Urgent: got an error in running ds engine
i'm not sure where i can fix this error: pls help. thanks.
DSE COnnect failed due to DB Connection to Io exception: Invalid number format for port number error
io exception: Invalid number format for port number
Lulay,
The best place to post this question is the Dynamic Services Forum.
Thanks
Similar Messages
-
Got RMAN error when running RMAN backup of archivelogs on physical standby database
Got below error when running RMAN backup of datafiles and archivelogs on physical standby database.
RMAN-06820: WARNING: failed to archive current log at primary database
ORACLE error from target database:
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-00942: table or view does not exist
Could anyone help me? Thanks,Hello;
When you connect RMAN to the source database as TARGET you must specify a password even if RMAN uses operating system authentication.
So the errors ORA-17627 and ORA-00942 appear to be cause and effect.
What version of Oracle? ( 11.2.0.4 according to the tag )
Can you post your backup script?
Best Regards
mseberg
Update
According to :
Database Error Messages 11g Release 2 (11.2) E17766-03
RMAN-06820: WARNING: failed to archive current log at primary database
Cause: An attempt to switch the archived log at the primary database failed.
So I would check my Primary alert log for an issue.
Message was edited by: mseberg -
Hi, I'm trying to communicate with an instrument through TCP/IP using AK protocol. I've created a VI that works fine on my PC where I have installed Labview 2011.
When I create an executable from this VI to use it on a PC without Labview, it does not work and I receive the error 63.
Of course, I've have installed run-time engine and also VISA run-time, and I use the same configuration on the port (same ip address and port).
Moreover, the executable works also fine on my pc as well as the VI.
Have you got any suggestion?Error 63 is "LabVIEW: The network connection was refused by the server.".
Is the target machine on the same subnet as the instrument?
No routers/firewalls between the two devices?
Net nanny/web filtering/firewall turned off on the target PC?
Instrument doesn't have to be configured to allow connections from the target machine's IP?
My guess is network configuration. Try pinging the instrument's IP from the target machine, see if that goes through.
First thought was missing drivers/modules, but since you've got VISA and RTE installed, I think you're covered there. -
Error while running Simulation Engine in Windows Vista
Hi All,
I installed Demantra 7.2 in Windows Vista. Everything works fine except Simulation Engine. When I Start Simulation Engine i get the following Error
Warning failed to create engine monitor - Class not registered.
Can anyone pls help me out with this.
regards,
Niranjan.GHello Ruby,
it's the right id, but the note isn't published (anymore). Below are the details.
best regards
Geert
Goal
Q1: When attempting to start Simulation Engine, getting "WARNING Failed to create engine monitor.
HRESULT=0x8004154 - Class not registered." EngineManager continues to run until "Executing the
shell...", after which it gets another error "ERROR Could not create callback COM object!
HRESULT=0x8004154 - Class not registered."
Users attempted to uninstall/reinstall but still have the same issue. How can this be fixed
Q2: Another question is, can these components be registered on an XP SP2 machine with IE 7 (Internet Explorer Version 7)?
Solution
A1: Please review the above information from the Demantra Analytical_Engine.pdf and see if it resolves
the problem - especially the information on pg 3, 46, and 50 regarding registering the analyical engine
manually. To save time, this information is posted below:
Demantra Analytical_Engine.pdf - states the following on pg 3:
Engine Modes
The Analytical Engine can run in two modes: batch and simulation.
• In batch mode, the Analytical Engine considers all the item-location
combinations and generates a forecast for all of them (with a few exceptions,
noted in the next chapter). In a typical implementation, the engine automatically
runs in batch mode regularly, perhaps after new data is imported.
• In simulation mode, the Analytical Engine considers only a subset of the
combinations. In this mode, the engine (called the Simulation Engine) waits for
simulation requests and then processes them.
In simulation mode, a user runs a worksheet and submits a simulation request for
some or all of the combinations in it. The simulation request is processed in the
background but generally fairly soon. When the simulation is done, Demantra
Spectrum alerts the user, who can then accept or reject the results.
In this mode, the user is usually performing a “what if” analysis. That is, he or she
has made some changes within the worksheet and then performs the simulation to
see whether those changes have the desired effect.
It is also possible to run simulations programmatically from within a workflow.
The Analytical Engine can run in only one mode at a time.
Demantra Analytical_Engine.pdf - states the following on pg 46:
Registering the Analytical Engine
The installer registers the Analytical Engine for you, but in case of problems, you can
register the engine manually. To do so, run the batch file Demantra_root/Demand
Planner/Analytical Engines/bin\RegEngine.bat.
