Urgent help - mac os 9.1 to 9.2

I'm trying to update from MAC OS 9.1 to MAC OS 9.2. (I have tried every link there was for mac os 9.2 update). They all work fine on the other computers (we have PowerMac G4's) The update starts then right when it gets towards the end it says that an unexpected error occured. This is getting frustrating. - I need to load mac 10.3.

Hi, mysticme -
There is no free version of DiskWarrior available. There is a free version of TechTool available, TechTool Lite, but it is intended for routine light-weight maintenance (rebuilding the Desktop, other items) support and does not include the serious repair capabilities of TechTool Pro, which is not free.
Either DiskWarrior or TechTool Pro will, in their current versions, also prove useful with OSX. Their capabilities have a little overlap, but each has different strengths.
For reference -
Alsoft's DiskWarrior
Micromat's TechTool Pro
It would be wise to obtain both if you can afford it; if you can get just one, I recommend DiskWarrior. Either will pay for itself the first time it rescues a machine.

Similar Messages

URGENT Help: Mac mini starts up, then just "died down" (power down...)

Hello all. This is my sis's Mac mini Intel.
Was actually booting from Leopard OS X thinking of an upgrade OS, ran Disk Utility and it reported some error cannot be repaired:
Invalid sibling link
Volume check failed
Error: Filesystem verify or repair failed
So I gave up the idea, quit the installer and restart, and press "Eject" to get the disc out.
*But now, it seems like when the Mac mini starts up, with the grey Apple logo and the spinning wheel, after a while, it just "stops", "fades away" and power off. Like a "sudden shut down" or "sudden sleep"*
So far I have *tried reset PRam* and also and SMU or something (plugging every cord out etc) but to no avail.
*HELP!! At least I want to be able to do a boot up to retrieve all the data before any hard re-format or something*
Thanks and cheers

It is possible, with the errors Disk Utility reported, that some (possibly even all) of the files on the drive will be damaged or inaccessible, so it is best to proceed with some caution.
There are several possibilities for recovering the files, all dependent on the situation. You could, for example, remove the hard drive from the mini, fit it in an external drive case and connect it to another system. That would, in my view, be the best option. Alternatively, you might be able to get the mini into firewire target disk mode (hold the T key down during bootup) and connected (via firewire) to another Mac, rescue files that way, or boot the system from an external drive which has a valid MacOS install for that system, and then rescue files from the internal drive.
You may find, if the drive's data structure is corrupt, that even if you can access the hard drive via any of the methods above, you'll need a utility such as Data Rescue II (http://www.prosofteng.com/products/data_rescue.php) to locate and retrieve what you need. You might also consider use of a utility such as DiskWarrior (http://www.alsoft.com/DiskWarrior/index.html) as a means to attempt a repair of the disk so that it can be returned to use - though this is by no means certain to succeed, and may not resolve potential data loss.

Urgent help, Mac won't boot! :(

Hi Folks,
Is anyone able to write a quick procedure for this?
http://www.davidglover.org/2009/09/t-mobile-usb-stick-120-zte-mf626-on-snow-leop ard.html
I've copied the file to a USB key and booted my Mac in to Single User Mode, other than this I am totally lost and need my Snow Leopard fixed for tomorrow
Thanks a lot in advance
M

If you don't know what you named it, then at the command line enter:
df
You will get some output like the following:
Filesystem 512-blocks Used Available Capacity Mounted on
/dev/disk1s3 325596176 19479216 305604960 6% /
devfs 236 236 0 100% /dev
/dev/disk4 976101312 203493712 772607600 21% /Volumes/OSX Backup
/dev/disk0s2 909901824 203141136 706760688 23% /Volumes/Macintosh HD
/dev/disk1s2 325585944 47518424 278067520 15% /Volumes/MacTest
/dev/disk1s4 324394936 13513192 310881744 5% /Volumes/Spare
/dev/disk0s3 66197496 19684552 46512944 30% /Volumes/Windows
You should be able to identify it from the results. You know the capacity of your flash drive and you may remember what you named it by looking in the last column.

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

Urgent Help! Flash Links not working on PC but fine on Mac??

