Urgent Help Needed in this Report

hi frd. help me in this report.
parameter : plant,material no,company code,storage location.
display: material no, material desc, UOM, ROL, warehouse, open po, open po qty, open pr no, open pr qty.
Kindly Give me tips for doing this report.
thank u
Pari Vendhan.R

Hi Pari,
Go to se38 --Abap editior..
chose the includes u like to be as
Include <>_top.
Include <>_subr.
then follow the events....
Initialization.
( as per requirement).
At selection-screen.
Perform fetch _data.
Perform fefilloutput.
any other logic to be followed for u r report.
end-of-selection.
Perform output.
In include top.
Put the declarartion part and the selection-screen block.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : pa_werks LIKE table name-werks
pa_material no like tablename-field.
SELECTION-SCREEN END OF BLOCK b1.
like wise u need to put the logic for the requirement
Thanks
Mohinder Singh Chauhan

Similar Messages

Urgent Help Needed in scheduling reports from BI Publisher

Hi,
I have configure the scheduler service on my windows server. Now i am trying to schedule a report from BI pubisher. But it is not working. When i click submit button, It is not doing anything. It seems it adds entry in the job schedule table. Even when i click schedules link, it shows just show progress status on explorer status bar but nothing happens.
Any help would be on this would be highly appretiated.
Thanks,
Prasad

Have you actually checked the scheduler tab to see what the report did? BI Publisher will not just tell you if a job fails unless you have your email server configured then you tell it to email you if the job fails. Also, be patient because it can take up to 5 or 10 minutes for a report to completely run for a 40000 row dataset. If you check the scheduler tab and the job failed, check your RTF Template. I have discovered through trial and error that BIP is picky about how you do your tags, especially loop tags. These would allow you to view the report online but cause BIP scheduled reports to fail on the report. Other than that, have you installed the scheduler database and tied it in? BIP has its own database schema you have to install somewhere on an database server that it stores scheduling information in.
I hope this helps.

URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.

In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

Urgent help needed; Database shutdown issues.

Urgent help needed; Database shutdown issues.
Hi all,
I am trying to shutdown my SAP database and am facing the issues below, can someone please suggest how I can go about resolving this issue and restart the database?
SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01089: immediate shutdown in progress - no operations are permitted
SQL> shutdown abort
ORA-01031: insufficient privileges
Thanks and regards,
Iqbal

Hi,
check SAP Note 700548 - FAQ: Oracle authorizations
also check Note 834917 - Oracle Database 10g: New database role SAPCONN
regards,
kaushal

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

Error Message: Information is needed before this report can be processed.

Hi Experts,
I am scheduling a Crystal Report from Infoview. Data Source for Report is BEx Query.
While scheduling i am providing all details like Parameters, Formats, Destination etc.
But Schedule is failing. The reason is parameter field is empty when i checked
in failed status , as below.
Parameters: [No Value]; [No Value]
Error Message: Information is needed before this report can be processed.
But when i am viewing the report with the same parameters, it is executing.
Please help
Regards,
Ajay Singh
Edited by: Ajay Singh on Sep 15, 2009 1:05 PM

Hi,
Try the below mentioned steps in addition to scheduling of your report.
Method 1: Following information might be helpful in resolving the issue.
To check if the .rep file exists in the Output FRS
1.Log on to the Central Management Console (CMC). Click Objects.
2.Click the report object to view its properties.
3.Click the History tab to view the list of instances.
4.Click Success to view the latest instance. Scroll to Instance Location.
5.Note the path name to the report.
6.Check the file store under the Output directory for the report.
If the report does not exist, delete the instance from the History tab in the CMC. Reschedule the report.
Method 2: To verify the configuration of multiple FRS
1.Log on to the CMC.
2.Click Servers.
3.Click the first Input file server. Note the home directory.
4.Click Home > Servers.
5.Click the second Input file server.
6.Check the home directory path for the second Input FRS. It must point to the same directory as the first Input FRS.
7.Repeat steps 2 through 6 to check the Output FRS.
====================
NOTE:
The Input and Output FRS physical machines must be able to connect to the file share for the file store. Also the Input and Output FRS are installed using the local administrator account. That account may not have rights to the network share for the file store. The security on the file store must be changed so the local administrator for each server can access it.
====================
Above mentioned steps are for deski/webi reports.
Cheers,
Suresh ALuri.