If you have a license for the Distributed Engine, you can run the engine on multiple
machines. You do not need to install it on every machine; you need only to register it
on them. These machines must also be running the appropriate database client
software, so that they can communicate with the Demantra Spectrum database.
For information on choosing the machines to run the engine, see “Choosing Machines
to Run the Engine” on page 50.
Demantra Analytical_Engine.pdf - states the following on pg 50:
Choosing Machines to Run the Engine
If you have a license for the Distributed Engine, you can run the engine on multiple
machines; see “Registering the Analytical Engine” on page 46. If you do not have a
license for the Distributed Engine, Demantra Spectrum runs the Analytical Engine on
only one machine.
To choose the machines to run the engine
1. Click the button next to the Selected computers field, shown here.
The Engine Administrator displays the following screen - screen shot cannot be pasted in ITS
The left list shows the machines on which the Analytical Engine has been
installed. The right list shows the machines where the Analytical Engine will run.
2. Click the arrow buttons to move machine names to and from the right list.
3. Click OK.
A2: The Installation_Guide.pdf on pg 1 - 2 states that browsers should be Internet Explorer Version 5.5 or higher. But if version 7 does not appear to work properly for registering purposes, then use IE 6 -
Urgent...Error while running a jsp report in Jdeveloper
Hi,
I am getting following error while running a jsp report from Jdeveloper. I am using version 10.1.2.1.0. The same report is working fine when I am running it from report builder. ( Both these tools were installed using Oracle Developer Suite 10g version 10.1.2). I did search in oracle discussion forums and google, but I could not arrive at a resolution of error. Any help in resolving this issue would be grateful.
Error details:
Page url : http://<hostipaddress>:8988/Reports-reportproject-context-root/MyReport.jsp
Reports Error Page
Wed Oct 17 20:03:22 IST 2007
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:464)
at MyReport.jspService(MyReport.jsp:4)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:57)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Could anyone help me out in resolving this issue.
Thanks
Siva...Hi,
I posted this message in jdeveloper forum yesterday, but there was no response. So I thought of posting it in this forum to check my luck.
Thanks
Siva... -
URGENT!! Error While Running Tutorial Test Page.
Hi,
We have been facing an issue while setting up the JDeveloper and running the test page.
ERROR IS:
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND-INVALID APPLICATION. Tokens: APPL = fnd; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1142)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1794)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
at OA.jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND-INVALID APPLICATION. Tokens: APPL = fnd; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:3931)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:786)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
at OA.jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND-INVALID APPLICATION. Tokens: APPL = fnd; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:3931)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:786)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
at OA.jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
=============================================================
=============================================================
The msgs that are coming up in the embedded oc4j log is:
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\JDEV\jdevbin\jdk1.4.2\bin\javaw.exe -client -classpath C:\JDEV\jdevbin\j2ee\home\oc4j.jar;C:\JDEV\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\JDEV\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\JDEV\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Dhttp.proxyHost=proxy.mtn.co.za -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=196.13.231.*|webmail.mtn.co.za|autodiscover.mtn.co.za|10.204.5.2|10.204.5.1|*.thecomputerpeople.co.za|virtual.thecomputerpeople.co.za|oms.thecomputerpeople.co.za|*.rentamobile.co.za|*.rentatomtom.co.za|*.mobilesolutions.co.za|*.yelloworld.co.za|*.yellostg.co.za|*.yellodev.co.za|10.217.200.91|eprowebserver.mtn.co.za|10.217.205.64|*.mtn.com|196.11.240.*|196.13.230.*|*.mtnactive.co.za|*.yellomtn.com|*.yellomtn.co.za|*.mtn.co.za -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config C:\JDEV\jdevhome\jdev\system9.0.3.5.1312\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 1484 ms.
Auto-deploying OA Framework web application deployment descriptor (New server version detected)...
Oracle9iAS (9.0.3.1.0) Containers for J2EE initialized
Tutalii: C:\JDEV\jdevbin\jdev\appslibrt\iasjoc.zip archive
ICX DIAGNOSTIC: FND_TOP = C:\JDEV\jdevhome\jdev\dbc_files\
ICX DIAGNOSTIC: application_id = 601
ICX DIAGNOSTIC: responsibility_id = 24742
ICX DIAGNOSTIC: security_group_id = 0
ICX DIAGNOSTIC: mEncryptedSessionID = VOJ1vU0LWyvpCvPMgp0CPqNg:S
ICX DIAGNOSTIC: mSessionID = 1874125765
ICX DIAGNOSTIC: mTransactionID = 1962477773
==========================================================
==========================================================
We have setup the same JDEV patch on 2 machines having the same DBC files and the same application logins as well as the same responsibility keys.
