Urgent Help for Run Report

after creating a button in form builder 9i i want to fire a tigger for execute the report which is built in report builder 9i but it is not executing and showing me these errors..
code behind tigger of button is
Declare
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
Begin
repid := FIND_REPORT_OBJECT( ' c:\rsoreport.rep ' );
or ( ' rsoreport.jsp ' );
or ( ' rsoreport ' );
v_rep := RUN_REPORT_OBJECT(repid);
End;
error = FRM-41219 : Cannot find the Report: invalid id; on Form
and on Status bar Run_Report_Object cannot be null.
i need to execute the report behind form button so if any one know the simple code for this or tell me my code mistake then i would be very thanfull to him

You need to post this in forms forum. But you can check this. It has example how to run report from forms.
http://www.oracle.com/technology/products/forms/pdf/frm9isrw9i.pdf

Similar Messages

  • What is the best UI for running reports?

    Based on my experience,  am I correct in assuming the Silverlight UI is still the only one supported for running reports?
    Running reports in the html5 UI is not a comparable experience at all.... yet .
    Which UI do you use for your implementation?

    I agree 100%... HTML5 UI for Reports is very clunky, slower and not intuitive when Silverlight's is much better.
    We actually use the Excel Add-In a lot now, we just build the report's shell in C4C quickly and then do our View/Selection customization in Excel. We find it quite fast and everyone knows how to play with Excel reports quickly.
    Since 1402 I believe, the user-experience in the iPad app SAP Customer Insight is also much better with the introduction of dashboards in HTML5 though.
    JB.

  • Little help for calling report from a form

    hi,
    I AM NOT ABLE TO CALL THE REPORT WITH THE FOLLOWING CODE. PLEASE TELL ME WHERE I AM DOING WRONG! THANKS A LOT!!
    It is Oracle 9i and Reports 6i.
    -> I have a form with only one BUTTON.
    -> I have a REPORT with only one USER PARAMETER 'P_1' which is a number.
    -> I have only one query INSIDE the report. It is "SELECT * FROM EMP WHERE EMPNO = :P_1'
    -> I added the report to form in the OBJECT NAVAVIGATOR of FORM and the NAME OF REPORT is 'REOPRT4'
    here is the code on the form:
    ================================
    When_button_pressed
    DECLARE
    vid report_object;
    vname varchar2(100);
    BEGIN
    vid := find_report_object('Report4');
    vname := run_report_object(vid);
    END;
    ==================================
    -> the FORM and REPORT are in "c:\helloworld" directory.
    -> the error I am getting is 'internal pl/sql error'
    -> I WANT THE USER TO ENTER THE RUNTIME PARAMETER FOR THE REPORT AT RUNTIME, so no need to worry about supplying the parameter through code!!!
    Thank You very much. I appreciate your kind help!!

    I think that you have to add some code, see page 15 in this:
    http://otn.oracle.com/products/forms/pdf/277282.pdf
    Helena

  • How to create a F4 help for a report selection screen field

    hi,
    can any one guide me to create F4 help for a field in a selection screen in a report program,plz give me a sample code

    hi,
    Here are the following ways
    1.with the help of match code objects we can create the F4 Functionality for Field.
    Syntax is :
    PARAMETERS: p_org LIKE t527x-orgeh MATCHCODE OBJECT zorg.
    2. One more thing is we can do it with Search Help's also.
    3. Even we can do it HELP Views also.
    Help Views:
    You have to create a help view if a view with outer join is needed as selection method of a search help
    The selection method of a search help is either a table or a view. If you have to select data from several tables for the search help, you should generally use a database view as selection method. However, a database view always implements an inner join. If you need a view with outer join for the data selection, you have to use a help view as selection method.
    All the tables included in a help view must be linked with foreign keys. Only foreign keys that have certain attributes can be used here. The first table to be inserted in the help view is called the primary table of the help view. The tables added to this primary table with foreign keys are called secondary tables.
    The functionality of a help view has changed significantly between Release 3.0 and Release 4.0. In Release 3.0, a help view was automatically displayed for the input help (F4 help) for all the fields that were checked against the primary table of the help view. This is no longer the case in Release 4.0.
    As of Release 4.0, you must explicitly create a search help that must be linked with the fields for which it is offered (see Linking Search Helps with Screen Fields ).
    Existing help views are automatically migrated to search helps when you upgrade to a release higher than 4.0.
    A help view implements an outer join, i.e. all the contents of the primary table of the help view are always displayed. You therefore should not formulate a selection condition for fields in one of the secondary tables of the help view. If records of these secondary tables cannot be read as a result of this selection condition, the contents of the corresponding fields of the secondary table are displayed with initial value.
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:15 PM

