Urgent Help Installation Problems (It's getting annoying now... been over a year)

When ever i try to install apple snow leopard a message error appears "please clean disc" or "unsupported files"

Clean the bottom of your installer disk or get a new one from Apple.
If the problem continues, you have a dirty lense in your Superdrive most likely.

Similar Messages

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

HT201272 Help - have an iTunes account on iPad for well over a year. Just bought iPhone 5 and I cannot purchase apps using my account. I am asked to verify my credit card and details but then it rejects them. They are still fine on the iPad. Any ideas?

Help - have an iTunes account on iPad for well over a year. Just bought iPhone 5 and I cannot purchase apps using my account. I am asked to verify my credit card and details but then it rejects them. They are still fine on the iPad. Any ideas?
I tried to contact support but they do not recognise my Thai phone number.
the Thai support site is all in Thai (and I neither read or write it).
All I want is a single email address that works - it must be quite a simple process.
I don't want to create another account with another credit card - life will just get seriously complicated then.
BTW my apple I'd is accepted for downloading free apps!!!

First of all, you should always save you photos on computer like any other digital camera.
Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
What computer do you have?

Error 13019 really getting annoyed now please help!

I have an iPod touch 1st generation. I have the latest 3.0 update and I have the latest iTunes update. Yesterday my iPod was working fine. Now, every time I try to sync music, iTunes backs up my iPod but then gives me error 13019. I know what it means, but how do I get rid of it? I havent done anything to my ipod or iTunes that would give it an error. I havent updated anything so why would it give me errors? I have already tried resetting my computer and iPod. It says my iPod can't be synced. But I know it can because I can put movies, apps, and everything else on it. Just not music. Please help me with this. I am really getting annoyed with all my iPod problems now!!!
Message was edited by: nhnkj

hamish72 wrote:
Is his up bandwidth of 828 an indication he's line is upgraded and is not the modulation shown in stats his line modulation ?
Hi hamish72
there have been previous posts on the forum where the modulation has changed to 992.5 with the change in upload speed but with download still on adslmax level. either getting mods involved or phoning sales and agreeing a new contract appear the solution to getting download upgraded
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Getting annoyed now!!!!Mod please