But it is working fine on one machine and we are able to run the test page as well as any custom page that we are developing.
but on one machine we are unable to run even the test page.
Both are also on the same network.
We are struck as we are unable to do any work.
Could anyone please suggest any solution to this.
I have gone through the numerous posts regarding this kind of error, but have not been yet able to resolve.
ThanksAs per error message, the problem is with the Database connection.
Check again if your using wright dbc file, you can check it through connection string given in the dbc file
and also try connecting the database through sql developer.
--prasanna -
PLEASE HELP! Anyone got this error when running Parallels and Win XP
Hey ALL -I know I know why are you running windows on a MAC --well I still have some programs that I need to work with on Windows but anyway I am getting this weird error message when Windows starts under Parallels:
[C] MAC Windows
Timed out waiting for the file system to initialize. The Volume has been ejected. You can use the
init_timeout mount option to wait longer.
what is this error message -I cant figure it out
thanks
MattSince Parallels is not an Apple product, you'll probably be better off posting your question in the Parallels forums:
http://forums.parallels.com -
Error While Running the report in oracle apps
Hi All,
I got an error while running the report.The error is
"FDPSTP failed due to ORA-06510: PL/SQL: unhandled user-defined exception".
Please anyone give ur idea to resolve this issue as it is urgent.
Thnaks
SuryaHi;
I got an error while running the report.The error is
"FDPSTP failed due to ORA-06510: PL/SQL: unhandled user-defined exception".
Please anyone give ur idea to resolve this issue as it is urgent.What is EBS version? You get this error on which steps or report? If you make search at metalik as FDPSTP failed due to ORA-06510: PL/SQL: there are 35 similar docs avaliable
Regard
Helios -
LabView Run-Time Engine 2009 installation failure
Hi,
I have problem to install Labview Run-Time Engine 2009.
This error occur:
Die Installation von NI VC2008MSMs x86 ist auf Grund des folgenden Fehlers fehlgeschlagen.
Auf den Windows-Installationsdienst konnte nicht zugegriffen werden.
Die kann vorkommen, wenn Sie Windows im abgesicherten Modus ausführen oder der
Windows-Installer nicht korrekt installiert ist. Wenden Sie sich an den Support, um Hilfe zu erhalten.
(The installation of NI is VC2008MSMs x86 failed due to the following error.
The Windows Installer Service could not be accessed. That can occur when you run
Windows in Safe mode or Windows Installer is not installed correctly.
Contact your support personnel for assistance.)
I've tried to reinstall and reregistrate windows installer, I've even tried to upgrade windows installer to version 4.5
I've installed Microsoft Visual C++ 2008 Redistributable x86.
Im runing Windows XP Service Pack 3
(Microsoft Windows Version 5.1 (Build 2600.xpsp_sp3_gdr.100427-1636_ Service Pack 3))
I have no problem installing other programs, I can for example install labview runtime engine 7.1.1.
So my question is:
How to solve this problem, how can I make an installation of Labview Run-Time Engine 2009 on this computer that gives me the error described at the begining?
Best regards
Simon
Solved!
Go to Solution.Hi,
I have already looked at that forum issue.
So I have already tried to delete all keys in regedit.
The problem is, if I continue with my installation, about 10 other new issues will appear.
And my installation will not complete, it will fail.
The installer does not install, it will tell me that the installation failed, and it will only install a few things.
Not all the things that I need to run my program.
See attached pictures ibn zip file to see some errors I receive, I only picked a few of them out.
So when I then tries to start my program I will recive the error in picture program error. (Run-time engine error)
So it's not only that the installer tells me that the installation doesn't go through, it doesn't.
Best regards Simon
Attachments:
Pictures.zip 414 KB -
Error in running request: ORACLE error 20100 in FDPSTP
Got following error when running a concurrent manager job:
ORACLE error 20100 in FDPSTP
Cause: FDPSTP failed due to ORA-20100: File o0002562.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 410
ORA-06512
From the request logfile:
APPPRSPR module: Payment Process Manager
ORACLE error 20100 in FDPSTP
Cause: FDPSTP failed due to ORA-20100: File o0002562.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 410
ORA-06512: at "APPS.FND_
Any idea?
