URGENT HELP! my epson stylus sx105 stopped printing files, at all

I have a MacBook Pro 13" with Snow Leopard on, and my Epson Stylus SX105 always worked with it.
But now it's giving me this error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII faile
And does NOT let me print anything at all, besides print tests and stuff.
I tried to uninstall and re-intall the epson software (in the Software CD-ROM that came with the printer). Still nothing.
What do I do?

HI,
Try downloading and installing the 10.6.1 combo update.
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosxv1061update.htm l
Remember to repair disk permissions after the installation.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

  • Epson Stylus CX6600 stopped printing documents

    Can someone advise me on troubleshooting an Epson printer that has abruptly stopped printing!
    Background:
    We normally use it via the Airport USB port, but I also have the driver installed for plugging it directly into the iMac in case the Airport goes down.
    After printing from an application, the job appears in the print queue and immediately shows "Completed" status. This happens whether the printer is directly connected or is connected to the Airport.
    However --> When I send a test page (Printer | Print Test Page from the print queue), the test page appears in the queue and prints normally, whether directly connected or via Airport. Strange?
    I've tried printing from Microsoft Word, Textedit, and Microsoft Excel. The only change I can recall recently is replacing the black ink cartridge. Since then I've deleted and reinstalled the local print driver (a Gutenprint version - Epson provides no driver for this model).
    I don't have another working printer to swap out and try.
    James

    Problem resolved: I "Reset the Printing System"
    (http://support.apple.com/kb/HT1341?viewlocale=en_US)
    ...then downloaded and installed Epson's EasyPrint software
    (http://www.epson.com/cgi-bin/Store/support/supAdvice.jsp?noteoid=48205&type=high lights)
    ...then re-added the printer, which still used the Gutenprint driver v5.1.3.
    After all this, I was able to print again with the printer connected directly, then used AirPort Utility to add it as a wireless printer again, which now also works after adding the wireless printer to System Preferences.
    Long and short, I don't know if the EasyPrint software was the solution, or just the Reset Printing System action. Either way, now it works!
    James

  • Problem printing from cs6 photoshop to epson stylus pro 4800 printer

    Has anyone had trouble printing from cs6 on a mac running lion to a epson stylus pro 4800 printer?   I keep getting an error message saying  "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.""   The computer sees the printer just fine and has the latest driver installed. I have removed it and reinstalled it many times . I need help with this.

    Yes, the menu items are not unavailable. We were already aware of the "Reveal Arrow" issue under OSX v10.5.3. The most important print menu items such as "Print Settings" and "Color Management" are simply not present. As previously stated we've already tried uninstalling and reinstalling the latest (v3.66) "Universal" print driver on both hosts and all of our client Macs. A resolution to this problem is very urgent as our semester begins this week and currently students can not print their next week assignments.

  • Epson Stylus r360 issues printing in Leopard via Airport Extreme & Bonjour

    I hope I am not duplicating any posts, have searched but have not found a similar problem.
    I have an Epson Stylus Photo R360 printer connected to my Airport extreme via USB sharing the resource around the house via Bonjour to all my Mac's.
    Problem is it works fine under Tiger but the 2 Mac's that have been upgraded to Leopard 10.5 no longer print. It discovers the printer and loads in the printer configuration window ok, drivers are found and the printer looks good to go.
    However, when you try and print, after about a minute an error appears on the printer in Leopard with an exclamation mark and is unable to continue.
    If you hook up the printer directly to any Mac running leopard, it works fine!
    Anyone else having this problem? Is this something Apple has changed in Bonjour or maybe printer drivers problem via Bonjour?
    Any help or advice would be greatly appreciated.
    Thanks
    G

    I found a fix for the problem of not being able to print from a printer connected to an Airport Extreme.
    I had similar issues with my Canon iP4200, which was connected to an Airport Extreme. Printing worked fine with Tiger, but Leopard has somehow corrupted the feature. Printing is now very sporadic, at best - and will stop a few seconds into the printing and hang. My solution was to hook the printer directly up to the main (host computer). Go into System Preferences > Sharing, and make sure you've selected 'printer sharing'. Then go into the Sys Pref for "Printing/Fax", and remove your current printer (which was accessed via Bonjour on your Extreme) - you can leave it if you like, just make sure that when you add the new one, that you make it the default. Once set, make sure that you check the box labeled 'Share this Printer'. You will also now notice that the printer's location has changed to your host computer's name. You will now be able to print from your main computer without a hitch. Now access the System Pref>Printer/Fax from any other wired or wireless computer on your network. Add a new printer, a new choice will appear on your list, which will list the printer name with the "@" symbol, followed by your host computer's name. Select that, and let it do it's auto driver check, then click 'add'.
    You will now be able to print from any of your computer's on the network. Best of luck.