I need urgent help as my client is expecting a fully working site this week and i can't seem to understand what the problem is with the site i created www.tuarard.ie. The links such as the link 'download current programme' which is on the splash page works fine on mac but not on pc. there are other various links throughout the the site as well which don't work on pc.
Could someone please help me fix this problem. i am guessing the flash in fine but that the html is causing the problems. i am a beginner in the world of html so i know very little about it.
any help would be greatly appreciated.
thanks,
Peter

I know this is hindsight, and likely more of an opinion-based answer, but except for the original dynamic "opening" of the flash homepage there wasn't anything I saw on the pages other than the scrolling photos at the top that required flash to accomplish. Flash is cool (I use it frequently for sections of a page - banner animations, etc.), but I've found it's often more trouble than it's worth unless every section of you site will feature something amazing or compelling to use it...
It's not search engine friendly (unless all of your text is linked externally, and even then limited), the correct player needs to be loaded on the viewer's machine to view, and it opens (generally) much slower than a standard html page...
Having said that - I think the site looks great - and fits the feel of the content, (and worked fine on the mac and windows browsers I tried here...)

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

Problem uninstalling MaxMSPRuntime on mac - urgent help needed

Hello there,
I've been using Cycle 74's MaxMSP Runtime version 5.1 for a while but recently had to witch to an earlier version to make some hardware function along side the Max runtime environment. The problem is that where i would usually just drag and drop Max 5.1 into the trash to uninstall it, for some reason, after i have done this and try to install the older version of Max, OSX wont let me install Max 4.0.8 as it says an updated version is currently installed. I have scoured my hard drive for the remanence of Max 5.1. and deleted everything i've found. Is there a way of overriding macosx and getting it to replace Max5.1 with an older version?
Urgent help needed as i am playing a show this weekend and currently am not able to get my equipment to function.
A shiny nickel for the one who saves my ***.
Thanks
Henry

Hi- Try this...
If you can, reinstall or use time machine to recover your recently deleted MaxMSP Runtime 5.1.
Then, download AppZapper. It is a utility that helps you cleanly delete programs off your mac. It is free for the first 5 uses.
http://appzapper.com/
Then, install AppZapper, and then go ahead and drag the MaxMSP Runtime 5.1 into it, and it should hopefully get rid of the pesky program

Need Urgent help, I have made partition hard drive in my mac book and using OS mac

Need Urgent help, I have made partition hard drive in my mac book and using OS mac & Window8 seperately... for couple of days it works great for both window & OS mac But nowadays, my pc gets restart automatically while using window & even I cant access to my Mac OS........... I got some error in window (error80070003) ...>>>>> Now how can I format whole drive & recover my Mac book OS.without boot disk.

I can't find that model. If you open System Profiler in the Utilities folder look for the Model Identifier over in the right hand display. What do you find for the model ID? If your computer supports Internet Recovery here's what to do:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. If Mavericks is not installed, then you can reinstall it by re-downloading the Mavericks installer.
You will need to use Boot Camp Assistant in order to create a new Windows partition, then reinstall Windows.

I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

Do you have a Time Machine backup or clone? If not,
all is lost if you have in fact deleted your OSX partition
and you will have to do a reinstall from Recovery HD
and install all else.

Urgent help needed to get this home page up!

Hi,
I need urgent help with this and it is driving me crazy. For
some reason my animation starts at its fastest and won't stop until
you click the area then it works properly. I have no clue why it is
doing this and only seems to do it on a PC browser not on a Mac.
Can anyone help please!!!!!
Link to sample:
http://www.totalamber.com/test.html
Link to fla:
http://www.totalamber.com/flash/homepage.fla
Thanks so much for anyone who can help or tries to help me.
Neil
Ps this is urgent and i can't find a solution by searching on
here

Thanks to anyone who has looked at this but i have found the
answer.
It is due to what many of the users on here will already know
and can be explained in this link:
http://blog.deconcept.com/swfobject/
I had forgot about the legal patent going on with microsoft!
Hope it helps anyone else as bad as i am.
Neil

Urgent help needed! How do I use Time Machine to restore my System disc?

