Urgent help needed in Using German Umlauts for Table names

I created a table with Umlauts But i am not able to select from
this table.I am also not able to drop this table as i get
invalid character error.What setting has to be set.The NLS is I
believe GERMAN_GERMANY.WE8ISO8859P1

Pl do not post duplicate threads - insert dont work in Workflow
Srini

Similar Messages

Urgent help needed to build a script for like mapping

ll
Edited by: Tom&amp;amp;Mah on Jul 17, 2012 7:13 AM

Hello,
I don't have a VI for you, but I'll try to give you some ideas.
Of course, first you will need to use DAQ VIs to acquire the data. You will probably have a loop with one scan process per loop iteration. In that case, just put a chart inside the loop and the new data will be added to the chart. The data will be plotted starting at the last scanned x-axis point, and the plot line will continue from the previous y point. If the new scan doesn't start until the user presses a button on the front panel, then you should use event driven programming. I have included a simple example that will plot new data after the user hits a Boolean. The new data is added to the chart.
You might want to search on google for LabVIEW and xps to see if someone else ha
s implemented some VI to use with xps.
Zvezdana S.
Attachments:
Chart.vi ‏28 KB

Using a Variable for Table Name with a cursor

Hello All
Is it possible to use a Parameter passed to a procedure as the table name
in a cursor selection statment. I thought the below would work but I get
a error. Does anyone have any ideas?? The Error is listed below to.
Here's the code I just complied
CREATE OR REPLACE PROCEDURE Dup_Add(NEWQATABLE IN VARCHAR2) IS
CURSOR c1 IS SELECT MUNI,PROV FROM NEWQATABLE GROUP BY MUNI, PROV;
c1rec c1%ROWTYPE;
BEGIN
OPEN c1;
LOOP
FETCH c1 INTO c1rec;
EXIT WHEN c1%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(c1rec.MUNI);
END LOOP;
CLOSE c1;
END;
Here is the errors
LINE/COL ERROR
3/8 PLS-00341: declaration of cursor 'C1' is incomplete or malformed
3/15 PL/SQL: SQL Statement ignored
3/38 PLS-00201: identifier 'NEWQATABLE' must be declared
5/7 PL/SQL: Item ignored
10/3 PL/SQL: SQL Statement ignored
10/17 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
12/3 PL/SQL: Statement ignored
12/24 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
LINE/COL ERROR
Thanks
Peter

If you are going to have a table name or a column name as a parameter, then you have to open the cursor dynamically. The following example uses Native Dynamic SQL (NDS) to open a ref cursor dynamically. I also eliminated the group by clause, since it is intended for use with aggregate functions and you weren't using an aggregate function. Also notice that there are some other differences in terms of defining variables and fetching and so forth.
SQL> CREATE TABLE test_table
2 AS
3 SELECT deptno AS muni,
4         dname AS prov
5 FROM   dept
6 /
Table created.
SQL> CREATE OR REPLACE PROCEDURE Dup_Add
2    (newqatable IN VARCHAR2)
3 IS
4    TYPE cursor_type IS REF CURSOR;
5    c1 cursor_type;
6    c1muni NUMBER;
7    c1prov VARCHAR2 (20);
8 BEGIN
9    OPEN c1 FOR 'SELECT muni, prov FROM ' || newqatable;
10    LOOP
11      FETCH c1 INTO c1muni, c1prov;
12      EXIT WHEN c1%NOTFOUND;
13      DBMS_OUTPUT.PUT_LINE (c1muni || ' ' || c1prov);
14    END LOOP;
15    CLOSE c1;
16 END;
17 /
Procedure created.
SQL> SHOW ERRORS
No errors.
SQL> SET SERVEROUTPUT ON
SQL> EXECUTE dup_add ('test_table')
10 ACCOUNTING
20 RESEARCH
30 SALES
40 OPERATIONS
PL/SQL procedure successfully completed.

Urgent help needed with iPhoto/pdf preview for book order - mysterious pixelated areas show on PDF but not in iPhoto

Hello. I ordered an iPhoto book last week to give to my parents for their 50th wedding anniversary. Tonight, I just checked on the order status and found that my book is cancelled. I received no notification about it, and all I could do was fill out the online form, so customer service will get back to me on Monday via email (if I'm lucky...). There is no telephone number for me to call about this. I decided I'd best do some searching to try to figure out what had happened.
I had thought that the preview I saw in iPhoto was the preview of the book. I found out I was wrong. So I created a PDF preview of the book and found some craziness that I don't understand. In iPhoto (and any other program, i.e. PhotoShop), my photos are fine. They are mostly TIFF format and high resolution with a few high res JPEGs. However, when I view the PDF, there is a band of black and white pixelation about 1/2-inch across the bottom of some pages - not all. The photos in that area are messed up in that band zone. The other photos are totally unaffected. This affects both TIFF and JPEG photos, and both black and white and color.
Has anyone else had this problem, and what was your solution? I would be extremely grateful to anyone for advice or information about this! The anniversary party is less than a week away and I'm beyond my limit of stress right now...

Launch iPhoto with the Option key held down and create a new library. Import enough photos for a book (use some of those in the current book) create a new book and preview as a PDF. If you don't see the problem then it's limited to your library which may be damaged. If that's the case make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
Select the options identified in the screenshot and the option to rebuild the small thumbnails.
Click to view full size
If you get the same problem in the test library then log into another user account on your Mac, create a test library and try it there. If the problem shows up there a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
If you don't encounter the problem in the other user account then it's something in your account that's the culprit. Post back with the results.
OT

Urgent : Help needed in Using Hyperion to create a custom reports

Hi Gurus,
I am new to Bw my requirement is to use Hyperion to create a custom reports based on the functional specification. this report should be Created based on the data in the BW. I mean the data should come from BW.
Can any one give a detailed description about how to create these reports. If you have any documents on what is hyperion and the integration of hyperion to BW can you please forward them to [email protected]
Thank You,
Reddy.

