Urgent help: L3 daughter card for Nexus 5548

Hi
We have 2 Nexus 5548 which is in one vPC doamin. All the servers are teamed to these switches
Requirement
We have to install New L3 daughter card.(N55-D160L3-V2(=))
I have gone through the Cisco websites and found that we have to do the following things
1. software version:
i Nexus 5548P Daughter Card (N55-D160L3)
Before installing a Layer 3 daughter card (N55-D160L3) into a Cisco Nexus 5548P switch, you must upgrade to Cisco NX-OS Release 5.0(3)N1(1b) or NX-OS Release 5.0(3)N1(1c) and then install the card into the chassis. 
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_5_0_3_N2_1/Nexus5000_Release_Notes_5_0_3_N2.html
2. license: 
Also in order to enable this module following license should present on N5k device:
LAN_BASE_SERVICES_PKG  - it's free and lifetime.
https://supportforums.cisco.com/thread/2121574 
I have 2 questions
1- In cisco documentation its says that these cards will be installed in the front where I/O module is and after NX OS 5.X they are hot swappable
Does that mean that no reboot will be required after installing this module (keeping in mind its the first time) so i am confused about the wording ???
Does license installation requires reboot??? in short if you are installing for the first time do we require a reboot ???? that is my main question
2- I have heard there is  a known bug which keep rebooting the switch after installation of L3 card
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl45495
has that been address in any version of license or NS-OS yet???
Thanks heaps guys
If the module is still offline when the requirements are met above, it could be a bug.(CSCtl45495) Try reloading the switch.

1- In cisco documentation its says that these cards will be installed in the front where I/O module is and after NX OS 5.X they are hot swappable
Does that mean that no reboot will be required after installing this module (keeping in mind its the first time) so i am confused about the wording ???
Answer: -- Yes no reboot is required.
Does license installation requires reboot??? in short if you are installing for the first time do we require a reboot ???? that is my main question
Answer: As you are installing the license for the first time reboot of the box is not required.
2- I have heard there is  a known bug which keep rebooting the switch after installation of L3 card
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl45495
has that been address in any version of license or NS-OS yet???
Answer;--No this is not fixed yet.
HTH
Regards
Inayath
********Please do not forget to rate the post if this info is helpfull.

Similar Messages

  • Configuring FET-10G-SR for NEXUS 5548/2248

    Hey everyone-
    I am a little newer with configuring switches and routers, and I have been asked to troubleshoot a FET-10G-SR in our NEXUS 5548 and NEXUS 2248.  I am aware that the ports need to be configured to except FET parts, and I have tried using the "switchport mode fex-fabric" command to configure the ports, but the command will not work for some reason. Can anyone help me with configurations step by step to have these parts work properly? Any help will be greatly appreciated. Thank you!
    Chris Hazell

    It should normally work unless the port is not the proper type of has a configuraiton applied that's incompatible.
    Can you provide the output for "show run int eth ___" and "show int eth___" (substituting your interface number for the "___") for the interface in question?
    Also, if it's the first fex you are adding, you must have enabled "feature fex" globally.

  • Need help with video card for my dual 1.8 G5

    Ok, I've spent the last hour and a half searching around and really haven't found what I was looking for, although, it's probably right under my nose and I'm a moron. Anyways, here goes...
    I have a dual 1.8 G5 and I'd like to add an extra video card. From what I've read, the "stock" location for the video card is AGP, but all three of the other expansion slots are all PCI-X, is that correct? I also, thought I had read that a Radeon 9200 PCI or a Sonnet Sonata SD will work in the PCI-X slot, is that true for just those particular video cards or will any PCI card work? If that's not the case, does any body know what options I have? I've spent a lot of time lurking on these forums and you guys have helped tremendously in the past, so I thank you in advance for any help you guys can give.
    Aaron

