URGENT HELP Hyperion Enterprise 6.5

Hi,
We have a user that is unable to select Application from Hyperion Enterprise 6.5
The "File-Based Application' option in the application driver drop-down list is not visible.. but its visible for other users
and we have checked the users profile time and time again
and we have removed the Hypent.INI file time and time again
any help would be Apprenticed
Thanks

FDM would easily handle your request.
As Enterprise is end of life in May, there will be fewer and fewer people able to respond to these questions.

Similar Messages

NEED URGENT HELP ON ENTERPRISE ASSET MANAGMENT

I nedd to know where can I find requirements (sw & hw) for oracle enterprise asset management. I have a client that wants to install just this module, so i need to know what other products must be previously installed/licensed (db/appserver/httpserver) or any aother info regarding this module. I have been searching here and in metalink to find this info but until now I have succesfully failed.
this is very urgent.
thanx in advance

Pls employ our consultants to help you out.

Help on Migration from Hyperion Enterprise 6.5.0 to HFM 11.1

Hello All,
We are planning to upgrade our system from Hyperion Enterprise 6.5.0 to HFM 11.1 and would be very grateful if you can help us in answering the below questions as I am novice in Hyperion.
Current Environment:
We have one Hyperion Enterprise 6.5.0 server and Hyperion 6.5 client is installed on two Citrix servers. We use Citrix servers to publish Hyperion client which users can use to access the Hyperion application. I have been planning the Citrix upgrade for Citrix servers and due Hyperion 6.5 incompatibility with Win2008 R2, we are also planning to do Hyperion upgrade to either 6.5.1 or to HFM.
Having no knowledge on HFM, I found out that HFM is web-based application and users can access HFM application through browser unlike Hyperion 6.5 which is accessed by Hyperion client.
I have following question if you can help me, please:
1. Do we need any client to access HFM or all the feature are web based?
2. If it is web-based, do we need any web-server or IIS can be used to provide access to HFM application to users?
3. How many servers (application, web-server, database server etc) would be suffice for 270 users, any estimate?
My questions might be very dumb for this forum but, I would really appreciate and thank any kind of help provided.
Thanks,
Rajneesh

You should not proceed without expertise in HFM. The installation and configuration requires a much greater technical knowledge and support than Hyperion Enterprise does. Also, you should not perform a straight migration of Hyperion Enterprise to HFM since you have to consider the differences in dimensionality. I recommend you engage someone who has already done such a migration and has good experience with HFM.
--Chris

Help! Hyperion Enterprise 6.5 and importation data

Hello everybody,
I need help for importing data from SAP FICO to Hyperion Enterprise 6.5.
In first i think that Ledgerlink is my solution but in fact it's not because this tool is for importing account and entity, that's all!
My purpose is to import amount in HE respecting a mapping.
Any idie?
Thank's a lot and sorry for my english...
Rachid.

FDM would easily handle your request.
As Enterprise is end of life in May, there will be fewer and fewer people able to respond to these questions.

Hyperion Enterprise Web error when trying to do application setup

Hi David,
Thanks a lot on helping me in resolving one issue, "Hyperion Enterprise Error: Module not Found He.hecontainer". But when I click on application setup I am getting the following error message.
Server Error in '/HEWeb' Application.
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 793:
Line 794: ' Get the application list
Line 795: vtStatusCode = Application("EntAppObject").EnumApps(vtAppListXML, vtStatusDesc)
Line 796:if vtStatusCode 0 or vtAppListXML = "" then
Line 797: ' To display the localized string for Errorloading application list problem
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.startupadminmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx:795
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint
Thanks,
Rakesh

Hello,
I believe you posted your query to the wrong forum. I would suggest you review the classifications for which forum to post the query. This assist other users by following the guidelines:
Financial Consolidation
Covers Hyperion Financial Management, Hyperion Enterprise, and respective administration/development topics
Financial Data Management
Covers Hyperion Financial Data Quality Management, Hyperion Data Relationship Management (formerly Hyperion MDM), and respective administration/development topics
So in essence; please repost your query to Financial Consolidation.
Thank you,

Hyperion Enterprise web error

Hi ,
Thanks a lot on helping me in resolving one issue, "Hyperion Enterprise Error: Module not Found He.hecontainer". But when I click on application setup I am getting the following error message.
Server Error in '/HEWeb' Application.
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 793:
Line 794: ' Get the application list
Line 795: vtStatusCode = Application("EntAppObject").EnumApps(vtAppListXML, vtStatusDesc)
Line 796:if vtStatusCode 0 or vtAppListXML = "" then
Line 797: ' To display the localized string for Errorloading application list problem
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.startupadminmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx:795
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint
Thanks,
Rakesh

