Urgent Help; Everyone has access to restricted rooms

Hi Everybody,
I need some urgent help.
I have created some collaboration rooms based on a restricted room template and everyone seems to have access to the room.
It is behaving as if it is a public room.
Now we are just a couple of days from go-live and it is extremely urgent to resolve these issues.
Any help would be appropriately rewarded.
Regards,
Vibhu

Hi Vibhu,
you should check the room role assignments and page
permissions. You need to log in as a room administrator
and go to the "Admin: Room" page.
Regards,
Darin

Similar Messages

  • I need some help, somebody has turned the restrictions on on my daughters  iPad mini and we don't know the pass code to turn it off.  She has lost the iTunes icon because of this.  Anybody know what to do?  Thanks

    Help, somebody has turned the restrictions on on my daughters iPad mini and we don't know the pass code to turn it off. She can't use iTunes because of them being turned on.  I have tried backing it up to a laptop and then restoring it to factory settings but you need the pass code to do this....any ideas how I can turn it off or reset it, anything that might help its driving me potty...
    Many thanks
    Jo

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Urgent Help with network access to FileOutputStream

    URGENT HELP NEEDED GUYS...I am stuck on this past 2 days. I tried several alternatives but to vain.
    I am trying to access a Folder on a user's computer which is lying in a different Domain.
    For accessing this folder, I have the following information with me.
    Domain name, PC name, folder name, windows username, windows password.
    Note: This username and password will give me rights to read + write to that folder.
    How to use these information to open a fileoutputstream ? Does the java.io package allow programs to pass a username, password , domainname, pcname and then the folder and filename to create/read/write files..
    Pls. suggest code examples. Sometime back I posted this query but didnt get an answer to my satisfaction. I have tried at my end but unsuccessful yet. Help would be appreciated.
    I am trying this on a Windows File System and Network domain
    THIS IS V. URGENT
    Thanks,

    Hi HJK,
    I am referring to the last reply of yours.
    " Hi, there are three approaches I can think of offhand:
    1) make sure the user-context under which you run the java app has the right to access the remote drive.
    2) Do the network connection in a batch or c program and call that at the start of your java app with Runtime#exec.
    3) Write some c/c++ code to open the connection and integrate that via JNI.
    Let me know what (other) solution you came up with in the end!
    Regarding the 1st.
    I am supposed to write a remote installation utility actually. There are around 200 PC(s) in a network on which I need to copy these java class files. My problem statement is such that at runtime I only have username, passwords, domain access. I am not supposed to map any drives. Its supposed to be done dynamically. No manual intervention required. :(
    How do I do the network connection in a batch mode ? Let me know that?
    If 2nd option can be done, probably I can think of action-3 at the moment I am quite blurr :(

  • Urgent Help needed : Connecting Access 2000 with forms 6i

    Dear friends,
    I am really struggling to solve this connection issue. I am working with forms 6i, oracle 8i, in Windows XP pro environment. Developing programs using oracle 8i tables is ok, but there are tables in Access 2000, which I have to add the program that I am developing. The things I have done are
    - I have already tables in MS Access databse.
    - I Installed ODBC for microsoft and for Oracle as well(which . I added the MS Access Database there and I can perfom SQL from Oracle ODBC.
    - I also installed OCA for developer from the CD.
    From this point I followed the instructions in Developer Help menu and I was not able to connect and still trying, I will appreciate if anyone provide me sometips. Thanks in advance
    Best Regards

    Hi,
    I know the bad solution. But anyway, I'll tell you in any kind of help. I also had an AccessControlException when I started a RMI client program using JFileChooser. I rewrote policy files again and agin, but in vain. The last and ultimate method I did was remove the RMISecurityManager. This is obviously dangerous in the Internet, but if you use your application in the intranet or in some kind of safe environment. There would be no problem.
    Hope this could be any kind of your help.

  • Urgent help -can not access Documents (windows 7)

    After some one renamed one profile and my documents (roaming profile and my documents redirected to network path too through group policy).  Now , I can not open Documents.  I got this message: "can't open this item  It might have been
    moved, renamed, or deleted.  Do you want to remove this item?"
    Thank you.

