Urgent Help Needed with Adobe Reader

I exported a single page of a document to adobe reader as a PDF file, and the document was deleted shortly there after. I now realize I need a few more pages from this document, so would there be any way to extract all the pages from the document from the single one I exported as a PDF? This is for a final porject, so a swift response would be greatly appreciated.

Nope. You need the original document. Sorry.

Similar Messages

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

Urgent help needed with reading data from Cube

Hi Gurus,
Can anyone tell me how to read a value from a record in the CUBE with a key (combination of fields).
Please provide if you have any custome Function Module or piece of code.
Any ideas are highly appreciated.
Thanks,
Regards,
aarthi

Due to the nature of the cube design, that would be difficult, that's why there are API's, FMs, and MDX capabilities - to eliminate the need to navigate the physical structure. Otherwise you would have to concern yourself with:
- that there are two fact tables E and F that would need to be read. The Factview could take of this one.
- you would want to be able to read aggregates if they were available.
- the fact table only as DIM IDs or SIDs (for line item dims) to identify the data, not characteristic values. A Dim ID represents a specific combination of characteristic values.

Help needed with Adobe Photoshop CC

I have installed Adobe Photoshop CC. All went well. Now, when I open a file, I get the following message -
When I try to re-install Adobe Photoshop CC the Adobe Applications Manager refuses and says my App is Updated. I can use Photoshop CC, but have no idea what files it claims are missing. So far the only problem I have had is that Content Aware doesn't work.
Just how do I comply with the message dialog box above and re-install the program?
Kindly advise and thank you.
Hal Kaye

Thanks for the suggestion! I found what the problem was. I dragged the old Adobe folder to the trash in an attempt to uninstall it. I then downloaded a fresh copy and installed that. When the Adobe 5.0 folder (for Adobe Reader 5.0.5) was open, I saw the "CoolTypeCarbonLib" file in it. I then double-clicked the Adobe Reader icon and it started just fine. Then, I pressed the Alt/Option key and dragged the Adobe Reader icon to make a copy on the desktop. When I double-clicked the icon I created on the desktop, I got the "CoolTypeCarbonLib" error. So, I made he mistake of incorrectly making a copy of the Adobe Reader icon on the desktop.
Now that it's working, how can I make an Adobe Reader icon on the desktop that will actually work?
have the Software Update CP check if you need any
updates. You don't have to use the Software Update CP
to download and install them, but I'm betting it'll
report about 6 required updates you should get.
CarbonLib v1.6 will be one of them.
As well as iTunes v2.0.4, AppleScript v1.8.3, Java
1.2.6, etc.
Ok, how do I do this? I'm not really a Mac user.
Thanks!
Peace...

Some urgent help needed with MobileMe suddenly saying my password is wrong

Hi
First of all I want to say sorry if this is in the wrong forum, but I needed some urgent help and I couldn't find a forum other than this that might relate to this issue.
The issue that I am having is with my MobileMe Account. I was on my Mac, when when my MobileMe Account suddenly dropped its connection and told me that I had entered the wrong username or password (I know I hadn't) I tried to re-enter them but every time I try I just get a message that says I have entered the wrong username or password. I no longer have access to my Mail, I can not sing-in to MobileMe to access my online account and it wont let me change the password because it keeps saying that safari can not open the page.
I can not sign-in to my MobileMe folders on my Mac and it wont sync. I was signed in perfectly fine before this happened so I know its nothing to-do with my password or user name.
I am now locked out of MobileMe and need some help as to what might have went wrong
Can someone please give me some quick help as this is really worrying me as I am afraid my MobileMe account might of been hacked (that is the kind of behaviour that I am seeing - saying that my username and password are wrong, when they are not, and not letting me sign in to change them)
Huge thanks

Ughhh,
it seems my panic was for nothing. I just ran apple 24 hour support and they put it right for me it cost me but I'd rather be safe and pay then loose all the information I have on MobileMe. This has taught me a lesson anyway, I need to keep a backup of everything and not just rely on time machine

URGENT - HELP NEEDED WITH ECC 6.0 ACCESS KEY and USER SETUP

Please help me with the two issues:
1) In ECC 6.0, When I go to SE12 , table V-FAGL_ACTIVEC (New GL Activation) to make the table display and maintenance allowed, I am asked for the access key. What is the access key that I am supposed to put here. When I go to DEVACCESS table and put my username, I still dont get the access key.
2) Also I need to know what should be maintained under SU01 to give a user all authorizations. I have SAP_ALL and SAP_NEW. Is there anyother profile need to be given here. Also do I need to give anything under roles tab in order for the user to have all accesses??