  • Photoshop CS6 on a Mac using an Epson Stylus PRO 3800 printer.

    Installed Photoshop CS6 on a Mac Version 10.9.4. Installed an Epson Stylus PRO 3800 printer. When I try to print through Photoshop the dialogue box won't give the option to color manage. I followed the link suggested in the print dialogue box but that was for CS5 and said it will only work with TIFF files. I work with .psd files. I downloaded it but my Mac will not let me open it. Any help would be most appreciated. Mary Ellen

    From Chris Cox: If you choose "Photoshop manages color", then Photoshop is managing the color and the printer driver is supposed to disable it's color controls (and let Photoshop manage the color).
    If Photoshop is managing the color, then there is nothing else for the printer driver to do - so it grays out it's own color controls because they don't apply while Photoshop is managing the color.

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • How to setup  wifi Epson stylus SX 435W printer and scanner on macbook pro with mavericks

    how to setup  wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
    please help

    mukhi23 wrote:
    how to setup  wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
    please help
    Read the user manual that came w/the printer/scanner, contact Epson to see if you need to update your scanner drivers to work in Mavericks also check Software Update.  Check out the following links: 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer

    cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer

    John Blanchard1
    Re: can't print to Epson TX610FW 
    Jul 28, 2012 10:23 AM (in response to normdrexel)
    Try installing the Epson drivers from here:
    http://support.apple.com/kb/DL1398
    and then seeing if adding and printing with USB works.
    This site really works and my computer is now printing.

  • Bought a new Mac Pro, purchased a Firewire to Thunderbolt adapter, then hooked up Epson Stylus Photo R2400 printer but the system preferences does not see the printer. Started, restarted, hit the " " to add a  printer but no go.

    How to connect via Firewire/Thunderbolt adapter an Epson Stylus Photo R2400 printer to a new Mac Pro

    When you switch from USB to FireWire, you have essentially installed a new (i.e., different) Printer.
    In the Add-a-Printer dialog, delete[-] the existing Printer queue which is set up for USB. Then, with the Printer connected via FireWire, Add [+] a new Printer queue and it should set it up correctly this time.
    To go back to USB, you would have to delete and re-add in a similar fashion later.

  • Difficulty installing Epson Stylus Photo PX720WD Printer.

    Difficulty installing Epson Stylus Photo PX720WD Printer.  The set-up disc says I need Rosetta.  Does anyone know what this is or how I get it? Thanks

    Welcome to Apple Support Communities
    Connect your printer, go to System Preferences > Print and Scan, press + and install the printer

  • Using Lightroom for Windows 8.1 with Epson Stylus Photo R3000 printer.

    Using Lightroom for Windows 8.1 with Epson Stylus Photo R3000 printer.  From PRINT section, if I click either "Page Setup" or "Printer" I get the Epson printer dialog box, drill down, change settings- so far so good.  When I'm finished with the settings and close the dialog box (hit OK) the print job starts immediately; I never get a chance to hit the Lightroom "Print" button.  Question: does this bypass any Lightroom processing or control of the print job?

    Even if I just click the Printer button to verify my settings I should then return to Lightroom, and then click Print to start the job.  This does not happen, the job starts as soon as I close the properties dialog box.  Again, is any Lightroom processing or control being bypassed because of this?

  • Epson Stylus TX210 stopped working after Epson Printer Drivers 2.1 update.