    Hi,
    That G5 Mac will accommodate 66/33MHz Mac Edition PCI cards.
    •The Sonnet Sonata is a 16MB VRAM card and will work in either a 33 or 66MHz slot, so it's okay. Slow, but okay.
    •The ATI RADEON 9200 PRO 128MB MAC EDITION PCI card is a better choice because it has 128MB VRAM and is much faster. Unfortunately it's difficult to find new ones at the moment. There are several used ones on Fleabay right now for under $89.
    •There are other PCI cards that will work too, like the ATI Radeon 7000 Mac Edition 32MB PCI model as seen on Fleabay as item # 200046086081. That's probably your cheapest choice.
    Just make SURE you get a Mac Edition, a PC type will not work.
    Adding another PCI card will have zero effect on graphic performance of the AGP video card. Each AGP or PCI slot stands alone, and will only affect the monitor it's attached to. PCI slots are much slower than AGP slots (8X slower) in G5's.
    Regards,
    Dave

  • Urgent help required...for replacing JSP session variables

    I am trying to enhance the performance of a j2ee based webapp which use session variables to store the data...
    Is there any alternative for session variables..The project is based on j2ee-Struts frame work..But the amount of code maintainance should be minimum ....so i can't create beanforms for all these data...
    Is there any XML based methods available...??

    ok... thanks... i created a fla file and inthe action script
    pasted the following code
    var nc:NetConnection = new NetConnection();
    nc.connect("rtmp://flash.ispstream.com/ondemand/unikron/my_video_dj/");
    var ns:NetStream = new NetStream(nc);
    contentMain.myVideo.attachVideo(ns);
    ns.setBufferTime(5);
    ns.play("dvd_r");
    nothing is working if i tried to load... can u help me out

  • URGENT HELP REQUIRED - E-filing for GB - IMG CONFIG

    Hi
    We are on ECC 6.0 and have just installed XI. I am trying to complete the SAP IMG Config, however there is limited documentation about this, particularly the constants and e-mail content.
    Does anyone have any useful (ideally step by step) documentation on how to complete the customisation?
    Your URGENT assistance is greatly appreciated.
    Thanks
    Michelle

    Hi refer theses links
    http://help.sap.com/saphelp_erp2005/helpdata/en/cd/5a0641f753f523e10000000a155106/frameset.htm
    EOY2007 GB (E-Filing)

  • Urgent Help in User-Exit for MM!

    Hi,
    1.  I am writing code in the Exit "EXIT_SAPLMGMU_001".
    2.  I have to pop-up error/warning messages for incorrect data entered in various fields/screens/views of MM01/MM02 transaction.
    3.  The Exit gets triggered when i press "SAVE" after modification.
    4.  When I create the Classification View, i enter the class type as "001" for material class.
    5.  Then i need to enter a value "Z_Product" in the class column(on the screen in classification view). This class is the "Product Class" (description).
          My problem is to find this value that i enter on screen before "Save" i.e. when i am creating material for the first time in MM01, i dont want the error message to pop-up if i am entering any value in the class column and  also entering values in the internal characteristics for that class.
          Basically i want to read the values (before "SAVe") entered in the class column as well as want to know the values for the internal characteristics of the class.
          For Class, the std. field is "RMCLF-Class" , but i have no buffer field available in my exit that contains the value for the Class. I have also tried using "Get parameter ID", but it doesnt work.
          For Internal Characteristic values (of the class) that are entered in the tab(that appears on pressing "Enter" after filling the Class value) below the Class tab, i am fetching data from std. table AUSP to check for corresponding entries for that particular material number....but this table will get updated only after "SAVE" and so i would be able to read the values only in MM02.
    Please help me in finding out a way for reading the class values & Characteristic values in my user-exit.
    Thanks & Regards,
    Tejas

    Hi Ronak.
    You can try with <b>'EXIT_SAPLCLFM_002'  (CLFM0002)</b>. This is the exit for the classification view. You can get this for the transaction CL22N / CL24N.
    This is also called in MM01 for classification values. This classification details are cross application components. So This is also called from other transaction.
    Regards
    Rusidar.

