-file is located.
Then open Forms again and it should be solved.
null -
WEBUTIL-URGENT FRM:40039 Cannot attach library WEBUTIL while opening form x
Hi,
I 'm working with 9iAS R2 on Linux.
I'm testing the webutil by using a my test form.
Give that in OS Windows 2000 the test form works fine.
On Linux, I compile the form without problem, but when I run the form on web I have this error :
FRM-400039 : Cannot attach library webutil while opening form TEST_FORM
The Java console displaied this :
JInitiator: Versione 1.3.1.8
Uso della versione JRE 1.3.1.8 Java HotSpot(TM) Client VM
Directory principale utente = D:\Documents and Settings\contug
Configurazione proxy: Configurazione automatica proxy
JAR cache enabled
Location: D:\Documents and Settings\contug\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console windo
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://f92ias.inarcassa.it:7777/forms90/webutil/webutil.jar from JAR cache
Loading http://f92ias.inarcassa.it:7777/forms90/webutil/jacob.jar from JAR cache
Loading http://f92ias.inarcassa.it:7777/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
connectMode=HTTP, native.
Versione Applet Forms: 90270
I don't seem that nothing of unusual.
Could You say me somethig ??
Regards
GiordanoHi Duncan,
How Do I do recompile the pll on Linux?? The environment development doesn't exist on Linux !!
I open my form in environment development on Win 2000, after I attach the pll without the path and save all.
After I move all on linux and compile the form useing 'f90genm.sh'. Until this step I don't have problem, the form compiled fine, but
when I running it, I show the error message FRM-40039 .......
Do I mistake something ???
I working on DB ver 7.0.2 and I can't produce the file PLX
Regards
Giordano -
URGENT,FRM-41337: Cannot populat the list from record group
Hi all:
Can anyone help me in that problem?
I have a database item in the block as a list item with combo box style and I use this code in WHEN-NEW-RECORD-INSTANCE at the form module level to populate that combo box list:
DECLARE
group_id RECORDGROUP := FIND_GROUP('group');
list_id ITEM := FIND_ITEM('employees.job_id');
x number;
BEGIN
IF NOT ID_NULL (group_id) THEN
DELETE_GROUP (group_id);
END IF;
group_id := CREATE_GROUP_FROM_QUERY ('group','select name,TO_CHAR(id) job from cmn_jobs where job_type_id = 4720 ');
x := POPULATE_GROUP (group_id);
POPULATE_LIST (list_id, group_id);
EXCEPTION
WHEN NO_DATA_FOUND THEN
null;
END;
That code worked very well and without any problem, but when I change the list item from combo box style to poplist style then the forms give that error:
FRM-41337: Cannot populat the list from record group
And an additional null/blanke element appears in the poplist with original element that come from RECORDGROUP.
So can anyone help me to solve that problem please?First, how I can assign a default or initial value DYNAMICALLY to my poplist.Set the default-value to a parameter like :PARAMETER.MYPARAMETER then you can assign the desired default-value to the parameter.
second, if I have popliste say X for example depend on another poplist say Y ,so when I put the code to populate popliste X on WHEN-LIST-CHANGED on popliste Y and make query then the >forms return FRM-40301 Query caused no records to be retrieved ,but when I have a copy for that code in WHEN-LIST-CHANGED and put it in WHEN-NEW-FORM-INSTANCE at the form >module the form work and returns records, so is it any error or exception in what I did.Can't answer that, you should check :SYSTEM.LAST_QUERY to see why the query does not returnany records.
At the last, which better to put the code for popliste in PRE-FORM trigger at the form module or in WHEN-NEW-FORM-INSTANCE at the form module.I would use the PRE-FORM-trigger -
FRM-40039 cannot attach the libray C:\ORA902\forms90\webutil
I have this mistake, when try to run my forms, I compile de forms is OK. This forms try user the library Webutil, is the first time I try use.
I use the forms version 9.0.2.10. and webutil version 1.0.6.
I use the manual Oracle Forms Developer Webutil Users Guide Release 1.0.6 for configuration the webutil
I dont know was wrong.