    Hi! I recently bought an Epson Stylus TX210 All-In-One printer. I installed the drivers and software bundled in the included CD and I used it without any problems for 2 days, until the I was prompted to download Epson Printer Drivers 2.1. After the installation, I noticed that whenever I wanted to print anything, the "Print" blue glowing button in the print dialogue won't do anything and no matter how many times I pressed it, it didn't continue the printing process. I've tried everything to solve the issue, but so far anything has worked properly.
    Thing I've done:
    -Trashed the EPSON folder in HD\Library\Printers
    -Repaired permissions.
    -Reset printing system.
    -Reinstall the CD drivers.
    -Redownload the Epson Printer Drivers 2.1.
    -Delete bundled software.
    I've tried every possible combination of the steps above, and so far here's the state of my printed:
    -I can print a Test Page directly using Option and Supplies opftion under the Printer and Fax settings.
    -Scanner works.
    -The "Print" button is no longer stuck, but every attempt to print fails. The printing status reads: "Error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents/MacOS /rastertoescpll failed"
    -I'm printing by connecting the printer directly through the USB port.
    Is there anything I can do? I would gladly appreciate any help!
    Thanks in advance!

    I would like to inform everyone that I've successfully solved my problem and now my printer works again!
    The actual solution this this problem is a combination of various tips on this thread, but finally I found the exact steps and files needed.
    1-If you installed drivers from the CD included in the printer, first uninstall them by opening each individual installer on the /Commons/ folder on the CD. After the installer prompts you for the password, select the "uninstall" option on the drop-down menu on the top left section of the window. Make sure you run the uninstall option -if possible- on all installers included on the CD.
    2-Trash the HD\Library\Printers\EPSON folder and empty the Trash Can. There's going to be a couple of files being in use and you won't be able to delete them -yet-.
    3-Reboot and disconnect your printer.
    4-Empty the Trash Can again. The remaining files should be gone by now.
    5-Go to System Preferences/Printer and Fax, right-click on the printer list and reset the printing system.
    6-Go to http://www.epson.com.ph/epson/drivers/driver_download.htm?dc=1&mode=3&m=false&ca tid=4&pid=1473 and download the Epson Stylus TX210 Driver for Mac OS X. -Note: I tried multiple versions of the TX210 drivers found online and this particular version was the only one that worked. It's interesting that the this for both the SX210 and TX210, and the installers that only contained the TX210 drivers didn't work-. If for some reason the page changes, the name of the file you're looking for is SX210Series652EMP2.dmg
    7-Run the installer.
    8-Connect your printer and go to System Preferences/Printer and Fax. The printer should be recognized and ready to print.
    Thanks everybody for all the support!

  • Using iMac, Aperture 3, and & Epson Stylus Photo R1800 printer: How come my prints look like trash?

    I have calibrated my iMac Intel Core i3 and printing through Aperture 3 with an Epson Stylus Photo R1800 is not producing great results. Cyan is dominating along with blue lines through the grass in the picture. I figure the lines are a result of clogged head...but the fact the prints are not close to the image on the screen is alarming. HELP!!!

    SFSteinie,
    There is an Aperture forum, I'd recommend reposting there and perhaps another R I 1800 users has some insight you may not know about.

  • Epson Stylus Photo 820 print workaround for OS 10.3.9?

    Howdy!
    I have an Epson Stylus Photo 820 that I'm using under OS 10.3.9- that I can't seem to (directly) print to out of in most applications. It works fine in Safari and Entourage and Quark; but out of Photoshop, Illustrator; InDesign, Word, etc., there's no print option. I have to click Preview first and then am able to print. It doesn't work at all with Adobe Acrobat Pro 7 and one or two other apps. The driver I have installed is version 1.1.0 (I didn't see any updated drivers on the Epson page). The Print Manager sees it in the queue. It's checked and set as the default printer. Yet, I still have the headache.
    Anyone else having similar problems? Is there a workaround?
    Also- I kind of miss my printing options of my (long gone and MUCH better quality) Epson 740 under OS 9 where I could set the print quality level of the print out. Is there a similar option for the 820 under OS 10.3.9?
    Thanks in advance for any help!
    G4 Dual Boot, MDD, Dual 1.25   Mac OS X (10.3.9)  

    Thanks, but the one driver that may have worked (though it states for OS's 10.1.3-10.2.6... there is no 10.3.9 version) has a dead link.
    link
    This is really frustrating that Epson will take your money and not support their product. No wonder they have a huge class action suit against them.

Maybe you are looking for