  • Really urgent: help in making report for status of vendor payement

    Hi,
    I am making a report in which i have to display the status of vendor whether it is paid or not?
    Till now i am able to have knowledge that when we do MIGO there are the Financial Documents form there i get the account no.. whichit is stored in the BKPF table. From there we have the account no... and after that there are 4 tables into which i have to look after the tables i.e. BSAS,BSIK,BSIS, n BSAK.
    Plzz tell me how should i make a report as the Acount no.. have to move among these tables to get the status of it pament.
    plzz provide me some guidelines for making a report for it as help will be deifnately rewarded.
    Edited by: abaper2008 on May 21, 2008 6:52 AM

    Hi,
    Hi,
    I making a report in which i have to display the vendor payment is done or not?
    Curently i am using the 4 tables of Financial :-
    BSAK,BSIS,BSIK AND BSAS which gives the status of vendor whether it is paid or not . 1 thing i observed that data compared wit htew MKPF table among these tables(BSAS,BSIK N BSAK) is not coming right as i am taking common field XBLNR among them all .
    One more thing i observed that BLART is getting changed in each table.
    for instance,
    if the BLART is WE for material document and i am taking XBLNR filed from this table MKPF and den looking XBLNR in BKPF where the entry consist of BLART - RE n WE and finally when i look up in the BSAK table the field consist of RE .
    How can i see that it is being paid or not the BLART is keep on changing.
    Plzz proivde me guidelines as how to rectify the problem?
    Edited by: abaper2008 on May 21, 2008 9:03 AM

  • Need urgent help on iOS 8 for iPhone 4S. I am unable to start my device after the update

    Friends,
    I wanted to upgrade to iOS8 on my iPhone 4S. I was not connected to iTunes. Clicked install while I was on a WiFi connection.
    Post that I tried restarting and it is showing a pictorial diagram asking me to connect to iTunes.
    I connected to iTunes and now it is asking me to restore. After going ahead with restore it is saying device can't be found.
    I am really worried. Can anybody help me here.
    Thank you.
    Amol
    <Personal Information Edited By Host>

    Hey Amol B,
    Thanks for the question. I understand you are experiencing issues updating/restoring your iPhone. Let’s try forcing the device intro recovery mode once more:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    If your device is not recognized while in recovery mode, see the following resource (specifically Step 5, sub step “If the device is not recognized while in Recovery Mode”):
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Urgent Help on Smart Card

    Hi Friends
    I have a javacard application which write and reads to/from the smartcard.My card supports Javacard 2.2.1 and GP 2.1.1 ,but from my experience it seems no supporting GP( it is not working GPShell sowing 6d00 error and also giving error under mode_211)
    I converted my class file to a cap file .I was using Netbeans.Now i changed to Eclipse (galileo_jee) with Eclipsejcde plugin.I can convert to cap file from eclipse.I use compiler options as :
    Compiler Compliance level 1.3
    Source code compatibility 1.3
    Generated .class file compatibilty 1.1
    We can convert to a cap file through eclipse .I can run GPShell script (Ant script) using Eclipse and load the cap file to the smart card, but when i ran the following script .I am getting 6d00 error .
    So I moved to Smart card shell(SC Shell):
    It contains some javascript function to install the cap file to smart acrd and read some messages from FORUM that some peoples have successfully installed using Smart Card Shell.When i tried to install my cap file it is loading the file to smart card(I am able to see) ,but giving an error message at the end of install method as 6A80.The APDU trace i have pasted next message.Continue....
    Thanks