ThanksWe discussed this issue many times in the forum before; please go through old threads and it should be helpful in fixing this issue -- https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-20100&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Error while running the initialize service to create a new application
Hi,
I tried running the initialze service,when I encountered this error.Can anyone help me whith this.
Setting EAC provisioning and performing initial setup...
[03.20.13 23:32:37] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[03.20.13 23:32:38] INFO: Setting definition for application 'Endeca'.
[03.20.13 23:32:38] INFO: Setting definition for host 'AuthoringMDEXHost'.
[03.20.13 23:32:39] INFO: Setting definition for host 'LiveMDEXHostA'.
[03.20.13 23:32:39] INFO: Setting definition for host 'ReportGenerationHost'.
[03.20.13 23:32:39] INFO: Setting definition for host 'WorkbenchHost'.
[03.20.13 23:32:39] INFO: Setting definition for host 'ITLHost'.
[03.20.13 23:32:40] INFO: Setting definition for component 'AuthoringDgraph'.
[03.20.13 23:32:40] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_dgidx-output'.
[03.20.13 23:32:41] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_forge-output'.
[03.20.13 23:32:42] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_cumulative-partials'.
[03.20.13 23:32:44] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_dgraph-config'.
[03.20.13 23:32:45] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-dgraph-input'.
[03.20.13 23:32:46] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-cumulative-partials'.
[03.20.13 23:32:48] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-dgraph-config'.
[03.20.13 23:32:49] INFO: Setting definition for component 'DgraphA1'.
[03.20.13 23:32:50] INFO: Setting definition for script 'PromoteAuthoringToLive'.
[03.20.13 23:32:50] INFO: Setting definition for custom component 'WorkbenchManager'.
[03.20.13 23:32:51] INFO: Updating provisioning for host 'ITLHost'.
[03.20.13 23:32:51] INFO: Updating definition for host 'ITLHost'.
[03.20.13 23:32:51] INFO: [ITLHost] Starting shell utility 'mkpath_temp'.
[03.20.13 23:32:53] INFO: Setting definition for custom component 'IFCR'.
[03.20.13 23:32:53] INFO: Updating provisioning for host 'ITLHost'.
[03.20.13 23:32:53] INFO: Updating definition for host 'ITLHost'.
[03.20.13 23:32:54] INFO: Setting definition for component 'LogServer'.
[03.20.13 23:32:54] INFO: [ReportGenerationHost] Starting shell utility 'mkpath_input'.
[03.20.13 23:32:56] INFO: Setting definition for script 'DaySoFarReports'.
[03.20.13 23:32:56] INFO: Setting definition for script 'DailyReports'.
[03.20.13 23:32:56] INFO: Setting definition for script 'WeeklyReports'.
[03.20.13 23:32:57] INFO: Setting definition for script 'DaySoFarHtmlReports'.
[03.20.13 23:32:57] INFO: Setting definition for script 'DailyHtmlReports'.
[03.20.13 23:32:57] INFO: Setting definition for script 'WeeklyHtmlReports'.
[03.20.13 23:32:57] INFO: Setting definition for component 'WeeklyReportGenerator'.
[03.20.13 23:32:58] INFO: Setting definition for component 'DailyReportGenerator'.
[03.20.13 23:32:58] INFO: Setting definition for component 'DaySoFarReportGenerator'.
[03.20.13 23:32:59] INFO: Setting definition for component 'WeeklyHtmlReportGenerator'.
[03.20.13 23:32:59] INFO: Setting definition for component 'DailyHtmlReportGenerator'.
[03.20.13 23:33:00] INFO: Setting definition for component 'DaySoFarHtmlReportGenerator'.
[03.20.13 23:33:00] INFO: Setting definition for script 'BaselineUpdate'.
[03.20.13 23:33:00] INFO: Setting definition for script 'PartialUpdate'.
[03.20.13 23:33:01] INFO: Setting definition for component 'Forge'.
[03.20.13 23:33:01] INFO: [ITLHost] Starting shell utility 'mkpath_incoming'.
[03.20.13 23:33:03] INFO: Setting definition for component 'PartialForge'.
[03.20.13 23:33:03] INFO: [ITLHost] Starting shell utility 'mkpath_incoming'.
[03.20.13 23:33:05] INFO: Setting definition for component 'Dgidx'.
[03.20.13 23:33:05] INFO: Definition updated.
[03.20.13 23:33:05] INFO: Provisioning site from prototype...