Hi Rakesh - looks like you opened a new thread. (not sure which one is active so I've posted to both. I'll look for a reply on both. Cheers. -David),
Hyperion Enterprise Reporting 6.5 is NOT supported on MS Windows 2008 server.
Hyperion Enterprise Reporting 6.5.1 is supported.
Could you please verify your version of Hyperion Enterprise Reporting (again)?
Please also verify the other components of your build against your version at the following link:
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
(See Hyperion Enterprise 6.5.1 (XLS) or Hyperion Enterprise 6.5 (XLS) depending on your version)
Also can you confirm you performed the following steps during your installation of Hyperion Enterprise Reporting?:
Applies to:
Hyperion Enterprise Reporting - Version: 6.3.1.0.00 to 6.5.1.0.00 - Release: 6.3 to 6.5
Information in this document applies to any platform.
Purpose:
Configuring Hyperion Enterprise Reporting Web.
Questions and Answers
How to Configure Hyperion Enterprise Reporting Web?
1. Create LOCAL username and password with Administrator rights. This is your impersonation account.
You may use the local administrator as your impersonation account, but it MUST be local, not a domain admin.
2. Users IWAM..., IUSER... SYSTEM, INTERACTIVE, Administrator and Everyone are automatically created users/groups.
In Local Security Settings -> Local Policies -> User Rights Assignment.
Add the add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, Impersonation account and Everyone to:
a) Act as part of the Operating System.
b) Log on locally (or Allow log on locally).
c) Log on as a service.
d) Log on as a batch job.
3. In IIS services <server>
Web Sites -> Default Web Site -> Right click on HSpider -> properties
Virtual Directory tab.
Select only Log visits and Index this resource.
Application name: HER.
Execute Permissions: Scripts and Executables .
Application Protection: High.
Directory Security tab.
Deselect all except Basic Authentication .
(Windows 2003) Web Service Extension .
Select All Unknown ISAPI Extensions.
Click the Allow button.
Repeat with all other items starting with HER and Active Server Pages.
4. In Component Services -> Computer ->
a) Right click on My Computer -> Properties.
b) Default security tab (COM security tab).
c) Access Permissions Edit Default button.
d) Add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, and Impersonation account.
e) Launch and Activate permissions Edit Default button.
f) Add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, and Impersonation account.
5. My Computer -> Com+
a) IIS... HSpider properties -> Identity tab.
b) Browse to impersonation account and add password.
6. My Computer ->DCOM Config (or Start-> Run -> DCOMCNFG).
a) Right click HypPkgrH_Pooler -> Properties -> Identity tab.
b) Browse to impersonation account and add password.
c) Repeat with Spider_Pooler.
7. Internet services must be reset (Start -> Run -> iisreset).
8. In the Hyperion Enterprise Reporting folder of the Start menu, select Web Server administration
Program.
Options button.
Network tab.
Select Allow Hyperion Enterprise Reporting Web Server to access other network devices.
Add the impersonation account and password.
If desired, select the Preload tab and add your application.
System is Enterprise6 as found in the repeng.ini.
If using Distributed Retrieve or Schedules
9. In the Hyperion Enterprise Reporting folder of the Start menu, select Distributed Server Manager
a) Network tab
b) Select Allow client to access other network devices
c) Add the impersonation user and password
If you have any questions about these steps please don't hesitate to drop me a note and I'll do my best to explain what is required.
G'Luck,
-David

Hyperion Enterprise Reporting Error

I'm new to Hyperion Enterprise and Hypeion Enterprise Reporting. While exploring the reporting portion of it in Hyperion Enterprise reporting" I unintentionally made some setting change which has resulted in period dimension in POV showing *error*. Rest of the dimensions are displaying properly but this has resulted in reports not displaying anything. Can anyone guide me on how to undo this. Thanks in advance for your help.

