Urgent help - History window accidental revert

Hey guys, thanks for reading this. I was working on a picture for about 5 hours and I was just looking at the history window when I clicked the snapshot at the very top. Now.. I clicked it, and it reverted my document all the way back to what I am assuming was my last save (ages ago).
Then I thought, Hey! this layer is pretty usable, maybe I can just copy it and add it to my current work
Big mistake now I cant get to my current picture as the history window now only mentions the layer I copied and not the current changes in the picture i've been working on for the past 5 hours. Surely the data is still here on my computer, I didn't hear my hdd spin as though it was being deleted or anything. Is there anything I can do to get my work back?
Thanks in advance,
Karan

If you only made one additional step after clicking on the snapshot, you can undo and you'll see all your previous steps in the history list, then you can click on the last one listed at the bottom and get back to where you were. If you did two things after clicking on your snapshot, then no, you can't undo to get your old history back.
The next time you want to access info in a previous snapshot (which can be set to take a snapshot of your work every time you save), you can click on it and select the little menu in the right corner of the history tab and select "new document" to make a new file out of that state. Be careful because your history list will be greyed and you have to make sure to click on the last step again to get back to your last state.
And of course, as I'm sure you've learned by now, save early and save often! Five hours is much too long to be working on something without saving your progress!

Similar Messages

Need urgent help! - I accidentally sycn my friend's iphone account to my company's phone. I could not swich back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age.

Need urgent help! - I accidentally sync my friend's iphone account to my company's iphone. I could not switch back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age only remember 1 password which i already try but iphone shown that " incorrect password" I checked on icloud ID and try to log in but it shown as " You Apple ID was disable for security reason. To enable your account must reset password" but so bad again, the email address that he used to create icloud ID also lock for security reason. May Apple Supporter please help reset it ASAP? I can verify that I am the iphone's owner, as it belong to company's phone.

Have your company IT department get proof that the company was the
original purchaser of the iPhone and visit a physical Apple store with
proof of original purchase, proof that person is company representative,
and the iPhone - Apple may be able to help. If no physical Apple store,
contact Apple - you will still need the same items of proof.

URGENT -Help Needed, Windows Email Accounts & Address Book from Outlook Exp

Okay, purchased an iMAC, took the old WINDOWS disk, placed in EXTERNAL ENCLOSURE and was wondering, is there a way to get that .DAT outlook file (on the external now, that OSX sees) and somehow convert or import to MAC MAIL so I can get the address book and all the emails?
Thanks. Am sure this has been a concern - appreciate the help.
Thank you again.

i would first suggest you go to an apple store next to you - if there is one of course - and let a genius do the transfer for you, no hassle, quick and painless...
if you do not wish to do so, or are not close to an apple store, then you may want to read this link: http://www.apple.com/getamac/movetomac/network.html and follow the instructions to migrate.
hope this helps

Need some urgent help // Streaming windows and Mac Pro

HI ,
I have a nice "issue" here.
At present I am in a project.
We save the video images and sound by capture in FCP PRO with Mac Intel. Ans next to that using a Windows PC to stream live to internet.
We send the video by using a converter from analog to digital using S-video in and out Firewire. (from the converter).
After the converter we send the the firewire signal to a belkin hub to distribute to Mac and PC.
Evenrything goes fine. But the MAc responds to the PC and the Mac to the PC . When the PC blocks (the image for streaming) the Mac stops capturing. When I (the Mac) cancel capturing the PC stops streaming
PLease assist if you can .. how to handle. we guess that the hub creates the issues ...
Should we use a more link switch ? like a network switch ?