    After some one renamed one profile and my documents (roaming profile and my documents redirected to network path too through group policy).  Now , I can not open Documents.
    Since you have a roaming profile, you must be connected to a Windows server. If so then you should discuss this problem with your network administrator.

  • My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

    My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls  urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

    Hi there,
    Use the method described in the link below to get back up and running:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • HT201304 It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.

    Please help!
    It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device, to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.
    I understand that I can set up a different Apple ID for the kids devices, or take physical control of the device and make the changes myself. However, my teenage son is technically savvy enough to have a job in Silicon Valley, as are most young people these days. However, in order to access his devices the current way, I first have to bypass the four digit pass code. This starts a fight of why I need in the device and continues to escalate. The argument that I am the parent will gain access but the fight is simply exhausting, and quite frankly shouldn't have to happen at all. He is not yet an adult, he did not pay for his iPad or iPhone and I, as a parent, should have not only have the right to change options at will, and from anywhere, but look at history or current activity when I feel like it.
    I currently have the settings where app and in-app purchases require my password to be put in, and he must come to me to type it in, but I need more control and would like, and should be able to access any of our six devices and make individual changes simply by logging in to my account, with my password.
    If I can see all my devices on the "Lost My iPhone" app, this technology should be easy to make happen.
    C'mon parents! I have a pretty good kid, given all things that they can get into, but I am not stupid. For everything I see has been done, there is much more I haven't seen. I want my children to be kept safe and be able to know what they are looking at or listening to. We parents are the only ones who know our beliefs and what our kids can handle and when.
    Thanks for any support or information that I may be missing in order to fulfill my request.

    There are mobile device management solutions that can do this, including in Apple's OS X Server system, but most parents generally find that setting this up is more work than it's worth. If you're interested, though, there are a couple that at least purport to be free (I don't know if there are any hidden "gotchas"):
    http://www.unwireddevicelink.com/features/
    https://meraki.cisco.com/products/systems-manager
    and Apple's system:
    http://www.apple.com/osx/server/features/#profile-manager
    I don't think any, however, allow you to see current activity or browser history. iOS doesn't expose those to access from MDM solutions, to the best of my knowledge.
    Regards.

  • Implementation Restriction 'DBMS_LOB.READWRITE'  Urgent Help

    *"Implementation Restriction 'DBMS_LOB.READWRITE' Cannot directly access remote package variable or cursor"*
    Hello,
    I need urgent help in implementing DBMS_LOB package.
    I need to write data in LOB object using DBMS_LOB object
    following code is written in PRE-UPDATE Trigger for the block CTX
    on the form i have taken Clob_Desc_f as non database field of type CHAR(26000)
    After querying the data I change Clob_Desc_f and enter the new data when saved it shoud empty the lob field based on the key value with empty lob
    and then write the data into lob
    DECLARE
    w_Description_Clob CLOB;
    BEGIN
    Here Clob_Desc is the lob field in table cxt
    UPDATE Cxt
    SET Clob_Desc = Empty_Clob()
    WHERE Cxt.Key_Field = :Cxt.Key_Field RETURNING Clob_Desc INTO
    w_Description_Clob;
    Dbms_Lob.OPEN(w_Description_Clob, Dbms_Lob.Lob_Readwrite);
    Dbms_Lob.WRITE(w_Description_Clob
    ,Length(:Cxt.Clob_Desc_f)
    ,1
    ,:Cxt.Clob_Desc_f
    Dbms_Lob.CLOSE(w_Description_Clob);
    END;
    The above code gives error saying
    *1] RETURNING clause is not supported in client-side program.*
    *2] For the statement*
    Dbms_Lob.OPEN(w_Description_Clob, Dbms_Lob.Lob_Readwrite);
    gives error as " Implementation Restriction Dbms_Lob.Lob_Readwrite : Cannot directly access remote package variable."
    How can I use Dbms_Lob.OPEN
    Thanks in advance.
    Regards,
    Sourabh

