Urgent : Help needed in Using Hyperion to create a custom reports

Hi Gurus,
         I am new to Bw my requirement is to use Hyperion to create a custom reports based on the functional specification. this report should be Created based on the data in the BW. I mean the data should come from BW.
Can any one give a detailed description about how to create these reports. If you have any documents on what is hyperion and the integration of hyperion to BW can you please forward them to [email protected]
Thank You,
Reddy.

Not sure, But ultimately 'Flat file' may be the common interface for both the environments. So i think BW role may stop after crating the flat file in a specific format..
regards,
Hari

Similar Messages

  • URGENT HELP NEEDED - Is it possible to create an I-V Characteristic Chart (Photovoltaic) using version 8.2

    We are students trying to replicate the output of a photovoltaic cell. We have developed our LabView software to read
    both current and voltage across a load but we are not sure how to chart both these real time values. We have found a
    NI link  http://zone.ni.com/devzone/cda/tut/p/id/7230  which would be perfect but we only have access to LabView version 8.2.
    Any help on trying to achieve similar charts using 8.2 would exetremely appreciated. 

    Sorry, you should be a bit more specific. What do you mean by "use"? Can you give an example?
    If you want to call the subVI with the dial position as a parameter, just make a connector for it.
    If you want to read the dial position from within the subVI, make a connector for a reference to the control and read the value in the subVI via a value property.
    LabVIEW Champion . Do more with less code and in less time .

  • Urgent help needed in Using German Umlauts for Table names

    I created a table with Umlauts But i am not able to select from
    this table.I am also not able to drop this table as i get
    invalid character error.What setting has to be set.The NLS is I
    believe GERMAN_GERMANY.WE8ISO8859P1

    Pl do not post duplicate threads - insert dont work in Workflow
    Srini

  • Urgent help needed for XML Tags using XMLForest()

    Folks
    I need some urgent help regarding getting use defined tag in your
    XML output.
    For this I am using XMLElement and XMLForest which seems to work fine
    when used at the SQL prompt but when used in a procedure throws and error
    SQL> Select SYS_XMLAGG(XMLElement("SDI",
                                       XMLForest(sdi_num)))
         From sdi
         where sdi_num = 22261;- WORKS FINE
    But when used in a procedure,doesnt seem to work
    Declare
        queryCtx  DBMS_XMLQuery.ctxType;
        v_xml     VARCHAR2(32767);
        v_xmlClob CLOB;
        BEGIN
        v_xml:='Select SYS_XMLAGG(XMLElement("SDI",
                                             XMLFOREST(sdi_num)))
        From sdi
        where sdi_num = 22261';
        queryCtx :=DBMS_XMLQuery.newContext(v_xml);
        v_xmlClob :=DBMS_XMLQuery.getXML(queryCtx);
        display_xml(v_xmlClob);
    End;
    CREATE OR REPLACE PROCEDURE  display_xml(result IN OUT NOCOPY CLOB)
    AS
         xmlstr varchar2(32767);
         line varchar2(2000);
    BEGIN
         xmlstr:=dbms_lob.SUBSTR(result,32767);
         LOOP
         EXIT WHEN xmlstr is null;
         line :=substr(xmlstr,1,instr(xmlstr,chr(10))-1);
         dbms_output.put_line('.'||line);
         xmlstr := substr(xmlstr,instr(xmlstr,chr(10))+1);
         END LOOP;
    end;
    SQL> /
    .<?xml version = '1.0'?>
    .<ERROR>oracle.xml.sql.OracleXMLSQLException: Character ')' is not allowed in an
    XML tag name.</ERROR>
    PL/SQL procedure successfully completed.
    SQL>HELP is appreciated as to where I am going wrong?

    Hi,
    if you want to transform something to something else, you should declare, what is your source.
    I would prefer to use plain XSL-Transformations, because you have a lot more options to transform your source and you can even better determine, how your output should looks like.
    Kind regards,
    Hendrik

  • URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

    I have tried the Security Realm of Tomcat. Since I do not have
    an LDAP server, I decided to use the Tomcat-users.xml file in
    Tomcat\conf directory.
    I added the following lines of code in the web.xml file.
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>Entire Application</web-resource-name>
    <url-pattern>/*</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <!-- NOTE: This role is not present in the default users file -->
    <role-name>webviewer</role-name>
    </auth-constraint>
    </security-constraint>
    <login-config>
    <auth-method>BASIC</auth-method>
    <realm-name>Tomcat Manager Application</realm-name>
    </login-config>
    The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
    <tomcat-users>
    <user name="test" password="password" roles="webviewer" />
    </tomcat-users>
    So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
    But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
    Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
    URGENT HELP NEEDED ... I need to get back to my client on this.
    Help would be v. much appreciated.

    In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
    Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
    Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

  • URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

    My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
    I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
    I've tried switching to another USB port of my MacBook. No luck.
    My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
    I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
    Urgent help needed & appreciated. Millions of thanks in advance.
    Gary

    1. I used both cables - theirs & mine ... and on several macs
    2. yes, same cable for wall & mac
    3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
    anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

  • Urgent help needed, can I restore N900 Backup file...

    i owned a N900 (now sold out)
    before selling i took backup of contacts from backup restore option in application section
    now i bought a N8 but i m not able to restore my contacts
    1. is there any way to restore them in N8?
    2. if not, can i convert them in TEXT or any readable format
    urgent help needed
    thanks in advance

    The backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
    You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8.