  • No more connections available to this remote computer...Urgent Help for File server...

    Hi Guys,
    I need urgent help regards to our school File server which is having "No more connection to this remote computer error"
    on SMB Shares where I usually authenticate with a domain username it used to work fine since till 3 weeks ago.
    Now I can browse the SMB shares with only IP... Netbios gets straight away this error message from non-domain joined pc's where the computer needs to connect to the SCCM distribution point on this file server.
    Strangely, Domain joined pc's does not have this problem at all they can use Netbios or IP no problem at all. But someone from a standalone laptop or desktop who needs to access shares through netbios gets this message.
    Can someone help me please?
    I did check DNS yet there is no problem on DNS I checked PTR record for the server to make sure it is not turned in to multihome accidently but nothing at all.
    I also did a NETMON where I captured the data from server and the client I get these errors:
    205 4:54:35 PM 16/12/2013
    7.3299179 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=......S., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710719, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
    {TCP:22, IPv4:21}
    206 4:54:35 PM 16/12/2013
    7.3299668 10.2.0.13
    10.2.1.96 TCP
    TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49312, PayloadLen=0, Seq=2167618331, Ack=1771710720, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
    {TCP:22, IPv4:21}
    207 4:54:35 PM 16/12/2013
    7.3301468 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=...A...., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710720, Ack=2167618332, Win=16425 (scale factor 0x2) = 65700
    {TCP:22, IPv4:21}
    208 4:54:35 PM 16/12/2013
    7.3301468 10.2.1.96
    10.2.0.13 SMB
    SMB:C; Negotiate, Dialect = PC NETWORK PROGRAM 1.0, LANMAN1.0, Windows for Workgroups 3.1a, LM1.2X002, LANMAN2.1, NT LM 0.12, SMB 2.002, SMB 2.???
    {SMBOverTCP:23, TCP:22, IPv4:21}
    209 4:54:35 PM 16/12/2013
    7.3307974 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R   NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
    {SMBOverTCP:23, TCP:22, IPv4:21}
    210 4:54:35 PM 16/12/2013
    7.3314064 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
    211 4:54:35 PM 16/12/2013
    7.3318815 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R  - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED  SESSION SETUP (0x1), SessionFlags=0x0
    {SMBOverTCP:23, TCP:22, IPv4:21}
    212 4:54:35 PM 16/12/2013
    7.3324012 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
    215 4:54:35 PM 16/12/2013
    7.3339977 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R  - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE  SESSION SETUP (0x1)  
    {SMBOverTCP:23, TCP:22, IPv4:21}
    216 4:54:35 PM 16/12/2013
    7.3341805 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=...A.R.., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771711788, Ack=2167619070, Win=0 (scale factor 0x2) = 0
    {TCP:22, IPv4:21}
    217 4:54:35 PM 16/12/2013
    7.3357089 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=......S., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201172, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
    {TCP:27, IPv4:21}
    218 4:54:35 PM 16/12/2013
    7.3357422 10.2.0.13
    10.2.1.96 TCP
    TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49313, PayloadLen=0, Seq=3718656547, Ack=2943201173, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
    {TCP:27, IPv4:21}
    219 4:54:35 PM 16/12/2013
    7.3359768 10.2.1.96
    10.2.0.13 TCP
    TCP:Flags=...A...., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201173, Ack=3718656548, Win=16425 (scale factor 0x2) = 65700
    {TCP:27, IPv4:21}
    220 4:54:35 PM 16/12/2013
    7.3359768 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   NEGOTIATE (0x0), GUID={8213462D-2600-D1B1-11E3-65FC4BCDE707}
    {SMBOverTCP:28, TCP:27, IPv4:21}
    221 4:54:35 PM 16/12/2013
    7.3364173 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R   NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
    {SMBOverTCP:28, TCP:27, IPv4:21}
    222 4:54:35 PM 16/12/2013
    7.3369702 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
    223 4:54:35 PM 16/12/2013
    7.3373474 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R  - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED  SESSION SETUP (0x1), SessionFlags=0x0
    {SMBOverTCP:28, TCP:27, IPv4:21}
    224 4:54:35 PM 16/12/2013
    7.3377060 10.2.1.96
    10.2.0.13 SMB2
    SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
    227 4:54:35 PM 16/12/2013
    7.3390552 10.2.0.13
    10.2.1.96 SMB2
    SMB2:R  - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE  SESSION SETUP (0x1)  
    {SMBOverTCP:28, TCP:27, IPv4:21}
    Regards,
    Gokhan

