Urgent help needed please help me out

i m trying to make a jar file for my package named as mainPanel
but when i run the gcs.jar file it gives following error " failed to load mainclass menifest attribute from e:/gcs/mainPanel/gcs.jar"
could you please explain me the procedure through an example for making a jar file for a package containing many subfolder.

http://catb.org/esr/faqs/smart-questions.html#urgent

Similar Messages

  • Urgent Help me out

    Hi friends,
    I exported a user from IBM RS6000 Aix 4.3.3 and imported in same machine on another database,there is no problem with import.
    But i tryed with same export file in HP unix
    IT IS GIVE ERROR FOR TWO BIG TABLE HAVING SIZE 278MB (record 737000),it is showing
    table1 0 rows imported
    table2
    partial import rollbacking 2295 rows
    error IMP 00009
    followed By IMP 00028.
    import tarminated sucsessfully with warning
    I had taken export:-
    1)startup restrict open
    exp
    -----system/manager
    -----default
    type-user
    -----compress=N
    ------saprerana
    exported sucsessfully without warning
    Import:------
    imp system/manager file=abc.dmp ignore='Y' fromuser=saprerana touser=saabd
    2)exp with Consistent=Y
    imp system/manager file=abc.dmp ignore='Y' fromuser=saprerana touser=saabd
    I am able to user both export file in RS6000 AIX 4.3.3 ORACLE 8.1.6
    BUT
    I am not able to use that export file in Hp unix Oracle 8.1.6.
    (Import of data from one database to another within HP unix to HP unix is working that means its not problem with Imp exe)
    Please Help me Out.
    Raj
    null

    Hi Raj,
    You can try using commit=Y in the imp command.
    Your error messsage seems related to a rollback Issue,Since you have around 7mill rows good to use this flag.
    or
    Offline all the rollbacks.create one big rollback with slightly more than the size of your biggest table then start the import.
    The chances of file being corupt b'cos it's from a different platform are to my knowledge not fact.Dump files are generic.
    Good Luck.
    null

  • Urgent advice needed please help!

    I need a new laptop asap that is the urgency part over with!
    The question is: How well would prem pro cs6 operate on a laptop system with:
    Intel i5 4200M dual core 3mb cache 2:6/3.2Ghz processor
    8gb ram
    nvidia gt740  2gb
    Keeping in mind I will mostly be just editing canon dale 1080p footage.
    Any help would be greatly appreciated.
    budget for laptop is 800 euro. So far the best all rounder for vid editing is: Toshiba s70-a-11h
    cheers

    That unfortunately is a common misconception with GPU acceleration. GPU acceleration handles certain frame features such as scaling interpolation, and some effects. It current does not handle decoding/encoding with Adobe. That is handled by the CPU. Because the Decoding has to start the process the CPU determines the overall performance/load on the GPU at any point in time. This also means that at any point in time the CPU is not necessarily handling less load. The CPU is just more focused on what it has to do such as decoding/encoding and many effects. All of this means no I dont think the 740M will change the user experience enough to stop the requirement for rending the timeline to playback. It will help but that is all. The CPU is really low for this type of compression. Pro Res or DNxHD would probably work ok on that CPU simply because the compression level is much lower and they are very efficient codecs with regards to performance. I would suggest looking at Cineform if you need to get this laptop and the realtime playback is not good enough for your workflow. Cineform allows you far better performance with more limited specs.
    BTW 8GB of ram is really low for GPU acceleration and HD. The biggest current mistake people are making is configuring systems without nearly enough ram to optimally handle the GPU acceleration. GPU acceleration requires a significant amount of ram because of how it works and transits through your system ram. Even if a system has the fastest CPU and best GPU, the performance is going to be poor if the system ram is to low. Most of the power available in that config would not even be utilized.
    Eric
    ADK

  • Urgent help - Punch out

    We are having a punch out issue with one of our suppliers catalog. We could log on to their portal linked with us, <b>but we are getting a suppliers general Portal page when we click return to requisition</b>, instead of returning the items to our shopping cart from the suppliers .
    The supplier is saying there is a problem with HOOK_URL.
    My question: Who should maintain the HOOK_URL? Supplier or Customer?
    we did not make any configuration changes on our side though.
    Thanks for your help.

    Hi
    Check the html form <b>returncart</b> whether the catalog items are returning back to shopping cart. Check the <b>action</b> parameter of this returncart form, what value is paased into this. This should be directed to your SRM applicatin.
    Rgds
    Reddy.

