Urgent !! - Hang analysis doesn't work

Hello Friends,
I'm using 10.2.0.3 grid control. When I click on performance - > hang analysis it throws up the following erro
The agent received the following error when getting data for the Hang Analysis display: ld.so.1: oracle: fatal: libodm9.so: open failed: No such file or directory ld.so.1: oracle: fatal: libodm9.so: open failed: No such file or directory ORADEBUG HANGANALYZE could not be run [ORA-12547: TNS:lost contact, ORA-12547: TNS:lost contact] at /oraDBusers/agentn10g/agent10g/sysman/admin/scripts/db/hanganalyze.pl line 76.
I have spent about 6 hours. deinstalled, reinstalled i don't seem to find the above library that it is complaining about.
Thanks,
Madhu

Paste the install action log

Similar Messages

Referencing during analysis doesn't work correctly

Hello EH&S guys,
I encounter a strange problem (or is it working correctly?).
During referencing of an amount stated in the risk assessment, the referenced value is not found.
The characteristic of the referencing value is stated as g/cm3.
It seems that whenever I put for instance g/m3 or any other UoM than stated in the characteristic (CT04) it doesn't work.
Is this normal behaviour? Should the UoM only be limited to the one stated in CT04?
Thanks in advance.
Regards,
Pascal

Hello Ravindra,
Thank you for looking into this. I think I was not really clear in my question. I try to explain it othewhise.
We have a characteristic:
SAP_EHS_1013_005_VALUE
This characteristic has the UoM "g/cm3"
This belongs to the value *** Type SAP_EHS_1013_005 which is used for the property "Density".
In the property tree, I can assign a different UoM than the one stated in the characteristic. For instance:
2 mg/m3
So in our example we would have a threshold value of 2 mg/m3.
In a risk assessment, I enter over in the amount tab "Mass Concentratiön" a value of 0,5 mg/m3.
If I perform the analysis Methods, the system doesn't find the threshold value stated in the property (it sends me back 0 mg/m3).
Is this normal behaviour? Or is this a bug.
Could it be that we are only allowed to use the UoM "g/cm3" since that was the UoM stated in the characteristic. If this is the case, it would not be possible to use other UoM in the property for Density.
Thanks for you advice in this.
Regards,
Pascal

Speech Analysis doesn't work on MPEG clips...?

A few months ago, I was able to analyse my MPEG clips, now for some reason, it doesn't work. Out of curiosity, I made a quick video in Photo Booth and that worked fine. I then converted an MPEG to an MOV and that worked fine too.
I realize I sort of found the solution to my own problem but there has to be a way to make MPEG clips work. Right? Three months ago, it worked fine. What changed?

Yes, you are right, MPEG-4 is far better than MJPEG...Ideally MPEG-4 should work on your Camera, kindly state what made you think it does not work(kindly explain) ?
Set the MPEG-4 Settings (Resolution) to 640x480, 30fps max and see if it works(it should work)...
Here are the advantages of MPEG-4 -
Key Advantages of MPEG-4 :
-- Reduces the amount of storage needed
-- Increases the amount of time video can be stored
-- Reduces the network bandwidth used by the surveillance system
Examples of MPEG-4 applications :
-- An example of a situation where MPEG-4 could be utilized to solve a bandwidth issue is if the video traffic was going be part of an existing 100Mbs network. The network would be saturated sooner if MJPEG cameras were put on it.
-- Another example of where MPEG-4 could be the solution is if the storage on the NVR was relatively small
and archiving could only be done once a day.
-- A third example of utilizing MPEG-4 benefits would be if the length of time desired to store archives was unusually long, or just too long, if MJPEG images were stored.

Urgent - Upgraded Form doesn't works well with values saved by previous ver

Hi all,
Form i m working on has changed many times due to change in requirments.
Everytime i do addition in old form, it doesn't works well be data saved by older versions.
e.g.
Current Version that i have upgraded fetchs the data well from database on query. But when i save it, clear or exit the form and then re-query that data, it doesn't show up instead meassage comes that query caused no records to be fetched.
i checked at database level, data is there.
and when i tried to call data from old form, it also refused to show it (data that was previously entered by itself but then saved by new form).
what could be the problem and i can i resolve it.
plz note that in all of this process, there are no database level changes, only form level changes.
regards,
yasir

sounds like spaces are being padded at the end of the data
check the length of the values you've changed in sqlplus and see if they are indeed right padded

Copy to send folder ALWAYS HANGS and doesn't work.

My emails consistently have issues copying to the Sent folder. The emails go through, but for some reason this is ALWAYS a problem. PLEASE HELP! I love TB and don't want to switch back to Outlook!

Thanks for your response!
The copies are all set to go to my "sent" folder in the proper account (don't want to do a screen grab for security reasons).
Also, the folder is in the subscribe list - the same folder that is in the account settings.
I found that when I closed the program and ended the process in Task Manager and reopened, it started copying the emails to the Sent folder correctly again.
I'm sure I will have this issue again today, but perhaps I'll try restarting Thunderbird again to see if it helps...

