URGENT: Giving error message when not using variant

Hi Gurus,
While trying to execute t-code S_ALR_87012357 (Advance return for tax on sales/purchases) with variant, the report is coming fine.
But, if I use the same T-Code without any variant, even if the same data which the variant is having, it gives message "No list generated"
Can you please give some light on this.
Thanks in advance,
Manish

This report has several input fields, most of them under collapsed folder like plus icons.
You have to reconcile between the input parameters stored in that variant to what you are entering manually.

Similar Messages

Giving error message when saving the Query

Hello,
I have added a new calculated key figure to the structure in a Query but when I try to save the Query it is giving error message is below.
Error Message:
u201CThis internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572u201D.
Could any one please suggest me how can I over come with this problem.
Thanks
Prathap.

Hi Prathap,
There is some problem in the definition of the Query.
Please click on the check button before saving the query, it gives where the problem exists in it.
Hope it helps.
Veeerendra.

A10-70 giving error message when trying to use flash drive

I have a 32 gb USB flash drive I am trying to use. All I get is an error message: damaged external usb storage
Is it b/c the flash drive is too large or something weird? Don't know what to do.
Solved!
Go to Solution.

Reformat your flash drive to FAT32 format. Plug it to the system and check. To reformat your flash drive, follow below steps:
1. Right click on the flash drive icon and select Format
2. Under Format window, select FAT32 under File system and click on Start.
Note: Reformatting your flash drive will erase all your data.

BAPI_GOODSMVT_CREATE error messages, when I use Movement Type '541'

Hello,
I am using "BAPI_GOODSMVT_CREATE".It was working fine when i was creating a GR against Purchase Order.
Now i am trying to create GR against subcontracting purchase order
but it is giving Error "No goods receipt possible for purchase order"
The following is my soucre code:
GT_CODE-GM_CODE = '04'.
GT_HEADER-PSTNG_DATE = SY-DATUM.
GT_HEADER-DOC_DATE   = SY-DATUM.
GT_ITEM-PLANT      = 'p001'.
GT_ITEM-STGE_LOC   = 'w03'.
GT_ITEM-MOVE_TYPE = '541'.
GT_ITEM-STCK_TYPE = SPACE.
GT_ITEM-ENTRY_QNT = '10'.
GT_ITEM-PO_NUMBER = '4500000188'.
GT_ITEM-PO_ITEM    = '00010'.
GT_ITEM-MVT_IND    = 'B'.
   APPEND GT_ITEM.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      GOODSMVT_HEADER       = GT_HEADER
      GOODSMVT_CODE         = GT_CODE
     IMPORTING
        GOODSMVT_HEADRET    = GT_HEAD_RET
      TABLES
      GOODSMVT_ITEM         = GT_ITEM
    GOODSMVT_SERIALNUMBER = GT_SNO
      RETURN                = GT_RETURN.
COMMIT WORK.
Pls help me out...
thanks
Regards,
Samuel Liu

Hi jxlmh,
1. No goods receipt possible for purchase order"
This is not a program error.
2. Its a functional message / error.
3. Please contact the functional guy.
4. Also try to manually enter the same data
   via migo transaction.
(at this point, also, it will give the same error)
regards,
amit m.

Form Captcha Issues - Error message when not filled vs. traditional "Please fill in the following:"

Just discovered an issue regarding a form using a CAPTCHA.
When I formerly submitted other forms on sites with CAPTCHA's in the forms I created, when one did not fill out the form, a pop-up window would appear allerting the customer to "Fill in the form field" that were required, including an allert to "Enter Word Verification in box below."
I have created a new form for a new site and seem to be encountering a different issue. When the form is not filled out and the user clicks "Submit" a new page loads with a red error message saying: "ERROR: An error occurred. Image verification failed. If you believe this is incorrect, please contact your system administrator or go back and re-submit the form."
How can I correct this to simply have the same required field pop-up window appear like was happening with former developed forms?? Not sure why this form is doing this when all prior forms with CAPTHCA included were just fine. Haven't done anything different to the form that I hadn't to others in the past....Please Help!! Thanks.

Thank you for posting.
Please provide us the page URL where you have placed the form and we'll further investigate this issue. You can also contact support directly by creating a ticket or via chat.
Thanks,
Aishvarya Raj Rastogi

VMM2012 SP1 console giving error message when trying to assign logical networks

Hello,
we are encountering the following Situation.
I have a new Hyper-V Cluster (2012) with at that time two nodes.
When I try to configure the Logical Network connectivity on a virtual Switch (Preparing the use of multiple VLANs) it works on one of the nodes but on the other one we are getting the following error message:
Virtual Machine Manager
VMM is unable to process one of the provided parameters for the cmdlet (Set-SCVMHostNetworkAdapter):
Cannot convert 'System.Object[]' to the type 'Microsoft.SystemCenter.VirtualMachineManager.HostNetworkAdapter' required by parameter 'VMHostNetworkAdapter'. Specified method is not supported.
ID: 12416
Does anyone has an idea what I am missing here?
Thank you
Sascha