    Please note : Followed from 1st message...
    00 C: 00 A4 04 00 - SELECT Lc=8
    0005 A0 00 00 00 03 00 00 00 ........
    Le=0
    R: SW1/SW2=9000 (Normal processing: No error) Lr=27
    0000 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E o........... ..n
    0010 06 10 01 76 DE 00 05 9F 65 01 7F ...v ...e..
    00 C: 80 50 00 00 - UNKNOWN_INS Lc=8
    0005 C1 A2 EF A2 26 4F 8F 06 &O..
    Le=0
    R: SW1/SW2=9000 (Normal processing: No error) Lr=28
    0000 00 00 71 18 02 02 1D 3D 33 F6 FF 01 6E D2 BC C7 ..q....=3 .n&#1212;
    0010 4B B3 B9 43 40 2F 7F D2 EB CF 5D FB K C@/. ] 00 C: 84 82 00 00 - UNKNOWN_INS Lc=16
    0005 64 EC 0F 28 6E F8 3A 80 DD B7 4D 8E BA A9 36 09 d .(n :.&#1911;M. 6.
    R: SW1/SW2=9000 (Normal processing: No error) Lr=0
    00 C: 80 E4 00 00 - UNKNOWN_INS Lc=14
    0005 4F 0C 01 02 03 04 05 06 07 08 09 00 00 01 O.............
    Le=0
    R: SW1/SW2=6A88 (Checking error: Reference data not found) Lr=0
    00 C: 80 E4 00 00 - UNKNOWN_INS Lc=12
    0005 4F 0A 01 02 03 04 05 06 07 08 09 00 O...........
    Le=0
    R: SW1/SW2=9000 (Normal processing: No error) Lr=0
    00 C: 80 E6 02 00 - UNKNOWN_INS Lc=23
    0005 0A 01 02 03 04 05 06 07 08 09 00 08 A0 00 00 00 ................
    0015 03 00 00 00 00 00 00 .......
    Le=0
    R: SW1/SW2=9000 (Normal processing: No error) Lr=0
    00 C: 80 E8 00 00 - UNKNOWN_INS Lc=255
    0005 C4 82 02 9D 01 00 14 DE CA FF ED 01 02 04 00 01 ...... .....
    0015 0A 01 02 03 04 05 06 07 08 09 00 02 00 1F 00 14 ................
    0025 00 1F 00 0F 00 0B 00 3E 00 0E 01 2A 00 0A 00 23 .......>...*...#
    0035 00 00 00 8F 00 02 00 00 00 00 01 01 00 04 00 0B ................
    0045 01 02 01 07 A0 00 00 00 62 01 01 03 00 0F 01 0B ........b.......
    0055 01 02 03 04 05 06 07 08 09 00 00 00 08 06 00 0E ................
    0065 00 80 03 00 FF 00 07 02 00 00 00 1C 01 0D 07 01 .... ...........
    0075 2A 00 01 10 18 8C 00 00 7A 02 30 10 09 90 0B 7F *.......z.0.....
    0085 00 01 8F 00 02 3D 8C 00 03 8B 00 04 7A 02 21 19 .....=......z.!.
    0095 8B 00 05 2D 1A 03 25 10 80 6B 28 1A 04 25 73 00 ...-..%..k(..%s.
    00A5 1B 00 02 00 04 00 0D 00 1B 00 14 18 19 8C 00 06 ................
    00B5 70 17 18 19 8C 00 07 70 10 11 6D 00 8D 00 08 70 p......p..m....p
    00C5 08 11 6E 00 8D 00 08 7A 04 23 19 8B 00 05 2D 1A ..n....z.#....-.
    00D5 05 25 60 08 11 6B 00 8D 00 08 1A 06 25 11 00 FF .%`..k......%..
    00E5 53 32 1F 10 09 6C 08 11 6B 00 8D 00 08 1A 07 25 S2...l..k......%
    00F5 11 00 FF 53 29 04 16 04 10 09 6F 08 11 67 00 .. S).....o..g.
    Le=0
    R: SW1/SW2=9000 (Normal processing: No error) Lr=0
    00 C: 80 E8 00 01 - UNKNOWN_INS Lc=255
    0005 8D 00 08 16 04 61 08 11 67 00 8D 00 08 19 8B 00 .....a..g.......
    0015 09 3B 19 16 04 8B 00 0A 19 7B 00 01 1F 16 04 8B .;.......{......
    0025 00 0B 7A 05 23 19 8B 00 05 2D 1A 05 25 60 08 11 ..z.#....-..%`..
    0035 6B 00 8D 00 08 1A 06 25 11 00 FF 53 32 1F 10 09 k......%.. S2...
    0045 6C 08 11 6B 00 8D 00 08 1A 07 25 11 00 FF 53 29 l..k......%.. S)
