Urgent HELP cannot open project

I have been working on alarge project this summer. I am right by the end but I had to close my fc program last night and when I tried to reopen it I first got message "The movie file ....-FIN-...... cannot be found,Whithout this file, the movie cannot play properly." I went to search it didint show up I looked all over and cannt find it. I pressed cancel and "Cannot open this program" came up.
HELP HELP Iwent back to saved copies and the same thing happened. what can I do??? I tried trashing prefrences and it didnt help. could I make a new movie file same name to fool it? HELP
Message was edited by: harveybuck

FCP Recue is a simple GUI wrapped applescript that just removes you application preference files (and you did that already) .... it won't magically fixed missing or corrupt media
You're not providing enough information. We can't see your screen from here.
What is your hardware setup exactly? Are you using an external media drive or is your media stored on the startup disk? How did you go about disconnecting/unmounting the media as described above?
Are you indeed using Final Cut Express 3.5? If so, you are in the wrong forum as this is the Final Cut Pro forum (FCE's big brother). Have you asked for help in the FCE forum? It may be that this is a common and known issue with that app, I wouldn't know. That said, I'm happy to keep plugging away at this but if we're using different apps it may be going nowhere fast.

Similar Messages

Urgent help - Cannot open examsoft app in Mac (Yosemite)

I need to use examsoft and downloaded and installed to my Mac (OXS Yosemite), but I could not open it. Whenever I am trying to open it, it just pops out in the dock and then quit immediately. What should I do? Thank you!

Nope, I didn't buy any apps in Amazon store, or any other stores. But some of my apps are not from Mac App Store because I can't find them in it.

FCP X cannot open project that I created in the trial version

I bought FCP X. Now I am trying to open projects that I worked on in the trial version but they will not open.
I get the following message:
I already trashed the trial version.
Can somebody help me?
Thanks
Annemarie

You cannot open projects in FCP. You need to update your projects and events for the new version. Read about it. Start here
http://www.fcpxbook.com/updates/101/101libraries.html

Cannot open project: the folder for this project cannot be found cs4

I am using Encore CS4 and I get the error "cannot open project: the folder for this project cannot be found"
Having searched the forums I can not find a solution for when the project folder has been deleted.
Can someone tell me the solution to this issue.

If you deleted the Encore directory, you cannot fix this. You'll have to start over.
Encore creates this folder structure:
Root or some other Folder
MyProject.ncor (the Encore project FILE)
MyProject (the Encore project directory)
Other Folders for the Encore project (e.g. Cache, Sources)
You can get the "the folder for this project cannot be found" in various ways.
There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name. You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
Folder was renamed. If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
Encore project file was moved - or Encore directories were moved. If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone. While many of its instructions are inside the project file itself, many are not. Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

Photoshop files in FCE - Cannot Open Project

I have a series of Photoshop files (RGB with about 10 layers a piece).
I am able to import a file into FCE HD and move the layers around as tracks - everything works great.
I save the file, and close. When I try to re-open the file, I get the dreaded "Cannot open project file".
I have tried this with an external drive and saving to the desktop. I have also tried importing normal pictures - no problem. It's when I import layers. I have been able to isolate the problem to layered Photoshop files.
Any ideas?
thanks.

Any PS file that has transparency that is imported
into a PAL project will corrupt the file, so
that you cannot open it again. Sorry.
See this (9th post down) which showed that any file created in Photoshop with its type as ".psd", whether with or without transparency, will give this fault. However, a file created in Photoshop with .tif will be safe even if it has transparency.
G5/2.0 GHz Mac OS X (10.3.9) 1 GB RAM, 150 GB HD, Sony DCR-HC96 mini DV, FCE HD 3.0 DVD SP 3

CS4 Encore cannot open project

Why after creating a CS4 Pro project, Dynamic Link to Encore shows error "Cannot open project; The folder for this project cannot be found?

This forum is for "current" Premiere Pro
PProCS4 = http://forums.adobe.com/community/premiere/premierepro_previous?view=all
Encore = http://forums.adobe.com/community/encore

Cannot open project file with write access...