Right where do i start moved to a new home about 4 months ago. Moved from a 8mb connection to what i was told was a 2.5 mb connection. When i had my BB activated i was averaging 100 kbps on download
stats
Download speed achieved during the test was - 227 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :1056 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
then after a call to the customer service i had an engineer visit who played about on the pole outside for a bit and managed to get my speed up and running to
stats
IP Profile for your lDownload speed achieved during the test was - 2328 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :3648 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
Now the speed above is the speed i was getting constantly with the lowest going to 3444kbps for the last 3 or 4 months then all of a sudden my line drops again
stats
Download speedachieved during the test was - 1358 Kbps
For your connection, the acceptable range of speeds is 400-2000 Kbps.
Additional Information:
Your DSL Connection Rate :1984 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 1500 Kbps
ok so i have rung customer service and had 2 engineer visits. Luckily the 1st engineer visit was the same bloke who got my line upto 3648 so he sort of knew and was easy to explain to at least i thought all he did was move the drop line into a different room when he spoke to his bosses they advised him that i was getting 1.7 mb connection and that was normal for my line? Wrong normal was 3.4 which i was getting for months. So i complained to the bt guy and he said he knew how i felt cause of the drop. So he went away after that i called customer service to report the issue had not been sorted.
Another engineer visit was booked this time for a broadband specialist who came over and said that my line was not earthed properly as he could tell through his tests so he did some work up the pole to and came down after an hour and said that he managed to get my speed back to 3 mb which i was kinda thinking i was happy with. So after the second engineer left my home after doing no tests on my test socket only up the pole i decided to check this with speedtester and see if the downstream had gone up. To my amazement it had not so once again i had to call customer service who told me that they were gonna do something to take the line noise out and get it a couple of DB down and that the work was completed this morn and it would improve my line quality. Im not stupid i have checked my hub stats everyday since this error and nothing has gone down if anything it has gone up so it seems no work has been done at this time???? Also i have rung concerning my bb hub light kept resetting itself i got told to test another hub which i didnt have one so i was told the only way bt would send me one is to sign another 1 year contract !!!!!! Which i did cause im stupid!!! Guess what wasnt the hub .Also i was told today by customer services that it would take 3 months to get fibre and maybe wait for that hahaha do you think im stupid i live in a rural area hence the **bleep** connection i aint getting fibre for at least 10 years. Now customer service has told me to monitor my speed for yet another 3 or 4 days and get back to them. My speed hasnt improved and i wont except anything lower than 3mb connection i was getting before. My connection is bad at the moment and i cant even test my speed on bt cause i get this message
<script type="text/javascript">// paintProgressAndMessageTestBar(0," "); paintProgressAndMessageOnBar(70,'Last Test Required'); // </script> <script type="text/javascript">// var isIE=(document.all)?1:0; var isNS=((document.getElementById)&&(navigator.appName=='Netscape'))?1:0; function win_close() { if (isNS){ window.open('','_parent',''); } else { window.open('','_parent',''); top.window.close(); } } // </script>
In order to commence the third test, you are required to temporarily re-configure your Connection settings. WARNING:
Before changing your PC/Modem settings, please note down your current Username and Password details.
You will not be able to connect to the internet without reverting back to the old Username and Password settings.
If you are unable to follow the instructions given here (to the right) or if you are not confident to change these settings then please go to FAQ Section or seek assistance from your ISP.
Instructions:
Go to the start menu, click Settings, Control Panel and the Network Connections folder.
Select the Connection that you use to connect to your ISP.
Change the Username to: speedtest@speedtest_domain and blank the Password.
Set this connection as your default and click Ok.
Double click the connection and wait for the message "Connected".
Once this has successfully Connected, click the button below:
Can a mod look into this please as im starting to get angry about the whole thing there is an issue somewhere as my line speed has dropped alot and im not getting what i got before.customer service said they would ring me back on sat as they increase the ip profile by 250 but the downstream just inst there any more so i cant see how this will help. The customer service guy is always polite but just seems we are getting nowhere. my router stats are at the moment
Line state
Connected <script type="text/javascript">// function p_ajax_adsl_status() { ajax_download_start('adsl_status=1', p_ajax_adsl_status_cb); } function p_ajax_adsl_status_cb(xml) { if (document.getElementById('adsl_status').innerHTML != xml) { document.getElementById('adsl_status').innerHTML = xml; mimic_button('submit_button_ajax_refresh', 1); } else setTimeout('p_ajax_adsl_status()', 5000); } setTimeout('p_ajax_adsl_status()', 5000); // </script>
Connection time
0 days, 02:19:41
Downstream
1,536 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
15.5 dB / 21.0 dB
Line attenuation (Down/Up)
54.0 dB / 31.5 dB
Output power (Down/Up)
2.6 dBm / 1.5 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
9632 / 110
CRC Errors (Down/Up)
27309 / 75
HEC Errors (Down/Up)
53373 / 80
Error Seconds (Local/Remote)
9513 / 158

Hi miket101,
Thanks for the email, I'll check this now and drop you an email back shortly.
Cheers,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Urgent help!! how to get schedule aggrement number from in bound delivery??

hello friends,
I have an urgent requirement for report. in which i have to diaply schedule aggrement number , in-bound delivery number , GR number and accounting document.
my input is inbound delivery date .
i found inbound delivery from likp-lips with type 'el' but not able to trace the schedule line number ,gr and ir , kidnly help me
thanks in advace
jase

right the query using table LIPS, EKKO, EKPO and EKBE
If you need than only use LIKP othre wise you will get the date from LIPS
make join from LIPS to EKKO than EKPO then EKBE
LIPS-VGBEL field can join to PO document of EKKO