Could it be possible that your network adapter does not support VLAN tagging?
I've run into this issue in my lab using consumer oriented NICs and trying to VLAN networking. A good test would be to do the following:
Go to Hyper-V Manager
Create a Virtual Switch and set it to a VLAN.
Do you get an error message? If so, your NIC (or NIC driver) does not support VLAN tagging. If not, then you are fine and you have a problem with VMM somewhere.
This issue can also occur due to bad drivers on a NIC card as well. However, for troubleshooting purposes, you will want to go down to the lowest level (Hyper-V Manager) to make sure that this isn't a Hyper-V issue and really is a VMM issue.
Hope this helps!
-Bill

"out of memory error" message when not out of memory

I've gotten this message before (as have others) when I'm clearly not out of memory. It's been about a year since this happened last, and I can't remember how I solved it. It seems many others have had this problem and that there has been no simple solution. It occured when I was trying to revise some titles over an imported .mov image which was downloaded from the internet. I revised the titles, but they wouldn't render. Then I got the "out of memory" error message. So far I have:
1) Logged out and logged back in
2) Rebooted
3) Pasted my sequence into a new sequence
4) Saved the project as a new project
None of these things have worked. Of course this all happens when I'm at the very end of the project with a deadline of tomorrow.

I'm having the same problem. I searched "out of memory" and found this solution on another thread..
http://discussions.apple.com/thread.jspa?messageID=1162802&#1162802
However, it didn't help me and I am still looking for an answer. I am running FCP HD 4.5 and Avid Express Pro. I edidted together an 18 min video w music, no effects and exported it as a reference movie. Imported to FCP to add chapter markers and that's when I get the "General Error Out of Memory" Tried the make clip offline thing, but that didn't work. Tried exporting a different video from Avid, 3 min and that worked (with chapter marks).
Anyway, I feel your pain. If you find a solution, please mark this thread "question answered"
Thanks
Quicksilver 867 Mac OS X (10.3.9) 1.12 GB SDRAM, 80 gig + 160 gig

Error messages when I use "Save As..."

I've discovered that a number of JPEG images that I created today, with CS2 for Mac, have been cited as error files by my back-up software (LaCie's SilverKeeper v.2.0.2). Not all of today's image image creations were cite as errors.
I created 12 JPEG files. Four were cited, as you'll see on the first screen shot from SilverKeeper.
One of the four so-called "err = -5000" files is titled "movingToTrinity_lg.jpg" (the second screen shot).
Finally, the third screen shot (of "giraffe.jpg") is one that wasn't cited as an error file.
The difference between the second and third screen shots is that the so-called error files were made when I chose the "Save As..." selection. The error-free image was made when I chose the "Save for Web..." option.
Is there something that I should or shouldn't do when using the "Save As..." option?
Thanks, in advance.

Hello, again, Chris:
<Short version: Photoshop and SaveForWeb are not involved in this problem at all.>
That's great to know.
<The error messgae indicates a problem with file sharing, so yes, there could be a bad setting somewhere.
But most likely this is a problem in the OS or your SilverKeeper software.>
Okay, here's what I can tell you so far.
1. I've been in communication with SilverKeeper. The technician assured me that SilverKeeper was not at fault. H suspected that there was an OS problem somewhere but couldn't suggest how to diagnose it. I did an Apple Hardware Test (using my OS 10.4.11 install disk) and there was no problem detected. Beyond that, I don't know if there's something wrong with the OS (or the disk itself). Is there a way to test the install disk(s)?
2. I've checked my Sharing preference. I opened the Services, Firewall, and Internet tabs to see if I'd selected any buttons. None are selected. Is there something else I should do to control file sharing?
Chris: I know that you're an Adobe employee. I'll understand if you cannot suggest further steps that I can take to resolve this menacing problem. If you can help me further, I'll be most appreciative.
TIA,

Error Message when I use Flash websit

I am on XP and have Flash 8 installed. Yet as I rollover
navigation on site I see this box come up:
Click to Activate and Use this control or Press Spacebar to
activate and use this control.
In some case a black ouline goes around an entire map or nav
bar along with this message. Once I click all is fine, but I want
to avoid this. Can you tell me how?
THANK YOU.

This is the result of a recent MS Explorer browser update.
There are some work arounds and a Adobe Flash update that may help.
However, I just spent the better part of today working out what
works for me and I can resommend you visit:
http://blog.deconcept.com/flashobject/
where there is an excellent sample file you can adapt to your HTML
pages (no need to alter your Flash files).

Error Message: could not use the quick selection because of a program error

Anybody know why this is happening since the latest CC update? Or how to work-around?

Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Error Message when Using Red Eye Tool

I am sure there is something very obvious I am missing here, but when trying to use the red eye correction tool, I get the following error message:
"Could not use the red eye removal tool because the target channels do not cover the composite."
What does this mean and how can I get the tool to work for me? I am using Photoshop CS4.
Thanks!

