Urgent Help needed- Not able to schedule reports in BI Publisher

Hi,
I have configure the scheduler service on my windows server. Now i am trying to schedule a report from BI pubisher. But it is not working. When i click submit button, It is not doing anything. It seems it adds entry in the job schedule table. Even when i click schedules link, it shows just show progress status on explorer status bar but nothing happens.
Any help would be on this would be highly appretiated.
Thanks,
Prasad

Hi Prasad,
Are you still having the problem? Which version of BI Publisher are you running? If you are running an earlier version, then upgrade it to 10.1.3.3.3 and the problem gets solved. We also had the same problem when we were on 10.1.3.3.0 and now it's gone after we upgraded. Hope this helps.
-MS

Similar Messages

Not able to schedule reports

Hi,
I am trying to schedule a report from BI publisher. But when i click submit i doesnot go ahead. It adds entry in XMLP_SCHED_JOBS table. But nothing happens. Is there any log which i can check to see what is wrong. Even when i click on Scheules link in BI publisher, it doesnot go ahead.
What may be the problem?
Thanks,
Prasad

Hi Prasad,
Are you still having the problem? Which version of BI Publisher are you running? If you are running an earlier version, then upgrade it to 10.1.3.3.3 and the problem gets solved. We also had the same problem when we were on 10.1.3.3.0 and now it's gone after we upgraded. Hope this helps.
-MS

Not able to schedule Webi and Crystal reports in Infoview

Hi All,
We are using Business Objects XI 3.1.
I am not able to schedule reports in Infoview irrespective of the report type.
The Webi report throws the error "Bad Request(Invalid URL)" when I hit on the Format Destination section.
The Crystal report without prompt hangs when I hit schedule button and the report with prompt throws the error "An error has occurred:Invalid postback or callback argument."
Recently we installed the Fixpack 1.2 for XI 3.1.
Thanks in Advance
Umesh

Hi Kilic,
You mean to say re-install the Java version.
Also there is issue in IIS Server. It always encounters a problem and stops. I have to restart the IIS Server. How to deal with these issues? Very confused
Thanks and Regards,
Umesh Jadhav
Edited by: umesh jadhav on Mar 27, 2009 10:07 PM

Urgent help needed, can I restore N900 Backup file...

i owned a N900 (now sold out)
before selling i took backup of contacts from backup restore option in application section
now i bought a N8 but i m not able to restore my contacts
1. is there any way to restore them in N8?
2. if not, can i convert them in TEXT or any readable format
urgent help needed
thanks in advance

The backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8.

Problem uninstalling MaxMSPRuntime on mac - urgent help needed

Hello there,
I've been using Cycle 74's MaxMSP Runtime version 5.1 for a while but recently had to witch to an earlier version to make some hardware function along side the Max runtime environment. The problem is that where i would usually just drag and drop Max 5.1 into the trash to uninstall it, for some reason, after i have done this and try to install the older version of Max, OSX wont let me install Max 4.0.8 as it says an updated version is currently installed. I have scoured my hard drive for the remanence of Max 5.1. and deleted everything i've found. Is there a way of overriding macosx and getting it to replace Max5.1 with an older version?
Urgent help needed as i am playing a show this weekend and currently am not able to get my equipment to function.
A shiny nickel for the one who saves my ***.
Thanks
Henry

Hi- Try this...
If you can, reinstall or use time machine to recover your recently deleted MaxMSP Runtime 5.1.
Then, download AppZapper. It is a utility that helps you cleanly delete programs off your mac. It is free for the first 5 uses.
http://appzapper.com/
Then, install AppZapper, and then go ahead and drag the MaxMSP Runtime 5.1 into it, and it should hopefully get rid of the pesky program