Our video runs through a video switcher which then outputs the signal to a PC (live streaming) and into a DRS-11 DV deck for recording as well as converting to FW which goes into the Mac for a live capture (redundancy) as well.
<
Yar, you want deal with the VIDEO, not the data stream, which is what you get on FW.
Use a video/audio distribution amplifier to send duplicate versions of your program video and audio content to two or more different encoding/processing systems.
Your boss/clients are not going to understand the technical requirements if they're Web geeks. Try this: If you want two copies of the same book, you don't use a copier. You buy two copies from the printer. You can't use a copier to distribute copies of a book in real time; each page has to be scanned and copied, one at a time, and they have to be collated separately. Anything that interrupts the process, like pulling out the stacks to staple them into, say, chapters (or insert your own metaphor here), causes the copier to stop since it can no longer knows the collation is correct.
bogiesan

ORA12154-Need urgent help on Windows XP Pro-PLEASE HELP!!!!

Hello
Iam having trouble in installing 10.1 g oracle on windows XP Pro box.
The installation goes fine and when it comes to step 3 of Database creation,
The installation screen throws this error:
ORA1-2154:TNS could not resolve the connect identifier specified.
I have not even completed the installation to look into files.
Anyway if I abort the installation,it finishes fine saying error on optional configuration
selected.
Now if I attempt to manually create the database using the database configuration assistant
that too throws the same error when it attempts to start oracle instance.
Here is the tnsnames.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ras268)(PORT = 1521))
Sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Any suggestion will be greatly appreciated.
Thanks
Sam

I think I hit this problem too, but's it been a while. I had to make the following change to the sqlnet.ora file.
#SQLNET.AUTHENTICATION_SERVICES= (NTS) -- PNosko 07/26/2005
SQLNET.AUTHENTICATION_SERVICES= (NONE)

URGENT HELP PLEASE! Compressor BATCH WINDOW disappear

Hello Folks,
I work with final cut Studio 2 and compressor since 1 year. Since last week, when I try to export or open a clip in compressor, the Batch window is not there. I've try to submit a new batch from Final cut or motion to compressor or open directly a movie in compressor but nothing seems to work??? I tried to reinstall all the software and nothing to do. The same problem occur. What's the bug???
Sorry for my bad english, it's not my first language.
Thank you for your help!

There's an actual application called Batch Monitor. Go to Spotlight and type Batch Monitor. It should appear, click it and there it is.
If you were talking about the batch window in Compressor itself, there is the history window (I think that's what it is called, I'm away from the Mac right now). Check up in the menubar under Window and look for the History window. That will list all the jobs you have submitted, whether they were successful or cancelled and the time remaining.
Hmmm... wait. Are you looking for the window that you actually drag your files onto and where you drag the compressor settings to? Try again under the Window menu, or try under the File Menu and select New Batch.
See if that works.

Help! I accidentally put a Pages document in the trash and urgently need to recover it. It was the only copy I had put in of hours of hard work writing an article.

Help! I accidentally put a Pages document in the trash in the Pages app and urgently need to recover it. It was the only copy of hours of hard work writing an article that I had. Thanks so much in advance for any input!

Surfing Wahine wrote:
I might have found the deleted document in the iCloud backup... but am unable to open it or any other docs in the backup zone
What and where is the iCloud backup zone? Can you please describe that for me?

Recovering windows XP -Urgent help needed

I am new to Toshiba. I hav a 60 GB hard disk with no partition and windows XP home installed. I want to partition the hard disk now. Now after formatting the hard disk do i lose Windows XP HE completely or is there chance to recover it and reinstall it. Urgent help needed.

Hi
You can reinstall your notebook using Recovery CD. It is easiest and fastest way to reinstall OS, all necessary drivers and tools. Put Recovery CD into DVD-ROM, start notebook and press down C button. At the beginning there is choice between two kinds of installation (Standard mode and expert mode).
If you choose the first one whole HDD will be formatted and used for OS installation. With second one (expert mode) it is possible to install OS on first partition. It is also possible to define how big the partition should be.
Try it. It is very simple to do it.
Good luck