Thanks for all.
Manolowhere we will get the plxopen the pll in Forms-builder, then use Porgam->Compile module (Strg+T)
plz mention clearly in which path we have to copy that file.There is a config-file named default.env (located in $ORACLE_HOME\forms\server), it contains a settings named FORMS_PATH. Either put your plx (and all of your fmx) in one of the directories listed there, or add a new directory to the list where you have placed your files in. -
FRM-10102: Cannot attach PL/SQL Library menu_library
Dear All:
I am using Developer 6i Version 6.0.8.23.2 (32 Bit)
I am facing following error while opening a form in Forum Builder.
FRM-10102: Cannot attach PL/SQL Library menu_library. This library attachment will be lost if the module is save.
I know that I have to add the address of the folder in which the library is located, but I forgot the Registry Key value and location.
Anyone can help me?
Thanks
HassanYes, I understand that I need to set the FORMS90_PATH in default.env file.
My question is how do I say "Pick up the library from the same directory as the form fmx".
Do I have to say it like
"FORMS90_PATH = C:\MyDir\Forms;" ?
I was a hesitant to hardcode the directory name( as above) in the default.env file, because incase I change the the library plx directory, I will have to update the envoirnment file again.
So is there any other way to do it ? -
WebUtil Demo Runtime Error FRM-40039: Cannot attach library webutil
I download the WebUtil Demo from
http://www.oracle.com/technology/products/forms/htdocs/webutil/Webutil_demo.zip
I follow the instruction given in the file ReadMe.html
I am using Oracle Developer Suite 10g Release 2.
There is no compilation error.
I started OC4J Instance
The following error appears:
FRM-40039: Cannot attach library webutil while opening form WU_TEST_106
Help!I try to compile the WEBUTIL.pll but with comilation error.
I run FOrms Builder 10g Release 2
Click on File, Open
Select the file WEBUTIL.pll
Click on Program, Compile Module
but showing error
Compilation errors on WEBUTIL_DB_LOCAL:
PL/SQL ERROR 201 at line 9, column 12
identifier 'WEBUTIL_DB.OPENBLOB' must be declared
PL/SQL ERROR 0 at line 9, column 5
Statement ignored
PL/SQL ERROR 201 at line 18, column 12
identifier 'WEBUTIL_DB.CLOSEBLOB' must be declared
PL/SQL ERROR 0 at line 18, column 5
Statement ignored
PL/SQL ERROR 201 at line 24, column 5
identifier 'WEBUTIL_DB.WRITEDATA' must be declared
PL/SQL ERROR 0 at line 24, column 5
Statement ignored
PL/SQL ERROR 201 at line 29, column 12
identifier 'WEBUTIL_DB.READDATA' must be declared
PL/SQL ERROR 0 at line 29, column 5
Statement ignored
PL/SQL ERROR 201 at line 35, column 12
identifier 'WEBUTIL_DB.GETLASTERROR' must be declared
PL/SQL ERROR 0 at line 35, column 5
Statement ignored
PL/SQL ERROR 201 at line 40, column 12
identifier 'WEBUTIL_DB.GETSOURCELENGTH' must be declared
PL/SQL ERROR 0 at line 40, column 5
Statement ignored
PL/SQL ERROR 201 at line 45, column 12
identifier 'WEBUTIL_DB.GETSOURCECHUNKS' must be declared
PL/SQL ERROR 0 at line 45, column 5
Statement ignored
Failed to generate library.
HELP! -
Webutil -frm-40039 cannot attach library
hi,
I have copied the web util demo from otn [http://www.oracle.com/technology/products/forms/htdocs/webutil/webutil.htm], and i tried to install it as per the instruction given over there .While compling it has not give any error but while running the form before opening the form it gives the following error FRM-40039 : cannot attach library /oracle/devsuite/forms/webutil while opening the from wu_test_106.
note - i have attached the webutil.pll at attach library.where we will get the plxopen the pll in Forms-builder, then use Porgam->Compile module (Strg+T)
plz mention clearly in which path we have to copy that file.There is a config-file named default.env (located in $ORACLE_HOME\forms\server), it contains a settings named FORMS_PATH. Either put your plx (and all of your fmx) in one of the directories listed there, or add a new directory to the list where you have placed your files in. -
FRM-40039: Cannot attach library d2kwutil while opening form xyz
Hi,
I am running forms 6i.