Urgent HELP needed: Problems transfer from Bold 9900 to Z10

Dear helpdesk,
I've just received my new Z10 and want to transfer all data from my old 9900.
Using Link software seems to work fine.... until the copying from the 9900 is almost finished. Then I get the message "Data could not be copied from your device due to the following errors: There could have been a problem with the device or communication during the backup. Verify that the device is tuned on and connected".
Surely that IS the case.... I've already removed the old BB Desktop SW and reinstalled the Link SW.
Without success unfortunately.
What do I do wrong/do I need to do to get my files copied to the Z10?
I am also wondering what would happen to the memos which I made using the 9900's MemoPad?
Thanks for your swift help!
Marnix Kerkhoff

Hello MarnixKerkhoff,
Welcome to the BlackBerry Support Forums.
Reinstall BlackBerry Desktop Software and try to backup the data from your BlackBerry® Bold™ 9900 smartphone. Does the data backup successfully?
The BlackBerry MemoPad data will be transferred to the Remember application on the BlackBerry® Z10 smartphone.
Please let us know how you make out.
-RoundBrown
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Please could someone Help (installation Problems on Web design Premium cs4.)

hi there everyone, sorry I'm new to this and probably in the wrong place. But hope someone is kind enough to help me. When I place disk one in I put in the serial code and everything pops up and looks good however, when I want to download the only one I can select to put on my computer is Acrobat non of the other programs will select. it'll download that fine then says complete then an exit button. I hope someone can see if there's something I'm doing wrong or if you think I've got faulty disks, this is a student version.. (not sure this makes a difference but thought I better say just incase.)
Many thanks for anyone who can help.
Lara

Hi - I bought the student version through my college and was so EXCITED! Then it took me over 8 hours (and much of that on the phone to Adobe support) to get the suite installed.
In the end it turned out we had to stop all the Microsoft and Windows processes in Task Manager during the installation - something to do with 64-bit vs 32- bit (I have a 64-bit version of Vista running)
This was scary to me as I do not like to mess with Task Manager in case I mess something up...
I would not reccommend doing this just on my say-so without getting more help, but it could give you a starting place for asking more questions.
I will say, that although it took what seemed like forever, and at times she seemed as stumped as I was, the woman at the Adobe end of the phone was very patient and helpful.
Good luck,

HELP!! THIS IS GETTING ANNOYING!!

My phone continuously has this popup saying something along these lines:
Something went wrong
If this problem persists, try logging in...
Please help!! vzw-admin

Oh boy! I see your cause for alarm. Please share some additional detaisl so we can get this resolved, peakay. What device are you using? Does the pop up occur during any particular function?
TamaraH_VZW
Follow us on Twitter @VZWSupport

Installation Problem - Doesn't Get Past "Verifying Installation Media"

Using VMWare, I've segmented our working 7.0 LiveCycle server with another instance of Windows Server, etc., and I'm trying to install the LiveCycle ES Pre-Release to that new image. I've installed jdk1.5.0_11, and after running "win_livecycle8_setup.exe" per the instructions, the installation routine displays "Verifying Installation Media" ~ now running for 18 hours. In the Task Manager, "win_livecycle8_setup.exe" is running and doing something, but it won't continue with the install. Ideas?
Thanks for your help in advance!

After talking with tech support, you need to retain the root directory (in my case, "8.0.3190.1.380442.16_JBoss_EFGJ_DVD") when you extract the installation software. I had re-labeled this to "LiveCycle ES Install" so that we knew what it was in our network folder, but the installation software didn't like it. After renaming it back to "8.0.3190.1.380442.16_JBoss_EFGJ_DVD", the software installed successfully.