Urgent Help In ABAP

Hi Gurus,
Please i need an urgent help from you guys. There is a demand file which consits of (Siteno(plant), Item No ,Item Description, Delivery due date) will be placed in a unix system or windows system. I need to write an interface which shows a radiobutton for unix & windows and fileupload button & download button.When user clicks should be able to select only one radiobutton (unix or windows) to upload or download.When the user clicks the fileupload / download button,it should pick up the file or drop the file at particular unix or windows system.
Please help me or give me sample code where in i can select the radiobutton and i can upload / download from unix or windows path. and during upload process (for both unix/windows) ,i should be able to persist into a custom table (ztable,if iam not wrong) and while downloading read the records from custome table and create an excel file to be placedon unix/windows based on the radio button.
Thanks in advance, i need ur help please.
Regards
Bruno

Hi Bruno,
Please checkout this code sample
ABAP code for uploading a TAB delimited file into an internal table.
The code is base on uploading a simple txt file.
<b>
http://www.sapdevelopment.co.uk/file/file_uptabpc.htm</b>
Thanks,
Aby

URGENT HELP NEEDED (Bios Settings Failed)

Hey Guys,
I am having problems with my MSI Board, and don't know what to do. I am very much a noob to BIOS/and modding so I apologize in advance. You guys helped me a few months ago getting everything up and running and all was great for months. Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well. I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again. This allowed me to load windows 7, which then started to "install updates". So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread: https://forum-en.msi.com/index.php?topic=147854.0
However, last week I removed the heat sink and installed this cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB. The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally. However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks. I also should note I didnt make any BIOS changes either after I installed the cooler. So I don’t know if I should have done something there. Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do. I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable. But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
So I am begging anybody for any advice or help they could provide. I will provide my system info below. If anybody can guide me as to what settings I should set in BIOS i would appreciate it. Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink? If you need any more information from me, just ask. I will be monitoring this thread all day, as I desperately need help.
MY SYSTEM:
Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
(1) SATA II WD 3gb Hard Drive @ 1.5TB
(2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
1 SATA DVD DRIVE
1 SATA BlueRay Drive
1 SATA CD Drive
(So 8 SATA Devices Total)
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
1 NVida Geforce GTX 470
1 Soundblaster X-Fi Titanum Card
New Addition Water Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010

PROBLEM: My OC BIOS setting wont load. Even on failsafe i get the "double start". I want to get back to my OC (stable) settings.
UPDATE: Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler. So I did that, and now they system starts fine without the "double start". I am able to load one of my saved OC settings now as well (but any others causes a failure).
NEW QUESTIONS:
1. Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now?
2. I never made any power changes or BIOS changes after I installed the new cooler. Should I have?
3. After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again? I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
4. Is there a new BIOS version for my setup that may be better now? Im currently on v1.5
Here is a screenshot from CPUZ of the system information currently. This is with it booting normally after my CMOS reboot. I just figured id post it incase it helps with any of my questions. Thanks so much for helping guys!

Urgent help needed(java frames)