    0055 04 16 04 10 09 6F 08 11 67 00 8D 00 08 16 04 61 .....o..g......a
    0065 08 11 67 00 8D 00 08 18 19 8B 00 0C 1A 08 7B 00 ..g...........{.
    0075 01 1F 16 04 8D 00 0D 3B 11 90 00 8D 00 08 7A 02 .......;......z.
    0085 22 19 8B 00 05 2D 1A 07 25 11 00 FF 53 32 1F 19 "....-..%.. S2..
    0095 8B 00 0E 6A 08 11 67 00 8D 00 08 7A 08 00 0A 00 ...j..g....z....
    00A5 02 00 01 00 00 00 00 00 00 05 00 3E 00 0F 06 80 ...........>....
    00B5 03 00 05 00 00 00 01 00 00 00 06 00 00 01 03 80 ................
    00C5 03 01 03 80 0A 01 06 00 00 57 06 00 00 B1 06 80 .........W... ..
    00D5 07 01 03 80 0A 07 03 80 0A 09 03 80 0A 05 03 00 ................
    00E5 00 08 06 80 10 01 03 80 0A 06 09 00 23 00 00 00 ............#...
    00F5 1F 05 0A 03 04 03 07 1D 07 08 08 07 0C 13 15 ...............
    Le=0
    R: SW1/SW2=9000 (Normal processing: No error) Lr=0
    00 C: 80 E8 80 02 - UNKNOWN_INS Lc=163
    0005 0A 04 07 04 06 07 0C 13 15 0A 05 05 06 07 07 0E ................
    0015 08 0B 00 8F 01 00 01 00 00 00 00 01 00 06 FF 08 .............. .
    0025 00 00 00 00 22 FF 82 00 01 00 20 00 05 00 00 00 ...." .... .....
    0035 00 00 09 00 08 00 33 00 12 00 00 00 00 07 01 00 ......3.........
    0045 1C 00 24 00 39 00 00 00 00 FF 02 00 57 00 24 00 ..$.9.... ..W.$.
    0055 58 00 00 00 00 FF 02 00 B1 00 24 00 5A 00 00 00 X.... .. .$.Z...
    0065 00 08 01 01 0D 00 24 00 1B 00 00 00 00 00 0F 00 ......$.........
    0075 20 00 22 FF FF 00 20 00 20 00 22 00 24 00 24 00 ." . . .".$.$.
    0085 28 00 2A 00 28 00 2C 00 24 00 2F 00 2A 01 10 01 (.*.(.,.$./.*...
    0095 B0 06 68 00 A1 02 41 01 40 04 B4 41 06 B4 B4 44 .h. .A.@. A. D
    00A5 04 B4 31 . 1
    Le=0
    R: SW1/SW2=9000 (Normal processing: No error) Lr=0
    00 C: 80 E6 0C 00 - UNKNOWN_INS Lc=42
    0005 0A 01 02 03 04 05 06 07 08 09 00 0B 01 02 03 04 ................
    0015 05 06 07 08 09 00 00 0C 01 02 03 04 05 06 07 08 ................
    0025 09 00 00 01 01 07 02 C9 00 00 ....... ..
    Le=0
    R: SW1/SW2=6A80 (Checking error: Incorrect parameter in the command data field) Lr=0
    Please help me reagrding this.Fighting with this over 1 month.Someone Kindly help me to solve this error.I tried the following:
    1) I have read from some forum that if we replace the import.cap with original import.cap file,it will solve the probs.Eventhough it is not the rite method , i thought i can use it now.My import.cap file will be having the content as below.
    04 00 0b 01 02 01 07 a0 00 00 00 62 01 01 and the original cap file will be having 04 00 0b 01 00 01 07 a0 00 00 00 62 01 01
    2) Checked the applet and package AIDs are same.
    3) Checked with the empty methods (without any code in the applet file).had register method in applet constructor also called constructor from install method.
    4)Checked from command prompt ,same problem exist.
    Can anybody help please.i m really in trouble.My time is limited .Please go through my code.In next post ,i will post my code also and missing anything .If anybody wants to test cap file,i wills send tha cap file also.