I have seen that this problem has been reported before but have yet to find a solution.
I have my project file in an external hard drive. When I plug the hard drive to another computer and want to save it I get this message:
"Cannot open project file with write access. The file may be locked or you don't have permission to write to this location. Select Save As..."
I don't want to Save As because other projects make reference to this file and also my Encore file will be messed up.
FYI both computers use Windows 7.
Any solutions?

Right click on the folder in Question and select properties. Then select the security tab. Make sure you add everyone to the user list. You do that by selecting edit and then add. Type in everyone in the object section and hit ok. Then select the everyone user and checkmark the Full control. Hit Apply and it will adjust the permissions for the folder and subfolders and files.
Eric
ADK

Cannot open project. Just got an error message that says: ' project contained a sequence that coul

Cannot open project. Just got an error message that says: ' project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated witht his sequence type. " how do I navigate this and reopen my project. ( note: I recently transitioned from the 30 day free trial to 'buying in' to the license cloud application; if that has relevance....)

FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

Cannot open project file in Project 2010

Hi,
I have a project created in Project 2010. I can save it without any problems. But some saves are broken and I cannot open them again. When I open saved project an error message is displayed:
There was a problem sending the command to the program and Project freezes. Project 2010 itself starts without any problems. What's strange I can open this file in viewers like MOOS Project Viewer 2.0 but not in Project.
Any tips highly
appreciated.
Lukasz Chomin

Hi Lukasz,
Welcome to this Microsoft Project newsgroup :-)
It sound as though that project has corruption. If you can open it at all, follow the advice given below. If you can’t open it at all, it seems like it’s lost – you do have a backup don’t you?
If you can open it in another program, try copy/paste the data back into a new project.
If you suspect a corrupt file, you could try the suggestions in FAQ Item: 43. Handling project file corruption and/or bloat.
FAQs, companion products and other useful Project information can be seen at this web address:
http://project.mvps.org/faqs.htm
Hope this helps - please let us know how you get on :-)
Mike Glen
Project MVP
See http://tinyurl.com/2xbhc for my free Project Tutorials

Cannot open project - Newer Version of Premiere?

I am attempting to open a Premiere project file that was sent to me. It was an After Effects project that has been converted to a Premiere project as I do not have After Effects. I cannot open it, as Premiere pops up with a box saying that the project was created using a newer version of the program and cannot be opened in this version. I am running CC and am up to date. What's going on?

No its not.
Adobe confused us with a CC 2014 (8.0) and now its CC2014.1 (8.1.0)
If i got that wrong.... its cos I am confused. (easily done)
If you want a worse example of software versioning...try and work out NVIDIA drivers, HP Printer Drivers or BM Drivers.