Not sure, But ultimately 'Flat file' may be the common interface for both the environments. So i think BW role may stop after crating the flat file in a specific format..
regards,
Hari

Can substitution strings be used for table name references?

Hi,
I was wondering if it's possible to use substituion strings for table names in SQL queries. This would allow for me to edit all references to a table at one location. For instance, if a table name or dblink changed, I could edit the substitution string or application item to ensure all the queries reference the new table.
For example:
select * from &table1.
table1 would be the substitution string for the actual table name
I know this is possible if I used a pl/sql function returning a query, but I would much rather use a substition string in a SQL query.
Thanks in advance.
Brian

i think not
because how create the fields of * in this case
in the other because all is dynamic, i think that you obtain only an error

Urgent help needed for XML Tags using XMLForest()

Folks
I need some urgent help regarding getting use defined tag in your
XML output.
For this I am using XMLElement and XMLForest which seems to work fine
when used at the SQL prompt but when used in a procedure throws and error
SQL> Select SYS_XMLAGG(XMLElement("SDI",
                                   XMLForest(sdi_num)))
     From sdi
     where sdi_num = 22261;- WORKS FINE
But when used in a procedure,doesnt seem to work
Declare
    queryCtx DBMS_XMLQuery.ctxType;
    v_xml     VARCHAR2(32767);
    v_xmlClob CLOB;
    BEGIN
    v_xml:='Select SYS_XMLAGG(XMLElement("SDI",
                                         XMLFOREST(sdi_num)))
    From sdi
    where sdi_num = 22261';
    queryCtx :=DBMS_XMLQuery.newContext(v_xml);
    v_xmlClob :=DBMS_XMLQuery.getXML(queryCtx);
    display_xml(v_xmlClob);
End;
CREATE OR REPLACE PROCEDURE display_xml(result IN OUT NOCOPY CLOB)
AS
     xmlstr varchar2(32767);
     line varchar2(2000);
BEGIN
     xmlstr:=dbms_lob.SUBSTR(result,32767);
     LOOP
     EXIT WHEN xmlstr is null;
     line :=substr(xmlstr,1,instr(xmlstr,chr(10))-1);
     dbms_output.put_line('.'||line);
     xmlstr := substr(xmlstr,instr(xmlstr,chr(10))+1);
     END LOOP;
end;
SQL> /
.<?xml version = '1.0'?>
.<ERROR>oracle.xml.sql.OracleXMLSQLException: Character ')' is not allowed in an
XML tag name.</ERROR>
PL/SQL procedure successfully completed.
SQL>HELP is appreciated as to where I am going wrong?

Hi,
if you want to transform something to something else, you should declare, what is your source.
I would prefer to use plain XSL-Transformations, because you have a lot more options to transform your source and you can even better determine, how your output should looks like.
Kind regards,
Hendrik

User Exit for Material Group...Urgent help needed

Does anybody have an idea of which user exit can be used to capture the changes made to material group in MM02(Material)..... Urgent help needed...

See the below user exit and this will trigger under MM01,MM02 and MM17 Transaction
Enhancement name : MGA00001
Function module :EXIT_SAPLMGMU_001
Include : ZXMG0U02
Reward Points if it is helpful.
Thanks
Seshu

I have a new mac book pro which i use in england but I need to use German charachters frequently, is there a way of having both visable on the keyboard?

I have a new mac book pro which i use in england but I need to use German charachters frequently, is there a way of having both visable on the keyboard?
For example so that I can just press shift or another key to get the German character.

Some may already exist, but you will have to learn them. On my old system these can be found through keyviewer.app For example, if I press option+s I get ß Umlaut is a bit cumbersome as option+u then the actual letter. It may be possible to bind a key to do this function, possibly through System Preferences > Keyboard > Shortcuts
I have old, old references for utilities that let you rebind keys to other functions, and you would have to see if they have modern equivalents.
Ukelele Mac OS X Keyboard Layout Editor - http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele - mostly useful for character, not function mapping.
Check Butler, ikeys, quickeys or Spark

URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.

In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

Urgent help needed, can I restore N900 Backup file...

i owned a N900 (now sold out)
before selling i took backup of contacts from backup restore option in application section
now i bought a N8 but i m not able to restore my contacts
1. is there any way to restore them in N8?
2. if not, can i convert them in TEXT or any readable format
urgent help needed
thanks in advance

The backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8.

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

IPhone 4 reset itself, photos lost -URGENT HELP NEEDED

Hi there,
Urgent help needed!!
Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
Thanks in advance!!!!

Slymm71 wrote:
just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
See your other post...
https://discussions.apple.com/message/18876037#18876037

Computer restarts when ipod is connected urgent help needed

alright this is weird, I've had my ipod for ages and suddenly I go to plug it in and the computer slows down really really really slow and eventually just turns it self off, restarts and then sits in a black screen. if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen, but both my ipod and computer work fine when there not connected. i have the latest version of itunes which seemed to help the first time i tried it actually started to update the ipod but then guess what the computer has another heart attack. urgent help needed please!!!

if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen
Given this, I'd put it down to a flaky power supply in the computer. Might want to try using another computer or replacing the PSU.

Urgent help needed in Using German Umlauts for Table names

Similar Messages

Maybe you are looking for