  • Urgent help on  new patches for india localisation..

    Hi all ,
    My instance is 11.5.9 is at india localisation level 105D2.
    I have to upgrade it for Cess, Service and Vat tax.
    Please suggest me which all patches i need to apply.
    Is there any issue in upgrading for Cess, Service and Vat tax at 105D2 level.
    Regrads
    shashi bhushan
    [email protected]

    Hello,
    you will absolutelly need a JAVA stack to use Adobe Forms. It can be a double stack installation, or a stand alone JAVA installation of the same release connected to the ABAP.
    Best regards,
    Dezso Pap

  • Urgent help on installation ECC for forms

    Hi ,
    I am in new a cutomer site on upgrade to ECC. I have the functionality of Interactive forms to be incorpoarated Can I ask them for WAS ABAP stack alone or should I have both ABAP and Java Stack ..
    Regards
    Abhilash

    Hello,
    you will absolutelly need a JAVA stack to use Adobe Forms. It can be a double stack installation, or a stand alone JAVA installation of the same release connected to the ABAP.
    Best regards,
    Dezso Pap

  • Need urgent help with Ifs1.1 on Solaris

    We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
    Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
    What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
    By the way:
    Where do I have to start CTX on the IFS- or the Oracle-Side?
    null

    Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
    Additionally it is strange, that we are still able to connect to the database via SqlPlus.
    IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
    maybe it can help?!
    Mon Dec 04 23:12:20 CET 2000
    Server STARTED: IfsAgents(19944) not managed
    Attempting to load agent EventExchangerAgent
    Agent EventExchangerAgent loaded
    Server STARTED: IfsProtocols(19945) not managed
    Attempting to start agent EventExchangerAgent
    EventExchangerAgent: Start request
    Agent EventExchangerAgent started
    Attempting to load agent ExpirationAgent
    Agent ExpirationAgent loaded
    EventExchangerAgent: starting timer
    Attempting to start agent ExpirationAgent
    ExpirationAgent: Start request
    Agent ExpirationAgent started
    Attempting to load agent GarbageCollectionAgent
    Agent GarbageCollectionAgent loaded
    ExpirationAgent: computed initial delay (in ms) is: 10024504
    ExpirationAgent: starting timer
    Attempting to start agent GarbageCollectionAgent
    GarbageCollectionAgent: Start request
    Agent GarbageCollectionAgent started
    Attempting to load agent ContentGarbageCollectionAgent
    Agent ContentGarbageCollectionAgent loaded
    GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
    GarbageCollectionAgent: starting timer
    Attempting to start agent ContentGarbageCollectionAgent
    ContentGarbageCollectionAgent: Start request
    Agent ContentGarbageCollectionAgent started
    Attempting to load agent DanglingObjectAVCleanupAgent
    Agent DanglingObjectAVCleanupAgent loaded
    ContentGarbageCollectionAgent: starting timer
    Attempting to start agent DanglingObjectAVCleanupAgent
    DanglingObjectAVCleanupAgent: Start request
    Agent DanglingObjectAVCleanupAgent started
    Attempting to load agent OutboxAgent
    Agent OutboxAgent loaded
    DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
    DanglingObjectAVCleanupAgent: starting timer
    Attempting to start agent OutboxAgent
    OutboxAgent: Start request
    Agent OutboxAgent started
    Attempting to load agent ServiceWatchdogAgent
    Agent ServiceWatchdogAgent loaded
    OutboxAgent: Done processing
    Attempting to start agent ServiceWatchdogAgent
    ServiceWatchdogAgent: Start request
    Agent ServiceWatchdogAgent started
    Attempting to load agent QuotaAgent
    Agent QuotaAgent loaded
    ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
    ServiceWatchdogAgent: starting timer
    Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Attempting to start agent QuotaAgent
    QuotaAgent: Start request
    Agent QuotaAgent started
    QuotaAgent: starting timer
    Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Freeing unlocked server 19687
    ServiceWatchdogAgent: Freeing unlocked server 19666
    Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freeing unlocked server 19723
    ServiceWatchdogAgent: Freeing unlocked server 19520
    Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
    Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freeing unlocked server 19519
    Server STOPPED: IfsAgents(19520) not managed
    ServiceWatchdogAgent: Freeing unlocked server 19712
    Server STOPPED: IfsProtocols(19519) not managed
    Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    QuotaAgent: Timer event: 0 active; 0 exceeded
    ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
    QuotaAgent: Timer event: 0 active; 0 exceeded
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException in checkForDeadServices():
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException in handle loop; continuing:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    null