LV RTE cannot open project files that have .lvlib references in Dependencies

I'm writing a LabVIEW DLL to inspect LabVIEW project files, and I've noticed that if a project has a .lvlib reference in its Dependencies, then the Run-Time Engine contradicts itself about whether or not it can find the project file:
Project.Open returns error 7 (file not found)
Project.GetFileLVVersion is successful
Here are snippets from my G and C code that exercise this behavior:
int openStatus = StatusSuccess;
char* projectVersion = createStringWithLength(VersionStringLength);
printf("Analyzing %s\n", pathString);
OpenProject(pathString, &openStatus, projectVersion, VersionStringLength);
printf(" Project written in LabVIEW %s\n", projectVersion);
if (openStatus == StatusSuccess)
printf(" Opened project file.\n");
else
printf("Error: Could not find project file, or file was not a project file (error code %i).\n", openStatus);
However, when running in the development environment, both methods succeed.
Is this a bug, and if so, is it fixed in LabVIEW 2014?
Here is how you can reproduce it:
Prerequisites:
LabVIEW 2013 SP1 32-bit
ConEmu for a good console -- https://code.google.com/p/conemu-maximus5/wiki/Downloads
minGW for compiling a program to use the LabVIEW DLL -- http://sourceforge.net/projects/mingw/files
.lvlib reference in Dependencies breaks Project.Open in LV RTE
Unzip the attachment into a temporary directory (eg c:\xtra\temp)
Open "OpenProject.lvproj" in LabVIEW.
Build "Open Project Library".
Using ConEmu with a bash prompt, navigate to the temporary directory.
Type make
$ make
patching file `builds/platdefines.h'
gcc -std=c99 -g OpenProject.c -o OpenProject.exe -lOpenProject -Lbuilds
6. Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
$ OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Analyzing c:\xtra\temp\OpenProject.lvproj
Project written in LabVIEW 13.0
Opened project file.
7. Notice that both invoke nodes execute correctly.
8. Type OpenProject 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj'
$ OpenProject 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj'
Analyzing c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
Project written in LabVIEW 13.0
Error: Could not find project file, or file was not a project file (error code 7).
9. Notice that the version node succeeded while the open one failed.
10. Type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
$ diff -u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
--- OpenProject.lvproj Tue Nov 4 11:28:28 2014
+++ OpenProjectWithLvlibDep.lvproj Tue Nov 4 11:32:37 2014
@@ -13,7 +13,11 @@
<Property Name="server.vi.propertiesEnabled" Type="Bool">true</Property>
<Property Name="specify.custom.address" Type="Bool">false</Property>
<Item Name="OpenProject.vi" Type="VI" URL="../OpenProject.vi"/>
- <Item Name="Dependencies" Type="Dependencies"/>
+ <Item Name="Dependencies" Type="Dependencies">
+ <Item Name="vi.lib" Type="Folder">
+ <Item Name="NI_MABase.lvlib" Type="Library" URL="/<vilib>/measure/NI_MABase.lvlib"/>
+ </Item>
+ </Item>
<Item Name="Build Specifications" Type="Build">
<Item Name="Open Project Library" Type="DLL">
<Property Name="App_copyErrors" Type="Bool">true</Property>
Here is another way to trigger this behavior, which also shows that LabVIEW only sometimes tidies the Dependencies item:
Open "OpenProject.lvproj" in LabVIEW.
Add a new VI to the project and place the "Application Directory" file path constant its block diagram.
Select "File » Save All (this Project)" and use the default name for the new VI.
Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Notice there is an error again, as is expected.
Remove the "Application Directory" file path constant.
Select "File » Save All (this Project)"
Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Notice the problem is gone, as is expected.
Re-add the "Application Directory" file path constant to the block diagram.
Select "File » Save All (this Project)"
Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Notice there is no problem, which is surprising as there should be an error since the Dependencies item hasn't been tidied.
Close the new VI and remove it from the project.
Select "File » Save All (this Project)"
Open "OpenProject.lvproj" in a text editor.
Notice the Dependencies item has been tidied.
Re-add the VI back to the project.
Select "File » Save All (this Project)"
Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Notice there is an error again, as is expected.
Solved!
Go to Solution.
Attachments:
LVRTE_OpenProject.zip ‏10 KB

NInjaneer_wow wrote:
The same behavior occurs in LabVIEW RTE: a new project with an Application Directory constant in a blank vi will return error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.
I've been experimenting with workarounds for this behavior, and I found one.
When I provide the LabVIEW path for libdir in my executable's ini file, the run-time is able to load and inspect the project file.
libdir="C:\Program Files\National Instruments\LabVIEW 2013"
While it's expected that a stand-alone executable may be placed on a system that doesn't have the LabVIEW IDE, it's still surprising to me that the Run-Time Engine cannot find LabVIEW's standard library without some explicit guidance. What other considerations contribute to that behavior?
References:
LabVIEW configuration file/Paths -- http://labviewwiki.org/LabVIEW_configuration_file/Paths

Cannot open projects in FCP - "General Error"

Well, just upgraded to OS 10.4.10, and FCP to 5.1 on my 867 quicksilver. several external lacie hard drives. 1.5 GB ram. after the archive and install of the OS, I could not open projects in FCP 4.5 due "General Error". I upgraded to FCP 5.1 and experience same issue.
at the time of OS upgrade, i also changed my second internal drive for a larger one, and put the original one, with its original name, in an external firewire housing. It appears on my desktop and is included in the FCP system preferences, so i assume that is not a problem.
any ideas?

I updates to 5.1.4, and issue turned into "project file unreadable or from more recent version of FCP" when file is actually from older version. THIS problem was solved by disconnecting all external drives, opening 4.5 project and updating to 5.1.4, reconnecting and setting external drives in FCP system pref, and then reconnecting media.
I have had this problem also happen with a project i already successfully opened in 5.1.4 ...turns out i had opened it with some network drives on my desktop and then removed them. I put one back, it opened successfully, I got rid of the network drive and resaved and now it opens fine. In other words the message "project unreadable or from a later version of Final Cut" really indicates there is some drive rooting problem, not a problem with project file or what generation it is.
hope that helps anyone out there. sure is a relief to be working again.

