URGENT help on ESS-ITS

Hi,
URGENT Issue:
When ITS is accessed through Mozila Firefox 2.0 browser(not happening in IE), the screen freezes giving an Error:
uncaught exception: Permission denied to get property SAPWF_nfop
in the Error console
Points will be rewarded
BR, Abdul

SAP ITS 6.20: Support for Firefox 2.0 -
Support for Firefox 2.0 starts as of patchlevel 23 of SAP ITS 6.20.
Product availability matrix says above so upgrade your firefox from 22 to 23

Similar Messages

Error in opening a file .......... plz help ... its urgent

here is the code
filename := '/dev60temp/asif.csv';
csv_file := TEXT_IO.FOPEN(filename,'a');
when i try to create file using this code, it gives error as
soon as fopen is called. /dev60temp/ is virtual path which is
mapped to a folder on my localmachine.
Plz oracle team help ... its really urgent.

if u want to open the file from the server u have to use
utl_file package, the text_io is used only for client side
files.for that it's not necessary to give out the virtual path.

Help needed-ESS/MSS for Travel Mgt

Hello People,
I have a scenario where the Trip request is either raised by employee or the supervisor on behalf of employee, which then goes for 3 levels of approval. Now when you execute transaction TRIP in R/3, sap creates a travel request and that goes for an approval to A002 /A012. Thus it gets approved.
Now I want to do the same thing in ESS/MSS. I know in ESS there is a standard Tab available for Travel. Can anyone help me with details of config to have employee raise trip request and that going to UWL of MSS or POWL of ESS where it gets approved. Also what are the possibilities to cover the whole scenario in ESS/MSS.
I am intending to do it in standard so Transaction IVIEW of TRIP is not desired by me. Urgent help is requested. Comprehensive guide for this config would be like a icing on a cake. Thx.Scenario steps is as below
1) employee or Supervisor of employee raises Trip request in ESS
2) It goes for 3 levels of approval either in POWL of ESS or UWL of MSS
3)Approved/Rejected.
4)Automails
Thx again

Dear Rajaram
You can have the WD
FITV_POWL_APPROVER
used in 2 ways:
1) reading the POWL data defined with personalization
To personalize that you will need to run this WD
FPB_DIALOG_COMP with App. ID: FITV_POWL_PERSONALIZATION
2) otherwise if you want to have FITV_POWL_APPROVER reading the trips from the inbox instead
you can enhance its feeder class
CL_FITV_POWL_TRIPS_TOBEAPPROVE
With 2nd option you can always create a workflow around BOR object: bus2089.
And in that workflow you can put your sending emails, etc...
Kind Regards
/Ricardo Quintas

Report is not getting displayed in ESS (ITS version)

Hi ,
I often create reports in ABAP HR and display them in ESS (ITS) .
But this time , report is not displaying the contents of internal table .I have first time used BAPIs to pass the values to internal table .
Is it the reason ??
Please help me in ths regard how can I make my report displayed in ESS.

Please make your transaction code as easy web transaction form SE93 and then try.

URGENT HELP NEEDED (Bios Settings Failed)

Hey Guys,
I am having problems with my MSI Board, and don't know what to do. I am very much a noob to BIOS/and modding so I apologize in advance. You guys helped me a few months ago getting everything up and running and all was great for months. Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well. I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again. This allowed me to load windows 7, which then started to "install updates". So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread: https://forum-en.msi.com/index.php?topic=147854.0
However, last week I removed the heat sink and installed this cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB. The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally. However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks. I also should note I didnt make any BIOS changes either after I installed the cooler. So I don’t know if I should have done something there. Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do. I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable. But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
So I am begging anybody for any advice or help they could provide. I will provide my system info below. If anybody can guide me as to what settings I should set in BIOS i would appreciate it. Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink? If you need any more information from me, just ask. I will be monitoring this thread all day, as I desperately need help.
MY SYSTEM:
Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
(1) SATA II WD 3gb Hard Drive @ 1.5TB
(2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
1 SATA DVD DRIVE
1 SATA BlueRay Drive
1 SATA CD Drive
(So 8 SATA Devices Total)
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
1 NVida Geforce GTX 470
1 Soundblaster X-Fi Titanum Card
New Addition Water Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010