Urgent Help : Workflow Problem

Hi,
Siebel 8.0
I am working on EAI workflows. I am using Siebel Tools Simulator and also the Business Service Simulator to test my workflows. However I am facing some issues.
I am not able to simulate my new workflows. However all the older workflows are working fine. Below are the steps that I take to simulate the workflows:
1. Create a workflow in Siebel tools and click the publish/activate button. Check if its status changed to Completed.
2. Open Siebel Web Client > Sitemap > Admin-Business Service > Simulator.
3. Process Name "Workflow Process Manager" and Method name "RunProcess"
4. Under Input Arguments: Property Name "ProcessName" and Property Value "WORKFLOW NAME"
5. Click the run button.
At this point I get error as:
Siebel
Cannot execute workflow process definition 'Test EAI Workflow 4'.(SBL-BPR-00158)
OK
However the older workflows work fine with the same approach. I am able to Simulate. Even I copied the existing workflows (that I am able to Simulate) but they dont work either. :(
Please Help
Thanks :)

Hi,
You need to activate the new workflows u have created. If u want to test the workflow in thin client, then manually import the workflow in active workflow process and try to simulate.
This error will occur if the workflow is not "ACTIVE" in the active workflow process under Administration - Business Process.
Regards,
Joseph
Edited by: Joseph ArulDass on Jul 14, 2010 3:47 PM
Edited by: Joseph ArulDass on Jul 14, 2010 3:56 PM

Urgent: KM installation problem..