    Hello,
    Here is the constants you can use directly:
    * file_readonly CONSTANT BINARY_INTEGER := 0;
    * lob_readonly CONSTANT BINARY_INTEGER := 0;
    * lob_readwrite CONSTANT BINARY_INTEGER := 1;
    * lobmaxsize CONSTANT INTEGER := 4294967295;
    * call CONSTANT PLS_INTEGER := 12;
    * session CONSTANT PLS_INTEGER := 10;
    * warn_inconvertible_char CONSTANT INTEGER := 1;
    * default_csid CONSTANT INTEGER := 0;
    * default_lang_ctx CONSTANT INTEGER := 0;
    * no_warning CONSTANT INTEGER := 0;
    10g
    * file_readonly CONSTANT BINARY_INTEGER := 0;
    * lob_readonly CONSTANT BINARY_INTEGER := 0;
    * lob_readwrite CONSTANT BINARY_INTEGER := 1;
    * lobmaxsize CONSTANT INTEGER := 18446744073709551615;
    * call CONSTANT PLS_INTEGER := 12;
    * session CONSTANT PLS_INTEGER := 10;
    * warn_inconvertible_char CONSTANT INTEGER := 1;
    * default_csid CONSTANT INTEGER := 0;
    * default_lang_ctx CONSTANT INTEGER := 0;
    * no_warning CONSTANT INTEGER := 0;
    Francois

  • Restricting user search to the communities the user has access to

    We want to be able to restrict our users to search within the community that user is in or to the communities that user has access to.
    A global portal search is not acceptable. Could someone help me with this. We are running portal 6.0sp1 on solaris.
    Thanks!
    Jamal Najmi

    Hi Jamal Najmi,
    If you have KD hierarchy based on community, then you develop a small search portlet using adaptive tags that will search only those folders in the KD.
    Hope this helps.
    Bharat

  • Once 10.9.1 is loaded onto my MacBook Pro and it has accessed all my files; is there anyway to back out of the relationship?  I don't want my data on iCloud - how do I make that happen?  Many thanks for any help.

    Once 10.9.1 is loaded onto my MacBook Pro and it has accessed all my files; is there anyway to back out of the relationship?  I don't want my data on iCloud - how do I make that happen?  Many thanks for any help.

    Sorry but I know of no way of not backing up for a PC.

  • JNDI NIS object access problem: urgent help

    Hi all,
    After long fight, i'm now able to connect to my NIS server on my network. the initial context factory is 'com.sun.jndi.nis.NISCtxFactory' and provider url are given and i obtain namingennumeration of items in the NIS directory.
    purpose of my project:
    using ypcat command we can view the services,passwd,host... objects in unix.
    my project requirement is that i shd open this 'services' object in java (using JNDI probably) and shd access its content.
    i'm able to obtain the object and the type of this object is 'NISCtxServices' defined in 'com.sun.jndi.nis.NISCtxFactory' package, but all the classes and methods except some are not public and so im not able to use almost all the methods in this class 'NISCtxServices' .
    Can any one help me in accessing the information inside this object.
    Thanks in advance! and i'm waiting!

    It's because JFrame does not have a public progessbar variable, only your subclass has that.
    //change this
    JFrame frame = new ProgressBarDemo();
    //to this
    ProgressBarDemo frame = new ProgressBarDemo();

  • Unable to access restricted rooms

    Hi All,
    Recently we have configured multiple domains on portal, we are able to access all room  fucntionality from old domain but from new domain we are unable to access restricted rooms neither a owner nor a member.
    We are getting room name and this is your first visit. Any idea ? full points will be awarded for the right answer.
    Regards,
    Sreedhar G

    Hi sreedhar Gunda,
    Your question is not clear. Are you like to use the room created in old domain or saying about functionalities of the restricted room?
    Provide clear view about your requirement.
    Regards,
    Kathiresan R