Hi,
I need urgent help for correcting a piece of code.
I have written a piece of code for building a gui with some buttons, drawing some geometric shapes.The code consists of two files called Graph and Frame.
The problem I suppose in the last part of the Graph file, which Rectangle and Circle are called together, the only shape that the program draws is rectangle.Here is the code:
//Graph
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import java.io.*;
import java.util.*;
public class Graph extends JPanel {
LinkedList color;
LinkedList figures;
public Graph() {
setBackground(Color.white);
figures = new LinkedList();
color = new LinkedList();
int z;
class Point {
int x;
int y;
public Point(int x, int y) {
this.x = x;
this.y = y;
public Point(Point p) {
x = p.x;
y = p.y;
public String toString() {
return "(" + x + ", " + y + ")";
public void move(Point dist) {
x += dist.x;
y += dist.y;
abstract class GeomFigur {
public abstract void move(Point p);
class Line extends GeomFigur {
Point p1, p2;
public Line(Point p1, Point p2) {
this.p1 = new Point(p1);
this.p2 = new Point(p2);
public String toString() { return "Line from " + p1 + " to " + p2; }
public void move(Point dist) {
p1.move(dist);
p2.move(dist);
class Rectangle extends Line {
public Rectangle(Point p1, Point p2) {
super(p1, p2);
public String toString() { return "Rectangle from " + p1 + " to " + p2; }
class Circle extends GeomFigur{
Point centre;
int radius;
public Circle(Point centre, int radius) {
this.centre = new Point(centre);
this.radius = radius;
public String toString() {
return "Circle, centre " + centre + ", radius " + radius;
public void move(Point dist) { centre.move(dist); }
public void addRectangle(int x, int y, Color col) {
Rectangle r =new Rectangle(new Point(x,y),new Point(x+20,y+20));
figures.addLast(r);
color.addLast(col);
repaint();
public void addCircle(int x, int y, Color col) {
Circle c =new Circle(new Point(x,y), 1 );
figures.addLast(c);
color.addLast(col);
repaint();
public void paintComponent(Graphics g) {
super.paintComponent(g);
for (int i=0;i < figures.size();i++) {
Rectangle rect = (Rectangle)figures.get(i);
//Circle circ = (Circle)figures.get(i);
g.setColor(Color.black);
g.drawRect(rect.p1.x,rect.p1.y,20,20);
g.setColor((Color)color.get(i));
g.fillRect(rect.p1.x,rect.p1.y,20,20);
//g.setColor(Color.black);
// g.drawOval(circ.centre.x,circ.centre.y,20,20);
// g.setColor((Color)color.get(i));
// g.fillOval(circ.centre.x, circ.centre.y, 20, 20);
//Frame
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
public class Frame extends JFrame implements ActionListener {
JButton button1, button2, button3, button4, button5 ;
Graph gr;
JComboBox cbx;
JComboBox cby;
JComboBox col;
JMenu filemenu;
JMenuItem quit;
JMenuBar menubar;
int x=10;
int y=10;
Color color=Color.red;
public Frame() {
menubar = new JMenuBar();
filemenu = new JMenu("File");
filemenu.setMnemonic('F');
quit = new JMenuItem("Quit");
quit.addActionListener(this);
quit.setMnemonic('Q');
quit.setAccelerator(KeyStroke.getKeyStroke('Q',Event.CTRL_MASK,false));
filemenu.add(quit);
menubar.add(filemenu);
setJMenuBar(menubar);
button1 = new JButton("Rectangle");
button1.addActionListener(this);
button2 = new JButton("Circle");
button2.addActionListener(this);
button4 = new JButton("Ellipse");
button4.addActionListener(this);
button5 = new JButton("Triangle");
button5.addActionListener(this);
button3 = new JButton("Reset");
button3.addActionListener(this);
String[] elements_x= {"10","20","30","40","50","60","70"};
cbx = new JComboBox(elements_x);
cbx.addActionListener(this);
cbx.setActionCommand("cbx");
String[] elements_y= {"10","20","30","40","50","60","70"};
cby = new JComboBox(elements_y);
cby.addActionListener(this);
cby.setActionCommand("cby");
String[] elements_color = {"Red","Blue","Green","Orange","Yellow" };
col = new JComboBox(elements_color);
col.addActionListener(this);
col.setActionCommand("col");
gr = new Graph();
JPanel top = new JPanel(new BorderLayout());
JPanel inputs = new JPanel(new GridLayout(6,1));
inputs.add(button1);
inputs.add(button2);
inputs.add(button3);
inputs.add(button4);
inputs.add(button5);
inputs.add(cbx);
inputs.add(cby);
inputs.add(col);
top.add(gr,BorderLayout.CENTER);
top.add(inputs,BorderLayout.WEST);
getContentPane().add(BorderLayout.CENTER, top);
setSize(500,300);//set window size
//take care of actions
public void actionPerformed(ActionEvent e) {
String command = e.getActionCommand();
if (command.equals("Quit")){
System.exit(0);//terminate program
else if (command.equals("Rectangle")){
//add Rectangle to graph at
//position x,y and with certain color
gr.addRectangle(x,y,color);
else if (command.equals("Circle")){
gr.addCircle(x,y,color);
else if (command.equals("Reset")){
else if (command.equals("Triangle")){
else if (command.equals("Ellipse")){
else if (command.equals("cbx")){
x=Integer.valueOf((String)((JComboBox)e.getSource()).getSelectedItem()).intValue();
else if (command.equals("cby")){
y=Integer.valueOf((String)((JComboBox)e.getSource()).getSelectedItem()).intValue();
else if (command.equals("col")){
String temp=(String)((JComboBox)e.getSource()).getSelectedItem();
if (temp=="Red") color=Color.red;
else if (temp=="Blue") color=Color.blue;
else if (temp=="Green") color=Color.green;
else if (temp=="pink") color=Color.pink;
else if (temp=="lightGray") color=Color.lightGray;
//main program
public static void main(String [] args) {
Frame appl = new Frame();
appl.setVisible(true);
Thanks in advance
Marina