Dear All,
I am trying to install KM on WEBAS 6.4 patch 9.
I am using master CD to start SAP INSt.. then i specify location for NW Component CD and give user logon details.. it starts installation, but in second step itself. it gives error:
ERROR 2006-02-06 12:41:51
FJS-00003 TypeError: node has no properties (in script InstallationScript_32, line 12683: ???)
Can you please suggets is i am missing something here..
I am attaching detail of log:
INFO 2006-02-06 12:38:56
Copying file C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-02-06 12:38:56
Copying file C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-02-06 12:38:56
Creating file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\q0w9e9r8t7.1.xml.
INFO 2006-02-06 12:38:57
Copying file C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/keydb.1.xml.
INFO 2006-02-06 12:38:57
Copying file C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/keydb.1.xml.
INFO 2006-02-06 12:38:57
Creating file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\keydb.1.xml.
INFO 2006-02-06 12:38:58
Installation start: Monday, 06 February 2006, 12:38:56; installation directory: C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC; product to be installed: SAP NetWeaver '04 Support Release 1> NetWeaver Components Running on Java> Content Management and Collaboration> Content Management and Collaboration Installation
INFO 2006-02-06 12:39:07
Creating file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\java.log.
INFO 2006-02-06 12:39:08
Output of C:\j2sdk1.4.2_08\jre/bin/java '-version' is written to the logfile java.log.
INFO 2006-02-06 12:39:08
Execution of the command "C:\j2sdk1.4.2_08\jre/bin/java '-version'" finished with return code 0. Output: java version "1.4.2_08"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
INFO 2006-02-06 12:39:08
Looking for SAP system instances installed on this host...
INFO 2006-02-06 12:39:10
Found these instances: sid: NWD, number: 01, name: SCS01, host: chn-mumsap02sid: NWD, number: 00, name: DVEBMGS00, host: chn-mumsap02
INFO 2006-02-06 12:39:22
Looking for SAP system instances installed on this host...
INFO 2006-02-06 12:39:24
Found these instances: sid: NWD, number: 01, name: SCS01, host: chn-mumsap02sid: NWD, number: 00, name: DVEBMGS00, host: chn-mumsap02
INFO 2006-02-06 12:39:24
Copying file C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/java.log to: C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/java.1.log.
INFO 2006-02-06 12:39:24
Copying file C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/java.log to: C:/Program Files/sapinst_instdir/NW04SR1/CMC/KMC/java.1.log.
INFO 2006-02-06 12:39:24
Creating file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\java.1.log.
INFO 2006-02-06 12:39:24
Removing file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\java.log.
INFO 2006-02-06 12:39:24
Creating file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\java.log.
INFO 2006-02-06 12:39:24
Working directory changed to G:/Comp/EP-KMC/ANALYZER.
INFO 2006-02-06 12:39:24
Working directory changed to C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC.
INFO 2006-02-06 12:39:24
Output of C:\j2sdk1.4.2_08\jre/bin/java '-classpath' 'G:/Comp/EP-KMC/ANALYZER/analyzer.jar;E:/usr/sap/NWD/DVEBMG1/j2ee/cluster/server0/bin/ext/SAPXML1/SAPXML~1.JAR' '-Dj2ee.path=E:\usr\sap\NWD\DVEBMGS00\j2ee' '-Dj2ee.userName=j2ee_admin' 'XXXXXX' '-DMainClass=com.sapportals.utilities.analyzer.ui.console.MainConsole' '-DappendRelativePath=E:\usr\sap\NWD\DVEBMGS00\j2ee' 'com.sapportals.utilities.analyzer.ui.Launcher' 'C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC/analyzerResults.htm' '-e' '/' '-i' 'KMC/Portal Existence' is written to the logfile java.log.
INFO 2006-02-06 12:39:26
Execution of the command "C:\j2sdk1.4.2_08\jre/bin/java '-classpath' 'G:/Comp/EP-KMC/ANALYZER/analyzer.jar;E:/usr/sap/NWD/DVEBMG1/j2ee/cluster/server0/bin/ext/SAPXML1/SAPXML~1.JAR' '-Dj2ee.path=E:\usr\sap\NWD\DVEBMGS00\j2ee' '-Dj2ee.userName=j2ee_admin' 'XXXXXX' '-DMainClass=com.sapportals.utilities.analyzer.ui.console.MainConsole' '-DappendRelativePath=E:\usr\sap\NWD\DVEBMGS00\j2ee' 'com.sapportals.utilities.analyzer.ui.Launcher' 'C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC/analyzerResults.htm' '-e' '/' '-i' 'KMC/Portal Existence'" finished with return code 0. Output: file:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/services/appclient/appclient.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/boot/boot.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/system/bytecode.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/services/configuration/configuration.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/interfaces/cross/cross_api.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/services/dbpool/dbpool.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/dispatcher/bin/system/exception.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/system/frame.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/system/iq-lib.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/boot/jaas.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/interfaces/log/log_api.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/system/logging.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/services/naming/naming.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/services/p4/p4.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/ext/sapxmltoolkit/sapxmltoolkit.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/services/security/security.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/interfaces/security/security_api.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/system/util.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/services/deploy/deploy.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/cluster/server0/bin/interfaces/container/container_api.jarfile:/E:/usr/sap/NWD/DVEBMGS00/j2ee/admin/lib/admin.jar
INFO 2006-02-06 12:39:26
Looking for SAP system instances installed on this host...
INFO 2006-02-06 12:39:28
Found these instances: sid: NWD, number: 01, name: SCS01, host: chn-mumsap02sid: NWD, number: 00, name: DVEBMGS00, host: chn-mumsap02
INFO 2006-02-06 12:39:53
RFC parameter CLIENT set to value 000.
INFO 2006-02-06 12:39:53
RFC parameter USER set to value DDIC.
INFO 2006-02-06 12:39:53
RFC parameter LCHECK set to value 1.
INFO 2006-02-06 12:39:53
RFC parameter PCS set to value 1.
INFO 2006-02-06 12:39:53
RFC parameter LANG set to value EN.
INFO 2006-02-06 12:39:53
RFC parameter ASHOST set to value chn-mumsap02.
INFO 2006-02-06 12:39:53
RFC parameter SYSNR set to value 00.
INFO 2006-02-06 12:39:53
RFC connection is logged in file 'rfc#####_#####.trc'.
INFO 2006-02-06 12:39:53
RFC parameter TRACE set to value 1.
INFO 2006-02-06 12:39:53
RFC connection information checked successfully.
INFO 2006-02-06 12:39:53
RFC connection opened successfully.
INFO 2006-02-06 12:39:53
Setting new application function RFC_SYSTEM_INFO.
INFO 2006-02-06 12:39:53
Generating interface for remote function.
INFO 2006-02-06 12:39:53
Function call was successful.
INFO 2006-02-06 12:39:53
Function interface generated successfully.
INFO 2006-02-06 12:39:53
Technical properties of function set successfully.
INFO 2006-02-06 12:39:53
Information for application function RFC_SYSTEM_INFO copied to local Repository.
INFO 2006-02-06 12:39:53
Function module RFC_SYSTEM_INFO set successfully.
INFO 2006-02-06 12:39:53
Executing function call RFC_SYSTEM_INFO.
INFO 2006-02-06 12:39:54
Function call was successful.
INFO 2006-02-06 12:39:54
Version 640 of remote SAP System NWD accepted.
INFO 2006-02-06 12:41:37
Creating file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\summary.html.
PHASE 2006-02-06 12:41:37
Deployment of Basis functionality for Integration Server
INFO 2006-02-06 12:41:38
Creating file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\msclients.exe.log.
INFO 2006-02-06 12:41:38
Working directory changed to C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC.
INFO 2006-02-06 12:41:38
Output of E:\usr\sap\NWD\SYS\exe\run/msclients.exe '-mshost' 'chn-mumsap02' '-msserv' '3601' is written to the logfile msclients.exe.log.
INFO 2006-02-06 12:41:42
Execution of the command "E:\usr\sap\NWD\SYS\exe\run/msclients.exe '-mshost' 'chn-mumsap02' '-msserv' '3601'" finished with return code 0. Output:
INFO 2006-02-06 12:41:42
Creating file C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC\jcmon.exe.log.
INFO 2006-02-06 12:41:42
Working directory changed to C:\Program Files\sapinst_instdir\NW04SR1\CMC\KMC.
INFO 2006-02-06 12:41:42
Output of E:\usr\sap/NWD/DVEBMGS00/j2ee/os_libs/jcmon.exe 'pf=E:\usr\sap\NWD\SYS\profile/NWD_DVEBMGS00_chn-mumsap02' is written to the logfile jcmon.exe.log.
INFO 2006-02-06 12:41:45
Execution of the command "E:\usr\sap/NWD/DVEBMGS00/j2ee/os_libs/jcmon.exe 'pf=E:\usr\sap\NWD\SYS\profile/NWD_DVEBMGS00_chn-mumsap02'" finished with return code 0. Output: snipped
ERROR 2006-02-06 12:41:47
FJS-00003 TypeError: node has no properties (in script InstallationScript_31, line 12683: ???)
ERROR 2006-02-06 12:41:51
FJS-00003 TypeError: node has no properties (in script InstallationScript_32, line 12683: ???)