Please help URGENT : Chinese handwriting doesn't seem to work on Lion OSX. the handwriting trackpad appears but anything i write in Chinese doesn't appear in word, chrome,..... HELP PLEASE

please help URGENT : Chinese handwriting doesn't seem to work on Lion OSX. the handwriting trackpad appears but anything i write in Chinese doesn't appear in word, chrome,..... HELP PLEASE
And in system prefs/language and text/input languages, simplified chinese and traditional chinese are ticked as usual with handwriting options on !!!!

Please search the forum for "chinese" to find the many other earlier posts about your issue, like
https://discussions.apple.com/message/15746805#15746805

When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press home or lock buttons firs

When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up so I can see and click the hang up button, but it then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press the home or lock buttons first

Wow- thanks Jim! I removed the case and voila... it worked. Knock on wood that you solved my problem with such an incredibly simple solution. I'll find out where this proximity sensor is and make sure my case does not interfere with it.
Thanks so much.
Annick

PRT file doesn't work (printer codes) (urgent)

Hi,
I've got a small problem using a custom prt file for printing reports on a Epson TM-T88 printer.
I'm trying to use the printer codes which are in the programming manual of the Epson printer for cutting the paper.
But it doesn't work.
This is the prt-file:
printer "kassabon"
before report esc "@"
after report dec (27) dec (86) 1 dec (27) dec (105)
Who can solve this problem?
It's very urgent.
Thanks in advance!
null

Nobody?

Safari doesn't work anymore on my iPad- it hangs completely. Anyone knows how to recover?

Safari doesn't work anymore on my iPad- it hangs completely. Anyone knows how to recover?

Repeated to another user:
I have had the same issue since the release of iOS7. I even went as far as a factory reset of my iPad 2 and did not restore from any backup. Safari still will not load any pages. It hangs then stops.
I have tried the steps above so please don't repeat them. I refuse to believe I am the only person on the planet that cannot get a resolution for this?
Please, somebody, help me fix this. It's extremely annoying that the default browser cannot be change yet will not work.
DB

Game room doesn't work, as it tries to save nickname and hangs while trying to save nickname info

Game room doesn't work, as it tries to save nickname and hangs while trying to save nickname info

From my understanding, trying to save apple server specific attributes on Active Directory users in the WGM will not work unless the AD schema has been extended to include these attributes.
What you can do in leopard server is to export the list of AD users in WGM and then import them into open directory in WGM.
From my testing the open directory will automatically authenticate with AD for those imported users. You can save Apple server attributes on those imported users.
Message was edited by: Kwong Kian Tew

HT1430 Hi I am having a problem to delete call log in iPhone 3GS from last 1 month, I have restore iPhone many times but it doesn't works, pls give me a solution , whenever I try to delete call log it's hang for some time.

Hi I am having a problem to delete call log in iPhone 3GS from last 1 month, I have restore iPhone many times but it doesn't works, pls give me a solution , whenever I try to delete call log it's hang for some time, pls tell me how to restore call delete option

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

URGENT - Error "Unable to open file because it isn't a valid Keynote document" - and there is no index file (so the usually suggested solution doesn't work)

Hi there,
As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
Thanks a lot in advance.
Best,
Just a regular apple user
PS: any other presentation opens fine in Keynote (09)

Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with.

Urgent! please help: why socket.setSoTimeout(ms) doesn't work precisely

I wanted to set timeout for the sockets accepted by server as:
Socket socket = server.accept();
socket.setSoTimeout(5);
Since I want the server to process next request (another thread) as soon as read block happened on the current one, I set the timeout to be extremely short. But it doesn't work. I intentionly blocked my testing client and timed my first .read() method from server. 200 ms actually escaped, no timeout happened. What could be the problem?

You can't really expect processors to be that fine-grained. There are multiple factors:
1) other apps are running (such as the OS), consuming processor time as well
2) processor speed
3) etc.

URGENT ! Oracle application server document link doesn't work...

we can't download these document for 3 day.
http://download-uk.oracle.com/docs/cd/B10468_04/docs.htm.
Whole library can be dowloaded as zip file but zip file curropted and doesn't work.
we are at migration stage of application server and we need these documents upgently.
(we are from turkey)
Thanks...

Hi Ali,
Our Apologies, the file was indeed corrupt.
However, the developers spotted the issue and new files are currently being externalized for this Documentation Library. They should be live by 17:00 GMT at the same link on OTN.
Regards,
Les

Enterprise Manager - Hang Analysis

I am using Oracle 10g Release 1 . On Enterprise Manager , Hang Analysis I am looking for a way to examine data from the last 40 hours. I had some frozen sessions starting yesterday morning and am searching for possible causes. The system is working fine at the moment. On the hang analysis option on Enterprise Manager there doesn't seem to be a way of examing past data.

Did you check the entries you made in your preferred credentials?
Eric

Urgent !! - Hang analysis doesn't work

Similar Messages

Maybe you are looking for