  • Nexus 5548 Layer 3 daughter card insertion

    Hello there,
    I am planning to install Nexus 5548 Layer 3 daughter card. I found the hardware removal procedure on Cisco website but it doesn't say whether it's hot plugged or not. (Since I've to remove existing L2 module so I guess the box needs to be powered off but not sure). Has anybody had the experience in doing the upgrade to share?
    Thanks in advance
    Regards,
    Chinnawoot 
    PS. Detail of the running system
    Cisco Nexus Operating System (NX-OS) Software
    TAC support: http://www.cisco.com/tac
    Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
    The copyrights to certain works contained in this software are
    owned by other third parties and used and distributed under
    license. Certain components of this software are licensed under
    the GNU General Public License (GPL) version 2.0 or the GNU
    Lesser General Public License (LGPL) Version 2.1. A copy of each
    such license is available at
    http://www.opensource.org/licenses/gpl-2.0.php and
    http://www.opensource.org/licenses/lgpl-2.1.php
    AUUT05TRUSDS03# show ver
    Cisco Nexus Operating System (NX-OS) Software
    TAC support: http://www.cisco.com/tac
    Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
    Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
    The copyrights to certain works contained herein are owned by
    other third parties and are used and distributed under license.
    Some parts of this software are covered under the GNU Public
    License. A copy of the license is available at
    http://www.gnu.org/licenses/gpl.html.
    Software
      BIOS:      version 3.6.0
      loader:    version N/A
      kickstart: version 7.0(1)N1(1)
      system:    version 7.0(1)N1(1)
      Power Sequencer Firmware:
                 Module 1: version v2.0
                 Module 3: version v2.0
      Microcontroller Firmware:        version v1.2.0.1
      SFP uC:    Module 1: v1.0.0.0
      QSFP uC:   Module not detected
      BIOS compile time:       05/09/2012
      kickstart image file is: bootflash:///n5000-uk9-kickstart.7.0.1.N1.1.bin
      kickstart compile time:  3/19/2014 14:00:00 [03/20/2014 10:09:46]
      system image file is:    bootflash:///n5000-uk9.7.0.1.N1.1.bin
      system compile time:     3/19/2014 14:00:00 [03/20/2014 13:54:43]
    Hardware
      cisco Nexus5548 Chassis ("O2 32X10GE/Modular Universal Platform Supervisor")
      Intel(R) Xeon(R) CPU         with 8253860 kB of memory.
      Processor Board ID FOC172441CQ
      Device name: AUUT05TRUSDS03
      bootflash:    1966080 kB
    Kernel uptime is 172 day(s), 21 hour(s), 56 minute(s), 9 second(s)
    Last reset at 126063 usecs after  Wed May 21 12:35:50 2014
      Reason: Reset Requested by CLI command reload
      System version: 7.0(1)N1(1)
      Service: power-sequence cycled
    plugin
      Core Plugin, Ethernet Plugin
    AUUT05TRUSDS03# show lic usage
    Feature                      Ins  Lic   Status Expiry Date Comments
                                     Count
    FCOE_NPV_PKG                  No    -   Unused             -
    FM_SERVER_PKG                 No    -   Unused             -
    ENTERPRISE_PKG                No    -   Unused             -
    FC_FEATURES_PKG               No    -   Unused             -
    VMFEX_FEATURE_PKG             No    -   Unused             -
    ENHANCED_LAYER2_PKG           Yes   -   Unused Never       -
    LAN_BASE_SERVICES_PKG         No    -   Unused             -
    LAN_ENTERPRISE_SERVICES_PKG   No    -   Unused             -