Hi Anand,
I could not see any folder of name java.1.log but got a file with same same, here is content:
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
output of jcmon.exe.log is:
============================================================
JControl Monitor Program - Main Menue
============================================================
0 : exit
10 : Cluster Administration Menue
20 : Local Administration Menue
command =>
SAP System Name   : NWD
SAP System        : 00
MS Host           : chn-mumsap02
MS Port           : 3601
Process Count     : 3
PID of JControl   : 3928
State of JControl : All processes running
State inside MS   : All processes running
Run Mode          : Normal Mode
Admin URL         :
Idx
Name
PID
State
Error
Restart
0
dispatcher
3552
Running
0
yes
1
server0
3444
Running
0
yes
2
SDM
3600
Running
0
yes
============================================================
JControl Monitor Program - Administration Menue (Local)
Instance : JC_chn-mumsap02_NWD_00
============================================================
0 : exit
1 : Refresh list
2 : Shutdown instance
3 : Enable process
4 : Disable process
5 : Restart process
6 : Enable bootstrapping on restart
7 : Disable bootstrapping on restart
8 : Enable debugging
9 : Disable debugging
10 : Dump stacktrace
11 : Process list
12 : Port list
13 : Activate debug session
14 : Deactivate debug session
15 : Increment trace level
16 : Decrement trace level
17 : Enable process restart
18 : Disable process restart
98 : Synchronize instance properties
99 : Extended process list on/off
command =>
============================================================
JControl Monitor Program - Main Menue
============================================================
0 : exit
10 : Cluster Administration Menue
20 : Local Administration Menue

Urgent help please. Can't get image on LED cinema display.

My husband has a traumatic brain injury. His existing monitor went kaput yesterday, & I've been trying desperately to set up a new LED cinema display with his Mac Pro that was purchased May 2007 for the past 4.5 hrs without success. Can't get any image on it & don't know what else to try. Any suggestions please?