Hi Jay,
This is basically due to a Proper Frequency is not set in the POV.
And easy way would be to log in to Enterprise and click on Reports module and open the report and check if you are able to view the data.
If so make a note of the POV and making a note of the POV should be done in the Enterprise Reports module, the reason why is when you open the POV in the Enterprise reports module it would open the POV the similar way it opens in the Hyperion Enterprise reporting.
Make a note and write it down exactly as it is being displayed in the Enterprise > Reports module POV.
Hope this helps,
Thank you,
Charles Babu J

Smart View Excel Add-in for Hyperion Enterprise 6.5

Hi All,
I'm trying add a data source connection directly in Connection Manager and my data source provider is Hyperion Enterprise. In the Install manual it mentions the following URL syntax for Hyperion Enterprise http://<servername>/heofficeprovider/heofficeprovider.aspx. I used the same syntax and added the server name but it errors out stating "Cannot connnect to provider. Make sure it running in the specifice host/port Error(401).
Has anyone encountered such an error and what might be the solution for it?
Thanks a lot for the help.

Hello,
Sounds like you have the right URL and Smartview 9.3.1.2 is compatible with HE 6.5.
401 error is an Authorization error. So it may be an idea to start looking at the IIS server where the Enterprise Smart View Provider is installed.
When you configured the provider did you give a valid anonymous user account with sufficient rights?
There may be some messages about User rights or what is causing the error in the IIS Servers Windows Event Logs. Maybe have a look there first.

Hyperion Enterprise 6.5.1.1 Error when configuring HEWeb

I have a newly installed version of Hyperion Enterprise 6.5.1.1 on a Windows 2008 R2 server. When I launch HEWeb via internet explorer, I am getting the following error:
Server Error in '/HEWeb' Application
Object variable or With block variable not set
I am trying to configure Smart View, but before I can do so, I must web enable the Enterprise application. I tried to access Server Administration via the HE Client, but that gives me the following error when I try to save the settings
HTTP 500: iis 7.5 detailed error - 500.0 - internal server error
Any help would be appreciated

Hi,
Though you haven't said the bit version of the Windows and I assuming you are on a 64 bit...
Have you followed the instructions / prerequisites while performing an install.
Please refer to the below Heading in the Enterprise ReadMe.
To install this release in a Windows 2008 Server 64-bit environment:
Read Me URL:
http://docs.oracle.com/cd/E12379_01/doc/ent.650/ent_6511000_readme.pdf
If not, uninstall everything and start from the scratch as per the instructions. Make sure you run the command.
Hope this helps,
Thank you,
Charles Babu J

Hyperion Enterprise 6.5.1.0 on Microsoft Window 8 (64bits) Laptop

I use Hyperion Enterprise 6.5.1.0 only on my Laptop and i want to install Enterprise on the latest Windows 8.1 - 64bits.
Do you know which pack must be intalled to run in 64bits?
Is tehere any trap during the intallation?
Thank you

Hi,
Though you haven't said the bit version of the Windows and I assuming you are on a 64 bit...
Have you followed the instructions / prerequisites while performing an install.
Please refer to the below Heading in the Enterprise ReadMe.
To install this release in a Windows 2008 Server 64-bit environment:
Read Me URL:
http://docs.oracle.com/cd/E12379_01/doc/ent.650/ent_6511000_readme.pdf
If not, uninstall everything and start from the scratch as per the instructions. Make sure you run the command.
Hope this helps,
Thank you,
Charles Babu J

Upgrade to Hyperion Enterprise 6.5.1.1.102 - Performance Issues

We are testing an upgrade to Hyperion Enterprise 6.5.1.1. We have applied the Update 2 patch which I believe officially takes the version to 6.5.1.1.102. In testing reports and consolidation between the new version and the old 6.4.1 version of Enterprise, we are seeing a delay in how long it take reports to generate and for Consolidation to complete. With reports, we see the delay specifically when running large reports that pull a lot of data.
Currently, our 6.4.1 Hyperion application is installed on a Win2003 server and our users access Hyperion via Citrix. The 6.5.1.1.102 version is installed on a Win2008 server and is being accessed through Citrix.
To isolate this issue, we loaded Hyperion locally on a server and the timed some reports. The 6.5 reports take just as long to run as on our current v6.4 platform. So, it appears there is a performance issue running 6.5 enterprise through Citrix. Has any one else experienced this type problem or have any suggestions. We have been referred to numerous performance tuning notes from Hyperion support but nothing seems help.
Thanks.