OK I have TAR for this:
TAR 4234076.996
and related issue discussed in regards to 500 Internal Server Error described on Neverending frustration with JDeveloper
with the TAR number
TAR 4332393.995
The latter has been demonstrated and confirmed to be a BUG at this point. For the future updates on this issue please refer to
Neverending frustration with JDeveloper

Urgent help need with Spry Submenu Bar

Am new to Dreamweaver and do not use code. Am trying to align spry submenus directly below their respective spry menu bars. Please advise as to what CSS style I need to modify and what I should necessarily modify within that style.
Thank you.

Am new to Dreamweaver and do not use code.
Welcome to Dreamweaver. If you don't use code, now is the time to start learning. Otherwise, everything you do in Dreamweaver is going to be an uphill struggle. Dreamweaver is a professional web development tool that requires at least a basic knowledge of both HTML and CSS. You can find a lot of CSS tutorials in the Adobe Developer Connection at http://www.adobe.com/devnet/dreamweaver/css.html.
Spry submenus automatically line up with the main menu items, so it sounds as though you have done something to knock them out of alignment. The only way that anyone can help with design issues is for you to upload the problem page to a site, and post the URL here. Since you're new to both Dreamweaver and the forum, take a few moments to check out How to get help quickly and the Dreamweaver FAQ. Both should save you some time.

Urgent Help Needed with missing frames

Hi guys
I have a student with an urgent problem that I can't seem to fix.
The student is making a film having shot it on mini DV tape. He has been editing the film in Adobe Premiere Pro CS5.5, editing sections in different sequences.
The problem he is having is when he moves a selection of clips on his timeline random frames or half frames disappear, leaving a very quick flash to black.
I cant work out why the frames are disappearing when moving clips up and down the timeline, any suggestions?
Thanks
SteveG

The settings for a sequence cannot be changed once it is created.
If source footage is being interpreted wrongly, right-click the source file on the project panel and choose Modify > Interpret Footage. You can now create a new sequence that matches the real properties of your footage.
Dragging one sequence into another won't cure the problem; you have to copy the footage from the timeline into the new sequence so it reverts to the new sequence frame rate (assuming the footage has been defined properly in the project panel it will then be correct).

Urgent help need with WRE54G ver3

Hi, I need help with this range expander.
By some divine miracle I managed to connect my WRE54G to BT router successfully.
The main purpose for me buying this product is to get the range to use on my Playstation 3
So, I've got the WRE54G set up to extend my routers range, and it is working. My PS3 can detect it.
The problem is that if I try to connect to it, I cannot obtain the IP address.
This happens if anything tried to connect to the WRE54G, it does not seem to be giving out the IP address
Please help!

This means your WRE is not configured properly..When your WRE is connected to the Power Outlet, whats the Light status on the WRE, Is both the Link and Act Light on your WRE is Blue?
When your computer is connected to the Router, whats the IP address you computer is getting ? To find out the IP address click on Start - RUN - CMD and click Ok, now in the Command Prompt type "Ipconfig" and hit enter, and note down the IP address and the Default Gateway..
When you Configure your WRE, make you sure your WRE IP address is in the same segment of your Router. The Default IP address for the WRE is 192.168.1.240..
Make sure the Wireless Settings of your WRE and your Router is same..
Click Here and Follow the instructions how to configure your WRE.