    Solution has been found, 
    After doing bit of a backtrack, site DC's were out of sync with PDC with time.
    Also Time service was shutdown on PDC which has been enabled and pointed to the Australian pool ntp IP address.
    Everything is back on track now.
    Regards,
    Gokhan Cil

  • HELP FOR RUN PHOTOSHOP IN COMMAND PROMPT AND OPEN FILE

    HELLO
    i have problem for run photoshop in cmd(command prompt) and
    open a file immediate
    for example:
    D:\Program Files\Adobe\Photoshop CS>Photoshop.exe -open -f:\1.jpg
    but these not answer
    I need parameter open in photoshop
    please help me
    thanks

    I would right click on 1.jpg. Select Open with... Select Choose default program... Pick Photoshop and make sure you check "always use the selected program to open this kind of file."
    D:\1.jpg
    Would then open photoshop.

  • Need urgently help for OBIEE Installation (11g)

    Hi all,
    I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
    The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
    The log under the Inventory directory shows me only following:
    INFO: Ending the inventory Session
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
    I need urgently help. I would appreciate someone could help me.
    We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
    I hope to find the help I need. I am desperated :-(

    Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
    would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
    Thanks,
    JD

  • Tcode for run reports

    which SAP tcode can be used to run  reports to list the display for parts current source list supplier and most update infro record price?

    Hi,
    Check in tables,
    RSZELTDIR Directory of the reporting component elements
    RSZELTTXT Texts of reporting component elements
    RSZELTXREF Directory of query element references
    RSRREPDIR Directory of all reports (Query GENUNIID)
    RSZCOMPDIR Directory of reporting components
    RSZRANGE Selection specification for an element
    RSZSELECT Selection properties of an element
    RSZELTDIR Directory of the reporting component elements
    RSZCOMPIC Assignment reuseable component <-> InfoCube
    RSZELTPRIO Priorities with element collisions
    RSZELTPROP Element properties (settings)
    RSZELTATTR Attribute selection per dimension element
    RSZCALC Definition of a formula element
    RSZCEL Query Designer: Directory of Cells
    RSZGLOBV Global Variables in Reporting
    Thanks
    Reddy

  • Help for design report layout

    Hi all,
    Could you tell me any tools for design report layout or other way to design? Beside Quick Viewer, SAP Query, Report Painter/Writer, they can't group data and very complex.
    Thank you!

    Use transaction GR11 GR12 GR13 to create and change layout.