  • Need help with thinkvantage access connection

    Here a log file with new access connection:
    Connection status:  Disconnected
    Cause:  Driver disconnected while associating.
    Error code:  229378
    Recommended actions:
    Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
    Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
    If the problem persists, contact your network administrator and provide the troubleshooting information below.
    Adapter Details
    Adapter name  11a/b/g Wireless LAN Mini PCI Express Adapter                  
    Adapter type  Wireless LAN                                                   
    Adapter speed  54.0 Mbps                                                      
    Driver/Firmware version  7.6.0.96/ N/A                                                  
    Adapter status  Enabled                                                        
    Connection Status  Disconnected                                                   
    Disable unused cards?  Yes                                                            
    TCP/IP Settings
    DHCP enabled?  Yes                                                            
    Append parent suffixes of the primary DNS suffix?  Yes                                                            
    Register connection's DNS suffix in registration?  Yes                                                            
    Register connection's DNS suffix in DNS registration?  Yes                                                            
    Enable LMHOSTS Lookup?  No                                                             
    NetBIOS setting  "Default"                                                      
    Wireless Settings
    Network name (SSID)  linksys                                                        
    Connection type  Access point                                                   
    Wireless mode  Auto                                                           
    Security encryption  None                                                           
    System Information
    System model  7732CTO                                                        
    BIOS version  7LETB7WW (2.17 )                                               
    Operating system version  Windows Vista,  Service pack 2                                 
    Access connections version  5.31                                                           
    Access Point scan list
    Network name (SSID)              Wireless mode  MAC address                   Signal strength Channel
    linksys                          802.11g        00:1C:10:54:65:B6              24%            11
    Global Settings
    Network
     Allow all users of this system to switch to any existing location profile  -> No
     Allow the wireless LAN radio to be turned off when inactive  -> No
     Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
     Enable autodeletion of unused profiles  -> Yes
    Notifications
     Show ThinkVantage Access Connections status icon in task tray  -> No
     Show wireless status icon in task tray  -> No
     Display the progress indicator window when a profile is being applied  -> Yes
    Preferences
     Enable sound effects  -> Yes
     Do not show balloon tips from the Access Connections system tray icon  -> Yes
     Show WiMAX page as default on Main GUI  -> No
    Automatic location profile switching list
     Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> Yes
     When no other connections are available, connect through Wireless WAN or WiMAX  -> No
    Wireless priority list
    Selection    Priority     Location profile name                                            Connection order                 Connection details             
    No                  1     linksys                                                          Wireless LAN                     SSID: linksys                  
    Log File
    Debug Log is enabled
    It didn't happen when I use old version. Can anybody help me?

    Are you getting any error message while connecting to ds..?
    Are you able to go online on wired computer...?
    Are you able to go online on any wireless computer on your network..?
    Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings... 
    Now,check.

  • All the devices in our home are in my name, yet everyone has a different email iD, why are we seeing each other's mail?

    I purchased all the devices in my name. When I set up iCloud, though everyone has a different email account, everyone is getting my mail because iCloud is under my name. My wife has a different email account with ".me" she can see my email and hers when she clicks on "iCloud." What must I do so that we both have access to iCloud and we can see only each other's mail? This gets tricky if she accidentally deletes messages of mine which just occurred.
    Do we need to open her up a separate iCloud account? How would I take the MAC that I purchased for her and register it in her name so iCloud knows that it is her?
    I really appreciate you help on this one.
    GH36c

    Have a look here...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • No more connections available to this remote computer...Urgent Help for File server...