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

  • IPhone 3G 8GB Crashes when syncing with iTunes. URGENT HELP NEEDED.

    I have latest iTunes and OS on my iPhone 3G...
    Every time i plug my iPhone in it begins to sync and then iTunes will freeze and not respond..
    I have tried re installing iTunes.. I can't reset my iPhone as i can't create a backup..
    URGENT HELP NEEDED PLEASE!

    I don't have an iphone, but if it's anything like my click-wheel ipod, a reset doesn't delete anything.
    It just resets the ipod's operating system, kind of like a PC restart. Did you try this Sleep/Wake button thing mentioned here?
    http://support.apple.com/kb/HT1737
    Maybe it's a podcast of voice memo causing the problem like it did for this person
    http://discussions.apple.com/message.jspa?messageID=10907809#10907809
    That's all I got. You might have better luck on an iPhone forum. Everyone there would probably have one. Like I said, I don't.

  • IPhone 4 reset itself, photos lost -URGENT HELP NEEDED

    Hi there,
    Urgent help needed!!
    Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
    Thanks in advance!!!!

    Slymm71 wrote:
    just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
    See your other post... 
    https://discussions.apple.com/message/18876037#18876037

  • Computer restarts when ipod is connected urgent help needed

    alright this is weird, I've had my ipod for ages and suddenly I go to plug it in and the computer slows down really really really slow and eventually just turns it self off, restarts and then sits in a black screen. if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen, but both my ipod and computer work fine when there not connected. i have the latest version of itunes which seemed to help the first time i tried it actually started to update the ipod but then guess what the computer has another heart attack. urgent help needed please!!!

    if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen
    Given this, I'd put it down to a flaky power supply in the computer. Might want to try using another computer or replacing the PSU.

  • User Exit for Material Group...Urgent help needed

    Does anybody have an idea of which user exit can be used to capture the changes made to material group in MM02(Material)..... Urgent help needed...

    See  the below user exit and this will trigger under MM01,MM02 and MM17 Transaction
    Enhancement name : MGA00001
    Function module :EXIT_SAPLMGMU_001
    Include : ZXMG0U02
    Reward Points if it is helpful.
    Thanks
    Seshu

  • Problem uninstalling MaxMSPRuntime on mac - urgent help needed

    Hello there,
    I've been using Cycle 74's MaxMSP Runtime version 5.1 for a while but recently had to witch to an earlier version to make some hardware function along side the Max runtime environment. The problem is that where i would usually just drag and drop Max 5.1 into the trash to uninstall it, for some reason, after i have done this and try to install the older version of Max, OSX wont let me install Max 4.0.8 as it says an updated version is currently installed. I have scoured my hard drive for the remanence of Max 5.1. and deleted everything i've found. Is there a way of overriding macosx and getting it to replace Max5.1 with an older version?
    Urgent help needed as i am playing a show this weekend and currently am not able to get my equipment to function.
    A shiny nickel for the one who saves my ***.
    Thanks
    Henry

    Hi- Try this...
    If you can, reinstall or use time machine to recover your recently deleted MaxMSP Runtime 5.1.
    Then, download AppZapper. It is a utility that helps you cleanly delete programs off your mac. It is free for the first 5 uses.
    http://appzapper.com/
    Then, install AppZapper, and then go ahead and drag the MaxMSP Runtime 5.1 into it, and it should hopefully get rid of the pesky program

  • Recovering windows XP -Urgent help needed

    I am new to Toshiba. I hav a 60 GB hard disk with no partition and windows XP home installed. I want to partition the hard disk now. Now after formatting the hard disk do i lose Windows XP HE completely or is there chance to recover it and reinstall it. Urgent help needed.

    Hi
    You can reinstall your notebook using Recovery CD. It is easiest and fastest way to reinstall OS, all necessary drivers and tools. Put Recovery CD into DVD-ROM, start notebook and press down C button. At the beginning there is choice between two kinds of installation (Standard mode and expert mode).
    If you choose the first one whole HDD will be formatted and used for OS installation. With second one (expert mode) it is possible to install OS on first partition. It is also possible to define how big the partition should be.
    Try it. It is very simple to do it.
    Good luck

  • Urgent help needed; Database shutdown issues.

    Urgent help needed; Database shutdown issues.
    Hi all,
    I am trying to shutdown my SAP database and am facing the issues below, can someone please suggest how I can go about resolving this issue and restart the database?
    SQL> shutdown immediate
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-01089: immediate shutdown in progress - no operations are permitted
    SQL> shutdown abort
    ORA-01031: insufficient privileges
    Thanks and regards,
    Iqbal

    Hi,
    check SAP Note 700548 - FAQ: Oracle authorizations
    also check Note 834917 - Oracle Database 10g: New database role SAPCONN
    regards,
    kaushal

Maybe you are looking for