[03.20.13 23:33:06] SEVERE: null
Occurred while executing line 3 of valid BeanShell script:
1|
2|
3| IFCR.provisionSite();
4| WorkbenchManager.updateWsConfig();
5|
6|
[03.20.13 23:33:06] SEVERE: Caught an exception while invoking method 'run' on object 'InitialSetup'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by java.lang.NullPointerException
com.endeca.soleng.eac.toolkit.utility.IFCRUtility extractIfcrErrorMessage - null
regards,
RahulHi Ritwik,
I got this error while running the initialze service . I checked the Dgidx log but there was no log generated as I'm still running the initialize service.
I even checked the workbench port and hostname.Every thing looks fine.
but im not able to login or see the workbench login web page whn i try to access it with the hostname:portnumber .
Regards,
Rahul -
Error while running adlnkoh.sh
I am performing cloning of Oracle Apps R12 version 12.0.4
Using cold backup single node to single node.
I got an error and i checked the logfile i got this
Error while running adlnkoh.sh.
return code = .1.7.12.14.15.16.17.18.19.21.22.23.24.25.26.27.30.32.33.34.42.43.44.45.46.47.48.49.51.52.53.54.55.56.57.58.59.60.62
Please check logfile located at /oracle/cloning/db/tech_st/10.2.0/appsutil/log/TEST1_zishan/make_12091249.log
Then I had seen above logfile and i got this error
running genclntsh...
/oracle/cloning/db/tech_st/10.2.0/lib/libcore10.a: could not read symbols: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
Failed to generate client shared library on Thu Dec 9 12:49:07 IST 2010...
rm -f oracle dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest expdp impdp imp exp sqlldr rman nid extjob extjobo genezi ikfod grdcscan /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/ksms.s /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/ksms.o
Completed removing old executables on Thu Dec 9 12:49:07 IST 2010...
/usr/bin/gcc -O2 -I/oracle/cloning/db/tech_st/10.2.0/rdbms/demo -I/oracle/cloning/db/tech_st/10.2.0/rdbms/public -I/oracle/cloning/db/tech_st/10.2.0/plsql/public -I/oracle/cloning/db/tech_st/10.2.0/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -c -o config.o config.c
Completed relinking target config.o ...
Completed linking target links on Thu Dec 9 12:49:09 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/precomp/lib
Linking /oracle/cloning/db/tech_st/10.2.0/precomp/lib/proc
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
/bin/chmod: cannot access `/oracle/cloning/db/tech_st/10.2.0/precomp/lib/proc': No such file or directory
make: *** [oracle/cloning/db/tech_st/10.2.0/precomp/lib/proc] Error 1
Failed linking target relink on Thu Dec 9 12:49:10 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/rdbms/lib
/usr/bin/ar cr /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/libknlopt.a /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/kkpoban.o
/oracle/cloning/db/tech_st/10.2.0/lib//libcore10.a: could not read symbols: No more archived files
collect2: ld returned 1 exit status
make: *** [oracle/cloning/db/tech_st/10.2.0/rdbms/lib/oracle] Error 1
Failed linking target oracle on Thu Dec 9 12:49:12 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/network/lib
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
Failed linking targets nnfgt.o mkldflags client_sharedlib on Thu Dec 9 12:49:12 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/sqlplus/lib
make: *** [sqlplus] Error 1
Failed linking target sqlplus on Thu Dec 9 12:49:12 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/rdbms/lib
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
make: *** [trcroute] Error 1
Failed linking target install ((ins_net_client.mk) on Thu Dec 9 12:49:12 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/plsql/lib
chmod 755 /oracle/cloning/db/tech_st/10.2.0/bin
make: *** [ctxload] Error 1
Failed linking target install on Thu Dec 9 12:49:13 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/sysman/lib
make -f /oracle/cloning/db/tech_st/10.2.0/sysman/lib/ins_sysman.mk relink_sharedobj SHAREDOBJ=libnmemso
Error found while relinking
return code = .1.7.12.14.15.16.17.18.19.21.22.23.24.25.26.27.30.32.33.34.42.43.44.45.46.47.48.49.51.52.53.54.55.56.57.58.59.60.62No it is not packages problem i had check all the packages it is showing some relinking error.
Please do help me out, I am sending u the log record of make file
/oracle/cloning/db/tech_st/10.2.0/appsutil/log/TEST1_zishan/make_12091509.log
running genclntsh...