I need urgent help. First I discovered that my Library folder was empty. When I tried to restore the library to an earlier version via Timemachine it would not let me because it said the system was in use. Trying to start-up from another system on another internal drive and using various disc repairs resulted in the whole volume to disappear.
Question is how do I get the earlier system from my Timemachine backup drive? I have another Mac where I can attach the TIme machine HD to. Can I restore it from there and then copy the files over to my corrupted disc? All my programs are on there as well, which would take me days to re-install and then there are the other bits, emails, photos etc. Can anyone help?

lightandmagic wrote:
Thanks for your sympathy Pondini and the encouragement. You just reminded me that I will lose a whole working day restoring !!! Do you happen to know where the emails are kept on the system and the address book? I better nick those as well as my other life sustaining bits before its too late. I don't trust anything any more.
I don't know what you mean by "nick those." Time Machine will put everything back the way it was at the time of the backup (unless you'd excluded things).
Do you mean you want to restore things from the period after the backup you selected?
For Address Book or Apple Mail, start the application, then +Enter Time Machine,+ navigate to your latest backup, and you'll have a prompt to restore. For Mail, you can restore an entire mailbox. When you exit from TM, you'll see a new folder in your Mail sidebar with the restored items, so you can sift through them and move, delete, or leave them as you wish.
Other items, you'll have to locate and restore via the Finder > Time Machine.

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

I moved from an old macbook to a new one. I copied all my files onto a hard drive. On trying to setup my mail, i went into documents, microsoft user identities, office 2011 and it shows the database but wont let me select it. Urgent help pls

I moved from an old macbook to a new one. I have installed Office for Mac 2011. I copied all my files from my old notebook onto a hard drive. On trying to setup my mail, i went into my hard drive and accessed microsoft user identities, office 2011 and it shows the database but wont let me select it. Its almost as if the file is there but not accessable. I desperately need to access my old mail. How do I do this? I am fairly confident that I copied all files off my old notebook. Is there a way for me to search for the Database file? Maybe I copied it to a different location? Urgent help please.

Hello mafrerichs and welcome to Apple Support Communities,
Simplest way is to use Target Disk mode:
How to use and troubleshoot FireWire target disk mode - Apple Support
and hook to another Mac and use CCC or SuperDuper and clone your HD to another drive.
You could also pull the drive out of your MBP and use an external USB case or SATA - USB dongle to hook it to another Mac.
"MacBook Pro (15-inch Late 2011),... have a 15" 2012 Macbook pro with 2gb of ram, i7 processor"
That's a little confusing?

Some urgent help needed with MobileMe suddenly saying my password is wrong

Hi
First of all I want to say sorry if this is in the wrong forum, but I needed some urgent help and I couldn't find a forum other than this that might relate to this issue.
The issue that I am having is with my MobileMe Account. I was on my Mac, when when my MobileMe Account suddenly dropped its connection and told me that I had entered the wrong username or password (I know I hadn't) I tried to re-enter them but every time I try I just get a message that says I have entered the wrong username or password. I no longer have access to my Mail, I can not sing-in to MobileMe to access my online account and it wont let me change the password because it keeps saying that safari can not open the page.
I can not sign-in to my MobileMe folders on my Mac and it wont sync. I was signed in perfectly fine before this happened so I know its nothing to-do with my password or user name.
I am now locked out of MobileMe and need some help as to what might have went wrong
Can someone please give me some quick help as this is really worrying me as I am afraid my MobileMe account might of been hacked (that is the kind of behaviour that I am seeing - saying that my username and password are wrong, when they are not, and not letting me sign in to change them)
Huge thanks

Ughhh,
it seems my panic was for nothing. I just ran apple 24 hour support and they put it right for me it cost me but I'd rather be safe and pay then loose all the information I have on MobileMe. This has taught me a lesson anyway, I need to keep a backup of everything and not just rely on time machine

Need to do a remote wipe of my iphone - stolen 24 hrs ago and . Need urgent help on this. Thanks - Pinaki

Need to do a remote wipe of my iphone - stolen 24 hrs ago Need urgent help on this. Thanks - Pinaki
< Personal Information Edited By Host >

Follow the steps in this article:
iCloud: Erase your device
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud), then click Find My iPhone.If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.If you don’t see Find My iPhone on iCloud.com, your account just has access to iCloud web-only features. To gain access to other iCloud features, set up iCloud on your iOS device or Mac.
Click All Devices, then select the device you want to erase.If you have Family Sharing set up, your family members’ devices appear below their names.
In the device’s Info window, click Erase [device].
To erase:
An iOS device: Enter your Apple ID password. If the device you’re erasing has iOS 7 or later, enter a phone number and message. The number and message will be displayed on the screen after the device is erased.

Urgent help - mac os 9.1 to 9.2

Similar Messages

Maybe you are looking for