Hi,
You are very lucky that I'm currently boored. You should never tag a question as urgent. It might be urgent to you, but not to us who answer. And you should also use code formatting when you post code (see the formatting tips, or use the code-button).
I made some changes to your Graph class. The most important thing is the abstract draw method that I added to the GeomFigur class.
import java.awt.*;
import javax.swing.*;
import java.util.*;
public class Graph extends JPanel {
    LinkedList figures;
    public Graph() {
        setBackground(Color.white);
        figures = new LinkedList();
    int z;
    abstract class GeomFigur {
        protected Color color;
        public GeomFigur(Color color) {
            this.color = color;
        public abstract void move(Point p);
        public abstract void draw(Graphics g);
    abstract class Line extends GeomFigur {
        Point p1, p2;
        public Line(Color c, Point p1, Point p2) {
            super(c);
            this.p1 = new Point(p1);
            this.p2 = new Point(p2);
        public String toString() {
            return "Line from " + p1 + " to " + p2;
        public void move(Point dist) {
            p1.move(dist.x, dist.y);
            p2.move(dist.x, dist.y);
    class Rectangle extends Line {
        public Rectangle(Color c, Point p1, Point p2) {
            super(c, p1, p2);
        public String toString() {
            return "Rectangle from " + p1 + " to " + p2;
        public void draw(Graphics g) {
            System.out.println("Draw rectangle at " + p1 + " with color " + color);
            g.setColor(Color.black);
            g.drawRect(p1.x, p1.y, 20, 20);
            g.setColor(color);
            g.fillRect(p1.x, p1.y, 20, 20);
    class Circle extends GeomFigur {
        Point centre;
        int radius;
        public Circle(Color c, Point centre, int radius) {
            super(c);
            this.centre = new Point(centre);
            this.radius = radius;
        public String toString() {
            return "Circle, centre " + centre + ", radius " + radius;
        public void move(Point dist) {
            centre.move(dist.x, dist.y);
        public void draw(Graphics g) {
            System.out.println("Draw circle at " + centre + " with color " + color);
            g.setColor(Color.black);
            g.drawOval(centre.x, centre.y, 20, 20);
            g.setColor(color);
            g.fillOval(centre.x, centre.y, 20, 20);
    public void addRectangle(int x, int y, Color col) {
        System.out.println("x,y,col " + x + ":" + y + ":" + col);
        Rectangle r = new Rectangle(col, new Point(x, y), new Point(x + 20, y + 20));
        figures.addLast(r);
        repaint();
    public void addCircle(int x, int y, Color col) {
        System.out.println("x,y,col" + x + ":" + y + ":" + col);
        Circle c = new Circle(col, new Point(x, y), 1);
        figures.addLast(c);
        repaint();
    public void paintComponent(Graphics g) {
        super.paintComponent(g);
        for (int i = 0; i < figures.size(); i++) {
            GeomFigur drawable = (GeomFigur)figures.get(i);
            drawable.draw(g);
}/Kaj

Urgent help needed: registry.dat is missing when i run my form in web base

Hi gurus,
i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
Details...
Java Exception:
oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRegistry(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.applet.JinitAppletPanel.run(Compiled code)
at java.lang.Tread.run(Thread.java:466)
what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
Your urgent help and advise is needed plssssssss.......
Many thanks in advance.