    I ended up getting the answer from TAC. First put in these two commands:
    test ethpm l3 enable-show-iport
    test port-channel l3 enable-show-ipc
    Then you will get some new port channels showing up (127 and 128).
    I'm not sure what 128 is for, but 127 is the internal port channel for the L3 card. Then you can view stats and poll with SNMP against the interface...
    show interface port-channel 127

  • Nexus 5548 L3 daughter card flapping

    Hi guys,
    Anyone of you here that experienced the logs below on their Nexus box:
    2011 Dec 12 06:24:45 GDCNXS5K01 %BTCM-2-BTCM_LOG_ROUTER_ERR: router card in slot 3 has internal link(s) flapped:     router ports down: 0x1a108000 0x1a109000 0x1a10a000 0x1a10b000 0x1a10c000 0x1a10d000 0x1a10e000 0x1a10f000
    I am getting this log at least once a day. Seems like it is shutting down the SVI of the box after the said log occured. Good thing I have enable vPC and I am able to access the NXS5K through the vCP keepalive link (mgmt).
    I have two Nexus 5548, but only one is experiencing the said error.
    Any inputs, suggestions would be greatly appreciated.
    Thanks,
    Edzel

    We had this same problem this past weekend, only in module 2 on a 5596.
    In our case, we had rebooted our primary Nexus and found the following message immediately preceeded the BTCM error you noted:
    %$ VDC-1 %$ %NOHMS-2-NOHMS_DIAG_ERROR: Module 2: Bootup diag detected major event: Forwarding ASIC failure: Ethernet2/9 Ethernet2/10 Ethernet2/11 Ethernet2/12 Ethernet2/13 Ethernet2/14 Ethernet2/15 Ethernet2/16
    We replaced the module.  A "show diag results module 3" would probably show you the same thing.  However, I don't think the error message will show up until you reboot.
    If your flapping Nexus is secondary, you probably won't notice anything major, but if it is your primary, it would probably affect your routing.

  • FCoE using Brocade cards CNA1020 and Cisco Nexus 5548 switches

    All,
    I have the following configuration and problem that I am not sure how to fix:
    I  have three Dell R910 servers with 1TB of memory and each has two  brocade 1020 CNA cards dual port.  I am using distributed switches for  the VM network and a second distributed switch for VMotion.  I have two  of the 10G ports configured in each distributed switch using IP Hash.   The management network is configured using a standard switch with two 1G  ports.
    The  Nexus configuration is we have two nexus 5548 switch connected together  with a trunk.  We have two VPC's configured to each ESX hosts  consisting of two 10gig ports in each VPC with one port going to each  switch.  The VPC is configured for static LAG.
    What  I am seeing is that after a few hours the virtual machines will not be  accessible via network anymore.  So if you ping the VM it will not work  and if you get on the console of the VM then ping the gateway then  nothing as well but if you try to ping another virtual machine on the  same host on the same VLAN then it will work so traffic is going through  the ESX backplane.  If I reboot the ESX host then things will work  again for another few hours or so then the problem repeats.
    The version of vSphere I am using is ESXi4.1
    Please assist I am stuck.
    Thanks...

    Here is the link for Nexus and Brocade interoperability Matrix
    http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/interoperability/matrix/Matrix7.html#wp313498
    usually this table would show those models those have been tested and verified
    However I do not see  Brocade 5300 listed in the table . It could be, interoperability may have not been tested by both vendors perticularly to 5300 type Model.

Maybe you are looking for