Urgent :- Hard Ware & Software Requirments for web enabling

Currently we are using forms 4.5 and forms 5.0 ,we r planning to convert current our application to web enable
for the same, please provide hardware as well as software requirments asap
regards
Venkat

Open Disk Utility>First Aid and run 'Verify' and 'Repair' Disk. That may solve that problem.
Regarding the battery, see if any of the information contained in this article will help:
http://support.apple.com/kb/HT1446
Your software issues may be a reflection of a corrupt HDD. Attend the to internal HDD and then see if the software issues still persist.
Ciao.

Similar Messages

I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware software worked more than 3 times did not fix

dears,
I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
Network also always missing.
I am living in KS Wichita. I hope you help me pleas.
Regards.

iPhone warranty is not international. You will have to return your
iPhone to Saudi Arabia for repair/replacement. Either take it back
yourself or send to friend/relative for them to take to Apple. Apple
will not accept international shipments for repair nor will Apple
ship repaired/replaced iPhones out of the country where the repair
was done.

Options for Web Enabling Oracle?

Hi,
I am wanting information on the different ways in which to web front end an Oracle DB. We have plenty of PL/SQL and Forms experience in a Client Server architecture but are wanting to write an application with a web front end. Apart from web enabling forms, which we have ruled out what options are available to us.
We have been looking at possibly using JSP but are not sure whether the project will take the learning curve this will incur. I seem to remember there being a PL/SQL cartridge for generating HTML.
Any help at all greatly appreciated.
Roy

yes, mod_plsql for Apache (the core of Oracle 9iAS) allows you to make PL/SQL calls from a browser environment and return HTML. the entire Oracle Portal product is written using this mechanism.
learning JSP from scratch, and learning how to manage security, database connections and record sets would be a daunting task. if you want to learn Java, great. it's my favority web language. however, if you have PL/SQL experience and a need to get information to the web, use mod_plsql and generate dynamic content via PL/SQL and the database.
good luck,
rich

OAS Custom Help For Web-Enabled Forms

Anyone had experience implementing a customized help system into Web-Enabled Forms running on OAS. Regular Oracle Forms can display a help system using a specialized Oracle Form D2KHMain.fmx or using WinHelp with the library D2KWhelp.pll. Will either of these work when running the Forms on the Oracle Application Server? Java Help has been suggested? Any documentation would be helpful? Thanks.

do the following:
1. write a java program that read from the registry. you will use the program as a javabean later on.
2. compile the source and create a class/jar
3. sign it (goto sun site for details on signing class/jars). you must sign the java program or it will not be able to have access to the registry. make sure you do all the steps by following sun's instructions.
4. put it on your web server and modify the html file you use to start your developer application to include your class/jar.
5. oracle has some demos on attaching javabeans to forms. use them to help you.
6. use the program you wrote in step 1 as a javabean in your forms.
Yossi

Where is the URL defined for web enabled transactions / PFCG execute?

Hi
One of our developers is having an issue. Apparently, when executing a web enabled transaction from within PFCG (in the menu structure right-click and choose u2018executeu2019) the Internet Explorer on the client is started with a url to: http://www-s1pprint.ourcompany.com/sap/bc/webdynpro/.... which is incorrect (note our system SID is S3D but it was copied from S1P, however, what is the 'print' part??)
When testing the exact same service from SICF it is working well and goes to the correct URL http://www.esd3002a.ourcompany.com/ etc, so the reference must come from another source. We'e checked parameters in SM59, RZ10 and SMICM so far and can't find anything relevant.
Where is this set?
Thanks
Ross

What's the content of the parameter
icm/host_name_full
(check using RZ11).
Does this return the proper full qualified hostname? If yes, check the hosts file and/or DNS of the server whether the IP resolves to the proper name and vice versa.
Markus

SAP EU software component for Web Dynpro SP9

Hi all,
I've followed the tutorial on how to create a Web Dynpro Callable object and couldn't go further because I couldn't find the libraries needed in the Local DC (caf/eu/gp/api/wd) api's.
I've found the Blog from Andre Truong on how to retrieve this API's in your Local Development Component projects (SP7).
/people/andre.truong/blog/2006/06/26/working-with-the-apis-of-caf-guided-procedures-nwdi-or-local-development
Unfortunally this is only working for SP7 (And maybe SP8) but not for SP9.
In the blog Andre mentioned that this problem might be resolved with SP9 because the API's come as default with the IDE.
This appears not to be the case for me.
Does anyone know how to resolve this problem?
PS I also read the following thread and the reply from Tomas Kuba but that seems to be a difficult and dirty way to do it?
Re: Guided procedures & WebDynpro (SAP-EU software component)
Thanks in advance!

Ok, seems to work just fine for SP 9 also.
Only the folders eu and gp don't excists. Just create them and extract the zip files.
Great blog thanks!
Message was edited by:
B. van Prooijen

Web enabling for V6 not working

I'm trying to follow the instructions for web enabling a system, produced using Headstart & Designer V6. When I try to convert the object library, entering 'form2lib.exe -i webmol50.fmb -o qmsolb50.olb APPEND', I'm getting the following error:
'form2lib.exe - Unable to locate DLL. The dynamic link library f50d2f32.dll could not be found in the specified path'.
Presumably this is because webmol50.fmb was produced using Developer V5; I loaded the form using Forms Builder V6, but no conversion took place. What do I need to do to get around this problem?