    Hi Guys,
    I need urgent help regards to our school File server which is having "No more connection to this remote computer error"
    on SMB Shares where I usually authenticate with a domain username it used to work fine since till 3 weeks ago.
    Now I can browse the SMB shares with only IP... Netbios gets straight away this error message from non-domain joined pc's where the computer needs to connect to the SCCM distribution point on this file server.
    Strangely, Domain joined pc's does not have this problem at all they can use Netbios or IP no problem at all. But someone from a standalone laptop or desktop who needs to access shares through netbios gets this message.
    Can someone help me please?
    I did check DNS yet there is no problem on DNS I checked PTR record for the server to make sure it is not turned in to multihome accidently but nothing at all.
    I also did a NETMON where I captured the data from server and the client I get these errors:
    205 4:54:35 PM 16/12/2013
    7.3299179 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=......S., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710719, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
    {TCP:22, IPv4:21}
    206 4:54:35 PM 16/12/2013
    7.3299668 10.2.0.13
    10.2.1.96 TCP
    TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49312, PayloadLen=0, Seq=2167618331, Ack=1771710720, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
    {TCP:22, IPv4:21}
    207 4:54:35 PM 16/12/2013
    7.3301468 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=...A...., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710720, Ack=2167618332, Win=16425 (scale factor 0x2) = 65700
    {TCP:22, IPv4:21}
    208 4:54:35 PM 16/12/2013
    7.3301468 10.2.1.96
    10.2.0.13 SMB
    SMB:C; Negotiate, Dialect = PC NETWORK PROGRAM 1.0, LANMAN1.0, Windows for Workgroups 3.1a, LM1.2X002, LANMAN2.1, NT LM 0.12, SMB 2.002, SMB 2.???
    {SMBOverTCP:23, TCP:22, IPv4:21}
    209 4:54:35 PM 16/12/2013
    7.3307974 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R   NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
    {SMBOverTCP:23, TCP:22, IPv4:21}
    210 4:54:35 PM 16/12/2013
    7.3314064 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
    211 4:54:35 PM 16/12/2013
    7.3318815 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R  - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED  SESSION SETUP (0x1), SessionFlags=0x0
    {SMBOverTCP:23, TCP:22, IPv4:21}
    212 4:54:35 PM 16/12/2013
    7.3324012 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
    215 4:54:35 PM 16/12/2013
    7.3339977 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R  - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE  SESSION SETUP (0x1)  
    {SMBOverTCP:23, TCP:22, IPv4:21}
    216 4:54:35 PM 16/12/2013
    7.3341805 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=...A.R.., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771711788, Ack=2167619070, Win=0 (scale factor 0x2) = 0
    {TCP:22, IPv4:21}
    217 4:54:35 PM 16/12/2013
    7.3357089 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=......S., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201172, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
    {TCP:27, IPv4:21}
    218 4:54:35 PM 16/12/2013
    7.3357422 10.2.0.13
    10.2.1.96 TCP
    TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49313, PayloadLen=0, Seq=3718656547, Ack=2943201173, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
    {TCP:27, IPv4:21}
    219 4:54:35 PM 16/12/2013
    7.3359768 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=...A...., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201173, Ack=3718656548, Win=16425 (scale factor 0x2) = 65700
    {TCP:27, IPv4:21}
    220 4:54:35 PM 16/12/2013
    7.3359768 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   NEGOTIATE (0x0), GUID={8213462D-2600-D1B1-11E3-65FC4BCDE707}
    {SMBOverTCP:28, TCP:27, IPv4:21}
    221 4:54:35 PM 16/12/2013
    7.3364173 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R   NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
    {SMBOverTCP:28, TCP:27, IPv4:21}
    222 4:54:35 PM 16/12/2013
    7.3369702 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
    223 4:54:35 PM 16/12/2013
    7.3373474 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R  - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED  SESSION SETUP (0x1), SessionFlags=0x0
    {SMBOverTCP:28, TCP:27, IPv4:21}
    224 4:54:35 PM 16/12/2013
    7.3377060 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
    227 4:54:35 PM 16/12/2013
    7.3390552 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R  - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE  SESSION SETUP (0x1)  
    {SMBOverTCP:28, TCP:27, IPv4:21}
    Regards,
    Gokhan

    Solution has been found, 
    After doing bit of a backtrack, site DC's were out of sync with PDC with time.
    Also Time service was shutdown on PDC which has been enabled and pointed to the Australian pool ntp IP address.
    Everything is back on track now.
    Regards,
    Gokhan Cil

Maybe you are looking for

  • Printer Sharing

    I just bought my first Apple. Yeah! I am trying to set up the printer that is connected through a USB to my MAC mini to be able to share with my windows laptop. I have gone through the steps to share the printer as well as files. My laptop now recogn

  • CSS and Spry not displaying

    Hi, I have recently created a website using Dreamweaver. I don't know much coding at all so I did it using the design view. It is a very basic site. Just one page, styled with CSS and with Spry Tabbed Panels to reveal 4 different 'pages' I have uploa

  • Problem in Frame and JSP

    hi all, i built an web application and now i want to add a menu using frame in HTML or javascript. The problem is all my JSP pages are data dependant from one another that means sometimes i am sending the data using input boxes and sometimes using HI

  • Nevada: SOL & Old Charge Off

    Hey all, and pardon me in advance for my ignorance. Long long time lurker, minimal poster. I have a U.S. Bank C/O which was charged off in 12/2011. On myfico it only shows my payment history back to 1/2010, in which it hasn't been paid. I left US BAN

  • Query the date field for specific time

    I need to be able to run a query on a date field that retrieves specified times. Any ideas???