Help Needed with Adobe Interactive Forms scripts

Hi Gurus,
I have an Interactive form in which I have 5 radio buttons. Upon selecting any one of the radio buttons, some values (Ex : If user selects the first radi button 20 should be displayed in the text box. If he selects the second 21 should be displayed in the textbox.). In my script, I need to capture the checked value of the radio buttons ( They are grouped) and how I should reference radio button on the form/subform
Regards,
Srini

Where to start with scripting:
http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf
http://help.adobe.com/en_US/livecycle/es/FormCalc.pdf
In first doc, check the last chapter for the most illustrative examples.
You need to be able to get the value of the radio (var help = this.rawValue), use the condition (if (){} else {} )and set the value (this.rawValue = "").
Otto

Urgent help needed with Lucida Grande

I have to use this font for a project, I can't get away with Lucida sans, it HAS to be Lucida Grande.
I don't quite know what is going on but I have some text in Lucida Grande Regular which is all fine, I tried creating another text box but it's showing up as Lucida Grande Bold? I tried to change it to Regular but there's no option for it? When there is regular font right next to it?
If this is something really simple I'm sorry! This is my first time using indesign, if it was my choice I would of used something I was more familiar with. The deadline is on Friday so it's urgent I get help so it doesn't get presented half bold half not.
Using CS5, on Windows Vista

Yes that's fine. Unfortunately is doens't show something obviously out of the ordinary.
I gues the next ting is to see if the font is available in a new document. If it is, try this on the one giving you trouble: Remove minor corruption by exporting
If not, you should look at: Replace Your Preferences

Urgent help needed with installation of Logic!

Hi I just installed Logic Pro 9 on the Macbook Pro I bought today and it failed because 'this version of OSX is not compatible with Logic 9.1.1.' What should I do? Two years ago I installed the same version on my previous Macbook. Both Apple and the reseller said it was going to be fine. Please help me as quickly as possible. I need to use it in a couple of hours...thanks. Xavier

Restart your Mac and Run Software update

Urgent help needed with CP5 on Windows 7 64 bit and 'old' CP 5 projects.....

Hi,
I have a serious problem, at least the sympthoms are very serious.
I have worked on a lot of projects with CP 5 on Windows Vista Ultimate 32 bit.
CP5 was installed on the default root C:\Programs....
These projects partially contained recordings (demos, assessments...) of applications running on a Windows XP 64 computer.
Projects stored on E:\.....
All was OK
THEN:
I upgraded my OS to Windows 7 64 bit a couple of days ago.
D: and E: partitions were untouched by the new OS install.
Intalled CP5 on D:\..... not on default path C:\Programs...as I want to keep C: as clean as possible out of performance reasons.
All is OK except that:
- MINOR ISSUE: the projects on in the browser do not show assosiation to CP5 graphically as they used to in front of project name, this is the same for all other MasterSuite CS5 (also installed on D:...) applications too:
- MAJOR ISSUE: the demonstrations run properly but the results of action are graphically misplaced after generating the project:
Recording new demo projects on my system and generating them is OK
Can you please help to clarify and find solution so that my projects run properly.
Thanks in advance for your FAST help!!!!!
Stephanie

Hi there
My gut tells me it's not so much an issue with Captivate as it may be an issue with the new Windows 7 setup. You might try right-clicking the Windows 7 desktop and choosing Personalize. Then in the lower left corner of the dialog, choose Display. See if you are configured for 100% or if it's something different. If it's something different, try choosing 100% and see if it helps.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

(Urgent help needed) how to read txt file and store the data into 2D-array?

