Urgent help needed: WEBAS server suddenly dead.. only SDM is working
Hi Everyone,
We have a WEBAS server installed on win 2003 mahcine. We wanted to install Visual composer and because there was no IIS on server, we installed it.
But after installation i am not able to access my server.
http://<server_name>:50000/index.html
is not working.. checked port 50000(using telnet ip_address port) and found this port is not in use any more..
but i am able to start SDM using remotegui.bat
in sap management console i can see sever is green.
Any idea what has gone wrong??
Thanks and regards,
Sudhir
Hi Sudhir
check in service file for following entry
http 80/tcp www www-http #World Wide Web
also check for follwoing service is runnig in windows 2003 server
IIS admin service
word wide web publishing service
the above service is needed for IIS working
alos check with http://localhost
(coz there is no problem with ur Portal system only problem with IIS )
if every think is ok check the event log for service in windows 2003 server
regards,
kaushal
Similar Messages
-
Some urgent help needed with MobileMe suddenly saying my password is wrong
Hi
First of all I want to say sorry if this is in the wrong forum, but I needed some urgent help and I couldn't find a forum other than this that might relate to this issue.
The issue that I am having is with my MobileMe Account. I was on my Mac, when when my MobileMe Account suddenly dropped its connection and told me that I had entered the wrong username or password (I know I hadn't) I tried to re-enter them but every time I try I just get a message that says I have entered the wrong username or password. I no longer have access to my Mail, I can not sing-in to MobileMe to access my online account and it wont let me change the password because it keeps saying that safari can not open the page.
I can not sign-in to my MobileMe folders on my Mac and it wont sync. I was signed in perfectly fine before this happened so I know its nothing to-do with my password or user name.
I am now locked out of MobileMe and need some help as to what might have went wrong
Can someone please give me some quick help as this is really worrying me as I am afraid my MobileMe account might of been hacked (that is the kind of behaviour that I am seeing - saying that my username and password are wrong, when they are not, and not letting me sign in to change them)
Huge thanksUghhh,
it seems my panic was for nothing. I just ran apple 24 hour support and they put it right for me it cost me but I'd rather be safe and pay then loose all the information I have on MobileMe. This has taught me a lesson anyway, I need to keep a backup of everything and not just rely on time machine -
Urgent help needed:oc4j server error coming while running web application
while running application below error is coming
2007-05-28 18:05:39.439 NOTIFICATION JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
2007-05-28 18:05:39.470 NOTIFICATION JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
2007-05-28 18:05:54.471 ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webappHello,
The notification messahes (JMS related) are here for information purpose and not related to your application.
The ERROR J2EE HTTP-00004 is related to your application, is looks like you have a misconfiguration or something bad with your application and the module/application named "datatags".
Could you please give more information about the application that you are deploying?
- how do you deploy it?
- what is the packaging? EAR or WAR, how did you package it? (Jdev or other?)
- what are the different modules that you are using? (web apps, ejb, ...)
- can you run the application from JDeveloper if you are using it?
Regards
Tugdual Grall -
URGENT HELP NEEDED: iMac screen suddenly going half dark?!
Hi..
So earlier tonight I was using my iMac perfectly, then had to stop since I was going out with friends for dinner and to see a performance and when I came back, shook my mouse awake my screen came back on from it's sleep mode and was fine and then the top half dimmed.
I tried messing with the lighting because I thought maybe my roommate's cat may have stepped on it, but it was at 100%. I rebooted, turned it off for 5 minutes then turned it on again and it comes on fully lit for a split second then dims at the top again. It's not black, but you can see that the screen has dimmed a lot. I'm attaching a picture, hopefully you can tell what I mean. It's a kind of crappy phone pic but that's all I have right now.
I bought this iMac in May 2007, so I doubt I have any warranty left and I can't remember or find paperwork to see if I bought apple care protection.
Does anyone know what this could be? I've read on another forum that it might be a back light going out. Any idea how much that would cost me?
Thanks!
Message was edited by: CallyKhSWell, some questions ?
I'm just another user and no expert, but:
*Might not want to shut it down until you have backed up your data, First!*
1.) Does everything else run good? --if "beach balling" badly, call an expert and I wouldn't shut it down or sleep it.
2.) Is there a hardware test you could run? --each version of OSX generally has something like disk utilities you can run. Try apple's downloads page for useful 3rd party utilities, assuming you can run them o.k. and everything "seems" fine except for screen.