  • URGENT HELP ME OUT !!! NO FILED DEFINED FOR THE FUNCTION CODE

    hello friends,
                       I am working with module programming t-se80,
    i have made a simple screen with some filed on it.Along with this i have made gui staus with 2 icons create and display and i have assiged text to them also , also they appear in screen when i run the t-code.
    problem is that when i click on any of icon i am unable to debug my code and system prompts an information message
    "NO FILED DEFINED FOR THE FUNCTION CODE ".
    In the screen elements with elemnt ok if have assigned ok_code in the screen and also a data statement in the code.
    Still i m unable to monitor the debuger.
    when ever i run the t-code and on the debuger and when i click on the create icon nothing happens?/
    kindly help me urgently
    with thanks
    sam

    Hi,
    It seems you have not assigned Function codes to your buttons in GUI. Assign them d relevant fct codes in Screen Painter (if u've created 2 push buttons) or menu painter.
    Hope this wil soleve your problem.
    Reward points if helpful.
    Thnx
    Pradipta K Mishra

  • BBM Z10 not opening after app updates...​.Urgent solution needed please!!!.

    I did some applications updates yesterday and since then the BBM application on my Z10 refuse to open. Applications updated were afrinolly(v1.4.3.2), Adobe reader(10.1.0.4), box(1.2.0.79), and blackberry maps(10.0.0.639).Have tried the hard reset but it still refuse to open. Please what's wrong and what can I do. Thanks.

    Hi and Welcome to the Community!
    Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Urgent solution needed please

    Hi everyone,
    I am having a problem when i am trying to upload image to MysqlUSING jsP USER INTERFACES. I am using mozilla as a browser on Mandrake Linux platform. I am calling a bean Images.java which when run in konsole mode its working fine and image is getting uploaded.
    i am not able to understand why i cant upload using the JSP.
    hope u refer to my question and give me a solution for this.
    thanks,
    Harish.

    Check out UploadBean. It allows to upload files in a database.
    http://www.javazoom.net/jzservlets/uploadbean/uploadbean.html

  • Itunes problem. Urgent assistance needed please!!

    Hello:
    Yesterday I updated my itunes version and installed the new 7.0.2 version but every time that I open the itunes, my computer get restarted. Please let me know what I have to do to resolve my problem.
    Thank you very much.

    Yesterday I updated my itunes version and installed the new 7.0.2 version but every time that I open the itunes, my computer get restarted.
    are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
    if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)
    here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages
    if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
    1) Open your system control panel (Start->Control Panels->System).
    2) Select the "Advanced" tab.
    3) Click the "Startup and Recover" section's "Settings" button
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.

  • Nokia c7 urgent info needed please!!

    Basically i was in an SMS converstaion with my sister when i went to send her a message saying "not sure" next thing i know she is saying why did you swear at me? i say i didnt what you on about then i go through my outbox and see i sent a message telling someone to "F" off with a weird 181 number but my sister received it! This has then happened again to someone different with a different recipient receiving a weird message. 
    Any ideas???

    a little update on the problem. It appears that my phone is adding old messages to the end of my current ones when i send them. It pops up on the phone "feature not supported" then acts like it didnt send the message. When i look through the sent folder it shows that i sent the message to someone else even though they never received the message but the one i intended it for did receive it even though my phone says otherwise.
    It is all getting rather annoying now as i can no longer send messages without the phone adding something on the end of it.

  • BW error. Need urgent Help( I will give out full points).

    We have BW version 3.1 and content 3.3.
    We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
    The exception must either be prevented, caught within the procedure               
    "INSERT_ODS"                                                                     
    (FORM)", or declared in the procedure's RAISING clause.                          
    o prevent the exception, note the following:                                     
    atabase error text........: "ORA-14400: inserted partition key does not map to   
    any partition"                                                                   
    nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"                      
    lease check the entries in the system log (Transaction SM21).                                                                               
    ou may able to find an interim solution to the problem                           
    n the SAP note system. If you have access to the note system yourself,           
    se the following search criteria:                                                
    The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in       
    "INSERT_ODS".                                                                       
    he main program was "SAPMSSY1 ".                                                                               
    he termination occurred in line 41 of the source code of the (Include)              
    program "GP3WRFMGVS1D8IW16LLGSL4QQKH "                                              
    f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the       
    editor 410).                                                                        
    rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in      
    the                                                                               
    rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in         
    the                                                                               
    AISING clause of the procedure.                                                     
    he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code      
    starts in line 21                                                                   
    f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".                                                                               
    Please help me guys. I will award points for good answers.

