Urgent help needed to get this home page up!

Hi,
I need urgent help with this and it is driving me crazy. For
some reason my animation starts at its fastest and won't stop until
you click the area then it works properly. I have no clue why it is
doing this and only seems to do it on a PC browser not on a Mac.
Can anyone help please!!!!!
Link to sample:
http://www.totalamber.com/test.html
Link to fla:
http://www.totalamber.com/flash/homepage.fla
Thanks so much for anyone who can help or tries to help me.
Neil
Ps this is urgent and i can't find a solution by searching on
here

Thanks to anyone who has looked at this but i have found the
answer.
It is due to what many of the users on here will already know
and can be explained in this link:
http://blog.deconcept.com/swfobject/
I had forgot about the legal patent going on with microsoft!
Hope it helps anyone else as bad as i am.
Neil

Similar Messages

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

Urgent help needed -in customizing an OAF page --adding new button?

Hi,
We are currently implementing an OAF based oracle application.One of the requirements that the customer has is to display an additional button on the page button bar available out of box in an OAF page. This button needs to be enabled/disabled based on certain conditions. Also when the button is pressed a pl/sql api needs to be invoked. I know through personalization a new button can be created in the page button bar. But how do we handle the logic behind the button? Can we extend the page level controller?Will this survive future upgrades? If not then what is the alternative?
Please help!
Thanks!

You can follow the thread Calling PL/SQL Procedure for pl/sql call from controller example.
--Shiv

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

Can somebody please tell me how to fix this. when i try to install appleworks this pops up so please help me i need to get this on my mac

can somebody please tell me how to fix this. when i try to install appleworks this pops up
so please help me i need to get this on my mac

AppleWorks is a very old application and requires Rosetta to run under recent systems.
Lion does not include Rosetta.
If you browse this forum you will find many posts on this issue.

Urgent help needed!! Layout table and Draw layout cell dissapeared.

I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!

> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
>

URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.

In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

Help with RSS feed in home page

I'm trying to place an RSS feed in my home page. I've
followed this Dev
Center guide:
http://tinyurl.com/ewbdv
I've gotten everything to work perfectly locally. However,
when I upload
the files it won't work online here:
http://tinyurl.com/ootyn
The error I receive is:
Could not find the ColdFusion Component
burnettcom.includes.MM_XSLTransform.MM_XSLTransform.
Please check that the given name is correct and that the
component
exists. The error occurred in
C:\domains\burnettcom.com\wwwroot\home.cfm: line 28
26 : 
27 : <cfinvokeargument name="xml"
value="
http://www.burnettcom.com/blog/?feed=rss2">
28 : <cfinvokeargument name="xsl"
value="headlines.xsl">
29 : </cfinvoke></div>
Instead of the path
burnettcom.includes.MM_XSLTransform.MM_XSLTransform.
shouldn't it be
burnettcom/includes/MM_XSLTransform/MM_XSLTransform.cfm
This is the only thing that I can see that would be wrong.
Can anyone help me to get this to work online?
Thanks in advance.

Thanks A3gis, I just got that part working. I've configured
it to
display the title and date for each post.
The only problem is that the date appears as:
Tue, 18 Jul 2006 04:38:07 +0000
I would prefer the date to appear as:
July 18, 2006
or
6.18.06
Does anyone know how to make this work?
P.S. Here's the xls file:
P.S. my XSL fragment is:
<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE xsl:stylesheet [
<!ENTITY nbsp " ">
<!ENTITY copy "©">
<!ENTITY reg "®">
<!ENTITY trade "™">
<!ENTITY mdash "—">
<!ENTITY ldquo "“">
<!ENTITY rdquo "”">
<!ENTITY pound "£">
<!ENTITY yen "¥">
<!ENTITY euro "€">
]>
<xsl:stylesheet version="1.0"
xmlns:xsl="
http://www.w3.org/1999/XSL/Transform"
xmlns:wfw="
http://wellformedweb.org/CommentAPI/"
xmlns:content="
http://purl.org/rss/1.0/modules/content/"
xmlns:dc="
http://purl.org/dc/elements/1.1/">
<xsl:output method="html" encoding="iso-8859-1"/>
<xsl:param name="ItemsPerPage" select="10" />
<xsl:template match="/">
<xsl:for-each select="rss/channel/item[position()
<= $ItemsPerPage]">
<xsl:sort select="dc:date" order="descending" />
<p>
<a href="{link}"><xsl:value-of select="title"/>
</a><br />
<xsl:value-of select="pubDate"/>
</p>
</xsl:for-each>
</xsl:template>