PROBLEM: My OC BIOS setting wont load. Even on failsafe i get the "double start". I want to get back to my OC (stable) settings.
UPDATE: Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler. So I did that, and now they system starts fine without the "double start". I am able to load one of my saved OC settings now as well (but any others causes a failure).
NEW QUESTIONS:
1. Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now?
2. I never made any power changes or BIOS changes after I installed the new cooler. Should I have?
3. After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again? I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
4. Is there a new BIOS version for my setup that may be better now? Im currently on v1.5
Here is a screenshot from CPUZ of the system information currently. This is with it booting normally after my CMOS reboot. I just figured id post it incase it helps with any of my questions. Thanks so much for helping guys!

URGENT HELP NEEDED!!! (Almost a matter of life and death)

Well, it's more of a matter of failing a course or not...
Anyway, my Java professor gave us some labs to do. I know Java front and back, at least, whatever version I learned a few years back. This is my first tenure with the Scanner object, and it's messing me up.
I'm using Eclipse for my project. I have three files in the source folder, ABC_Manufacturing.java, mseast.dat and mswest.dat. Now, when I try to instanciate a new Scanner object, it won't find the files:
Scanner east = new Scanner(new FileReader("mseast.dat"));
Scanner west = new Scanner(new File("mswest.dat"));
I'm trying two seperate ways to do this. Neither are working, this is the error I get:
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
     Unhandled exception type FileNotFoundException
     Unhandled exception type FileNotFoundException
     at ABC_Manufacturing.main(ABC_Manufacturing.java:38)
Now, I added these files OVER and OVER again. I added them. I created new files and pasted the contents in there. I used .txt files. All the same error. It's like it just won't take the time out to look for the files that are RIGHT IN THE DAMN PROJECT! Then I tried using a complete path, using C:\Java\whatever. SAME ERROR!!!!
Please, I need urgent help. This is due tomorrow at noon, and I have no idea what to do at this point. I can't really continue, because at this point its just looking at what prints out and formatting it, and I don't want to do that without testing to see if my code to convert the file data into arrays work. You dig? Thanks for any and all help, and I'm going to kill my professor...she spent a week going over parallel arrays but did nothing to show us how to import files into projects or use the scanner class. Also it doesn't help that at uni we have to use emacs, which I don't use at home.

d00erino wrote:
This is the the main class, so far:
public static void main(String[] args)throws IOException
          Scanner west = new Scanner(new File("mswest.dat"));
          int [] eastParts = new int[13];
          int [] eastQuant = new int[13];
          int [] westParts = new int[17];
          int [] westQuant = new int[17];
          System.out.print(west.nextInt());
And I didn't ignore that one guy (sorry, don't remember your username) I tried you and the other guy's responce. Both didn't work. I dunno how to get around errors. Figures, you don't learn that in the course but she'll spend a week on parallel arrays...Ok, well that can't possibly be complaining with the same error message you got before, so now you need to be (more) specific about what "didn't work" means.

Urgent help needed to get this home page up!

Hi,
I need urgent help with this and it is driving me crazy. For
some reason my animation starts at its fastest and won't stop until
you click the area then it works properly. I have no clue why it is
doing this and only seems to do it on a PC browser not on a Mac.
Can anyone help please!!!!!
Link to sample:
http://www.totalamber.com/test.html
Link to fla:
http://www.totalamber.com/flash/homepage.fla
Thanks so much for anyone who can help or tries to help me.
Neil
Ps this is urgent and i can't find a solution by searching on
here

Thanks to anyone who has looked at this but i have found the
answer.
It is due to what many of the users on here will already know
and can be explained in this link:
http://blog.deconcept.com/swfobject/
I had forgot about the legal patent going on with microsoft!
Hope it helps anyone else as bad as i am.
Neil

Urgent help needed! How do I use Time Machine to restore my System disc?