Lenovo U410 Urgent Help Will Not Turn On

Hello,
Firstly i would like to thank anyone reading this post and taking the time out of their day to try and help my problem.
I have a Lenovo U410 Ultrabook i've had my Laptop for around 1-2 years now and i have kept it in a very good condition there have been no issues with it. About 1 Week ago i was using my laptop left my room for about 30 minutes to have a shower and upon returning i saw that my Laptop was not charging i unplugged the charger from the laptop and place it back in nothing happened. so i turned off my laptop and unplugged the charger from the wall socket. since then i have not been able to turn my laptop back on i have tried but the led's flash twice when i tried to turn it back on. i have changed the fuse in my charger about 3 times with new fuses all 3AMP required and there is no difference at first i thought it was a problem with the charger but now im thinking otherwise and i'm quite worried. After searching around the internet for a fix i have pressed the power button for 30 seconds and the leds blinked 3 times and after trying various methods to turn it back on it has not been succesful i have even uplugged the battery and plugged it back in after removing the back cover. i have no warranty left as it expired and i was not able to renew it. if you have had any experience with similiar problems or any suggestions i would be very interested to hear what you think the next step for me would be. i dont have much money to invest into this laptop but i am prepared to spend some money if need be.
Thank you for reading my extremely long post,
Your's faithfully
Lenovo U410 Urgent Help Will Not Turn On
Akash Desai

Dear Evanacoleman
Welcome in Lenovo Community
Kindly contact the below support to check your machine at one of our service centers so that the technical team there can decide if this is a miss use case or not
Let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.

In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

Urgent help needed; Database shutdown issues.

Urgent help needed; Database shutdown issues.
Hi all,
I am trying to shutdown my SAP database and am facing the issues below, can someone please suggest how I can go about resolving this issue and restart the database?
SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01089: immediate shutdown in progress - no operations are permitted
SQL> shutdown abort
ORA-01031: insufficient privileges
Thanks and regards,
Iqbal

Hi,
check SAP Note 700548 - FAQ: Oracle authorizations
also check Note 834917 - Oracle Database 10g: New database role SAPCONN
regards,
kaushal

IPhone 3G 8GB Crashes when syncing with iTunes. URGENT HELP NEEDED.

I have latest iTunes and OS on my iPhone 3G...
Every time i plug my iPhone in it begins to sync and then iTunes will freeze and not respond..
I have tried re installing iTunes.. I can't reset my iPhone as i can't create a backup..
URGENT HELP NEEDED PLEASE!

I don't have an iphone, but if it's anything like my click-wheel ipod, a reset doesn't delete anything.
It just resets the ipod's operating system, kind of like a PC restart. Did you try this Sleep/Wake button thing mentioned here?
http://support.apple.com/kb/HT1737
Maybe it's a podcast of voice memo causing the problem like it did for this person
http://discussions.apple.com/message.jspa?messageID=10907809#10907809
That's all I got. You might have better luck on an iPhone forum. Everyone there would probably have one. Like I said, I don't.

Computer restarts when ipod is connected urgent help needed

alright this is weird, I've had my ipod for ages and suddenly I go to plug it in and the computer slows down really really really slow and eventually just turns it self off, restarts and then sits in a black screen. if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen, but both my ipod and computer work fine when there not connected. i have the latest version of itunes which seemed to help the first time i tried it actually started to update the ipod but then guess what the computer has another heart attack. urgent help needed please!!!

if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen
Given this, I'd put it down to a flaky power supply in the computer. Might want to try using another computer or replacing the PSU.

SSRS 2012 some users are not able to edit reports in the server

Hello All,
I am install reporting services SharePoint native mode but some users are not able to edit reports on server error is "Application cannot be started contact your application vendor" but this users edit reports on their client machine
using report builder 3.0.
Please help me

Hi harshad_mule,
Because Report Builder in the Report Manager is a ClickOnce application, the error message means that one or more of the files listed in the application manifest cannot be found on the server, so the application cannot be started. Based on my research, frequently
this means that the application is somehow corrupted, or that the ClickOnce store is corrupted.
To fix this issue, we can try to refer to the following steps:
If Report Builder is corrupted, we can update the Reporting Services to repair this.
Check that the Report Builder application is existing
Open the Report Server folder. By default, the folder is located in: C:\Program Files\Microsoft SQL Server\MSSQL.<X>\Reporting Services\ReportServer\ReportBuilder
Make sure the file "ReportBuilder.application" is existing in the folder mentioned above.
If it is existing, please use the following URL to access the Report Builder directly:
http://<server>/ReportServer/ReportBuilder/ReportBuilder.application
And this issue can also be caused by browser. Because not all report functionality is supported by all browsers in Reporting Services. So please use IE browser to start Report Builder to try it again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Garg

rohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

Urgent Help needed- Not able to schedule reports in BI Publisher

Similar Messages

Maybe you are looking for