Cannot open projects or import custom skins into RH*

Hi,
I just got a new laptop and I'm unable to open ANY projects or import custom skins into RH8. I was on 8 previously, but I cannot open my projects nor can I import skins. I click on Skins>import>choose the skin, then nothing. It's like it's not even recognizing I'm doing anything. Any suggestions?
Thanks!

If you can't open a project, how are you getting to the File > Import > Skin menu item? Also can you give us some additional information about the laptop (e.g. the OS).
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

URGENT HELP : CANNOT ACCESS FILES/FOLDERS in my IPOD :(

Folks,
Two days back, i dropped my IPOD Video and since then it has gone nuts. I used to use it as storage device and have around 70 GB of data stored in it. Now when i connect my IPOD video to my PC through USB cable, though i can see the folders i cannot open the files or folders. it says following on the pop up - cannot open and read the file.
also all my videos and mp4 songs have been deleted from my ipod. god knows how.
can someone help

Dropping the iPod might have caused the reason into this problem. For what I do is I keep my set of music & videos into a seperate USB flash and computer. I'm not an iPod expert but you might want to have it fixed at a local store that can fix iPods. Look into the apple website to find further instructions. For the worse, you probably will lose your files.

I cannot open project; do I start all over, or is there hope?

So I have started doing video podcasts and am using iMovie '11 for editing the footage.
I exported my first episode which turned out to be around 18 min total. When I watched it to verify, the audio started becoming out of sync with the video. It got progressively worse. Searching these forums and the Internet, I found other users were noticing the same problem. One workaround was to extract the audio from each and every clip. I tried this and it worked. The exported movie had no video/audio sync problems. So I thought that would be my workflow.
Then I started working on my second episode. It turned out to be a long one clocking in at an hour and 45 min. It consisted of some complicated edits and a very large number of separate clips. I started my tedious workflow and workaround of extracting the audio from each and every clip so the exported movie would have video/audio in sync. The process got progressively slower and slower. At some point about halfway through, when I right clicked on an clip to extract the audio, the spinning beach ball came up and iMovie hung. I restarted and tried again, but the same result. When I restarted again, iMovie would not start. I can double click my first episode project and open it, but the second episode will not load; well, it will load sometimes, but if I do anything with it, including just moving the mouse, spinning beach ball and hung. Searching the Internet, I found recommendations to clear the cache and plist. This didn't help any for me. Sometimes, iMovie will hang when I simply select the project in my project library; sometimes, I can select the project and quickly get to the menus. I tried doing this and duplicating the project, but the duplicated project showed the same symptoms.
Unfortunately, I did not keep backups and I don't know why I didn't with such a large project. I've learned my lesson.
Question: Is there any hope of getting the project to a state where I can salvage it? Anyway to reattach the audio outside of iMovie or something?
I also realize now that iMovie is probably not meant for such large, complex projects. But, the video/audio sync issue doesn't seem to be that hard to reproduce. I have submitted feedback for that.
If I decide to continue using iMovie, I am going to add to my workflow that a project cannot be over x minutes long, export the parts, and combine them with Quicktime.
Question: Are there recommended guidelines for a single project's complexity or length?
I am hoping for some answers here; otherwise, I guess I'll have to start all over and spend the next two days re-editing.

I have the exact same problem here Jason, only in my case the project is merely 15 mins long...
I noticed the audio sync issues on exported files (needed it as a QT HD to play in front of a whole school assembly) about half way through the audio would go miles out - well over a minute adrift.
Having read some posts I decided to detach the audio as you did, it let me do this for a while then about half way through I got the beach ball and likewise I'm now stuck with an urgent essential project that I can't do anything with. This is on a brand new 27" i7 iMac with all the updates, and no other projects. It's like the dark days of Pinnacle on windows, I thought this stuff was supposed to just work!
Does anyone have any suggestions on a fix - I've repaired permissions, tried trashing the iMovie prefs etc but it still hangs every time.

Urgent HELP cannot open project

Similar Messages

Maybe you are looking for