3.) Do you have it plugged into a surge protector? --sometimes they get used up. You could (after verifying hardware and preferably backing up data) try it on another wall socket in another room, to check electrical viability. You might have a bad or dangerous wall outlet. If the wall gets really hot above the outlet, have it checked out immediately. Houses burn down every day from bad outlets and old aluminum electrical wire. (lol, I'm not saying anything bad about your house.....just trying to cover the basics). -
URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem
I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<!-- NOTE: This role is not present in the default users file -->
<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept). -
URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook
My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ... -
Urgent help needed, can I restore N900 Backup file...
i owned a N900 (now sold out)
before selling i took backup of contacts from backup restore option in application section
now i bought a N8 but i m not able to restore my contacts
1. is there any way to restore them in N8?
2. if not, can i convert them in TEXT or any readable format
urgent help needed
thanks in advanceThe backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8. -
Urgent help needed with un-removable junk mail that froze Mail!!
Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode. -
Computer restarts when ipod is connected urgent help needed
alright this is weird, I've had my ipod for ages and suddenly I go to plug it in and the computer slows down really really really slow and eventually just turns it self off, restarts and then sits in a black screen. if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen, but both my ipod and computer work fine when there not connected. i have the latest version of itunes which seemed to help the first time i tried it actually started to update the ipod but then guess what the computer has another heart attack. urgent help needed please!!!
if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen
Given this, I'd put it down to a flaky power supply in the computer. Might want to try using another computer or replacing the PSU. -
Urgent help needed; Database shutdown issues.
Urgent help needed; Database shutdown issues.
Hi all,
I am trying to shutdown my SAP database and am facing the issues below, can someone please suggest how I can go about resolving this issue and restart the database?
SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01089: immediate shutdown in progress - no operations are permitted
SQL> shutdown abort
ORA-01031: insufficient privileges
Thanks and regards,
IqbalHi,
check SAP Note 700548 - FAQ: Oracle authorizations
also check Note 834917 - Oracle Database 10g: New database role SAPCONN
regards,
kaushal -
Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls
Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks -
IPhone 3G 8GB Crashes when syncing with iTunes. URGENT HELP NEEDED.
I have latest iTunes and OS on my iPhone 3G...
Every time i plug my iPhone in it begins to sync and then iTunes will freeze and not respond..
I have tried re installing iTunes.. I can't reset my iPhone as i can't create a backup..
URGENT HELP NEEDED PLEASE!I don't have an iphone, but if it's anything like my click-wheel ipod, a reset doesn't delete anything.
It just resets the ipod's operating system, kind of like a PC restart. Did you try this Sleep/Wake button thing mentioned here?
http://support.apple.com/kb/HT1737
Maybe it's a podcast of voice memo causing the problem like it did for this person
http://discussions.apple.com/message.jspa?messageID=10907809#10907809
That's all I got. You might have better luck on an iPhone forum. Everyone there would probably have one. Like I said, I don't. -
IPhone 4 reset itself, photos lost -URGENT HELP NEEDED
Hi there,
Urgent help needed!!
Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
Thanks in advance!!!!Slymm71 wrote:
just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
See your other post...
https://discussions.apple.com/message/18876037#18876037 -
User Exit for Material Group...Urgent help needed
Does anybody have an idea of which user exit can be used to capture the changes made to material group in MM02(Material)..... Urgent help needed...
See the below user exit and this will trigger under MM01,MM02 and MM17 Transaction
Enhancement name : MGA00001
Function module :EXIT_SAPLMGMU_001
Include : ZXMG0U02
Reward Points if it is helpful.
Thanks
Seshu -
Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Gargrohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.
Maybe you are looking for
-
Can't import songs from CD to iTunes
I recently bought this CD and want to import the songs to my library. However, iTunes does not recognize the the CD is even in, and this external player pops up that is part of CD. When I try another way and remove the songs from the CD itself I cann
-
Viewing pdf files in safari 5.1.2
I am using Lion ans Safari 5.1.2 Accessing a pdf file briefly flashes the Quicktime symbol then opens the first page of the pdf file. Other pages are not accessible or viewable.
-
ODBC data sources not showing up in datasource selection list
when I go to change datasources for a report, newly created ODBC connections do not show up. I noticed they are all in the odbc.ini file and listed under ODBC in the machine directory/software folder in the registry but not under the current user/sof
-
Dell Equallogic SAN HIT Kit support for SAP in Linux 11.2
Hello Everyone, I would like to use an Equallogic SAN as storage in SUSE Linux Enterprise Server 11.2. Is the Equallogic SAN supported in Linux when using the HIT Kit to provide MPIO and snapshot support? The article from thorsten.staerk describes Eq
-
When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app do