I need urgent help. First I discovered that my Library folder was empty. When I tried to restore the library to an earlier version via Timemachine it would not let me because it said the system was in use. Trying to start-up from another system on another internal drive and using various disc repairs resulted in the whole volume to disappear.
Question is how do I get the earlier system from my Timemachine backup drive? I have another Mac where I can attach the TIme machine HD to. Can I restore it from there and then copy the files over to my corrupted disc? All my programs are on there as well, which would take me days to re-install and then there are the other bits, emails, photos etc. Can anyone help?

lightandmagic wrote:
Thanks for your sympathy Pondini and the encouragement. You just reminded me that I will lose a whole working day restoring !!! Do you happen to know where the emails are kept on the system and the address book? I better nick those as well as my other life sustaining bits before its too late. I don't trust anything any more.
I don't know what you mean by "nick those." Time Machine will put everything back the way it was at the time of the backup (unless you'd excluded things).
Do you mean you want to restore things from the period after the backup you selected?
For Address Book or Apple Mail, start the application, then +Enter Time Machine,+ navigate to your latest backup, and you'll have a prompt to restore. For Mail, you can restore an entire mailbox. When you exit from TM, you'll see a new folder in your Mail sidebar with the restored items, so you can sift through them and move, delete, or leave them as you wish.
Other items, you'll have to locate and restore via the Finder > Time Machine.

Urgent help required "java.lang.Exception: Connection reset"

Hi Everyone,
I am getting error message when I access cluster database from grid console.
Error java.lang.Exception: Connection reset
I am unable to create jobs or do other admin stuff on the database, I have searched alot , restarted the repository database, restarted the emgc components, even the agents but of no use. The agent status showing OK as under.
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.3.0
OMS Version : 10.2.0.3.0
Protocol Version : 10.2.0.2.0
Agent Home : /app/oracle/agent/agent10g/rac2.tawaf
Agent binaries : /app/oracle/agent/agent10g
Agent Process ID : 19646
Parent Process ID : 19629
Agent URL : https://rac2.tawaf:3872/emd/main
Repository URL : https://tawafapp.tawaf:1159/em/upload
Started at : 2009-04-02 11:26:10
Started by user : oracle
Last Reload : 2009-04-02 11:26:10
Last successful upload : 2009-04-02 12:27:42
Total Megabytes of XML files uploaded so far : 3.48
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 86.22%
Last successful heartbeat to OMS : 2009-04-02 12:30:20
Agent is Running and Ready
The error reported in emoms.log is as under.
2009-04-02 12:37:25,073 [MetricCollector:RACHOMETAB_THREAD600:60] ERROR rt.RacMetricCollectorTarget _getAllData.184 - oracle.sysman.emSDK.emd.comm.CommException: Connection reset
oracle.sysman.emSDK.emd.comm.CommException: Connection reset
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1543)
at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:915)
at oracle.sysman.emo.rac.perform.metric.rt.RacHomeTab._getAllData(RacHomeTab.java:180)
at oracle.sysman.emo.rac.perform.metric.rt.RacHomeTab.getData(RacHomeTab.java:91)
at oracle.sysman.emo.perf.metric.eng.MetricCached.collectCachedData(MetricCached.java:404)
at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread._collectCachedData(MetricCollectorThread.java:596)
at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread.run(MetricCollectorThread.java:320)
at java.lang.Thread.run(Thread.java:534)
can anyone help me as its very urgent for me to clear this error.
thanks

this error is also reported against the cluster database.
Thread: SeverityLoad https://rac2.tawaf:3872/emd/main java.sql.SQLException: ORA-20613: Severity for unknown target. (target guid = 1938FC9C72DDAC01E0C0F268FFC5F6AD) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 174 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 43, File name:Severity