Sounds like you targeted a single channel, or were in quick mask mode.
Target the RGB channels, or turn off quickmask.

BPE_ADAPTER MESSAGE_NOT_USED Message is not used by any processes

We need some help on BPM flow. We are at it for last 3 days without much progress. We are able to make sync call to same BAPIs and get data without any issue. However, with BPM we have this issue
I am creating the simplest integration scenario as
1.       HTML/HTTP-->BPM (Async)
2.       BPM-->R/3 (Sync)
3.       BPM-->File (Async)
Created all required interfaces and mapping. I have some dummy mapping for first 2 cases. I am able to activate the integration scenario and Integration Process without any error. I am able to import it in integration directory successfully without any error. When I am executing the first async request from HTML client I am invariably end up with an error from sxmb_moni as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is not used by any processes</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The BPM is not getting invoked. Looking at the trace it shows that there is an error after creating BPE proxy for message as
<Trace level="3" type="T">created BPE proxy for message DE5FB5802F33D3F19373005056A12466</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
What I have checked so far:
1.    I have checked that the developer key is assigned to my user id
2.    Used SWF_XI_CUSTOMIZING to make sure that all the process are green
3.    Used sxi_cache to make sure that the BPM process has return code 0 and also reactivated it numerous times. Also checked activation log and no error there
4.    Used SXMP_ADM_BPEAutomatic BPM Customizing to check all the entries are green
5. There are not any message in sxmb_moni_bpe for my interface shows no message
Input call has:
1.    Sender Service: MFG_BPM_BusinessSystem
2.    Sender Interface: MI_Outbound_Async
3.    Quality Of Service: EO
4.    Sender Name space: Name space
5.    Input XML:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:BAPI_SALESORDER_GETLIST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
   <CUSTOMER_NUMBER>0000001000</CUSTOMER_NUMBER>
   <DOCUMENT_DATE/>
   <DOCUMENT_DATE_TO/>
   <MATERIAL/>
   <MATERIAL_EVG>
      <MATERIAL_EXT/>
      <MATERIAL_VERS/>
      <MATERIAL_GUID/>
   </MATERIAL_EVG>
   <PURCHASE_ORDER/>
   <PURCHASE_ORDER_NUMBER/>
   <SALES_ORGANIZATION>1000</SALES_ORGANIZATION>
   <TRANSACTION_GROUP/>
   <SALES_ORDERS>
      <item>
      </item>
   </SALES_ORDERS>
</ns0:BAPI_SALESORDER_GETLIST>
Any clue, help pointer will be of great help. Just beats me, what is wrong!!
Version:
SAP R/3 ECC 6.0
XI 7.0

Hi,
Please check these threads where they have the same issue:
Message is not used by any processes
Error: Message is not used by any processes
Error: BPE_ADAPTER Message not used in any process
Message is not used by any processes
---Satish

Error message on iPad using safari and iMessage/ FaceTime.

I'm having trouble with my iPad (3). Just recently I keep getting the same error message when searching using safari, it says cannot open page as too many redirects occurred. I've tried closing all tabs, clearing the history and clearing cookies and data but nothing is working. I can still use google and use my Facebook and Twitter apps. Also since clearing data, I have been logged out of iMessage and FaceTime, when I try and log back in again it says that an error occurred during activation. What's wrong with my iPad?! I updated my iOS software a few weeks ago so I assumed that couldn't be the problem. Please help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

F-04: give error message when clearing AP items with payment block key(R)

Hi all,
Customer wants to prevent payment for AP items with payment block key(BSEG-ZLSPR) .
I want system giving error message when doing payment clearning with t-code:F-04.
How can I realize it ?
Thanks Grus!
Lynn

Please configure the following nodes properly:
Financial Accounting>>Accounts Receivable and Accounts Payable>>Business Transactions>>Outgoing Payments Global Settings>>Payment Block Reasons>>Define Payment Block Reasons & Define Default Values for Payment Block
For the error message: You may define a validation in OB28 with the help of ABAP consultant

So, I'm getting an error message when I plug my iPhone 4 into my computer. It says, "This iPhone cannot be used because the Apple Mobile Device Service is not started."

Hello People!
I'm getting an error message when I plug my iPhone 4 into my computer. It says, "This iPhone cannot be used because the Apple Moblie Device Service has not been started." What does this mean? I've never had this error before. It's also giving the same message with my iPod touch. Please help!
Thanks,
DanaGal

You can easily check whether you've the Apple Mobile Device in your computer.
Right click 'My Computer' , then Manage => Services and Applications => Services. Apple Mobile Device is listed in alphabetical order. If none, it means you've not download iTunes into your computer yet. If yes, please ensure the Apple Mobile Device is in 'Started' status.
Good luck

URGENT: Giving error message when not using variant

Similar Messages

Maybe you are looking for