  • Urgent Help Required In Reports 6i for 11.5.10

    we have a scenario where we have nested repeating frames. whenever we are trying to run the report we are getting the following error
    REP-1219: 'R_Comp_Int_Comp' has no size -- length or width is zero.
    please help me to solve the error. we are running this report in oracle applications 11.5.10.
    any kind of help will be highly appreciated.

    Hi,
    Please check the height and width of the frame not to be less than the items enclosing.
    Check VERTICAL and HORIZONTAL elasticity properties of the frame.
    Check if the current frame is crossing its parent frame of illegal anchoring with other objects.
    Last oprtio, is always best.
    Delete this frame and re-create it.
    Cheers
    Ram Kanala

  • Really urgent: help in making report for status of vendor payement

    Hi,
    I am making a report in which i have to display the status of vendor whether it is paid or not?
    Till now i am able to have knowledge that when we do MIGO there are the Financial Documents form there i get the account no.. whichit is stored in the BKPF table. From there we have the account no... and after that there are 4 tables into which i have to look after the tables i.e. BSAS,BSIK,BSIS, n BSAK.
    Plzz tell me how should i make a report as the Acount no.. have to move among these tables to get the status of it pament.
    plzz provide me some guidelines for making a report for it as help will be deifnately rewarded.
    Edited by: abaper2008 on May 21, 2008 6:52 AM

    Hi,
    Hi,
    I making a report in which i have to display the vendor payment is done or not?
    Curently i am using the 4 tables of Financial :-
    BSAK,BSIS,BSIK AND BSAS which gives the status of vendor whether it is paid or not . 1 thing i observed that data compared wit htew MKPF table among these tables(BSAS,BSIK N BSAK) is not coming right as i am taking common field XBLNR among them all .
    One more thing i observed that BLART is getting changed in each table.
    for instance,
    if the BLART is WE for material document and i am taking XBLNR filed from this table MKPF and den looking XBLNR in BKPF where the entry consist of BLART - RE n WE and finally when i look up in the BSAK table the field consist of RE .
    How can i see that it is being paid or not the BLART is keep on changing.
    Plzz proivde me guidelines as how to rectify the problem?
    Edited by: abaper2008 on May 21, 2008 9:03 AM

  • FRM-41085 when launching form for running report in headstart

    I try to migrate headstart application built in developer 6i, using headstart 5.0 to run on the web, i.e. Oracle application server 10g.When I try to call report, form qms0012f should appear, but then error occurs:
    FRM-41085: variable global.cgnv_last_closed_form does not exist
    Can someone help me?

    wronde wrote:
    Hi,
    I am upgrading an 6i Forms environment to an 10g Webforms environment. Currently the application is running fine, except for all the Headstart forms (f.e. qms0006f, Preferences). If I open this form, I first get FRM-41085: Error getting Group Row count
    And after that another error: QMS-00100 Unhandled exception ORA-06502: PL/SQL numeric or value error ORA-01403: no data found in PL/SQL Program Unit qms$form.init
    I have deployed this application on a linux appsserver, and it creates this error. However, if I run it on my <font face="tahoma,verdana,sans-serif" size="1" color="#000">windows</font> development environment I am able to open the form. Connected as the same user on the same database.
    I compiled the Headstart forms, that are supplied by Headstart itselves, so the form is not generated from Designer.
    Anyone any idea? (If there are still some Oracle consultant reading this Headstart forums?)
    Kind regards,
    WilliamIt's very long now, I have the issue which is similar to what you have faced, Anybody can answer it?

  • Need urgent Help for Kernel upgrade......