IPhone 3G 8GB Crashes when syncing with iTunes. URGENT HELP NEEDED.

I have latest iTunes and OS on my iPhone 3G...
Every time i plug my iPhone in it begins to sync and then iTunes will freeze and not respond..
I have tried re installing iTunes.. I can't reset my iPhone as i can't create a backup..
URGENT HELP NEEDED PLEASE!

I don't have an iphone, but if it's anything like my click-wheel ipod, a reset doesn't delete anything.
It just resets the ipod's operating system, kind of like a PC restart. Did you try this Sleep/Wake button thing mentioned here?
http://support.apple.com/kb/HT1737
Maybe it's a podcast of voice memo causing the problem like it did for this person
http://discussions.apple.com/message.jspa?messageID=10907809#10907809
That's all I got. You might have better luck on an iPhone forum. Everyone there would probably have one. Like I said, I don't.

IPhone 4 reset itself, photos lost -URGENT HELP NEEDED

Hi there,
Urgent help needed!!
Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
Thanks in advance!!!!

Slymm71 wrote:
just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
See your other post...
https://discussions.apple.com/message/18876037#18876037

Computer restarts when ipod is connected urgent help needed

alright this is weird, I've had my ipod for ages and suddenly I go to plug it in and the computer slows down really really really slow and eventually just turns it self off, restarts and then sits in a black screen. if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen, but both my ipod and computer work fine when there not connected. i have the latest version of itunes which seemed to help the first time i tried it actually started to update the ipod but then guess what the computer has another heart attack. urgent help needed please!!!

if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen
Given this, I'd put it down to a flaky power supply in the computer. Might want to try using another computer or replacing the PSU.

User Exit for Material Group...Urgent help needed

Does anybody have an idea of which user exit can be used to capture the changes made to material group in MM02(Material)..... Urgent help needed...

See the below user exit and this will trigger under MM01,MM02 and MM17 Transaction
Enhancement name : MGA00001
Function module :EXIT_SAPLMGMU_001
Include : ZXMG0U02
Reward Points if it is helpful.
Thanks
Seshu

Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Garg

rohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.

Problem uninstalling MaxMSPRuntime on mac - urgent help needed

Hello there,
I've been using Cycle 74's MaxMSP Runtime version 5.1 for a while but recently had to witch to an earlier version to make some hardware function along side the Max runtime environment. The problem is that where i would usually just drag and drop Max 5.1 into the trash to uninstall it, for some reason, after i have done this and try to install the older version of Max, OSX wont let me install Max 4.0.8 as it says an updated version is currently installed. I have scoured my hard drive for the remanence of Max 5.1. and deleted everything i've found. Is there a way of overriding macosx and getting it to replace Max5.1 with an older version?
Urgent help needed as i am playing a show this weekend and currently am not able to get my equipment to function.
A shiny nickel for the one who saves my ***.
Thanks
Henry

Hi- Try this...
If you can, reinstall or use time machine to recover your recently deleted MaxMSP Runtime 5.1.
Then, download AppZapper. It is a utility that helps you cleanly delete programs off your mac. It is free for the first 5 uses.
http://appzapper.com/
Then, install AppZapper, and then go ahead and drag the MaxMSP Runtime 5.1 into it, and it should hopefully get rid of the pesky program

Urgent help needed, can I restore N900 Backup file...

i owned a N900 (now sold out)
before selling i took backup of contacts from backup restore option in application section
now i bought a N8 but i m not able to restore my contacts
1. is there any way to restore them in N8?
2. if not, can i convert them in TEXT or any readable format
urgent help needed
thanks in advance

The backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8.

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

Urgent Help Needed in this Report

Similar Messages

Maybe you are looking for