The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
Also, try if the URL with the slash:
http://domain.com/form60/java/oracle/forms/registry/Registry.dat
does work when you just paste it in a browser. It should download the Registry.dat file

Urgent Help Required - Video Not playing on IE11 and Firefox

Hi,
I need Urgent Help , I am trying to Play this Presentation on IE 11 and Firefox and it doesn't play the Video part which is FLV and f4v formats.
I have been googeling it but couldn't find a solution so far ,Can anyone please help , its really urgent as I am done with the Project ,and this is the last bit which I have been struggling with for a while now.
Here is the HTML Code I am using :
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>index</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css" media="screen">
html, body { height:100%; background-color: #ffffff;}
body { margin:0; padding:0; overflow:hidden; }
#flashContent { width:100%; height:100%; }
</style>
</head>
<body>
<div id="flashContent">
   <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="800" height="600" id="index" align="middle">
    <param name="movie" value="index.swf" />
    <param name="quality" value="high" />
    <param name="bgcolor" value="#ffffff" />
    <param name="play" value="true" />
    <param name="loop" value="true" />
    <param name="wmode" value="window" />
    <param name="scale" value="showall" />
    <param name="menu" value="true" />
    <param name="devicefont" value="false" />
    <param name="salign" value="" />
    <param name="allowScriptAccess" value="sameDomain" />
    
    <object type="application/x-shockwave-flash" data="index.swf" width="800" height="600">
     <param name="movie" value="index.swf" />
     <param name="quality" value="high" />
     <param name="bgcolor" value="#ffffff" />
     <param name="play" value="true" />
     <param name="loop" value="true" />
     <param name="wmode" value="window" />
     <param name="scale" value="showall" />
     <param name="menu" value="true" />
     <param name="devicefont" value="false" />
     <param name="salign" value="" />
     <param name="allowScriptAccess" value="sameDomain" />
    
     <a href="http://www.adobe.com/go/getflash">
      <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
     </a>
    
    </object>
    
   </object>
</div>
</body>
</html>
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->

Any Help in this Regards will be highly appreciated

Error while Updating "Failure configuring Windows updates - Reverting changes"

I've recently formatted my HP ENVY 15t-3200 CTO Notebook PC.
When I'm updating the PC the Error of "Failure configuring Windows updates - Reverting changes - Do not turn off your computer" triggers on screen when the PC restarts after installing the Updates.
It takes hours to revert the changes.........
Pls. help me out as I can't update my PC to Windows 8.1 from Windows 8 Pro.
I've also tried to resolve the issue by searching on the vrious websites but the issue has not been resolved yet.
Thanks

Hi,
Try the following.
Open an Elevated Command Prompt.
Type in ( or just copy and paste ) the following command ( including spaces ) and hit enter.
Dism /Online /Cleanup-Image /RestoreHealth
This will take a while to complete, but when it’s finished, restart the notebook.
Let windows fully load, then once again, open an elevated command prompt, then enter the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Restart the notebook then try upgrading to 8.1 again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Once I install Downloadhelper, I am no longer able to open the Downloads window (Command-J) or the show all history window.

I am using Firefox 7.0.1 on Mac 10.7.2, my downloads window and my show all history window would not open. After trying everything, I had to remove all my firefox information from the computer and reinstall then make a new profile with the profile manager. That fixed it but when I re-installed download helper the problem occurred again. I repeated this to make sure it was download helper.

I located the problem and it is not Downloadhelper. When I open firefox on my second monitor (I use an imac and a second monitor for dual screen) I can no longer see my downloads window.

Urgent help - History window accidental revert

Similar Messages

Maybe you are looking for