/oracle/cloning/db/tech_st/10.2.0/lib/libcore10.a: could not read symbols: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
Failed to generate client shared library on Thu Dec 9 15:09:21 IST 2010...
rm -f oracle dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest expdp impdp imp exp sqlldr rman nid extjob extjobo genezi ikfod grdcscan /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/ksms.s /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/ksms.o
Completed removing old executables on Thu Dec 9 15:09:21 IST 2010...
/usr/bin/gcc -O2 -I/oracle/cloning/db/tech_st/10.2.0/rdbms/demo -I/oracle/cloning/db/tech_st/10.2.0/rdbms/public -I/oracle/cloning/db/tech_st/10.2.0/plsql/public -I/oracle/cloning/db/tech_st/10.2.0/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -c -o config.o config.c
Completed relinking target config.o ...
make[1]: *** [oracle/cloning/db/tech_st/10.2.0/sysman/lib/nmccollector] Error 1
make[1]: Leaving directory `/oracle/cloning/db/tech_st/10.2.0/sysman/lib'
make: *** [nmccollector] Error 2
Failed linking target collector on Thu Dec 9 15:09:34 IST 2010...
The value of IS_RAC:false
Error found while relinking
return code = .1.7.12.14.15.16.17.18.19.21.22.23.24.25.26.27.30.32.33.34.42.43.44.45.46.47.48.49.51.52.53.54.55.56.57.58.59.60.62 -
ERROR while running attribute change run.
hi sap xperts,
I got an error while running the attribute change run in a process chain.
At first i got an error "The action is locked by a change run"
SO I DID THE FOLLOWING STEPS.
1.RUN ATTRIB CHANGE RUN MANUALLY IT RUN SUCCESSFULLY,but the process chain is still red.
Q1.Is there any way to link the manually run attrib chnage to process chain so that the process chain becomes Green?
2.SM12 - realease the locks and right click the pc and repeat.It didn't work
Q1.While removing the locks what should we remove,bcoz i removed all the locks?
3.I again removed the lock and repeat the process but still i didn't work.Now its chowing "SQL ERROR OCCURED WHILE ACCESSING"
So the Process chain got stuck,Can any body help me to run the attrib chnage run.
If possible can anybody send the Process chain monitoring documents to my email id:
<email ID removed>
please.thanks in advance,i know how to say thanks in sdn.At any point in time only one attribute change run can run in the system. The other ACR's will fail due to locks. In your case, to set the process chain to green, try the following steps.
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
The above steps will help you continue with the rest of the process chain (thus avoiding manual runs) but the failed step might still remain red. Hope this helps. -
Error while running my javascript file
I got javascript error while running my script file through visual basic. But i did not get error if i run the script strightly through script folder. Kindly advice me how to solve it
Photoshop Scripting Forum http://www.adobeforums.com/webx?13@@.3bbf2765
-
How to rectify the error in running the apk file in emulator.
hi
I have developed the air based android application and got .apk file.I installed the .apk file in emulator which is version 2.3.1 android but i got the error
when running it as
"The Application HelloWorld Has Stopped Unexpectedly. Please Try Again"
How to rectify the problem.Please anybody help me with this what the exact problem in this...................
thanks in advance.....................Hi Anson,
You looked at old installation guide.
I see you use old UI components which were released in May 2013.
Important Note: Please use new UI with new SAP Fiori Launchpad
New UI components have UI extension points and work with new SAP Fiori Launchpad.
Please find correct components based on your Backend version.
SAP Fiori - Add-on quick reference for transactional apps
Regards, Masa
SAP Customer Experience Group - CEG
Maybe you are looking for
-
Hi all, I have one LOOP and two READ statements inside of it. After each READ statement i need to MODIFY some lines. In one of MODIFY statements i use MODIFY...INDEX sy-tabix but it seems that is not a good way to correctly modify line that I would l
-
Why my iwork is in top free category but there's still price present?
What should i do so that i can download Iwork free
-
I still use Win XP sp 3. My firefox browser doesn't do it very much. I will have everything else closed out except my firefox. I'm not doing anything differently than should be done to finish. I will click the X to close. Then, I want to go right bac
-
I have about 800 songs in my itunes library and only 300 are syncing onto my iPhone. Is there a way to fix this?
-
Opening SGML Files in Framemaker 7
I have Frame Maker version 7.0p492 Structure running in Windows 2000 SP4<br /><br />I have received several files from another company in SGML that were done in "Epic Editor" and I need to open them in Frame Maker. I have had some success opening th