Urgent help required to write the code in update routine

Hi all,
i want to calculate open purchase order qty in update routine
formula is
open purchase order qty = scl qty - rec qty
where schd line date is less then or equal to 90 days from the current date.
I have written one code : but its giving error that comm_structure is not defined in abap dictionary,can any body help to write appropriate routine. this calculation i am making for MM, and data source and cube are 2lis_02_scl and cube is zc_pur01 ( made by coping the 0pur_c01), data source scl has all fields required in the foumula...here is my code
DATA: COMM_STRUCTURE LIKE /BIC/CS2LIS_02_SCL.
DATA: SCL_QTY LIKE COMM_STRUCTURE-/BIC/ZK_SCLQTY.
DATA:      GR_QTY LIKE COMM_STRUCTURE -/BIC/ZK_GRQTY.
DATA: SCL_DATE.
SCL_DATE = SY-DATUM + 90.
SELECT COMM_STRUCTURE -/BIC/ ZK_SCLQTY COMM_STRUCTURE -/BIC/ ZK_GRQTY FROM
/BIC/CS2LIS_02_SCL INTO   SCL_QTY     GR_QTY
WHERE
COMM_STRUCTURE -/0SCHED_DATE LE SCL_DATE.
IF SYSUBRC = 0
RESULT = SCL_QTY - GR_QTY.
ELSE = NOVALUE.
ENDIF.
Can any body help me soon its very urgent.
thanks

Hi Anupam,
I am not a very good ABAP Programmer, but found some things to notify u inyour code..
DATA: COMM_STRUCTURE LIKE /BIC/CS2LIS_02_SCL,
      SCL_QTY LIKE COMM_STRUCTURE-/BIC/ZK_SCLQTY,
      GR_QTY LIKE COMM_STRUCTURE -/BIC/ZK_GRQTY.
DATA SCL_DATE LIKE SY-DATUM.
SCL_DATE = SY-DATUM + 90.
SELECT COMM_STRUCTURE -/BIC/ ZK_SCLQTY COMM_STRUCTURE -/BIC/ ZK_GRQTY FROM
/BIC/CS2LIS_02_SCL INTO SCL_QTY GR_QTY
WHERE
COMM_STRUCTURE -/0SCHED_DATE LE SCL_DATE.
IF SYSUBRC = 0
RESULT = SCL_QTY - GR_QTY.
ELSE.
What should be the return value if you dont have to    calculate the result."
ENDIF.
try it.. and see..
regards,
kishore.

Urgent Help Required in Triggers

i have a problem. i created a table total_rows which has tow columns
1) table_name 2) num_rows. this table stores table name and their corrsponding total no of rows of a particualr schema. to create this table first i analyzed the schema using dba_stats and then queried the dba_tables to get the required data.
now i want to write a trigger that will dynamically update the value of column num_rows based on insert and deltion that are being done against the table name present in table_name,. for examle suppose i have emp table as a value in table_name and table emp has 1000 rows. suppose 10 employees are deleted then the num_rows should show 990 and if 10 employees are inserted then it should show 1010.
the problem is that i can write the trigger for a single table but how do i do it for all the table whose name are in table_name columns?
please help me out. its very urgent?
regards,
amrit

Set heading off;
Set echo off;
Set verify off;
Spool c:\create_views.sql;
Select 'CREATE OR REPLACE VIEW '||table_name||'_cnt_view As Select table_name, Count(*) num_rows '||
'From all_tables'
From all_tables;
Spool off;
Set verify on;
Set echo on;
Set heading on;