Problem uninstalling MaxMSPRuntime on mac - urgent help needed

Hello there,
I've been using Cycle 74's MaxMSP Runtime version 5.1 for a while but recently had to witch to an earlier version to make some hardware function along side the Max runtime environment. The problem is that where i would usually just drag and drop Max 5.1 into the trash to uninstall it, for some reason, after i have done this and try to install the older version of Max, OSX wont let me install Max 4.0.8 as it says an updated version is currently installed. I have scoured my hard drive for the remanence of Max 5.1. and deleted everything i've found. Is there a way of overriding macosx and getting it to replace Max5.1 with an older version?
Urgent help needed as i am playing a show this weekend and currently am not able to get my equipment to function.
A shiny nickel for the one who saves my ***.
Thanks
Henry

Hi- Try this...
If you can, reinstall or use time machine to recover your recently deleted MaxMSP Runtime 5.1.
Then, download AppZapper. It is a utility that helps you cleanly delete programs off your mac. It is free for the first 5 uses.
http://appzapper.com/
Then, install AppZapper, and then go ahead and drag the MaxMSP Runtime 5.1 into it, and it should hopefully get rid of the pesky program

Cannot get a home page on my iPad!

I have gone through setup for iPad (twice). My email has been verified and I was able to sign up for the discussions, but I cannot get a home page on the iPad. I also cannot get my serial number to contact support. This is my first experience with an Apple product and I am very frustrated. I'm writing this from my PC. Any help would be greatly appreciated!

mtsue wrote:
but I cannot get a home page on the iPad.
Not sure what you mean by that. If you mean set a Starting page for Safari, then you can't. Safari will open up on the last page you browsed. If you close all tabs before exiting, it will jsut open to the gray screen. From there you can search using the google search at the top left of the address bar, or simply enter an address in the address bar.
mtsue wrote:
I also cannot get my serial number to contact support.
This can be easily obtained by flipping the iPad over and looking at the fine text at the bottom of the backside.
The Serial number is printed there.
Alternatively going into Settings->Geneal->About will have the serial number in the list of things about the iPad.
If you are finding it difficult to navigate around the iPad, perhaps setting up an appointment at the Genius Bar of your local Apple Store may be usefull. As they have Usage classes you can take.

Urgent help needed; Database shutdown issues.

Urgent help needed; Database shutdown issues.
Hi all,
I am trying to shutdown my SAP database and am facing the issues below, can someone please suggest how I can go about resolving this issue and restart the database?
SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01089: immediate shutdown in progress - no operations are permitted
SQL> shutdown abort
ORA-01031: insufficient privileges
Thanks and regards,
Iqbal

Hi,
check SAP Note 700548 - FAQ: Oracle authorizations
also check Note 834917 - Oracle Database 10g: New database role SAPCONN
regards,
kaushal

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

I have recently had a problem when turning my iPad on from shutdown, in that it takes at least four attempts to slide my finger across to get the home page. The screen is clean, and when I do eventually get the home page it all works perfectly. Any ideas?

I have a problem getting my IPad to start from shutdown. I get the Apple logo then when it is ready for me to slide my finger across the lower part of the screen to get the home page, it takes at least four attempts. When it does eventually open the home page, all works perfectly well. The screen is clean so I cannot see any reason for this annoying problem. Any suggestions will be gratefully received. Thank you. Colin.

i would reset it, then restore as new

IPhone 3G 8GB Crashes when syncing with iTunes. URGENT HELP NEEDED.

I have latest iTunes and OS on my iPhone 3G...
Every time i plug my iPhone in it begins to sync and then iTunes will freeze and not respond..
I have tried re installing iTunes.. I can't reset my iPhone as i can't create a backup..
URGENT HELP NEEDED PLEASE!

I don't have an iphone, but if it's anything like my click-wheel ipod, a reset doesn't delete anything.
It just resets the ipod's operating system, kind of like a PC restart. Did you try this Sleep/Wake button thing mentioned here?
http://support.apple.com/kb/HT1737
Maybe it's a podcast of voice memo causing the problem like it did for this person
http://discussions.apple.com/message.jspa?messageID=10907809#10907809
That's all I got. You might have better luck on an iPhone forum. Everyone there would probably have one. Like I said, I don't.

Urgent help needed to get this home page up!

Similar Messages

Maybe you are looking for