    Dear Sir,
    Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
    Can you recommend me something? What did you do with partitions?
    Help me, please - I need urgent help too.
    GLEB ([email protected])
    P.S. Sorry for my English, I haven’t got any language practice for a long time.

  • Getting PROBE TIMEOUT Error....please help me out...It is urgent

    Hello,
    I'm running a stored procedure in oracle 10G that select data from one table and inserts the selected data into another table. The procedure populates for a short while and then I get the following messages:
    1. probe: timeout Occurred
    2. probe: Exception raised in the DBMS_DEBUG package
    Why is this happening and what should I do to resolve the above issue?
    Please help me out....This is really urgent...
    Thanks a lot in advance....
    Regards,
    Suranjita

    Please check Database alert log to see if any error is raised ?

  • Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!!

    Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.

    I can't, look at this image

  • Security status not satisfied.- very urgent - please help me out

    hi,
    I am using Java card (JCOP v2.241) and eclipse. Few days back I have implemented Caesar cipher and now I have installed another applet for DES... I did not do init update or key ..
    Now it is showing me security condition not satisfied.69 82
    Aborting execution error.
    I did for three times ....the same thing happened...I have searched this forums but I could not get a clear answer.... I donot have any idea abt external authentication..
    Now this shows that I cannot access the card. Is it blocked ....
    How to unlock it.. Please help me out.. How to delete the applets..
    when we use DES to implement should we use any init -update?? .I am using JCOP sample engineering card can I configure it to any other
    Any suggestions and replies highly appreciated
    Thanks
    CM.

    1. Where should I run this code. what will it show when I run this. It enumerates all installed applets and packages, currently installed in the JCOP emulator running on TCP port 8050.
    2. When I compiled it javac cardinfo.java I got 28 errors. I too. I corrected the code (see my post in the thread "Code Sample: cardinfo for JCOP41V22 Card").
    my first error says import com.ibm.jc.*; doesnot exist. should I add this package if so how can I ...You need to add the JCOP-library "offcard.jar" to the project classpath.
    Jan

  • Need to add JList to a Panel Please do help me out!!!

    hi every body I need to add JList to Panel in a JTabbedPaneand having three columns by gridlayout,I have to add Jlist elements in one column and in the second one get elements from the database and place them in this column with a check and in third column i have some buttons
    in the first column add Jlist elements around 10 elements
    in the second column can we use check(true/false) for the data which we got from the database,when we uncheck here the list corresponding in the first should be disabled.
    I am using swings please give me ur ideas can this be made in different ways how can this work
    i am trying this since yesterday but could't get the correct way
    do help me out
    thanking you
    with regards

    Just when you change status of radiobutton or checkbox in its changeListener event call
    setEnabled( false );
    for the appropriate JList
    I hope that you didnt wanted me explain you entire possible code and blah blah

  • Thanks.. can u please help me out in one more question. how can i transfer files like pdf, .docx and ppt from my laptop to iPhone 5 ? please its urgent.

    thanks.. can u please help me out in one more question. how can i transfer files like pdf, .docx and ppt from my laptop to iPhone 5 ? please its urgent.

    See your other post
    First, i want to know how can i pair my iPhone 5 with my lenovo laptop?

  • Oracle Express Batch Manager-Please Help me out-urgent

    Dear all,
    I have created a Relational Access Administrator project and mapped an Express Datamodel with RDBMS lookup and fact tables and created a Maintenance Procedure Using "Express Database Maintenance" from "Relational Access Administrator". After that when I tried to run that "Procedure" using "Batch Manager", it creates a Command definition file "~5848371.cmd" and nothing is showing in the "Job Monitor" tab of "Batch Manager". At the same time since it could not run the procedure, no Express database have been created to the specified path.
    Please help me out, as I am in need for this very badly. I have gone through the document "Relational Access Administrator(User Guide)" from otn.oracle.com, but nowhere such type of problem have been addressed.
    Thanking you in advance,
    regards,
    Manoj Ghosh,
    Mail ID: [email protected]

    There is a tutorial on building a chat application (or applet) on the ibm site.
    http://www-105.ibm.com/developerworks/education.nsf/dw/java-onlinecourse-bytitle
    You need to register to use it, but it is free.
    Hope this helps
    Peter

Maybe you are looking for