There is a new version of the Form 2 Lib utility for use with Forms 6.0.
fm2lib60.exe
The rest of the command is the same.
Regards,
Lauri

Web Enabling SAP R/3 Transactions in the Portal

Hi,
Our requirement is to web enable SAP R/3 (>4.6) transactions in the portal (EP 6.0). We don't want to check for user authorization in the portal as all these things are done in the R/3 system. We just want to have an iView in the portal which will show all the transactions user is authorized for (in the R/3 system). I think it will be something similar to when the user logs into the R/3 system using SAP GUI.
Just to make it more clear, I am not looking for web enabling of a single R/3 transaction. I am looking for the web enabling of R/3 system as a whole in the portal.
Can anyone please tell the steps to do the same?
Please let me know for any clarifications.
Regards,
Chandra

Hi ,
Well first of all, nthis kind of interface is not suggested. But still if you need this kind of interface.
then you need to have a seperate installation of ITS server. You need to define a SAP transaction based Iview.
In property you can call any normal transaction, which gererally every user will have access to.
Now attach this iview to any existing iview or create a new iview in Portal Content.
Add the concerned page to a role/create a workset and add this page to it. and workset to concerned user role.
this will take care of your requirement.
if you need exact steps please let me knoe.

WEB ENABLING OF R/3 TRANSACTIONS IN PORTAL

Hi,
I was going through different forums on SDN regarding this subject and at lot of places, it is said that ITS takes care of conversion of R/3 screens to html screens. So even if it is a custom transaction, developer doesn't need to worry for web enabling a transaction in the portal.
Now I have two questions regarding this
1. How to web enable a standard transaction?
1. Is web enabling for a standard transaction and custom transaction done in the same way? If not, how is it done for custom transactions.
2. If web enabling (conversion from sap gui to html) is taken care by ITS itself, what is the need of importing business packages on the portal side.
Any response to this is highly appreciated.
Please let me know for any clarifications.
Regards,
Chandra

> 1. How to web enable a standard transaction?
You need to have your SMICM and SICF settings in place and running.
> 1. Is web enabling for a standard transaction and
> custom transaction done in the same way? If not, how
> is it done for custom transactions.
In ITS you need to develop and publish an Internet service which is roughly an equivalent to r/3 transaction.
> 2. If web enabling (conversion from sap gui to html)
> is taken care by ITS itself, what is the need of
> importing business packages on the portal side.
I'm not entirely familiar with the SAP portal solution, but once the service is published through ITS it is accessible through any browser, so any portal not just from SAP should be able to display it.
One big benefit of having 640 over earlier versions is to have one sap instance serve the web pages to your browser.
The actual human interface of "web-enabled" transactions is very similar to standard sapgui, so it looks like the old transaction, but is often slower and more clunky.

How to Web enabled my forms?

Hi,
Now i am working in two tier architech. I want to go for 3 tier.
My database server --- Oracle 9i (Separate Sever,Linux)
Forms and Reports execution files are kept into Separate server(Application,linux)
Client side i am installing Runtime enviroment and executing my application.
My request
I want to go for web enable. Please help me in which,what should i want to do.
and where can i get the Forms Server (oracle 9i and Developer suite 6i for this combination which Version Forms Sever is best and i need in Linux based).
Kanish

You might want to start here:
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
There are some good documents to help you understand what all is needed to take your Forms application from client/server mode to web, particularly this one:
http://www.oracle.com/technology/products/forms/htdocs/upgrade/roadmap.html
Thanks
Shail

Built-in support for web streaming camera?

Hi,
I have a Sony MiniDV camcorder that supports web streaming.
Is there any built-in software support for web streaming?
If not, could someone please recommend software that will allow me to setup my camera in my house and view the streamed data over the internet?
Thanks!!
BT

You can download Quicktime broadcaster for free to do this. See http://www.apple.com/quicktime/broadcaster/
We've used it to stream a live event from an art gallery and then to a Quicktime Streaming Server (available free in the Darwin version) to broadcast to the world.
Dave
PowerBok G4 1.25G RAM, 1GHz Mac OS X (10.4.5)

Required Software and Hard ware Confugataiton for SAP BPC /SAP NetWeaver

Hello Experts
I want to know what r the Reqired Hard and software's r required to start a SAP BPC NetWeaver 7.0Virsion
Can any one know what r the hardware r requird what software's i have to install
Expert's Pls Help me with u r Valueble Help
Thanks In Advance
Regards
Narsi
SAP BPC Consultant

Hi,
Check this instalation guide for Sap BPC NW 7.0 version.
[Installation Guide|https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000085368&_SCENARIO=01100035870000000112&_OBJECT=011000358700001123512008E]
Note: need sap market place password.
thnks..
Edited by: Sakthi Jaganathan on May 21, 2009 6:59 PM

How to web enable NT forms for Unix Environment

We would like to convert our NT forms
to Unix forms and make them web enabled.
We are looking for any UNIX setup information we can find so that we can get started.
We have already installed DEV6i Forms and Reports and it appears the server software went down as well.
WoW the questions.
Where does OAS 4.0.8 fit into the equation?
Do we need to use a JRE on the PC's? Is Jinitiator at the PC's O.K.?
How do you use the unix product Project Builder? -- what launces it? Is it motiff?
Is their any simple documentation for how to web enable forms.
It should be so complex --
Does anyone have a check list of what software should be installed.
Any directions for how how to configure the environment?
we believe we need some sort of checklist for what to do... Can anyone give any help.

You should install Oracle9iAS v1.0.2 on your unix machine. This will have The Forms services configured for you and save you all the manual settings.
Check out the internet deployment section on
http://otn.oracle.com/products/forms

Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Yes.
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
Otherwise, you may need to do one of the following steps.
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
If you continue to have problems with your disk, it may be physically damaged and need to be replaced

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

Urgent :- Hard Ware & Software Requirments for web enabling

Similar Messages

Maybe you are looking for