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

Upgrade Hyperion Enterprise 6.2 to 6.5

Hi,
We want to upgrade Hyperion Enterprise from version 6.2.1 to version 6.5.1 so I wanted to know if there is any document document and if there are do's and don'ts for the same. Will there be any functionality that will not be working in this case ???
Thanks,
--XAT

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

Essbase & Hyperion Enterprise API

Is there anyone out there that has done extensive calls to Essbase or to Hyperion Enterprise 5.5 using API?Has anyone developed an application that does outline maintenance outside of Application manager? We have a very manual process since we do not pull everything out of enterprise and make that part of our outline dynamically through like a load rule. We bring all the accounts into a dimension and then drag them to where they need to go.Any Help would be appreciated.Paul [email protected]

I found this set of instructions that could help you create your own Status Function, but you really need to know Visual Basic, anyway here it is:
Dim selectaddrc As Long
Dim wStatus As Integer
Dim iDataView As Integer
Dim sDataView As String
Dim iView As Integer
Dim lpBuf As String * 127
Dim lpAPIs As apiStruct
sigCat = EntFindStrN(glhSelect, HYP_ID_CATEGORY, HYP_NONE, szCategory, 0)
If sigCat = HYP_NONE Then
nRC = MsgBox("Unable to obtain Category signature.", vbExclamation, sMsgTitle)
Exit Function
End If
sigEntity = HYP_NONE
If szEntity <> "" Then
sigEnt = EntGetEntitySig(glhSelect, szEntity, NAME_EXPLICIT)
End If
dValue# = 0
lpAPIs.sigCat = sigCat&
lpAPIs.sigName = sigEnt&
lpAPIs.sigParent = HYP_NONE
lpAPIs.wType = ID_REGULAR
lpAPIs.lStartPeriod = StPer& - 1
lpAPIs.lEndperiod = StPer& - 1
lpAPIs.u_Dfa.sigAcct = -1
lpAPIs.u_Dfa.iFreq = -1
lpAPIs.u_Dfa.bAutoRecalc = False
lpAPIs.u_Dfa.bPeriodic = iDataView%
lpAPIs.u_Dfa.sViewType = HYP_NONE
lpAPIs.u_Dfa.sigAccumFreq = HYP_NONE
lpAPIs.lpimrData = EntGetVarAddr(dValue#)
lpAPIs.lpseStatus = EntGetVarAddr(wStatus%)
selectaddrc& = EntSelectTableAdd(HYP_ID_PSFDATA + HYP_ID_ASSOC, sigCat, glhSelect&, APILOCK_READONLY, 0, 0, 0, 0, lpAPIs)
If selectaddrc& = -1 Then
Exit Function
End If
rc = EntQueryExStr(glhSelect, HYP_ID_PSFDATA, HYP_PSF_GETSTATUSTEXT, -1, -1, Len(lpBuf$), lpBuf$, lpAPIs)
If rc% = 0 Then
GetPSFStatusA = UCase$(CToB(lpBuf$))
Select Case GetPSFStatusA
Case "LOCKED"
FlGrdPSFStatus.CellForeColor = &HC0&
Case "OK"
FlGrdPSFStatus.CellForeColor = &H8000&
Case "NO DATA"
FlGrdPSFStatus.CellForeColor = &H0&
Case "CHANGED"
FlGrdPSFStatus.CellForeColor = &HC0&
Case "IMPACTED"
FlGrdPSFStatus.CellForeColor = &HC0&
Case "CALC"
FlGrdPSFStatus.CellForeColor = &HC0&
Case Else
'FlGrdPSFStatus.Font = "Arial Narrow"
FlGrdPSFStatus.CellForeColor = &H0&
End Select
End If
glhSelect& = EntUnSelect(glhSelect&, HYP_ID_PSFDATA, sigCat, 1, rc%, lpAPIs)
End Function

Hyperion Enterprise 6.5.1 Web Communication Error

OS Environment : Window Server 2003
Hyperion Enterprise Version: 6.5.1
I am having receiving the following error while opening Hyperion Enterprise thru Web:
Error:
There was some communication error while loading the tree. HTTP Status: 500
Object reference not set to an instance of an object.
Line 35: strlang = Request.Cookies.Get("Displaylanguage").Value 'II
If you have encountered this problem or have an answer to this problem, I would really appreciate your help.
Thanks

Hi,
I got this problem in January 2010.
This problem is　concerned about cookie validation date for HPE651 web, also HPE6500.
Please see the Pacth p9544446_65100_WINNT.
Thanks,
Hisahiko Shimura

Hyperion Enterprise 6.5.1.1 performance?

Hi!
Is anyone using Hyperion Enterprise/Hyperion Enterprise Reporting 6.5.1.1? On Windows 2008 64-bit R2 Standard servers?
If yes- have You experienced any performance issues/errors?
Thank You!
Zigmunds
Edited by: 1007063 on May 29, 2013 9:55 AM

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

URGENT HELP Hyperion Enterprise 6.5

Similar Messages

Maybe you are looking for