Can we assume that the graphics card has been replaced with one that has a mini display port, such as the Radeon HD 5770 or the Geforce GT 120? The originally shipped graphics card options for the 2007 Mac Pro do NOT have the Mini Display Port.
Does my computer have a Mini DisplayPort connector?
If not, one will either need an Atlona AT-DP400 adapter to connect the LED Cinema Display to a dual link DVI port of the graphics card OR to replace the graphics card with one that is equipped with the Mini Display Port.
Review of the Atlona AT-DP400.
Also, does the Mac Pro have OS X 10.6.4 or later?

Urgent help : printjob() problem

hi,
when i used printjob class for printing pages. in print
option window print range selection is disabled. that means i am
not able to print specific pages. for example 2-5 pages.
i am using following code for printing. it's printing all the
pages.
var my_pj = new PrintJob();
if (my_pj.start()) {
for (var i = 0; i<_root.iPages; i++) {
var x = MainPrint["prints"+i]._xscale;
var y = MainPrint["prints"+i]._yscale;
MainPrint["prints"+i]._xscale = 86;
MainPrint["prints"+i]._yscale = 92;
my_pj.addPage(MainPrint["prints"+i], {xMin:0, xMax:860,
yMin:0, yMax:810});
MainPrint["prints"+i]._xscale = x;
MainPrint["prints"+i]._yscale = y;
my_pj.send();
delete my_pj;

Hi,
You need to activate the new workflows u have created. If u want to test the workflow in thin client, then manually import the workflow in active workflow process and try to simulate.
This error will occur if the workflow is not "ACTIVE" in the active workflow process under Administration - Business Process.
Regards,
Joseph
Edited by: Joseph ArulDass on Jul 14, 2010 3:47 PM
Edited by: Joseph ArulDass on Jul 14, 2010 3:56 PM

'Incompatible Codec' Preventing Edit To Tape - Getting Annoyed Now!

Okay, this should be a really simple procedure - I have a 30 second TV commercial to master from the timeline to a Digibeta A500 VTR. The project is set to Blackmagic PAL 10-bit, as is the timeline and the view output. The video card (Blackmagic Decklink HD) is providing the Digibeta with an audio/video muxed SDI feed and machine control via RS422. The output of the A500 shows the Blackmagic card is feeding it pictures from the timeline just fine. Here comes the problem - on opening Edit To Tape to do a master with frame-accurate timecode FCP insists that it cannot playout the timeline as the timeline settings and the output settings are different codecs... yet the entire process is simply uncompressed 10-bit PAL. FCP suggests I re-render in a new timeline with 'the correct codec' but this doesn't help. No one here or at my system supplier can figure out what's up with the thing, I don't fancy sending out a TX master crash-recorded with a 'guesstimated' timecode track but failing that I'm screwed...
...any suggestions which miniscule and forgotten setting might be causing this?
Cheers,
Tom

Hiya - Sorry guys I should have made myself clearer. I have already been doing the drag of the timeline to the 'assemble' pop up in the ETT window and this was when the 'incompatible compression setting' error came up.
I think I have got past this issue now - it seems that the 'Blackmagic PAL 10-bit' preset is actually 5:4 aspect ratio by default which is ever so slightly different to regular 4:3 the card itself is trying to output - strangely though I get realtime playback off the timeline with this default setup but not via ETT (which annoyingly insists on spending 10 minutes 'writing video' before every master I run off - is there a way to get it to save the video file it has written for ETT output?)
It was only on the fourth attempt that I managed to get ETT to output both video and audio together - the first three attempts it only output the audio tracks. Bizarre? Lastly the timecode is off by one frame - i.e. the beginning frame of the commercial is coming in at 10:00:00:01. Could this be a dropped frame or do I need to change the pre-roll settings for ETT somewhere (can I do this?)
Cheers for your help so far guys!
Tom

Urgent Help Installation Problems (It's getting annoying now... been over a year)

Similar Messages

Maybe you are looking for