    Hi Gurus,
    I have recently upgraded SAP kernel from  Release 6.40 Patch 109 to Release 6.40 Patch 175. My System is SAP ERP Central Component 5.0 and Release is 6.40 and Kernel Stataus is showing below details:
    Kernel release    640
    Compilation       SunOS 5.8 G
    Patch Level       175
    ABAP Load         1521
    CUA load          16
    Mode              opt
    ~
    I have total 8 Application servers. today I have genereated EWA report and in that report, for SAP kernel section it has reported that <b>"You are running different SAP kernel releases on your instances. This situation may lead to severe problems and is not supported by SAP.
    Recommendation: Use only one kernel release for all instances."</b>
    Actaully I have updated kernel in my central instance (/sapmnt/<SID>/exe) and this directory is NFS mount in all the application server. So I am not sure why the SAP EWA is repoting this that you are running difference SAP Kerenl release.
    If this is correct then how to rectify it ? what action I need to take to resolve this ?
    Appreciate your help.
    Thanks & Regards
    Basis

    I will plan to do that as early as possible. Even I
    am going to write to SAP to release that note in
    english for better understanding.
    yes - that note should be translated giving the importance.
    My question is: Am I on HIGH ALERT for this issue ?
    Since it is production server, will it going to
    affect my system in any aspect ??
    No, you will just see a slightly higher usage of "nfsd" when you start the application servers for the first time since they will all copy parts of the kernel locally.
    2nd thing, This is applicable only to NW ? Because I
    have upgraded SAP Kernel to Patch 175 to other R/3
    system having more application server, but I didn't
    get this comment in my EWA report ?
    The comment isn´t related to to usage of sapcpe. The comment means, that you have at least one application server, that uses local binaries with a different patchlevel instead of those on the central instance. I would consider that more critical. Maybe you installed one of the servers later and used a newer installation CD set which creates that new structure for using sapcpe by default... don´t know, just a guess. To check, go to SM51 and select each server and press on "Release Information", you will see which one is affected.
    This week I am planning to upgrade kernel for 4.6D
    release to Patch 2307. Will this be gona issue for
    that also ?
    Kernels lower than 6.10 use a different approach (the "ctrun directory" mentioned in that note) - technically it´s the same. The installation guides for 4.6c should tell you how to set that up.
    Markus

  • Help for Refresh report data!

    First, the CR report XML datasource without any issues.
    But, Crystal Report Viewer  pop up a warning dialog window when user click "refresh" buttion on the toolbar of Crystal Reports Viewer.(The user PC didn't install Crystall Reports 2008)
    Warning content as below:
    Failed to load database information.
    Details: The Databse connector "crda_xml.dll" could not be loaded, The correct version of the database client for this database type might not be installed.
    I'm not even sure if I'm asking question correctly.
    Anyone have any information about this question?
    Best Regards.
    Pat

    Hi,Navin
    Thank you for your help.
    To clarify what I am doing.
    I have created a report using "XML and Web Services" by specifying the xsd and xml file. To run the report using different xml data sources, at runtime the app I have created changes the LogonProperties to specify the new required "Local XML File" and the "HTTP(S) Schema URL".
    *Crystal Report 2008 runtime is missing crdb_xml.dll *
    This DLL seems to be missing from the runtime MSI and the merge module?
    Without this I am unable to utilise reports that have "XML and Web Services" connection type and refresh button  on toolbar of Crystal Reports Viewer .
    Any advice on how to achieve the same thing with "ADO.NET (XML)" would be much appreciated in VC IDE.

  • Authorization for running report based on Remote Cube

    Hi ,
    I have created a report based on Remote cube in BI 7.0
    I have created a DTP with Direct access to load the Remote cube.
    While running the report based on Remote cube , I am getting error
    'You are not authorized for the DTP '
    The report is running only when I assign the '*' value  to the authorization objects for the role in which the report is stored:
    S_RS_DTP = * (For DTP)
    S_RS_TR = *   (For Transformation)
    S_RS_DS = * (For datasource)
    I want to restrict the values to the objects related to my report only rather than * which means ALL.
    Please help what values to assign for these authorization objects for the Role.
    Thanks.

    Hi,
    You need to make necessary settings in RSECADMIN for the Authorization Objects. The default values will be * . You have to customize them to suit your requirement.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/101fb4f5-eb7c-2c10-5daa-b479c47f0a14
    Regards,
    Suman

Maybe you are looking for