Urgent Help Required - Video Not playing on IE11 and Firefox

Hi,
I need Urgent Help , I am trying to Play this Presentation on IE 11 and Firefox and it doesn't play the Video part which is FLV and f4v formats.
I have been googeling it but couldn't find a solution so far ,Can anyone please help , its really urgent as I am done with the Project ,and this is the last bit which I have been struggling with for a while now.
Here is the HTML Code I am using :
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>index</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css" media="screen">
html, body { height:100%; background-color: #ffffff;}
body { margin:0; padding:0; overflow:hidden; }
#flashContent { width:100%; height:100%; }
</style>
</head>
<body>
<div id="flashContent">
   <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="800" height="600" id="index" align="middle">
    <param name="movie" value="index.swf" />
    <param name="quality" value="high" />
    <param name="bgcolor" value="#ffffff" />
    <param name="play" value="true" />
    <param name="loop" value="true" />
    <param name="wmode" value="window" />
    <param name="scale" value="showall" />
    <param name="menu" value="true" />
    <param name="devicefont" value="false" />
    <param name="salign" value="" />
    <param name="allowScriptAccess" value="sameDomain" />
    
    <object type="application/x-shockwave-flash" data="index.swf" width="800" height="600">
     <param name="movie" value="index.swf" />
     <param name="quality" value="high" />
     <param name="bgcolor" value="#ffffff" />
     <param name="play" value="true" />
     <param name="loop" value="true" />
     <param name="wmode" value="window" />
     <param name="scale" value="showall" />
     <param name="menu" value="true" />
     <param name="devicefont" value="false" />
     <param name="salign" value="" />
     <param name="allowScriptAccess" value="sameDomain" />
    
     <a href="http://www.adobe.com/go/getflash">
      <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
     </a>
    
    </object>
    
   </object>
</div>
</body>
</html>
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->

Any Help in this Regards will be highly appreciated

BW error. Need urgent Help( I will give out full points).

We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.

Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time.

I moved from an old macbook to a new one. I copied all my files onto a hard drive. On trying to setup my mail, i went into documents, microsoft user identities, office 2011 and it shows the database but wont let me select it. Urgent help pls

I moved from an old macbook to a new one. I have installed Office for Mac 2011. I copied all my files from my old notebook onto a hard drive. On trying to setup my mail, i went into my hard drive and accessed microsoft user identities, office 2011 and it shows the database but wont let me select it. Its almost as if the file is there but not accessable. I desperately need to access my old mail. How do I do this? I am fairly confident that I copied all files off my old notebook. Is there a way for me to search for the Database file? Maybe I copied it to a different location? Urgent help please.

Hello mafrerichs and welcome to Apple Support Communities,
Simplest way is to use Target Disk mode:
How to use and troubleshoot FireWire target disk mode - Apple Support
and hook to another Mac and use CCC or SuperDuper and clone your HD to another drive.
You could also pull the drive out of your MBP and use an external USB case or SATA - USB dongle to hook it to another Mac.
"MacBook Pro (15-inch Late 2011),... have a 15" 2012 Macbook pro with 2gb of ram, i7 processor"
That's a little confusing?

Sending Details -- URGENT HELP REQUIRED! ! !

Hi,
I have a programming problem which I need urgent help with....
1.) I firstly have a HTML file which a user will fill out 3 fields on and submit.
2.) A servlet will get these parameters, validate some information and update a database.
Problem Part Needs to send on these details to another servlet which will be located on a seperate server.
Is there a way of doing a submit like function without an actual submit, as this will all be done away from the user.
Was initially going to use:
ctx = getServletContext();
rd = ctx.getRequestDispatcher("https://localhost:8443/servlet/FileName");But found out you can only do this with files in the same immediate location!
3.) Next servlet will accept in the same details as 2, and do some more functions and database updating. Before again sendin on some details to another servlet! (so same problem as in 2).
4.) Accepts in details from 3 and updaes database!
So does anbody have any ideas how this can be done??
Any help greatly appreciated.
DBM.

Whats so wrong with posting in more than one forum? I
need to get this done in the next few hours and im not
exaclt the most qualified java developer in the
world!!
sorry if its such a crime! :o(Should be obvious. You post exact question in forum A and B. Person A answers you on forum A. Person B, not knowing you were already answered because he's looking at the post on forum B, answers you on forum B, thus having wasted his time.

URGENT help on ESS-ITS

Similar Messages

Maybe you are looking for