I copied the folder containing all executables (.fmx, .mmx, .plx) to my local directory 'C:\bin6'.
When i call this from Command Line
c:\orant\bin\ifrun60.exe C:\bin6\xyz.fmx
I get the error "FRM-40039: Cannot attach library d2kwutil while opening form xyz"
I verified that d2kwutil.plx is present in c:\bin6.
Note: I did not change anything in the FORMS60_Path in registry to point to my local directory.
Please helpHi Smita
Pls answer urself the following questions and check...
1. did u attached the liberary to ur form...?
2. did u set the FORMS60_Path in the registery for the liberary...?
3.did u try a Ctrl-Shft-K (Compile All) then a Ctrl-T (Generate) and a save, then run your form... ?
4. did u check the path in the START IN property to the correct location.. .?if the answer is yes then pls try to do the following...
1. copy d2kwut60.dll + .PLL to client machine C:\orant\TOOLS\OPEN2K60\plsqllib
2. copy the required .FMX file to client pc.
Hope this helps... :)
Regards,
Abdetu... -
FRM-40039 cannot attach library ofgbsl while opening ccw2031
I got the above error when I try to run the program ccw2031 on the ie browser. First of all there are 3 files attached in my 4.5 forms. These libraries are the following; OFG4BSL.pll, OFG4mnl.pll, OFG4tel.pll. Upgrading it to 10g for windows had no problems since there is a corresponding libraries namely OFGBSL.pll, OFGMNL.pll OFGTEL.pll and OFGMES.pll.
My program compiled with no errors when i tried attaching those 4 files in my Developer Suite 10g for unix.
The problem came out when I tried to run it using the Application Server.
And when I try accessing the program again in the forms developer i got the following messages:
FRM-10102: Cannot attach PL/SQL library OFGBSL. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library OFGMES. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library OFGMNL. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library OFGTEL. This library attachment will be lost if the module is saved.
Questions: 1. Are there any libraries equivalent to these 4 files in UNIX?
2. Can I use the windows version and compile using frmcmp? Actually i tried this already but did not work.
3. How do I configure the Developer Suite 10g for Unix to be able to attach the libraries mentioned if it works?
Can Anybody help me.....Please.
Edited by: user7493752 on Jan 30, 2009 12:17 AMFirst, you don't need to replace the pll's with the 4 in the middle (e.g. OFG4BSL) by the ones without the 4 in the middle and i wouldn't do it. The libraries belong to different versions of the forms-generator from oracle-designer (the *4*-ones form Designer 2000 generating forms 4.5, the ones without the *4* starting with version 6i). But both versions are "pure" pll's, so they can easily migrated to 10g.
FRM-10102: Cannot attach PL/SQL library OFGBSL. This library attachment will be lost if the module is saved.Your problems can be based on one of the following:
The pll's are not in the working-directory of your forms-environment, if any.
The pll's are not in one of the directories defined in the env-setting FORMS_PATH.
You attached the pll's to your forms with the whole path (not preferable) and now forms doesn't find that path in your application-server-environment.
Library-names are Case-sensitive, so if you attach MYLIB, the filename must not be mylib.pll but MYLIB.pll.
hope this helps. -
Frm-40039 Cannot attach library
I have Oracle 10g and Developer Suite.
When I attach a Library, webutil.pll.
I can run it in forms developer,
but when I try to run in in the runtime, I get the ERROR frm-40039 Cannot attach library.
Why?Have you compiled the pll and placed the plx in a place on the runtime server where Forms will find it (added the directory where the PLX is to the env variable FORMS_PATH)?
-
FRM-40039: Cannot attach library webutil while opining form
I have installed webutil in Windows 2000 in order to perform some features.