Hi, I have a GUI which allow to choose file from the file chooser, and when "Read file" button is pressed, I want to show the array data into the textarea.
The sample data is like this followed:
-0.0007     -0.0061     0.0006
-0.0002     0.0203     0.0066
0     0.2317     0.008
0.0017     0.5957     0.0008
0.0024     1.071     0.0029
0.0439     1.4873     -0.0003
I want my program to scan through and store these data into 2D array.
However for some reason, my source code issues errors, and I don't know what's wrong with it, seems to have a problem in StringTokenizer though. Can anybody help me?
Thanks in advance.
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.StringTokenizer;
public class FileReduction1 extends JFrame implements ActionListener{
// GUI features
private BufferedReader fileInput;
private JTextArea textArea;
private JButton openButton, readButton,processButton,saveButton;
private JTextField textfield;
private JPanel pnlfile;
private JPanel buttonpnl;
private JPanel buttonbar;
// Other fields
private File fileName;
private String[][] data;
private int numLines;
public FileReduction1(String s) {
super(s);
// Content pane
     Container cp = getContentPane();
     cp.setLayout(new BorderLayout());
// Open button Panel
pnlfile=new JPanel(new BorderLayout());
     textfield=new JTextField();
     openButton = new JButton("Open File");
openButton.addActionListener(this);
pnlfile.add(openButton,BorderLayout.WEST);
     pnlfile.add(textfield,BorderLayout.CENTER);
     readButton = new JButton("Read File");
readButton.addActionListener(this);
     readButton.setEnabled(false);
pnlfile.add(readButton,BorderLayout.EAST);
     cp.add(pnlfile, BorderLayout.NORTH);
     // Text area
     textArea = new JTextArea(10, 100);
cp.add(new JScrollPane(textArea),BorderLayout.CENTER);
processButton = new JButton("Process");
//processButton.addActionListener(this);
saveButton=new JButton("Save into");
//saveButton.addActionListener(this);
buttonbar=new JPanel(new FlowLayout(FlowLayout.RIGHT));
buttonpnl=new JPanel(new GridLayout(1,0));
buttonpnl.add(processButton);
buttonpnl.add(saveButton);
buttonbar.add(buttonpnl);
cp.add(buttonbar,BorderLayout.SOUTH);
/* ACTION PERFORMED */
public void actionPerformed(ActionEvent event) {
if (event.getActionCommand().equals("Open File")) getFileName();
     if (event.getActionCommand().equals("Read File")) readFile();
/* OPEN THE FILE */
private void getFileName() {
// Display file dialog so user can select file to open
     JFileChooser fileChooser = new JFileChooser();
     fileChooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
     int result = fileChooser.showOpenDialog(this);
     // If cancel button selected return
     if (result == JFileChooser.CANCEL_OPTION) return;
if (result == JFileChooser.APPROVE_OPTION)
     fileName = fileChooser.getSelectedFile();
textfield.setText(fileName.getName());
     if (checkFileName()) {
     openButton.setEnabled(false);
     readButton.setEnabled(true);
     // Obtain selected file
/* READ FILE */
private void readFile() {
// Disable read button
readButton.setEnabled(false);
// Dimension data structure
     getNumberOfLines();
     data = new String[numLines][];
     // Read file
     readTheFile();
     // Output to text area
     textArea.setText(data[0][0] + "\n");
     for(int index=0;index < data.length;index++)
for(int j=1;j<data[index].length;j++)
textArea.append(data[index][j] + "\n");
     // Rnable open button
     openButton.setEnabled(true);
/* GET NUMBER OF LINES */
/* Get number of lines in file and prepare data structure. */
private void getNumberOfLines() {
int counter = 0;
     // Open the file
     openFile();
     // Loop through file incrementing counter
     try {
     String line = fileInput.readLine();
     while (line != null) {
     counter++;
          System.out.println("(" + counter + ") " + line);
line = fileInput.readLine();
     numLines = counter;
closeFile();
     catch(IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error reading File",
               "Error 5: ",JOptionPane.ERROR_MESSAGE);
     closeFile();
     System.exit(1);
/* READ FILE */
private void readTheFile() {
// Open the file
int row=0;
int col=0;
     openFile();
System.out.println("Read the file");
     // Loop through file incrementing counter
     try {
String line = fileInput.readLine();
     while (line != null)
StringTokenizer st=new StringTokenizer(line);
while(st.hasMoreTokens())
data[row][col]=st.nextToken();
System.out.println(data[row][col]);
col++;
row++;
closeFile();
catch(IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error reading File",
               "Error 5: ",JOptionPane.ERROR_MESSAGE);
     closeFile();
     System.exit(1);
/* CHECK FILE NAME */
/* Return flase if selected file is a directory, access is denied or is
not a file name. */
private boolean checkFileName() {
     if (fileName.exists()) {
     if (fileName.canRead()) {
          if (fileName.isFile()) return(true);
          else JOptionPane.showMessageDialog(null,
                    "ERROR 3: File is a directory");
     else JOptionPane.showMessageDialog(null,
                    "ERROR 2: Access denied");
     else JOptionPane.showMessageDialog(null,
                    "ERROR 1: No such file!");
     // Return
     return(false);
/* FILE HANDLING UTILITIES */
/* OPEN FILE */
private void openFile() {
     try {
     // Open file
     FileReader file = new FileReader(fileName);
     fileInput = new BufferedReader(file);
     catch(IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error Opening File",
               "Error 4: ",JOptionPane.ERROR_MESSAGE);
System.out.println("File opened");
/* CLOSE FILE */
private void closeFile() {
if (fileInput != null) {
     try {
          fileInput.close();
     catch (IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error Opening File",
               "Error 4: ",JOptionPane.ERROR_MESSAGE);
System.out.println("File closed");
/* MAIN METHOD */
/* MAIN METHOD */
public static void main(String[] args) throws IOException {
     // Create instance of class FileChooser
     FileReduction1 newFile = new FileReduction1("File Reduction Program");
     // Make window vissible
     newFile.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     newFile.setSize(500,400);
newFile.setVisible(true);
Java.lang.NullpointException
at FileReductoin1.readTheFile <FileReduction1.java :172>
at FileReductoin1.readFile <FileReduction1.java :110>
at FileReductoin1.actionPerformed <FileReduction1.java :71>
.