When I run my forms from Forms Builder this message appear
FRM-40039: Cannot attach library webutil while opining form.
I don't know what is wrong. I have set the virtuals path, like this:
For an Oracle Developer Suite installation, add the following line to the file
j2ee/DevSuite/application-deployments/forms/forms90web/orion-web
.xml under the Oracle Developer Suite Oracle Home:
(The following assumes that you have installed WebUtil into a directory c:\webutil)
<virtual-directory virtual-path="/webutil"
real-path="c:/webutil/lib" />
On a OracleAS install, define the same virtual directory in the forms90/server/forms90.conf file:
AliasMatch ^/forms90/webutil/(..*) "c:/webutil/lib/$1"
I need some help!!You need to include the location of the pll into the FORMS90_PATH that is defined in your environment file - e.g. default.env
-
Frm-40039 cannot attach library on unix
i've a webutil-form which runs successful on windows.
compiling it on tru64 gives no errors. when calling it i get frm-40039 cannot attach library. the next error is frm-92100 your connection to the server was interrupted.
the console shows no errors. webutil.jar and jacob.jar are loaded correctly.
what else could be the reason for this errors? non-webutil-forms work fine on tru64. and the webutil-form works fine on windows. compiling this on unix gives no errors.
?????christian:
where could i make this error?
on windows i attach the library by selecting it from a list, and not by writing the name of 'webutil.pll'. on unix, the only thing i do is recompile the form. webutil.pll was transfered wia ftp. so there were no name-conversion or something like this.
so, i don't know where i could make the mistake you described.
i'm not sure if i compile the forms correct.
i transfer the working (on windows) form and webutil.pll to unix via ftp.
then recompile it using bin/f90genm.
here i check 'compile all pl/sql code' and 'strip pl/sql source from library'
the fmx is created with no errors.
any other ideas? -
FRM-40039 Cannot attach library in Forms9i
I have an app that works in 6i that was recompiled in 9i and deployed to a server. The 9i app works locally (connecting to a db not on my machine), but will not work on the server. When I run on the server I get the error 'FRM-40039 Cannot attach library XXX while opening form YYY'. I have the same folder configuration on the server that I do on my laptop. I copied the libraries from their 'normal' location to OracleHome\bin, but I still get the error. I removed one of the libraries attached to the form, and received the error on the second library. The libraries are in the form without a path (just the library name). Can anyone help me? I need to go to QA in 2 days!!! Help!
Thanks -- Jean.Couple of things to watch for. PLLs are looked for on the FORMS90_PATH - this is set up in the default.env file when you are running. So make sure the path is set correctly.
Also remember that if you are moving to Unix from Windows, Unix is case sensitive so
myFile.pll is not the same as MYFILE.PLL
Hope this helps.
Regards
Grant Ronald
Forms Product Management
Maybe you are looking for
-
Changed Outlook Contact Form back to IPM.Contact - now I can't save contact in Public Folder
I recently changed the Contact form that we were using back to the default IPM.Contact. I did this so that it would be consistent for only a few of us had a custom contact template to use and it made it difficult to share contact information. After
-
Error while converting Speech to Text
When Iam trying to createRecognizer by using Central class, recongnizer is become null. This is the code what I am trying to do :- RecognizerModeDesc desc = new RecognizerModeDesc(Locale.ENGLISH, Boolean.TRUE); rec = Central.createRecognizer(desc); A
-
Printing error message when trying to print an email from Outlook 2010
I am having an issue with a client machine. The user is using windows 7 pro and office 2010 pro. This issue i am having is when you go to open an email that you need to print i get the following error "the item could not be found". It does not mak
-
UPGRADE Panther or Tiger on Imac DV 400?
I am trying to determine which OS would be the better choice for my computer. I have been running 10.2.8 for a few years, but I just bought photoshop elements 4 and now I see I need 10.3 or better. I can use the educator discount from Apple for Tiger
-
How do I print a Numbers document? All I get is the heading!
How do I print a Numbers document on my Mac? All I get is the heading!