1) Next time use the CODE tags. this is way too much unreadable crap.
2) The problem is your String[][] data.... the only place I see you do anything approching initializing it is
data = new String[numLines][];I think you want to do this..
data = new String[numLines][3];anyway that's why it's blowing up on the line
data[row][col]=st.nextToken();

Urgent help need with 8i/9iAS install

Hello,
I need some help, preferably a summarized point list of how to install Oracle 8i and Oracle 9iAS to run WebDB (Portal). Is it required that I need some patches from Oracle?
I am having a tough time trying to make the Portal work on my machine: (Win2000 pro/128 MB/P III ~866MHz
Any help would be appreciated very much.
Thanks in advance

Hi! Here are some of the things that you need to do, in order to Install Portal.
Questions you should ask yourself before installing Portal:
1: Do you already have a Database to Start with. Oracle Portal Successfully installs on only Supports Enterprise Editions of Oracle 8.1.6 Edition and 8.1.7 (Both Standard and Enterprise Editions)
2. If you already have a Oracle 8i Database, remember your sys password, as this is needed to install Oracle Portal. The database Listener(TNS Listener) should be up and running before installing Oracle Portal.
3. If your Oracle 8i HTTP Listener( Which is Apache Server Listener which comes by default with every Oracle 8i installation) is Running, PLEASE SHUT THAT OFF OR CHANGE THE SETTING TO MANUAL MODE, or Remove that from the Services Directory, Since, this is just a Basic Apache Server which does not have any of the Pl/sql gateway's and/or other Gateway settings that are required for Installing Oracle Portal.
4. If you have Oracle 8i Database, Increase the Following Settings to the below mentioned limits in your ini<SID>.ora file
large_pool_size =60000000
java_pool_size = 5000000
shared_pool_size=6000000
Space of "USERS" Table Space =200MB
Space of "TEMP" Table Space =200MB
Space of "SYSTEM" Table Space="600MB"
Shut Down the Instance and Restart the instance in a Normal mode.
5: Install Oracle IAS on a seperate Directory or Home than the Oracle 8i Home.
6. Now you are ready to use Portal30 Configuration Assistent.
Start the Configuration Assistent, Follow through the Steps and you should be able to install successfully.
A Couple of Hints.
Make sure the Computer Name you are installing Oracle Portal on is in Lower Case.
Usually the installation takes a Couple of Hours depending upon your processor Speed and Memory available.
Please check to See if there are any Errors in the Installation Logs.
Check on Technet.oracle.com to see any Installation White Papers Out there.
I hope this Helps
Ram Kakani

Urgent Help Needed with Adobe Reader

Similar Messages

Maybe you are looking for